Augmentation work for Electrical, Mechanical & Instrumentation works with 3 years Comprehensive O&M for Existing 180 MLD Terminal Sewage Pumping Station (TSPS) at Pirana of Ahmedabad Municipal Corporation (AMC)

Name of Work : Augmentation work for Electrical, Mechanical & Instrumentation works with 3 years Comprehensive O&M for Existing

180 MLD Terminal Sewage Pumping Station (TSPS) at Pirana of Ahmedabad Municipal Corporation (AMC)

Earnest Money Rs. : Rs. 10,36,300/-

Date of Opening of Tender :

Estimated Price : Rs. 10,36,27,471/-

1) I / We am / are willing to carry out work at _________ % above/below percent (in figures) (should be written in figures and words) of the

estimated cost, as mentioned above. Amount of my / our tender works out for Rs. ________________ (in figures)

Estimated amount put to tender Rs. Estimated amount put to tender Rs.

Signature of Contractor

Company’s seal :

SUMMARY FOR SCHEDULE OF QUANTITIES & RATES FOR AUGMENTATION WORK OF ELECTRICAL,

MECHANICAL & INSTRUMENTATION WORKS WITH 3 YEARS O&M FOR FOR EXISTING 180 MLD

TERMINAL SEWAGE PUMPING STATION (TSPS) AT PIRANA OF AMC.

SR. NO. ITEM DESCRIPTION TOTAL AMOUNT

SR. NO. ITEM DESCRIPTION TOTAL AMOUNT

A MECHANICAL WORKS

B ELECTRICAL WORKS

C INSTRUMENTATION WORKS

TOTAL OF ELECTRO-MECH. CAPITAL COST W/O GST

E OPERATION & MAINTENANCE WORK FOR 3 YEARS

TOTAL OF EMI WORK WITH 3 YEARS O&M WITHOUT GST (I

SCHEDULE OF QUANTITIES AND RATES FOR SITC OF AUGMENTATION WORK OF CIVIL, ELECTRICAL, MECHANICAL &

INSTRUMENTATION WORKS FOR EXISTING 180 MLD TERMINAL SEWAGE PUMPING STATION (TSPS) AT PIRANA OF

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

1.1.1 MECHANICAL WORKS 2 Set 56,31,340

NON-CLOG SEWAGE SUBMERSIBLE PUMP MOTOR SET:

Supply, Installation (in Existing sump/wet well), Testing and Commissioning (SITC) of

Submersible NC Pump-Motor set suitable for sewage application with semi-open or

enclosed or suitable type Impeller with motor suitable for 3-Phase, 415 V, 50 Hz., AC

induction Air filled dry type VFD Operated energy efficient submersible electric drive

motors of mini. rating as specified below, insulation Class 'H' With temp. rise limited to

class F and IP-68 protection.

The scope shall include all required accessories viz. automatic coupling device, double

guide pipes, chain with shackles, Submersible Power & control cable (copper flexible &

stranded type conductor of reqd. cores & size for each pump motor set) & length of 25 m

long each run with necessary electrical termination connection at junction box / starter

panels, Pre-Cast RCC foundation with duck foot bend for auto coupling & delivery

bend and PMU etc. as per equipment data sheet and detailed technical specifications and

also including in scope any other parts / accessories / fittings required to complete the

work in all respects & satisfactory operation of pump set.

Pump Capacity: 3000 m3/hr, Head: 20 m, RPM: 1000 & Motor Rating: Minimum

kW (or higher as recommended by pump manufacturer), Over all Minimum Acceptable

Efficiency at Duty Point: 74%.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

1.2.1 VERTICAL CENTRIFUGAL NON-CLOG PUMP-MOTOR SET 4 Set 7,62,181

Supply, Installation, Testing and Commissioning of vertically mounted non-clog (VNC),

back pull out, end suction type vertical centrifugal pump for raw sewage application with

CI IS: 210 Gr. FG 260 (with 2% Ni) Casing & Casing Cover, CF8M impeller & wearing

ring, SS 410 shaft, Universal shaft type metallic Flexible coupling of required length as

per site requirement (approx. 3.0 m length), along with suitable electric AC induction

motor of following rating, having max. synchronous speed as specified, suitable for 3 ph,

415 v, 50Hz AC supply coupled through universal flexible metallic shaft coupling as per

site requirement along with required accessories like SS sole plate, foundation bolts,

stuffing box leakage piping, etc. and as per specification. The scope also includes RCC

pump foundation as required as per site condition and as per specification and complete

in all respect.

SITC of approved make, energy efficient, VFD operated motors shall have vacuum

impregnated, double insulation winding with Class H insulation and with temperature

rise limited to class F of inverter duty, Efficiency Class-IE3, Vertical flange mounting,

solid shaft, squirrel cage, Induction Motor of min. following rating or higher as per IS

and as per pump manufacturer recommendation, 3Phase, 415V, 50Hz., AC supply with

RTD/BTD & space heater and as per specification and complete in all respect.

Capacity: 2000 m3 / hr (VNC Pump Type-1),

Motor Rating: mini. 160 kW (or higher rating as reco. by pump manufacturer)

Speed: 1000 RPM max.

Pump Efficiency at Duty: min. 80.5 %

Note: Following is also included in the scope of work of this items.

1. All required civil works/fixing/strengthening/anchoring/grouting etc. as per

specifications/pump manufacturer's recommendation & ensure completion work in all

respects including ensuring satisfactory erection & performance/operation of pump-

1.2.2 --- Item description as above --- 4 Set 9,06,379

Capacity: 3000 m3 / hr (VNC Pump Type-2),

Motor Rating: mini. 250 kW (or higher rating as reco. by pump manufacturer)

Speed: 1000 RPM max.

Pump Efficiency at Duty: min. 81.5 %

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

SITC of CI / DI Double Flanged Electric Actuator Operated Non Rising spindle Knife

Gate Valves conforming to MSS SP-81 1995, PN 1.0 with SS gate, EPDM seal, SS

rising spindle with all Stainless steel hardware, gaskets, & handwheel for emergency

operation etc. complete as per IS and Specification.

Size: 600 mm NB (At delivery line of VNC Pump Type-1),

2.1.2 --- Item description as above --- 10 Nos. 1,79,780.00

Size : 700 mm NB (At delivery line of VNC Pump Type-2, Suction of VNC Pump Type-

1, At delivery line of Subm. NC Pump)

2.1.3 --- Item description as above --- 4 Nos. 2,38,050.00

Size : 800 mm NB (At Suction of VNC Pump Type-2)

2.2.1 SITC of CI/ DI double flanged Dual Plate Check Valve conforming to API 594, Class 4 Nos. 2,17,494.00

125 with Cast Steel dual door, hinge pin & stop pin of SS 410, springs of AISI 304 and

seat of SS 304, along with all required accessories, gaskets and hardwares, etc. and as per

specification & complete the work in all respects.

Size: 600 mm NB (At delivery line of VNC Pump Type-1),

2.2.2 --- Item description as above --- 6 Nos. 3,26,619.00

Size : 700 mm NB (At delivery line of VNC Pump Type-2, At delivery line of Subm. NC

2.3.1 SITC of CI/DI Double Flanged Manually Operated Sluice Valve conforming to IS 2 Nos. 3,052

14846, PN 1.0 with SS 304 seat rings and SS spindle with hot dipped galvanised

hardware's, bolts, nuts & washers, gaskets, etc. as per data sheet.

Size : 80 mm NB (At Drain pump Del. line)

2.4.1 SITC of Non slam, flanged, Single Door type Non Return Valve conforming to IS 5312 2 Nos. 4,346

(Part-1), PN 1.0, having C.I./DI body and door, CF8M seat rings alongwith all necessary

hardwares as per specifications and complete in all respect.

Size: 80 mm NB (on delivery of each drain pump)

3.1.1 SITC of Flange ends Expansion Bellow (PN 1.0) as per EJMA standards and as per 4 Nos. 29,280.00

specs. and complete in all respect.

Size : 600 mm NB X 300 mm L (At delivery line of VNC Pump Type-1),

3.1.2 --- Item description as above --- 10 Nos. 37,560.00

Size : 700 mm NB X 300 mm L (At delivery line of VNC Pump Type-2, Suction of

VNC Pump Type-1, At delivery line of Subm. NC Pump)

3.1.3 --- Item description as above --- 4 Nos. 47,976.00

Size : 800 mm NB X 300 mm L (At Suction of VNC Pump Type-2)

3.1.4 --- Item description as above --- 1 Nos. 1,69,952.00

Size : 2000 mm NB X 450 mm L (Near Header Flow meter)

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

4.1.1 MS PIPES & SPECIALS 16 m 11,080.63

Supply, Gas cutting of pipe, Fabrication of reducer & expander, welding, Installation,

testing and commissioning of MS pipe, Specials, reducer, expander, bend for Y-Joint

with header, etc. conforming to IS 3589 flanges confirming to IS 6392-PN-1.0,

fabricated from MS. plate with necessary supports & anchoring. Pipe fabricated from MS

plate. (Excluding supply of flange) and complete in all respect.

Size : 610 mm OD x min. 10.0 mm Thk. (At delivery line of VNC Pump Type-1),

4.1.2 --- Item description as above --- 48 m 12,907.61

Size : 711 mm OD x min. 10.0 mm Thk. At delivery line of VNC Pump Type-2, Suction

of VNC Pump Type-1, At delivery line of Subm. NC Pump)

4.1.3 --- Item description as above --- 16 m 14,781.07

Size : 813 mm OD x min. 10.0 mm Thk. (At Suction of VNC Pump Type-2)

4.1.4 --- Item description as above --- 40 m 58,529.00

Size : 2032 mm OD x min. 16.0 mm Thk. (At Header line)

4.2.1 Supply, Welding, Installation, Testing & Commissioning of MS flat machined faced 6 No. 4,650.00

flanges confirming to IS 6392 & drilled as per IS-1538 with drilling off centre bolt holes

and flange thickness as per PN 1.0 including cutting & welding.

