Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.8 LAccepted-AOC ANDHRA POWER HOUSE DIVISION HPSEBL CHIRGAON 171208 | SHIMLA | HIMACHAL PRADESH | 171208 | L1 | Accepted-AOC AOC | |
| 2 | L2₹5.5 L+₹65,259.50 (13.6%)Rejected-Finance R O VILLAGE P O CHARATGARH TEHSIL DISTT UNA H P | UNA | HIMACHAL PRADESH | 174301 | L2 | Rejected-Finance L2 |
Tender Value
₹3.9 L
EMD Value
₹7,800
Closing Date
2 Sept 2020, 5:00 pmClosed
Executive Engineer, HPPWD Division Sangrah
Executive Engineer, HPPWD Division Sangrah
Maintenance of building portion)
2020_PWD_39984_9
3074-3124 dated 27.07.2020
Open Tender
Civil Works
Item Rate
120 days
Sangrah
Please refer Tender documents.
9 documents required · 9 mandatory
₹350
Executive Engineer, HPPWD Division Sangrah
₹7,800
16 Sept 2020
24 Aug 2020
3 Sept 2020
24 Aug 2020
2 Sept 2020
24 Aug 2020
Amount
Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equivalent on undecorated wall surfaces (Two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand pape smooth complete.as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.
Second class brick work using common burnt clay building bricks in Superstructure in cement mortar 1:4(One cement: Four sand) upto floor all levels as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts as per entire satisfaction of Engineer in charge.
Providing and Fixing pannelled glazed or panelled glazed shutters for doors windows and clerestory windows. Including black enammelled iron butt hinges with necessary screws, 40mm (Forty Milimetre) thick second class deodar wood as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge.
Providing and fixing wire gauge shutters using galvanised M.S wire gauge I.S guage designation 85g.(Eighty) With wire of dia 0.56 mm (Zero piont Five Six milimetre) for door windows and clerestory windows including bright finished black enamelled iron hings with necessary screws, 40mm (Forty Milimetre) thick second class deodar wood as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge
Providing and fixing bright finished hard drawn hooks and eyes window stoper 250 mm including necessary screws complete.as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.
White glazed tiles 6 mm thick in flooring, treads and landing laid on a bed of 12mm thick cement mortar 1:3 (1cement :3 sand) finished with flush pointing in white cement.as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge.
Providing and fixing anodized aluminium handles anodized transparent or dyed to required colour and shade with bolts & nuts screws etc. complete.as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.125 mm
Providing and fixing anodized aluminium tower bolts (berrel type) anodized transparent or dyed to required colour and shade with bolts & nuts screws etc. complete.as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.
Providing and fixing over head hydraulic door closer of approved brand and manufacture (conforming to IS specification ISI marked) for door with screws complete as per the direction of Engineer-In-Charge .
Providing and fixing powder coated aluminium sliding door bolts (Barrel type) anodized transparent or dyed to required shade and colour with bolts and nuts etc. complete including carriage of materials in all leads and lifts. (250x16mm)
15mm cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth ( in cement mortar 1 : 4 )as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.
Steel work welded in built up sections, trusses and framed work, including cutting hoisting fixing in position and applying a priming coat of red lead paint including carriage of materials within all leads and lifts. In gratings, framed, guards, bars ladders and railing, brackets and similar works.
Painting one coat (excluding priming coat )on previously painted wood and wood based surfaces with ready mixed paint brushing to give an even shade i/c cleaning the surface all dirt, dust and other foreign matter with ready mixed paint other than whiteas per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges. .
Extra over item No. 16043000 and 16044000 for every subsequent coat of paint with ready mixed paint other than white.
Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease, dirt and other foreign sand papering and knotting ready mixed paint brushing wood primer pink ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.
Painting two coats (excluding priming coat) on new wood and wood based surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matters with enamel paint other than white as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.
Painting two coats (excluding priming coat )on new steel and other metel surfaces under coat with ready mixed paint brushing to give an even shade i/c cleaning the surface all dirt, dust and other foreign matter with ready mixed paint other than white as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.
Providing and fixing 0.60mm th. Prepainted steel sheet in roofing with hot dipped metallic zinc coated sheetwith top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat polyster of 5microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks,bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete all accesories as required as per the direction of Engineer- IN- Charge as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.
Providing and fixing M.S. BP Sheet 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separately).as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.
Providing and fixing vitreous China wash down,water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement is to one sand) (Seat and over to be measured and paid for separately) Ordinary closet,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.
Providing and Fixing PVC water tank of ISI :-12701 marked,G.I. inlet and outlet connection, 15 mm nominal bore ball valve and mosquito proof PVC cover with locking arrangment including hoisting up to all heights above ground level. (make SINTEX having capacity of 2000 liters) as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge.
BALBIR SINGH
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .