SPECIAL REPAIRS TO OR MD ACCN AT FWT GROUND, QTR NO 01 TO 04 OF SINGLE OFFRS ACCN NEAR OFFRS MESS, SODIUM VAPOUR LIGHT INTO LED LIGHT AND BER AIR CONDITIONING AT MH AND MES IB AT OUTRAM LINE

Amount

Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n.exc.4 Sqm each

Taking down chowkats or frame with shutters (without taking off shutters from the frame) n exc. 1.5 Sqm each

Taking down shutters of any description exc. 1 Sqm but n.exc.2 Sqm each

Taking down shutters of any description exc. 1 Sqm but n.exc.2 Sqm and refixing in the same opening

S&F Pressed steel frames for doors with double rebates of size 125X60 mm including necessary fixing lugs, hinges, lock strike plate, etc; complete,as specified.

S&F Pressed steel frames for doors with single rebates of size 105X60 mm including necessary fixing lugs, hinges, lock strike plate, etc; complete,as specified.

S&F 35 mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specfied and as directed.

M&L 35mm thick 2nd calss hard wood (factory made) glazed and skeleton shutters, open rebated and prerpared to receive glass, gauge, etc edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing , glass etc. sizes of members of shutters as specified in SSR Part-I Section 8.20 (a) complete all as specified and as directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheets, reinforced with MS square tube, supplying and fixing in opening as per specification and drawiing. The door frame shall be fixed to the wall using 75/100mm long MS screws complete all as specfied and as directed.

Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip & 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitbale PVC sheet beading , and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawings all as specfied and as directed.

S&F stainlees steel butt hinges 100mm medium weight all as specfied.

S&F 300 mm aluminium alloy, anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section.

S&F aluminium alloy handle 150 mm cast type anodised all as specified.

S&F 150 mm aluminium anodised barrel tower bolts of extruded section .

Dismantling of MS work such as window/ventilator, grills or similar works.

S&F for pressed steel window fabricated out of cold reduced low carbon steel sheet of designation CR2. Grade D as per IS 513:2008 including following components/specification complete all as specified and as directed :- (i) Two leaf glazed shutter and two leaf gauged (fly proofing) shutter with top portion 450mm (max) height fixed light. (ii) Opening of windows exceeding 0.90 Sqm but not exceeding 2.00 Sqm. (iii) Pressed steel window frame double rebate. (iv) Grill of 10mm MS Square bars @ 150mm C/C (Vertical spacing) throughout outer frame to outer frame. (v) MS Box, hinge, stay, latch, handle, tower bolt. (vi) Flat iron for hold fast and fillets fixing wire mesh. (vii) All section made of CRLCS sheet 1.25mm thickness for outer frame mullion/transomsand 1.00mm thickness for shutter frame and size/shaped of all section as specified in drawing.

S&F for pressed steel windows fabricated out of cold reduced low carbon steel sheet of designation CR2. Grade D as