Size : 500 mm NB (Drilled) (as per actual delivery line of VNC Pump Type-1 & as per

actual delivery line of Subm Pump)

4.2.2 --- Item description as above --- 8 Nos. 5,670.00

Size : 600 mm NB (Drilled) (as per actual delivery line of VNC Pump Type-2 & as per

actual Suction line of VNC Pump-1)

4.2.3 --- Item description as above --- 4 Nos. 7,450.00

Size : 700 mm NB (Drilled) (as per actual Suction line of VNC Pump-2)

4.2.4 --- Item description as above --- 20 No. 5,670.00

Size : 600 mm NB (Drilled)

4.2.5 --- Item description as above --- 40 Nos. 7,450.00

Size : 700 mm NB (Drilled)

4.2.6 --- Item description as above --- 8 Nos. 9,370.00

Size : 800 mm NB (Drilled)

4.2.7 --- Item description as above --- 3 Nos. 39,440.00

Size : 2000 mm NB (Drilled)

4.2.8 --- Item description as above --- 1 Nos. 9,720.00

Size : 600 mm NB (Drilled Blind)

4.2.8 --- Item description as above --- 1 Nos. 13,820.00

Size : 700 mm NB (Drilled Blind)

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

4.2.8 --- Item description as above --- 1 Nos. 18,690.00

Size : 800 mm NB (Drilled Blind)

4.2.9 --- Item description as above --- 1 Nos. 1,52,410.00

Size : 2000 mm NB (Drilled Blind)

4.3.1 G.I. PIPES & FITTINGS: 60 RMT 716.00

Supply, installation, connection with equipments as required, testing and commissioning

of GI pipe conforming to IS-1239, Heavy Duty with coupling, tee, bend, union, elbow,

flanges, etc. as all required fittings for connection complete with gaskets, hardware, and

required accessories as per IS & Specifications

Size: 80 mm dia. (For Drain Pump Del.)

5.1.1 Flanged Joints of Pipes, Fittings and Specials: 8 Nos. 3,217.00

Supply, Installation, Making of Flanged DI /CI / GI / MS Pipes, Fittings and Specials

Joints with all jointing materials, rubber packing, nut bolts, labour etc.for complete

Size : 600 mm dia.

5.1.2 --- Item description as above --- 16 No. 3,988.00

Size : 700 mm dia.

5.1.3 --- Item description as above --- 4 Nos. 5,174.00

Size : 800 mm dia.

5.1.4 --- Item description as above --- 1 Nos. 14,340.00

Size : 2000 mm dia.

6.1.1 MONORAIL EOT WITH ELECTRIC CHAIN HOIST 1 Set 3,38,910

SITC of Electrically Operated Chain Hoist & Electrically operated Trolley, suitable to

operate on Mono Rail Girder having motorised motion, mfg. as per IS:6547-1972-Class-

II & IS-3177- Class-II, complete with brake, chain-gear, motors, safety device, pendant

push button, starter panel, cables from motor to starter panel and all other required

accessories like limit switches, power supply system (Fastoon cable type), fasteners,

epoxy painting, etc. tested for over load as per IS and as per specs, complete in all

Capacity : min. 3.0 Ton. (at Ex. Screen Chamber, For Manual Screen)

Lift : 15.00 m as mini. or as per site req.

Bay Length : 11.0 m or as per site req.

(w/o MONORAIL GIRDER & MS supporting structure)

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

6.2.1 SITC of Single Girder type E.O.T. crane with electrically operated hoist, class II duty, 1 Set 7,28,250

geared travelling trolly with lift as specified here below complete with long travel rail

track (40 sq.mm. bar), moving or cross girder, all three motions electrically operated by

suitable rating motor IP54, control panel, & down pendant control block, brake, safety

device, cables from motor to starter panel & other required accessoaries & manufactured

and tested as per IS-807, IS-3938 & IS-3177, class-II, complete as per IS &

Specifications.

Capacity: min. 7.5 Ton, (at Wet Well, For SUBM. PUMP MOTOR SET)

Span: Approx 8.2 m (or as per site)

Lift: 15.0 m (or as per site)

Bay length: App. 15.00 m (or as per site)

Note: 1. Minimum as specified capacity or higher as per requirement such that EOT

crane capacity is min.1.25 times of the Subm. pump set or single heaviest component to

be lifted within pump house.

2. Bidders shall be responsible for survey & obtaining dimensions of existing Sump &

associated existing units.

6.3.1 GRIT REMOVAL MECHANISM 1 Set ###########

SITC of Grabbing EOT crane with double girder and having three dimensional

movement, manufactured as per IS -807 & IS-3177 , class-II complete with brake, wire

rope drum, trolley, hydraulically operated Bucket mechanism, motors, control panel,

fasteners,etc complete as per data sheet and specifications and suitable for motorised

motion in all three directions & complete the work in all respects & satisfactory

operation of Grab Bucket mechanism.

Crane Capacity : 5 Ton (min. or higher as required for required 0.5 m3 capacity)

Bucket Volumetric Capacity: 0.5 m3

Hoisting speed : 3 m/min.

Cross Travel Speed: 10 m /min.

Traverse speed : 10 m / min.

Lift : approx. 14.5 m (or as per Ex. Site).

Span : approx. 15.0 m (or as per Ex. Site)

Bay Length : approx. 25.0 m (or as per Ex. Site)

Note: Bidders shall be responsible for survey & obtaining dimensions of existing

Inlet/Grit chamber & associated existing units.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

7.1.1 SITC of Box Type Manual mesh Screen having following size, made of SS 304 2 set 6,44,090

material having round bars of size 9.0 mm dia with clear bar opening as specified here

below, suitably welded in outer frame of equal Leg SS angle of size 50 mm x 50 mm x

mm thick or higher, with intermediate support at required locations, complete as per

specs. & shall also including followings:

The screen shall be with SS perforated Screening Material Collection Box at bottom

end of Screen having size as specified, fabricated from 3 mm thk SS sheet, screen shall

be suitable to slide complete screen through rollers between Proposed guide passage of

MCP 400, embedded/ fixed in wall on both sides of RCC wall up to top of chamber with

all necessary hardware, SS nuts, bolts & wahsers, sacrificial Brass lugs on sides, min.

two lifting lugs/hooks & SS lifting chain having intermediate link/chain of 150 mm dia.

at every 1.5 m distance with shackle, etc. complete in all respects and provided with 1 set

of cleaning rake with each screen, complete as per specification and complete in all

For prevention of overflow above the screen portion of channel height above screen shall

be provided with MS cover plate of minimum 12mm thickness with 50 mm dia.

perforations up to 4 meter height above the screen complete in all respects as per

specifications.

Screen Size: 3000 mm (W-or actual chamber width as per site ) x 2500 mm (H) x

Box Size: 3000 mm (W-or actual screen width) x 300 mm (H) x 300 mm (D)

Opening: 50 mm x 50 mm sq. opening

Following is also included in the scope of work of this items.

1) All required modification-alteration/fixing/ strengthening/anchoring/grouting etc. to

ensure safe & fullproof erection & completion of work in all respects including ensuring

satisfactory erection & operation of manual screen

2) Screen shall be suitable for 3100mm wide screen chamber or to suit actual site

3) Satisfactory erection & Movment of equipment shall be responsibility of bidder.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

8.1.1 Supply, installation, testing and commissioning of Mechanical Coarse Bar Screen with 2 set 1,21,65,570

multiple rake blades, in SS 304 having 75 deg. angle of inclination to horizontal, having

20 mm clear opening between bars of size 10 mm thick and 50 mm depth suitable for

installation in screen chamber of about 3.1 m wide X 10.5 m deep with max. 2.3 m LD

and screen having clear inside width of min.2700-2800 mm to suit channel width & with

vertical bar height of 4.5 m, along with electrical control panel suitable for auto-manual

operation, screening disposal arrangement up to ground level to drop on belt conveyor

with all accessories & SS hardware’s, etc. as per Site condition & Specification &

complete in all respect.

Rakes shall be provided for every 1.5 to 2.0 m screen channel depth. The chain shall

have a breaking load of min. 140 kN.

Following is also included in the scope of work of this items.

Note : 1. Screen shall be suitable for 3100mm wide screen chamber or to suit actual site

2. All required modification / fixing / strengthening / anchoring /grouting etc. to ensure

safe & fullproof erection & completion of work in all respects including ensuring

satisfactory erection & operation of Mechanical Coarse Bar Screen.

8.1.2 BELT CONVEYOR 1 set 6,67,150.00

The Belt coveyer shall be with sufficient length to cover all Two screen chamber

approx. 8.5 m long X 600 mm wide or highet length as required,

complete as per specifications and complete the work in all respects & satisfactory

operation of Belt coveyer.

9.1.1 Providing, Supply of Structure Steel at site of work with freight, loading, unloading 5000 kg. 64.84

carting, etc. including all taxes and duties complete such as joints, channels, angles, Iron

Rails, ISA/ISMC/ISMB/MS flat, Plates, Chequered plates (min. 8 mm thickness) for

cable trench etc. required for support structure of all Electro-mechanical equipment,

piping, etc. for support on floor / wall / beam / brackets etc. as per tender and IS.

9.1.2 Labour Charges for lowering, laying, Fixing with fabrication various size section of MS 5000 kg. 11.37

such as joints, channels, angles, Iron Rails, ISA/ISMC/ISMB/MS flat, Plates, Chequered

plates, for cable trench etc Complete with two coats of red oxide and two coats of

approved colour shade of epoxy paint as per relevant IS and as per specification.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

10.1.1 DEWATERING / DRAIN PUMP (FOR DRY WELL) 2 Nos. 1,89,463

SITC of Subm. Non Clog Dewatering Pump with C.I. casing & CF8M impeller,

including necessary accessories and hardwares, etc., 25m cable as requied suitable for

Phase, 415 V, 50 Hz AC supply with min. 5.0 HP motor and necessary safety features

along with required starter panel, pump monitoring unit for auto stop facilities, cable

termination / junction box of required terminal size, supporting arrangement for pump

and other required accessories to be installed in dry well drain pit.

Pump Capacity: 25 m3/hr.

Motor Rating: min. 5.5 kW (or higher rating as reco. by pump manufacturer)

11.1.1 Supply and testing of Submersible Non Clog Portable Dewatering Pumpset with C.I. 1 No. 2,11,832

casing & CF8M impeller, 30 m flexible PVC hose pipe of pump delivery size, rated for

6.0 kg / cm2 presure, 15 mtr SS lifting chain, 20m pair of cable for motor to starter panel,

suitable for 3Phase, 415 V, 50 Hz AC supply and min. motor rating as indicated here

below, Switch-Starter panel with PMU suitable inter lock for winding protection,

moisture controller for fault detection and auto stop facility, with buit-in level switch for

dry run protection and auto stop facility, 20 m suitable size power supply cable to starter

panel, GI/CI/MS pump stool and other required accessories for wet well.

Pump Capacity : 50 m3 / hr.

Motor Rating: min. 7.5 kW (or higher rating as reco. by pump mfg.)

12.1.1 MISCELLANEOUS WORK 1 Lot 3,60,000

Dismantling / removal in existing SPS like 8 nos. VNC Pump set, Pipes & fittings,

Valves, Bellows, Grab Bucket Mechanism, Mech. Screen, Belt Conveyer, HT Panel, LT

Panel, Transformer, Bus Duct, Caballing system, Earthing system, Indoor & Outdoor

lighting system etc. any other equipment’s not listed here in but installed in TSPS &

required to be dismantled / shifting and including all Loading, Transportation, Unloading

& Stacking them at Store or location as per instruction of Engineer-In-Charge of AMC

and as per the tender scope / BOQ.

12.1.2 Modification / Constructing / Casting of RCC Foundation block work for New VNC 8 Nos. 20,000

Pump-Motor Set as per manufacturer’s recommendation, PCC / RCC Support including

cement, sand, grit, kapachi, water, steel bars, scaffolding materials, curing, finishing,

plastering, painting complete in all respect

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

12.1.2 All Miscellaneous Civil Work including modification, providing cut-outs, core cutting, 1 Lot 2,50,000

repairing / finishing works etc. providing RCC support of valves, pipes & fittings,

grouting work, Required civil works including modification, finishing work for existing

pump house flooring, etc. in pump house and any other unforeseen / emergency work

during dismantling of existing pump & during installation in existing running pump

house/Sump etc. and all other as required to complete the work in all respects and as

required for installation and satisfactory operation of all electro-mech. equipment’s and

instruments items as per the tender scope / BOQ. and any other work not listed here in

but required at Site/location as per instruction of Engineer-In-Charge of AMC and as per

the tender scope / BOQ.

13.1.1 All-in-One Computer with 27-inch FHD (1920 x 1080) Display, Intel Core i7 (13th 1 Set 1,00,799

Generation) Processor, 16 GB RAM, 1 TB SSD Storage, Pre-installed Windows

Operating System and Microsoft Office Suite 2024 or above or 365, with a dedicated

Graphics Card of minimum 2 GB.

A TOTAL OF MECHANICAL WORK WITHOUT GST

SCHEDULE OF QUANTITIES AND RATES FOR SITC OF AUGMENTATION WORK OF CIVIL, ELECTRICAL, MECHANICAL &

INSTRUMENTATION WORKS FOR EXISTING 180 MLD TERMINAL SEWAGE PUMPING STATION (TSPS) AT PIRANA OF

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

1.1 ELECTRICAL WORKS 1 Set 1,328,836.80

H.T. INDOOR SWITCH GEAR PANEL

SITC of 11 kV, 500 MVA, 630A, Indoor, Extensible type, Horizontal draw out,

Motorised spring charging mechanism, 3 breaker Vacuum Circuit Breaker Panel (1

No. Incomer + 2 Nos.outgoing), with EC grade copper busbars along with required

Resin cast CT Dual primary & secondary, Cl: 0.5/5P10, 15VA, Digital MFM with RS

485 with 3 Line Display, Class-0.5s and PT (dual secondary) Cl:0.5/3P, min 200VA or

higher for metering and protection, 110V DC power pack for incoming & outgoing

feeder, Annunciator, Hooter, Indicating lamps, Numerical Protection relay

(Current & Voltage Based) with RS 485 with combined protection for 3O/C+1E/F, S/C,

Under & Over Voltage, Transformer Protection Aux. relay etc. High speed tripping

relay, Trip ckt supervision relay, Fuse failure relay, Digital Power factor meter,

Ammeter, Voltmeter (Only I/C), A/M switch suitable for PLC/SCADA etc. complete in

all respects as per IS, Specification.

1.2 SITC of H.V. CABLES 100 Mtr. 2,217.96

SITC of 11 kV (E), 3C x 240 sq.mm., Aluminium, extruded innersheath, Armoured,

XLPE , H.V Cable as per IS 7098 (part 2) and Tech. Specification.

(Torrent HT Room to AMC proposed HT Panel room, AMC HT Panel to TFR 1 & 2)

1.3 SITC of the Indoor Heat shrinkable Termination: 6 Nos. 4,798.00

SITC of Indoor H.T. cable end terminations Kit for 11 kV (E), 3C x 240 sq.mm. XLPE

armoured cable with all accessories as required.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

2.1 DISTRIBUTION TRANSFORMER 2 Nos. 2,548,542.09

SITC of 1600kVA, 11/0.433 kV, Outdoor Transformer continuously rated, 3-phase,

Hz, OFF Load Tap Changer (OCTC) , ONAN cooled, copper double wound core type,

vector group Dyn11, Delta(HT)/Star(LT), Oil immersed winding with temperature rise

in oil / winding 40/45 deg.C above design temperature with neutral brought out to

connect to separate earthing including Terminal arrangement bushing / cable Box on HT

side & BUS DUCT on LT side, first fill of oil along with Fittings & accessories as per

Energy efficiency Level-1 of IS:1180 (Part-1):2021 and its latest ammendments and as

per Tender Specification.

Note: Transformer shall be suitable for parallel operation. Minimum requirement

shall be as below:

Both transformer shall have " Identical X/R ratio, phase angle shift, polarity, phase

sequence, frequency, position of tap changer. Turns ratio & voltage ratio".

2.2 Casting of transformer new plinth / foundation including design as per transformer full 2 Set 60,000.00

total weight load capacity / Transformer vendor recommendation / requirements. Top of

transformer foundation shall be mini. 900mm above finished ground level & two nos.

padestal foundation of size minimum 2m x 2m each or higher as per vendor / statutory /

electrical inspector requirements with situ reinforced cement concrete in M 20 using

granite, quartzite trap metal of size 6 mm to 20 mm for RCC work including providing

of 53 grade cement & Fe 415 grade TMT bars, scaffolding, centering, form work, curing

etc. complete in all respect to install new Transformer.

2.3 Transformer temp. rise / Heat run test charges for above rating transformer @ 1 Set 95,100.00

manufacturers works.

2.4 Transformer full load losses & impedance test charges at ERDA Laboratory for 1 Set 190,190.00

confirmation of Guaranteed full load losses for above rating transformer.

2.5 (a) Supply and levelling of Switchyard & transformer yard using gravel, fine sand and other 75 Sq.m. 340.00

required filing material, enmarked for the Switchyard & Transformer yard including

removing of trees or boulders etc. if any. The general level of the yard shall be at a

convenient level for movement of man and material and it should match with FGL and

as per Specification and Drg.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

2.5 (b) Supply and Installation of GI Chain link fencing frames with L angle/Channel post 30 RMt. 1,060.00

around Switchyard & Transformer yard etc. as per Specification and Drg.

2.5 (c) SITC of 3.0 mtr wide gate with GI chain link as per Specification and Drg. 2 Nos. 10,660.00

3.1 LT BUS DUCT 35 Mtr. 26,192.33

SITC of 2500A, 4P, 415V Sandwich Aluminium Busduct with 3Phase + 100% N +

50% Integral Earthing & 2 Runs of 50 x 6 mm Aluminium earthing. Design Temp. shall

be 50°C & suitable for Indoor (IP55) / outdoor (IP 65) application etc. with required

termination adaptor box for both end and with required necessary supporting structure

etc. as required for Transformers as per IS & Specifications complete in all respect.

SITC of 2500A, 415V FP (RYBN) set Copper Flexible (Braided) for both Transformer

end and for LT Panel panel end including required 90° bends, flange ends, Adopter

boxes, Terminal links etc. for Sandwich Aluminium Busduct as per IS & Specifications

complete in all respect.

(The supplier has to check/measure the exact quantity prior to ordering as per site

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

4.1 LOW VOLTAGE (LT) PANEL BOARD (PMCC) : 1 Set 6,987,500.00

SITC of PMCC Panel (50kA), compartmentalized, floor-mounted, with a maximum

operating height of 1800/1900mm, extensible on both ends, suitable for manual and

automatic operation (local and via PLC/SCADA) as per site conditions. This includes

replacing the existing bus duct with a new bus duct within the existing space, performing

any necessary modifications/rectifications to accommodate the new PMCC panel

without damage to the installed/proposed bus duct. The work must be completed in all

respects as directed by the Engineer-in-Charge of the AMC, according to the Tender

SLD/Specification/IS, and include, as a minimum, the following:

(1) INCOMER 1&2 (For Bus Duct entry & Top entry) : FP, 2500A, 50 KA

Microprocessor EDO ACB LSIG with inbuilt RS 485 MODBUS communication with

Digital Voltmeter with VSS, Digital Ammeter with ASS, Resin Cast CT-Cl : 0.5,10VA,

Digital MFM with RS 485 with 3 Line Display Cl. 0.5, Breaker Control Switch (TNC),

A/M, L/R switch, Indicating lamps, Push bottons etc,. with electrical & mechanical

interlocking between Incomers and buscoupler.

(1.1) Surge protection device, 3P + N, Type 2 for lightning/surge protection. Load

sensing CT in Incomer & Busbar for APFC Panel, Cl.-0.5. Constant voltage/control

voltage transformer 2000VA, 415V/230V AC, with tapping +/-5% in steps of 2.5%,

32A DP MCB & 25A Power contactor.

(2) BUS-COUPLER: FP 2500A ACB (same as per Incomer)

(2.1) 2500A TPN, EC grade AL Main busbars. (Busbars size as per 50KA fault level and

Temperature rise with current density 0.8A/Sq.mm)

(3) TRANSFORMER FIXED COMPENSATION FEEDER (50 KVAr) : 2 Sets:

Each feeder comprising of 125 A TPN Thermal magnetic Based (TM) MCCB with

Digital Ammeter, ASS, CT, Indicating lamp, etc.complete in all respects.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

(4) 640 KVAR APFC POWER FEEDER: 2 NOS: rate incl in

Each feeder comprising of 1600A TPN TM EDO ACB, 50 KA, LSIG with inbuilt RS above price

485 MODBUS communication with Digital Ammeter, ASS, CT, Breaker Control Switch

(TNC), A/M switch, Indicating lamps, Push bottons with etc.complete in all respects.

(5) 630A POWER FEEDER FOR 250 KW VFD PANEL : 2 NOS :

Feeder comprising of 630A TPN Microprocessor MCCB LSIG, 50kA, Digital MFM

with RS-485 Cl. 0.5, CT, Indicating lamps, etc.complete in all respects.

(6) 400A POWER FEEDER FOR 160 KW VFD PANEL : 2 NOS :

Feeder comprising of 400A TPN Microprocessor MCCB LSIG, 50kA, Digital MFM

with RS-485 Cl. 0.5, CT, Indicating lamps, etc.complete in all respects.

(7) 400A POWER FEEDER FOR 300A AHF PANEL : 2 NOS :

Feeder comprising of 400A TPN Microprocessor MCCB LSIG, 50kA, Digital MFM

with RS-485 Cl. 0.5, CT, Indicating lamps, etc.complete in all respects.

(8) STAR-DELTA STARTER FOR 250KW MOTOR (VNC PUMP) : 2 NOS :

250 KW or higher as per pump manufacturer recommendation Star-delta starter with

min.630A TPN MP MCCB (LSIG) with Adjustable O/L & Adjustable S/C protection,

650A AC3 duty contactors (3 Nos), O/L Relay, star-delta timer, MFM with RS-485,

Resin Cast CT Cl: 0.5, MPR with RS-485, CBCT, SPP,Space heater, Minimum Eight-

Channel Temprature Scanner with Rs-485, A/M, L/R switch, ON, OFF, TRIP Indication

& Start, E-Stop & Reset pushbutton etc. for S/D starter. complete in all respects, &

LCS (PBS) for Suction & Delivery Actuator-valve with 16A FP MCB, open,close,stop

PB, open,close,trip & L/R indication & 2 nos. terminal strip, SP MCB etc.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

(9) STAR-DELTA STARTER FOR 160KW MOTOR (VNC PUMP) : 2 NOS : rate incl in

160 KW or higher as per pump manufacturer recommendation Star-delta starter with above price

min. 500A TPN MP MCCB (LSIG) with Adjustable O/L & Adjustable S/C protection,

300A AC3 duty contactors (3 Nos), O/L Relay, star-delta timer, MFM with RS-485,

Resin Cast CT Cl: 0.5, MPR with RS-485, CBCT, SPP,Space heater, Minimum Eight-

Chhanel Temprature Scanner with Rs-485, A/M, L/R switch, ON, OFF, TRIP Indication

& Start, E-Stop & Reset pushbutton etc. for S/D starter. complete in all respects, &

LCS (PBS) for Suction & Delivery Actuator-valve with 16A FP MCB, open,close,stop

PB, open,close,trip & L/R indication & 2 nos. terminal strip, SP MCB etc.

(10) STAR-DELTA STARTER FOR 250KW MOTOR (SUBM. PUMP) : 2 NOS

250 KW or higher as per pump manufacturer recommendation Star-delta starter with

min. 630A TPN MP MCCB (LSIG) with Adjustable O/L & Adjustable S/C protection,

650A AC3 duty contactors (3 Nos), O/L Relay, star-delta timer, MFM with RS-485,

Resin Cast CT Cl: 0.5, MPR with RS-485, CBCT, SPP, PMU as per pump vender Reco.,

A/M, L/R switch, ON, OFF, TRIP Indication & Start, E-Stop & Reset pushbutton etc.

for S/D starter. complete in all respects, & LCS (PBS) for Suction & Delivery Actuator-

valve with 16A FP MCB, open,close,stop PB, open,close,trip & L/R indication & 2 nos.

terminal strip, SP MCB etc.

(11) 63A TPN TM MCCB FEEDER : 10 Nos. (1 no. for EOT Crane at VNC P.H.,

no. for EOT Crane at SCF pump, 1 no. for Grab bucket mechanism, 2 nos. for

Drain Pump for Dry Pit at VNC P.H., 2 nos. for Portable Drain Pump, EOT with

ECH for manual screen, 2nos. Spare)

Each feeder comprising of 63A TPN Thermal Magnetic (TM) MCCB, with indicating

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

(12) 32A TPN TM MCCB FEEDER : 4 Nos. :(2 nos. for Mechnical Screen Panel, 2 rate incl in

nos. Spare) above price

Each feeder comprising of 32A TPN Thermal Magnetic (TM) MCCB, with indicating

(13) 63A TPN TM MCCB FEEDER FOR ALL MCB FEEDERS: 2 sets:

Incomer: 63A TPN Thermal Magnetic (TM) MCCB, with indicating lamps etc.

a) 6nos. 32A 'C' curve 4P MCB feeders (1no. for ICP/PLC Panel, 2nos. for Indoor LDB,

b) 4nos. 16A 'C' curve DP MCB feeders (2nos. for Tr. MB, 1 no. HT Panel., 1no. Spare)

c) 1 no. 32A 'C' curve 4P MCB with Time switch,32A contactor 4P,ON lamp feeders

(for Outdoor LDB)

d) 4nos. LCS (PBS) with 16A FP MCB, indicating lamp,Push Button, A/M,L/R switch,

SP MCB, etc. (2 nos. for MOG at screen Inlet chamber, 1no. for MOG at sump

interchange compartment, 1no MOV at Header)

(14) Multiplication relay as required for dry run protection of pumps.

NOTE: 1) For All Actuator LCS (PBS) shall be provide potential free contact for

(open,close,trip & L/R ) indication and terminal for Open,close and stop command

because actautor shall be operator from PLC Panel also in addition to LCS (PBS).

(2) All MCCB shall be 50KA, Ics = 100% Icu, inbuilt protection with adj O/L and

Adj.S/c (LSIG for MP MCCB),Extended rotary handle, Terminal spreader,

Auxiliary Change over contact and trip contact as required.

(3) All MFM, ACB, Soft Starter,MPR,Temp.Scanner etc shall be with inbuilt RS

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

4.2 STAND ALONE VFD CUBICLE PANEL FOR 250KW VNC PUMP :- 2 Set 735,000.00

SITC of Standalone VFD Panel (LT MCC panel, 50kA) for Min. 250kW Motor,

compartmentalized, Floor Mounted / stand mounted as per site condition / requirement,

operating height maximum 1800/1900 mm, Extensible on both ends, suitable for Manual

& Auto operation. Auto operation & moitoring through PLC/SCADA; Manual from

panel when in remote mode complete in all respects as per Tender SLD / Specification /

IS and including following as minimum:

Panel comprising of Min. 630A TPN Microprocessor MCCB LSIG as incomer,VFD

with inbuilt RS 485 for 250 kW Motor or higher as per pump manufacturer reco. with

VFD rating minimum (510A @ 50°C) with suitable derating with detachable type door

mounted display key pad, 550A, AC3 duty Line contactor, Semi conductor fuse, Input

Choke having Max. 2% voltage drop shall be provided, rating as recommended by VFD

manufacturer & Output choke as recommended by VFD OEM for harmonic mitigation,

VFD with 3C3 Confromal coating, MFM Cl. 0.5 with RS-485, Resin Cast CT Cl: 0.5,

SPP, Space Heater, 8 channel temprature scanner with RS485, A/M, L/R switch, R,Y,B,

On, Off, Trip, Speed Up & Speed down Indicating lamps, Start, Stop, Speed Up & down

Push buttons with LCS (PBS) for Suction & Delivery Actuator-valve with 16A FP

MCB, open,close,stop PB, open,close,trip & L/R indication & 2 nos. terminal strip, SP

MCB etc. Heavy duty 8" Metalic Housing and Metal Impeller / Blade / Vanes of

Minimum 2nos. or higher as required at the top of the panel with canopy/hood etc.

Voltage and current harmonics shall be as per recommendations of the IEEE-519

or latest revision.

Note : For Actuator LCS (PBS) shall be provide potential free contact for

(open,close,trip & L/R ) indication and terminal for Open,close and stop command

because actautor shall be operator from PLC Panel also in addition to LCS (PBS).

STAND ALONE PANEL MINIMUM SIZE: 1.2M (W) X 1.5M (H) X 1.0M (D)

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

4.3 STAND ALONE VFD CUBICLE PANEL FOR 160KW VNC PUMP :- 2 Set 643,000.00

SITC of Standalone VFD Panel (LT MCC panel, 50kA) for Min. 160kW Motor,

compartmentalized, Floor Mounted / stand mounted as per site condition / requirement,

operating height maximum 1800/1900 mm, Extensible on both ends, suitable for Manual

& Auto operation. Auto operation & moitoring through PLC/SCADA; Manual from

panel when in remote mode complete in all respects as per Tender SLD / Specification /

IS and including following as minimum:

Panel comprising of Min. 400A TPN Microprocessor MCCB LSIG as incomer,VFD

with inbuilt RS 485 for 160 kW Motor or higher as per pump manufacturer reco. with

VFD rating minimum (347A @ 50°C) with suitable derating with detachable type door

mounted display key pad, 400A, AC3 duty Line contactor, Semi conductor fuse, Input

Choke having Max. 2% voltage drop shall be provided, rating as recommended by VFD

manufacturer & Output choke as recommended by VFD OEM for harmonic mitigation,

VFD with 3C3 Confromal coating, MFM Cl. 0.5 with RS-485, Resin Cast CT Cl: 0.5,

SPP, Space Heater, 8 channel temprature scanner with RS485, A/M, L/R switch, R,Y,B,

On, Off, Trip, Speed Up & Speed down Indicating lamps, Start, Stop, Speed Up & down

Push buttons with LCS (PBS) for Suction & Delivery Actuator-valve with 16A FP

MCB, open,close,stop PB, open,close,trip & L/R indication & 2 nos. terminal strip, SP

MCB etc. Heavy duty 8" Metalic Housing and Metal Impeller / Blade / Vanes of

Minimum 2nos. or higher as required at the top of the panel with canopy/hood etc.

Voltage and current harmonics shall be as per recommendations of the IEEE-519

or latest revision.

Note : For Actuator LCS (PBS) shall be provide potential free contact for

(open,close,trip & L/R ) indication and terminal for Open,close and stop command

because actautor shall be operator from PLC Panel also in addition to LCS (PBS).

STAND ALONE PANEL MINIMUM SIZE: 1.2M (W) X 1.5M (H) X 1.0M (D)

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

4.4 50KVAr FIXED CAPACITOR with 7% DETUNED REACTOR ENCLOSURE: 2 Set 142,942.27

(For 1600KVA Transformer No Load loss-2Nos)

Wall / Floor mounting Enclosure panel with 160A TPN TM MCCB, 50 KA with Digital

Ammeter with ASS, Resin Cast CT- Cl : 1.0, 5 VA, with Indicating lamps etc.

(2) OUTGOING CAPACITOR FEEDER:

Capacitor feeder of following rating comprising of TPN MCCB, Capacitor duty

contactor, ON Delay timer etc. as per Tender SLD& Specification

Heavy duty MPP / gas filled capacitor unit

- 20 Kvar capacitor 1 no with 63A TPN MCCB

- 10 Kvar capacitor 2 nos with 32A TPN MCCB

- 5 Kvar capacitor 1 no with 16A TP D curve MCB etc. with ON Indication lamp and

Complete in all respect for each transformer.

- 2 Kvar capacitor 2 nos with 16A TP D curve MCB etc. with ON Indication lamp and

Complete in all respect for each transformer.

- 1 Kvar capacitor 1 no. with 16A TP D curve MCB etc. with ON Indication lamp and

Complete in all respect for each transformer.

4.5 AHF PANEL 2 Nos. 1,103,060.00

'SITC of 400V, 3Ph 4 wire, closed loop compensation, min. 300A Active harmonics

filter (AHF) with 400A MP MCCB with LSIG & fast acting semi conductor fuse

protection, CT of Class 1 or better with 15 VA, Touch screen display, Alarms for fault

conditions, floor mounted, expandable as per site requirement & complete in all respects

as per Specification / IS/IEC to maintain harmonic levels as per latest IEEE

Note:- Above mentioned ratings are min rating for AHF panel and contractor to provide

higher rating AHF panel if required as per actual calculation of the vendor/ OEM.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

4.6 SITC of 640 KVAR at 415V, APFC Panel with 7% detuned reactor, 2 Set 1,840,603.32

compartmentalised, Floor mounted, extensible type on both sides with Horizontal bus

bar arrangement as per site requirement & complete in all respects as per SLD /

Specification / IS and including following as minimum:

(1.1) 1600A, TPN, 50 KA TM ACB with Digital Voltmeter with VSS, Digital Ammeter

with ASS, Resin Cast CT- Cl : 1.0,10VA, Breaker Control Switch (TNC), A/M, L/R

switch, Indicating lamps, Push buttons etc. (1.2) Microprocessor based APFC

Relay,144sq.mm, 16 STEP with RS-485 with minimum operating current 10mA.

2. OUTGOING CAPACITOR FEEDER:

Capacitor feeder of following rating comprising of TPN MCCB/MCB with ON & TRIP

Indication, Capacitor duty contactor,Heavy duty MPP / gas filled capacitor unit, A/M

Switch, ON Delay timer,ON / OFF Push button, ON, TRIP, Auto & Manual Indication

lamp etc. as per Tender SLD& Specification.

(2.1) 100 KVAR FEEDER: 4NOS

(2.2) 75 KVAR FEEDER: 2NOS

(2.3) 50 KVAR FEEDER: 1NO

(2.4) 20 KVAR FEEDER: 1NO

(2.5) 5 KVAR FEEDER: 3NOS, (2.6) 2 KVAR FEEDER: 2NOS

(2.7) 1 KVAR FEEDER:1NO, (2.8) Two nos. Vacant feeder suitable for 1-100KVAr

and 1-75KVAr to be provided.

NOTE: 1. cooling/exhaust fan : Heavy duty 8" Metalic Housing and Metal Impeller

/ Blade / Vanes of Minimum2nos. or higher as required at the top of the panel with

2. For Capacitors of rating ≤ 5 KVAr only, All types viz. APP/MPP/Gas Filled are

4.7 SITC of Lighting Distribution Board (LDB) as under: 3 Nos. 7,568.94

SITC of 3 Phase 4 Wire 4P, double door Prewired LDB each for Indoor Lighting &

Outdoor Lighting Suitable to house :

Incoming: 32A FP, ELMCB (30mA)

Outgoing: 20A SP MCB (9 nos.) & 16A SP MCB (9 nos.)

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

4.8 SITC of Pendant type Speed Up & down LCS pushbutton set complete with 4 Nos. 2,008.47

Enclouser, necessary mounting/ fixing arrangement on wall / pipe support etc. to be

installed near motors for remote operation, etc. as per IS and specifications (including

structural steel)

4.9 SITC of LCS pushbutton station ON & OFF (E-stop) set complete with Enclosure, 6 Nos. 2,008.47

necessary mounting/ fixing arrangement on wall / pipe support etc. to be installed near

motors for remote operation, etc. as per IS and specifications. (including structural steel)

4.10 SITC of Local Control Station with pendant type Open_Stop_Close pushbutton set and 16 Nos. 2,305.08

with Open, Close, Trip & Local / Remote Indicating Lamps complete with Enclosure,

necessary mounting/ fixing arrangement on wall / pipe support etc. to be installed near

motors for remote operation, etc. as per IS and specifications (including structural steel)

(For Actuator of LCS at Platform - 8nos.for pump suction valves & 8nos. for pump

delivery valves)

Note : For Actuator LCS (PBS) shall be provide potential free contact for

(open,close,trip & L/R ) indication and terminal for Open,close and stop command

because actautor shall be operator from PLC Panel also in addition to LCS (PBS).

4.11 SITC of stand / wall mounting type Outdoor type MS Junction Box with canopy of MS 2 Nos. 2,542.37

Steel of minimum 2.5mm thick, with detachable cable gland plate of 3mm thick, duly

powder coated, with earth bus running throught length of the box, steel structure stand

for mounting of JB, etc. for Jointing/Termination suitable for 1.1 kV Submersible

Flexible Copper Power cable with Aluminium armoured power cable from PMCC

Panel. Scope shall include providing suitable rating AL busbars with maximum current

density 0.8 A/mm² , Support insulators, Crimping type lugs,nuts,bolts,washers etc.

complete in all respects as instructed by E.I.C. Drawing shall be got approved before

SITC of the same. Lugs of cables shall not be connected directly also seperation shalll

be provided between power & control cable.

JB of minimum Size: 500mm x 500mm x 400mm or higher as required

(for Subm. Pump power cable)

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

4.12 SITC of stand / wall mounting type Outdoor type MS Junction Box with canopy of MS 2 Nos. 2,542.37

Steel of minimum 2.5mm thick, with detachable cable gland plate of 3mm thick, duly

powder coated, with earth bus running throught length of the box, steel structure stand

for mounting of JB, etc. for Jointing/Termination suitable for 1.1 kV Submersible

Flexible Copper Control cable with Aluminium armoured power cable from PMCC

Panel. Scope shall include providing suitable rating AL busbars with maximum current

density 0.8 A/mm² , Support insulators, Crimping type lugs,nuts,bolts,washers etc.

complete in all respects as instructed by E.I.C. Drawing shall be got approved before

SITC of the same. Lugs of cables shall not be connected directly also seperation shalll

be provided between power & control cable.

JB of minimum Size: 500mm x 500mm x 400mm or higher as required

(for Subm. Pump power cable)

5.1 LOW VOLTAGE (LT) CABLES 350 Mtr. 954.00

Supply, laying , testing and commissioning of 1.1 kV, A2XFY(X)/2XWY(X) XLPE

insulated (IS 7098) AL / Cu stranded conductor, Extruded inner sheath cables as per

specification & IS.

The cable when laid outside the building shall be laid underground in trench with brick

& sand protection/in DWC pipes as per specified method and shall be laid in prepared

trench/ on cable tray when laid inside the building.

SITC of 3.5C x 300 sq. mm. A2XFY(X) Cable (4R for each PMCC panel to APFC

panel -1 & 2, 2R for each PMCC panel to 2 Nos. 250 KW VFD Panel)

5.2 SITC of 3.5C x 150 sq. mm. A2XFY(X) Cable (2R for each PMCC panel to 2 Nos. 160 100 Mtr. 504.00

5.3 SITC of 3.5C x 70 sq. mm. A2XFY(X) Cable (1R for each PMCC panel to each Tr. fix 50 Mtr. 287.00

compansation Panel)

5.4 SITC of 3C x 400 sq. mm. A2XFY(X) Cable (2R for each PMCC panel to 2 Nos. 250 550 Mtr. 1,037.00

KW VNC pump motor, 2R for each PMCC panel to 2 Nos. 250 KW Subm. pump motor

5.5 SITC of 3C x 300 sq. mm. A2XFY(X) Cable (2R for each 250KW VFD panel to 2 Nos. 250 Mtr. 815.00

250 KW pump motor)

5.6 SITC of 3C x 185 sq. mm. A2XFY(X) Cable (2R for each PMCC panel to 2 Nos. 160 400 Mtr. 534.00

KW pump motor J.B.)

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

5.7 SITC of 3C x 150 sq. mm. A2XFY(X) Cable (2R for each 160KW VFD panel to 2 Nos. 250 Mtr. 434.00

160 KW pump motor)

5.8 SITC of 4C x 10 sq. mm. A2XFY(X) Cable (1 no. for EOT Crane at VNC P.H., 1 no. for 450 Mtr. 97.00

EOT Crane at SCF pump, 1 no. for Grabe bucket mechanism, 2 nos. for Drain Pump for

Dry Pit at VNC P.H., 2 nos. for Portable Dewatering Pump panel)

5.9 SITC of 4C x 6 sq. mm. A2XFY (X) Cable (For 2 nos. Indoor LDB, 1 no. Outdoor 350 Mtr. 78.00

LDB, 2nos. For mechnical screen panel, 1no. EOT with ECH for Manual screen)

5.10 SITC of 4C x 2.5 sq. mm. 2XWY(X) Cable (8 nos. MOV at pump Suction, 10 nos. 1700 Mtr. 269.67

MOV at pump Delivery, 1 no. MOV on Header, 2 nos. MOG on screen inlet chamber,

no. MOG on sump interchange compartment,1 no.for ICP & 15 nos.for street light)

5.11 SITC of 2C x 2.5 sq. mm. Multi strand 2XWY(X) Cable (For 2 nos. Tr. Marshalling 500 Mtr. 176.75

Box, 2 nos. APFC CT, 2 nos. AHF CT, 8 nos. Space Heater)

5.12 SITC of 5C x 2.5 sq.mm. 2XWY(X) Cable (For Pump-Motor LCS) 600 Mtr. 220.00

5.13 SITC of 10C x 2.5 sq.mm. 2XWY(X)Cable (2 Run Tr. to HT Panel control cable) 150 Mtr. 510.00

5.14 SITC of 12C x 1.5 sq.mm. 2XWY(X) Cable ( 2nos. For PMU, 8 nos. MOV at pump 1500 Mtr 370.00

Suction, 10 nos. MOV at pump Delivery, 1 no. MOV on Header, 2 nos. MOG on screen

inlet chamber, 1 no. MOG on sump interchange compartment)

5.15 SITC of 10Triad x 1.0 sq.mm. individual triad and overall shielded with aluminum 450 Mtr. 620.00

mylar tape Signal Cable for RTD (winding & Bearing ) of motor.

6.1 CABLE END TERMINATION AND CONNECTION: 24 Nos. 976.00

SITC of Double compression Ni-Plated brass cable glands and crimping type

Bimetallic lugs / sockets with necessary tools and equipment's as specified in

specifications and IS. The glands and lugs / sockets shall be suitable for cable size and

type mentioned below & as per specifications.

1) Earthing the glands and armouring with earthing clamp and jumper and also

connecting to common earth bar.

2) The job also includes, if necessary, supply & fixing of extension busbar of same

material on MCCB or panel board terminal / connector to connect more than one no.

of parallel cables or to connect higher size cable to lower size unit. The job also includes

earthing the glands and armour of the cable with common earth bar or flexible copper

mesh.(Cable termination qty. shall be as per site requirement)

SITC of 3.5C x 300 sq. mm. A2XFY(X) Cable (4R for each PMCC panel to APFC

panel -1 & 2, 2R for each PMCC panel to 2 Nos. 250 KW VFD Panel)

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

6.2 Same as above but, 3.5C x 150 sq. mm. A2XFY(X) Cable (2R for each PMCC panel to 8 Nos. 504.00

2 Nos. 160 KW VFD Panel)

6.3 Same as above but, 3.5C x 70 sq. mm. A2XFY(X) Cable (1R for each PMCC panel to 4 Nos. 298.00

each Tr. fix compansation Panel)

6.4 Same as above but, 3C x 400 sq. mm. A2XFY(X) Cable (2R for each PMCC panel to 2 16 Nos. 1,370.00

Nos. 250 KW VNC pump motor, 2R for each PMCC panel to 2 Nos. 250 KW Subm.

pump motor J.B.)

6.5 Same as above but, 3C x 300 sq. mm. A2XFY(X) Cable (2R for each 250KW VFD 8 Nos. 960.00

panel to 2 Nos. 250 KW pump motor)

6.6 Same as above but, 3C x 185 sq. mm. A2XFY(X) Cable (2R for each PMCC panel to 2 8 Nos. 585.00

Nos. 160 KW pump motor J.B.)

6.7 Same as above but, 3C x 150 sq. mm. A2XFY(X) Cable (2R for each VFD panel to 2 8 Nos. 496.00

Nos. 160 KW pump motor)

6.8 Same as above but, 4C x 10 sq. mm. A2XFY(X) Cable (1 no. for EOT Crane at VNC 14 Nos. 128.00

P.H., 1 no. for EOT Crane at SCF pump, 1 no. for Grabe bucket mechanism, 2 nos. for

Drain Pump for Dry Pit at VNC P.H., 2 nos. for Portable Dewatering Pump panel)

6.9 Same as above but, 4C x 6 sq. mm. A2XFY (X) Cable (For 2 nos. Indoor LDB, 1 no. 12 Nos. 111.00

Outdoor LDB, 2nos. For mechnical screen panel, 1no. EOT with ECH for Manual

6.10 Same as above but, 4C x 2.5 sq. mm. 2XWY(X) Cable (8 nos. MOV at pump Suction, 76 Nos. 65.65

10 nos. MOV at pump Delivery, 1 no. MOV on Header, 2 nos. MOG on screen inlet

chamber, 1 no. MOG on sump interchange compartment, 1 no.for ICP & 15 nos.for

6.11 Same as above but, 2C x 2.5 sq. mm. Multi strand 2XWY(X) Cable (For 2 nos. Tr. 28 Nos. 49.49

Marshalling Box, 2 nos. APFC CT, 2 nos. AHF CT, 8 nos. Space Heater)

6.12 Same as above but, 5C x 2.5 sq.mm. 2XWY(X) Cable (For Pump-Motor LCS) 20 Nos. 180.00

6.13 Same as above but, 10C x 2.5 sq.mm. 2XWY(X)Cable (2 Run Tr. to HT Panel control 8 Nos. 240.00

6.14 Same as above but, 12C x 1.5 sq.mm. 2XWY(X) Cable (2nos. For PMU, 8 nos. MOV at 48 Nos. 250.00

pump Suction, 10 nos. MOV at pump Delivery, 1 no. MOV on Header, 2 nos. MOG on

screen inlet chamber, 1 no. MOG on sump interchange compartment)

6.15 Same as above but, 10Triad x 1.0 sq.mm. individual triad and overall shielded with 16 Nos. 280.00

aluminum mylar tape Signal Cable for RTD (winding & Bearing ) of motor.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

7.1 CABLE TRAY 450 Mtr. 694.88

SITC of G.I. (hot dip galvanised ) Ladder type medium duty (2mm thick) Cable Tray

with necessary bends, tees, reducers, covers and clamps for fixing. All material shall be

Hot dip galvanised. All hardware shall be Electro-galvanized/ SS 304 complete in all

respects as per Specification. And including all accessories.

600 x 100 mm - Ladder type

7.2 300 x 100 mm - Ladder type 550 Mtr. 556.51

7.3 150 x 50 mm - Ladder type 500 Mtr. 278.76

7.4 Supply, laying and erection of 125 mm (ID) approved make Double Walled 100 Mtr. 325.00

Corrugated pipes (DWC) of polyethelene (confirming to IS-14930 II) with necessary

connecting accessoies of same material at required depth for laying of cable below

ground / road surface for enclosing cable and back filling the same to make ground as

per original. (For HT cable).

7.5 Supply, laying and erection of 75 mm ID approved make Double Walled Corrugated 150 Mtr. 144.00

pipes (DWC) of polyethelene (confirming to IS-14930 II) with necessary connecting

accessoies of same material at required depth for laying of cable below ground / road

surface for enclosing cable and back filling the same to make ground as per original. (LT

7.6 Making Trench/ excavation in soft soil of suitable width and of depth (minimum 150 Mtr. 46.46

750mm depth (LT) & 1000mm for HT) for laying cable/ DWC pipe and back filling the

same and making the surface as normal ground as per IS & Ternder Specification/Drg.

(For laying of HT/LT cable)

7.7 Cable Protection/ Covering in Trench: Cable Covering with second class bricks or 50 Mtr. 134.33

cement tiles laid cover the cable (top) & also on both side with sand bedding/cusioning

of 75mm.& covering of 150mm Layer of sand above cable (16 bricks per meter.) as per

IS & Tender Drg/ Specification. (For HT/LT cable protection) complete in all respects

as instructed by EIC.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

8.1 CHEMICAL EARTHING SYSTEM 8 Set 10,593.89

SITC of Maintenance free chemical earthing (copper) with earthpit of minimum bore

size dia. 225mm Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS-

3043:1987 /Tech spec. made of corrosion free Pipes having Outer pipe dia of 48 mm

having 250 Micron copper plating, Inner corrosion free Hot dip galvanised (80 to

micron) pipe dia of 26 mm with copper flat strip type connection terminal 14mm dia

with constant ohmic value surrounded by highly conductive corrosion resistant chemical

compound with high charge dissipation suitable for electrical installation & of 3Mtr.

length of Pipe with two nos. 25Kg. bag of Back filling compound.. (2nos. for HT Panel,

2 nos. Each for neutral of Tr.-1 & 2, 2 nos. for ICP earthing,)

NOTE: Earthing Resistance value & date shall be painted on the chamber cover.

8.2 SITC of Maintenance free chemical earthing with earthpit of minimum bore size dia. 16 Set 7,095.25

225mm Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS-

3043:1987 /Tech spec. made of corrosion free Hot dip Galvanised (min 150 Microns)

Pipes having Outer pipe dia of 76 mm , Inner corrosion free Hot dip galvanised (80 to

100 micron) pipe dia of 26 mm with copper flat strip type connection terminal 14mm

dia with constant ohmic value surrounded by highly conductive corrosion resistant

chemical compound with high charge dissipation suitable for electrical installation &

3Mtr. length of Pipe with two nos. 25Kg. bag of Back filling compound. (2 nos. Each for

Tr.1 & Tr.2 Body, 2nos. for LT Panel, 4nos. for pump motor set & 6nos. for grid

earthing & all elect. Equipments)

NOTE: Earthing Resistance value & date shall be painted on the chamber cover.

8.3(a) SITC of 50mm(w) x 8mm(T) etc. sizes as required, HOT dip galvanized GI Strip 1404 Kg. 77.77

including supply & fixing using GI spacers, saddles when laid inside the building and

inclusive of excavation & refilling of earth when laid outside the building &

interconnection with earth pit & all electro-mechanical equipments.

(50X8 G.I Strip wt.3.12 kg/m, 3.12x450Mt.=1404kg.)

8.3(b) SITC of 25mm(w) x 3mm(T) etc. sizes as required, HOT dip galvanized GI Strip 180 Kg. 77.77

including supply & fixing using GI spacers, saddles when laid inside the building and

inclusive of excavation & refilling of earth when laid outside the building &

interconnection with earth pit & all electro-mechanical equipments. (25X3 G.I Strip,

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

8.3(c) SITC of 40mm(w) x 6mm(T) etc. sizes Copper Strip including supply & fixing of 150 Kg. 794.87

bolts, saddles when laid inside the building and inclusive of excavation & refilling of

earth when laid outside the building & interconnection with earth pit & Tr. nutral. (40X6

Cu. Strip, 1.88 Kg/m, 1.88 x 80mtr.=150.4Kg.)

Copper Bolt,Nuts ,Washers shall be used for Connecting Earth electrode to individual

eqp. Bitumen shall be used at the place of joint/welding.

8.3(d) SITC of 25mm(w) x 3mm(T) etc. sizes Copper Strip including supply & fixing of 38 Kg. 794.87

bolts, saddles when laid inside the building and inclusive of excavation & refilling of

earth when laid outside the building & interconnection with earth pit & PLC Panel

(25X3 Cu. Strip, 0.761 Kg/m, 0.761 x 50 mtr.=38.05Kg.)

Copper Bolt,Nuts ,Washers shall be used for Connecting Earth electrode to individual

eqp. Bitumen shall be used at the place of joint/welding. (For PLC Panel to Earthing)

8.3(e) SITC of HOT Dip Galvanized iron strip wire 8 SWG (For LDB, LCS,Street light pole 57 Kg. 77.77

(8 SWG G.I Strip, 0.103 Kg/m, 0.103 x 550Mt.=56.65)

9.1 INTERNAL WIRING 350 Mtr. 78.78

SITC of Mains & outlet points wiring with 1.1 kV grade FRLS PVC insulated ISI

marked flexible stranded copper conductor wires with medium class min. 25mm. dia.

Rigid PVC pipe and accessories to be erected concealed in / to be run on surface / wall /

ceiling with following sizes as mentioned below. The unit rate wirings shall be with

connector, PVC junction box, wires, holder, ceiling rose, angle holder, switch, sockets,

switch board, brass chromium / cadmium plated machine screws, phase and neutral

wires, green Earth continuity wires etc. as required to complete wiring from LDB panel

to the final outlet termination points. The wiring shall be as per IS:732, IS:4648 and

as per tender specification / IS.

(a) SITC of Mains wiring with 3 wire 1.5 sq.mm.

9.2 As per above but (b), SITC of Mains wiring with 3 wire 2.5 sq.mm as per tender 400 Mtr. 96.96

specification & IS.

9.3 As per above but (c ), SITC of Mains wiring with 4 wire 1.5 sq.mm as per tender 350 Mtr. 86.86

specification & IS.

9.4 As per above but (d), SITC of Mains wiring with 4 wire 2.5 sq.mm as per tender 350 Mtr. 120.19

specification & IS.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

9.5 SITC of Point wiring for Light / fan / Bell / Primary Point with 2nos. 1.5 sq. mm & 136 Nos. 329.26

earth wire of 1.5 sq. mm (green) both are of ISI marked 1.1 kv grade FRLS PVC

insulated multistrand copper wires , pipe to be erected concealed in flushed on wall /

ceiling, complete with 6A Tissino Type ISI marked flush type switch / bell push &

accessories erected on metal / PVC Box covered with 3 mm thick PC (Polycarbonate) /

Acrylic sheet with necessary lamp holder / ceiling Rose / H. D. connector as directed

with medium class Rigid PVC pipe & accessories.

9.6 SITC of 6A independent Plug with 2nos. 1.5 sq.mm Cu. Mains size wiring & earthwire 6 Nos. 290.88

of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires with medium class Rigid PVC pipe and accessories to be

erected on wall / ceiling, complete with ISI marked 3 / 5 Pin socket and tissino type

switch erected with earth continuity connection erected on Metal / PVC box covered

with 3 mm thick PC(Polycarbonet) / Acrylic sheet.

(1no. at HT Room, 2nos. at LT Room, 2nos. at PH, 1no. at pantry)

9.7 SITC of 6/16A independent Plug with 2nos. 4 sq.mm Cu. Mains size wiring & earthwire 6 Nos. 570.65

of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires with medium class Rigid PVC pipe and accessories to be

erected on wall / ceiling, complete with ISI marked 3 / 5 Pin socket and tissino type

switch erected with earth continuity connection erected on Metal / PVC box covered

with 3 mm thick PC(Polycarbonet) / Acrylic sheet.

(1no. at HT Room, 2nos. at LT Room, 2nos. at PH, 1no. at pantry)

9.8 SITC of Single Phase 20A 3 Pin Metal clad Industrial Type Socket with plug top and 3 Nos. 820.00

20A SPMCB, suitable for flush mounting, in 16 SWG MS box of suitable size and

covered with 3 mm thick electrical grade hylam sheet or eqivalent ISI marked Electrical

grade bakelite sheet and earthing with 2.5 sq.mm insulated copper wire run inside the

conduit including interconnections etc. complete as required.

(1no. at HT Room, 2nos. at LT Room)

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

9.9 SITC of One 300/380 mm dia. Ex fan 16A independent Plug point near Ex. Fan with 20 Nos. 570.65

2nos. 4 sq.mm Cu. Mains size wiring & earthwire of 1.5 sq.mm (green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multistrand copper wires with medium class

Rigid PVC pipe and accessories to be erected on wall / ceiling, complete with ISI

marked 3Pin socket and tissino type switch erected with earth continuity connection

erected on Metal / PVC box covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet.

Plug point shall be near Ex.Fan.

9.10 SITC of 300mm sweep 960 R.P.M exhaust fan, capacitor type, having double ball 5 Set 1,883.65

bearing, M.S.blades, mounting frame, forearms, suitable to operate on 230V,50 HZ AC

supply conforming to IS: 2312.Fan shall be painted with epoxy grey colour controlled by

one 6 A flush type switch on board and 6A plug point near Ex. fan.

9.11 SITC of 380mm sweep 1400 R.P.M exhaust fan, capacitor type, having double ball 15 Nos. 3,082.52

bearing, M.S.blades, mounting frame, forearms, suitable to operate on 230V,50 HZ AC

supply conforming to IS: 2312.Fan shall be painted with epoxy grey colour controlled by

one 6 A flush type switch on board and 6A plug point near Ex. fan.

9.12 SITC of Sheets steel powder coated weather proof enclosure with One no. 32A, 415V 3 Nos. 772.65

4P MCB for Motor & Inductive load (C Curve) having 10 KA breaking capacity &

confirms to IS: 8828. (1 no. for EOT Crane at VNC P.H., 1 no. for EOT Crane at SCF

pump, 1 no. for Grabe bucket mechanism)

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

10.1 LED LIGHT FIXTURES & LIGHTING: 60 Nos. 589.84

SITC of Indoor wall mounting 20Watt or up to 25% higher wattage LED 4 feet Tube

Light indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with

diffuser and/or Polycarbonate optics with company mark/name

120 to 300 V,Power Factor more than 0.9, THD < 10 %,

CCT 4000 K to 6500K, Uniformity ratio >0.7,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

(Each fitting required LM-79 & LM-80 Certificates)

Tube Light with integral / non-integral driver, Surge-4KV,IP-20, 4 feet, Cat-III

(3nos. AMC HT room, 3nos. at AEC Room, 3nos. at pantry area, 3nos. at office room,

18nos. for LT Room, 30nos at PH, )

10.2 Item description as per Sr. No. 8.1.1 SITC of 7 watts LED Lamps integral type,cool 10 Nos. 112.11

white with PC diffuser suitable for B22 LAMP holder

(1no. AMC HT room, 1no. At AEC room, 3nos. for LT Room, 3nos. At pantry area

10.3 1200mm sweep ceiling fan, capacitor type, having double ball bearing 450mm down 6 Set 1,596.81

rod, canopies, shackle, rubber bush, blades, electronic speed regulator, suitable to

operate on 230V,50Hz AC supply conforming to IS: 374/1979.Fan shall be painted with

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

10.4 SITC of 40W LED Surface / Wall mounted LED Flood Light fittings with High 25 Nos. 5,194.43

power White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses with company mark/name engraved or embossed

120 to 300 V,Power Factor more than 0.95, THD < 20 %, CCT 5000 K to 5700K,

Uniformity ratio >0.45, Luminaries efficacy> 85 lumens/watt . LED driver efficiency >

( Each fittings required LM-79 & LM-80 certificates)

(IP-65), Surge -4KV Cat-III

For Indoor use: (Pump House)

10.5 SITC of 'B' class galvanised iron pipe 32 mm outside dia 45 cms long duly welded on 60 Nos. 558.53

20 cms x 20 cms x 3 mm thick M.S. base plate, erected on wall or corner for mounting

luminaire with necessary hardware materials duly painted for wall mounting indoor

flood light fixtures on Wall of Buildings & post top lantern.

11.1 EXTERNAL LIGHTING (Flood LIGHT): 35 Nos. 6,088.28

SITC of 70W LED Wall mounted LED Flood Light fittings with High power White

LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than

130 lm/w and corrosion free High pressure die cast aluminum housing with smooth

finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate

optics/ lenses with company mark/name engraved or embossed

120 to 300 V,Power Factor more than 0.95, THD < 20 %, CCT 5000 K to 5700K,

Uniformity ratio >0.45, Luminaries efficacy> 85 lumens/watt . LED driver efficiency >

( Each fittings required LM-79 & LM-80 certificates)

(IP-65), Surge -4KV Cat-III

For Outdoor use:

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

12.1 EXTERNAL LIGHTING (STREET LIGHT): 15 Nos. 10,688.83

SITC of Street Light Pole, steel tubular swaged type, 7.5 meter long with single arm &

M.S.base plate with pipe cap and over hung 1.5 m long having dia to suit the socket of

240V LED street light fixtures. Street light pole unit rate shall be with (i) IP 65 SMC

box of size 20 x 15 x 15 cms. with MCB & terminal strip inside the box with

hinged/sliding door (ii)50mm dia, B class GI pipe bracket min.1.5mtr long for

Incoming & outgoing cable (iii)MS Cable Clamp of 25 x 3mm (iv)SITC of

Mtr.single Arm bracket of medium duty MS pipe of 4.2 cms. Out side dia complete

with suitable sleeve tubing 45 cms. long of required size of pole top etc. and having

spread of 1.5.mtr. length with 110 deg.(v) Complete painted with one coat of Red oxide /

PU base primer and two coats of Aluminium / PU paint for Pole,Arm, pipe etc.

12.2 SITC of 70W LED Street light fittings with High power White LEDs wattage of 1Watt 15 Nos. 5,976.17

and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion

free High pressure die cast aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with

company mark/name engraved or embossed

120 to 300 V,Power Factor more than 0.95, THD < 20 %, CCT 5000 K to 5700K,

Uniformity ratio >0.45, Luminaries efficacy> 85 lumens/watt . LED driver efficiency >

( Each fittings required LM-79 & LM-80 certificates)

Street Light (IP-65), Surge -4KV, 70 watt Cat-III

12.3 SITC of M-20 / 1:2:4 cement concrete foundation for Street light pole & 70 % PCC 15 Nos. 1,292.80

from bottom including excavation for the pole of size 60 x 60 x 120 cms. Deep in below

ground level with plinth of 45 cms x 45 cms(or 45 cms dia x 45 cms) high upper ground

level with necessary curing and finishing in approved manner.

13.1 SAFETY ACCESSORIES 10 Nos. 8,671.86

SITC of following safety accessories complete with necessary fixing brackets, other

accessories and tools etc. as required to complete the job.

Supply & Erecting carbon dioxide (CO2) fire extinguisher of 6.5kg capacity with

necessary clamps made from 50 x 6 mm M.S. Flat with nut & bolts grouted in wall

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

13.2 Supplying of standard first AID box with antiseptic cream, medicine for use on wounds 8 Nos. 299.97

due burn, crepe bandage, guage bandage, medicated ready to use bandage (Band-aid)

adhesive tape for medicinal user, scissors, antiseptic solution (Savlon or similar) etc.

(All above contents shall be of standard makes)

13.3 Supply & fixing of printed instruction (First Aid) Chart both in English and Gujarati and 6 Nos. 130.29

duly framed with front glasses, for treatment of person suffering from electric shock.

13.4 Supplying & fixing of floor mounting stand for keeping four nos. of FIRE buckets 2 Nos. 1,798.81

comprising 1500 mm in length, 900 mm height frame made out of 30mm X30 mm X

mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with

one coat of red lead and two coats of approved enamelled silver paint.

13.5 Supply and fixing of 20 W fluorescent lamp operated emergency light with 2 No. 2,670.00

maintenance free battery for 3 hours operation during mains power failure.

(1 no. for LT Room)

13.6 Supply and laying of Synthetic Insulating Mat of Class - B of min. thickness 2.5mm as 3 Sq.mtr 3,081.51

per IS:15652 and with good electrical insulation property for 11kV/22KV as per site .

requirement. (for HT Panel)

13.7 Supply and laying of Synthetic Insulating Mat of Class - A of min. thickness 2mm as 25 Sq.mtr 1,027.17

per IS:15652 and with good electrical insulation property for 1.1KV/3.3KV as per site .

requirement. (For LT Panel)

13.8 Providing pair of rubber hand gloves ISI make suitable for working on 22 KV supply 1 No. 214.12

14.1 LIASONING CHARGES FOR OBTAINING NOC 1 Ls. 25,000.00

Power Liasoning Charges for obtaining N.O.C from Electrical Inspector / Statutory

authority for Power / Ele. Installation. (Fees shall be paid by tenderer for obtaining

N.O.C. from Electrical Inspector / Statutory authority on behalf of client and shall be

reimbursed on submission of original receipt to Client).

Liasoning Charges shall include preparing required attested documents & drawing for

obtaining NOC on behalf of client (Applicable Fees / deposits shall be reimbursed by

B TOTAL OF ELECTRICAL WORKS WITHOUT GST

SCHEDULE OF QUANTITIES AND RATES FOR SITC OF AUGMENTATION WORK OF CIVIL, ELECTRICAL, MECHANICAL &

INSTRUMENTATION WORKS FOR EXISTING 180 MLD TERMINAL SEWAGE PUMPING STATION (TSPS) AT PIRANA OF AMC.

ITEM DESCRIPTION QTY. UNIT RATE AMOUNT

1.0 INSTRUMENTATION WORK 10 NOS. 5,413

PRESSURE MEASURING SYSTEM

Supply, installation, testing & commissioning of Diaphragm Type Pressure Guage having

150 mm dial with isolation ball valve in SS 316, necessary fittings/accessories in SS 316 (3

way 2 valve manifold, nipples, coupling etc.) complete in all respects and as per specification.

Range : 0 - 4 Kg/cm2 (at each pump delivery side)

1.1 Supply, installation, testing and commissioning of Pressure Transmitter with local display all 10 NOS. 29,147

mounting accessories,three way manifold, hardware, etc.

Range : 0 - 4 Kg/cm2 (at each pump delivery side)

2.0 LEVEL MEASURING SYSTEM 4 NOS. 84,588

Supply, installation, testing and commissioning of Hydrostatic type Level Transmitter for Diff.

level based auto operation of Screen along with 20 meter cable, junction box, all mounting

accessories, hardware, Fixing of 2" size PVC pipe in Screen Chamber for installation the

Hydrostatic sensor, Clamp,etc. complete in all respects and as per specs and having following

measurement ranges.

Meas. Range: upto 10 m at sump (at Upsteram and downstarem of Mechanical Coarse Screen)

2.1 LEVEL MEASURING SYSTEM 2 NOS. 59,436

Supply, installation, testing and commissioning of Remote type Ultrasonic Level Transmitter

along with 10 meter cable between Sensor and Transmitter, all mounting accessories, hardware,

etc. complete in all respects and as per specification and having following measurement ranges

for liquid (Sewage) application:

Meas. Range: upto 10 mtr. (at Both Comp. of Sump)

The scope also includes providing 4" flanged, puddle pipe approximate 300 mm long including

fixing of the same in existing civil structure slabe of pump house for mounting of transmitter.

ITEM DESCRIPTION QTY. UNIT RATE AMOUNT

3.0 ELECTRO MAGNETIC FLOWMETER 1 NO. 10,22,034

Supply, installation, testing and commissioning of Full Bore Electromagnetic flow meter

comprising of IP-68 Sensor, IP-66 remote type transmitter with 30 m cable between sensor and

transmitter along with all mounting accessories, Weather proof enclosure for transmitter,

hardware, mounting stand, etc. as per specification and to complete the work in all respect as

per site condition necessary connection with pipe and shall have following size.

Meter size: 2000 mm NB (at Existing Pump Header )

Pipe Size : 2000 mm NB

The scope also include necessary modification , cutting, welding in existing pipe line and

install the flow meter, providing foundation and support etc. complete as per specification and

to complete the work in all respect as per site condition.

4.0 PLC BASED INSTRUMENT CONTROL PANEL 1 NO. 18,81,980

Supply, Installation, Testing & Commissioning of PLC Based Instrument control Panel with

Local SCADA system comprising of min. 24” PC Console with A4 size laser jet printer for

report / alarm printing, SCADA run time 25 display/ Equvalent Tag software licence, 4G/ Latest

GSM/GPRS modem for remote data transmission to Existing Central SCADA of Client/AMC,

Communication port for MFM, Etherenet Switch, etc. Instrument Control Panel '(PLC

Enclosure / Panel ) with necessary PLC based logic and wiring , Min. 2 kVA UPS (with

min backup ), etc. complete in all respects and as per specs PLC having minimum I/O count of

4.1 Necessary modification /provision in existing Central SCADA System at Central Control Room 1 LOT 57,070

of AMC to monitor and control SPS from Central Control Room.

The Scope shall include acqusition of data of SPS , graphics development, Data mapping,

Alarm management, logic development, Storage and Screen development, etc for monitoring

and control from existing Central SCADA shall be carried out by sucessfull bidder or existing

central SCADA contractor / Vendor and if it is carried outby the existing central SCADA

contractor the required charges as per this item shall be paid by successfull bidder of SPS to

Existing Central SCADA Contractor.

Client/ AMC shall provide necessary support to bidder for access in existing Central SCADA

for necessary modification & development as described above.

ITEM DESCRIPTION QTY. UNIT RATE AMOUNT

5.0 INSTRUMENT CABLE & ACCESSORIES 400 Mtr. 185

Supply, Laying, Installation, Connection, Termination, Testing & Commissioning of Instrument

Cables and accessores as per specs. The unit rate shall include.

(a) Supply, loading & unloading of the cable at site from store.

(b) Shifitng of cable from site store to place of installation.

(c) Fixing of cable clamps, brackets, supports, route markers etc. where ever required to fix the

(d) Excavation, back filling and levelling of ground alongwith laying of fine sand, protection

bricks and other necessary civil material for laying cables outside the building.

(e)Testing and submission of sketches & reports of all the cables laid.

5.1 SIGNAL CABLE 1300 Mtr. 177

5.2 CONTROL CABLE 1800 Mtr. 479

5.3 INSTRUMENT CABLE TRAY 60 Mtr. 787

G.I. Perorated type cable tray shall be made out of galvanized mild steel sheets of 2 mm

thickness with required asccessories . All material shall be Hot dip galvanised as per IS 2629 (

as mentioned in specification and tray hardware shall be in GI.

450 X 25 mm - Perforated type

5.4 100 X 25 mm - Perforated type 100 Mtr. 344

5.5 CABLE END TERMINATION & CONNECTION : 8 NOS. 184

Supply, fixing, connection, testing and commissioning of double compression brass cable

glands and crimping type Bimetalic lugs / sockets with necessary tools and equipments as

specified in specifications and IS complete in all respects. The glands and lugs / sockets shall

be suitable for cable size and type mentioned above. The job also includes earthing the glands

and armour of the cable with common earth bar or flexible copper mesh as applicable.

5.6 SIGNAL CABLE 38 NOS. 184

5.7 CONTROL CABLE 70 NOS. 356

C TOTAL OF INSTRUMENTATION WORK WITHOUT GST

Cost Estimate For

AUGMENTATION OF EXISTING 180 MLD TERMINAL SEWAGE PUMPING STATION (TSPS) AT PIRANA

(CIVIL WORK) OF AMC AREA

(AS PER GWSSB 2022-23 & R & B SOR 2023-24)

Sr. Total Basic Rate

Items (without GST) Unit Amount in Rs.

No. Qty. in Rs.

01 Excavation for foundation with shoring and strutting if required as -

per required gradient and line including safety provisions using

site rails and stacking excavated stuff including up to all required

lead cleaning the site etc. complete for all lifts and strata as

02 Filling with available excavated earth (excluding rock) in 20.00 129.10 130.39 Cum

trenches, plinth, sides of foundation in layers not exceeding 20 cm

in depth consolidating each deposited layer by ramming and

03 Providing and casting in situ C.C. in grade M-15 (approx. corresp. 5.00 4906.00 4906.00 m3

to prop. 1:2:4) (proportions as per mix design or as per Table 9 of

IS456 2000 in masses by weigh batching ) using granite, quartzite

trap metal of size 6 mm to 20 mm for RCC work, including

scaffolding centering, form work, needle vibrated

consolidation, curing comp. (excluding cost of reinforcement and

neat finishing) with centering and shuttering/deshuttering etc.

comp. for structure for other than water retaining. Footing (with

04 Providing and cast in situ C.C. in grade M-30 proportions of -

ingredients as per mix design by weigh batching using granite,

quartzite trap metal of size 12 mm to 20 mm and or 6 mm to 12 or

6 mm to 12 mm mm including scaffolding centering formwork,

needle vibrated consolidation, curing and hydrulic testing etc.

complete (excluding cost of reinforcement) with centering &

shuttering/ deshuttering etc. for all water retaining structures.

a) R.C.C. Raft and footings 10.00 8213.00 8213.00 m3

05 Supplying cutting, bending, binding and placing in position steel 1.00 77504.00 77504.00 MT

as per plan and design and as per ISS 2502 including cost of steel

and binding wire for reservoirs/structures only including lift up to

6 meter height or depth below G.L. for all diameters

Do - deformed (TMT) bars confirming to relevant IS Fe -

500 grade for all diameters.

06 Supplying, cleaning, cutting, bending, welding, fabricating, 5000.00 99.00 99.00 Kg.

erecting, structural steel in position irrespictive of location and

levels as per drawings including handling and transport, etc.

complete including applying two (2) coats of primer red oxide and

two (2) coats of approved quality paints

Sr. Total Basic Rate

Items (without GST) Unit Amount in Rs.

No. Qty. in Rs.

07 Fixing of Rebar on concrete structure for connection with new -

structure using Hilti/Fischer or equivalent technology including all

labour,tools & tackels temporary arrangement, saftey measures

etc. complete .

D Total of Civil works in Rs.

SCHEDULE OF QUANTITIES AND RATES FOR SITC OF ELECTRO-MECHANICAL WORKS WITH 3 YEARS COMPREHENSIVE O&M FOR

EXISTING 180 MLD TERMINAL SEWAGE PUMPING STATION (TSPS) AT PIRANA OF AMC.

(C) OPERATION & MAINTENANCE

The works of this schedule comprises of the supply of all spare parts as required including the supply of all labour (including reliever to ensure presence of specified

type and no. of manpower per shift), materials, consumables (except electrical power), equipments, tools and tackles and comprehensive operations and

maintenance of TSPS at PIRANA of AMC during the 3 Year of O & M from the date of successful commissioning as shown in table below.

TABLE FOR COMPREHENSIVE O & M

Item No. Rate per Amount

Item of Work Duration Unit

1.0 Staff Salary

1.1 During First year 12 Months 1,13,226

The work of this schedule comprises of deployment of all operating crew/labour

(including reliever to ensure presence of specified type and no. of manpower per shift) at

Ex. TSPS of AMC during 3 Years of O & M from the date of successful commissioning

as shown in table below.

Total staff salary for First years for Operation and security, repairing and maintenance for

the complete year period.

a) Pump operator - (ITI-Wireman/Eletrician/min. 2 years experience) (3 nos - One for

each shift of 8 hrs.)

b) Helper cum Security - (min. 10th pass-of age < 45 years) (3 nos. - One for each shift

1.2 Total of Manpower for Second Year (5% of Escalation on previous year) 12 Months 1,18,888

1.3 Total of Manpower for Third Year (5% of Escalation on previous year) 12 Months 1,24,833

2.0 Comprehensive Maintenance

2.1 Comprehensive repairing, supply of spares and maintenance of entire works in existing 12 Month -

TSPS alongwith administration & management charges including running office, cost of

lubricants, consumables, spares, tools & tackles, statutory periodical approvals & testing

of eqipment etc. required in all except supply of electric power and sewage during O&M

period for First Year of O&M period.

(Covered under Defect Liablity Period for First Year)

TABLE FOR COMPREHENSIVE O & M

Item No. Rate per Amount

Item of Work Duration Unit

2.2 Total of Comprehensive Maintenance, repairing, Spares, Consumables etc. for entire 12 Month 81,124

works in existing SPS including Proposed as well as all existing Electro-Mech.

equipment’s, for second year of O&M period.

2.3 Total of Comprehensive Maintenance, repairing, Spares, Consumables etc. for entire 12 Month 85,181

works in existing SPS including Proposed as well as all existing Electro-Mech.

equipment’s for Third year of O&M period (5% of Escalation on previous year)

C TOTAL OF O&M FOR 3 YEARS WITHOUT GST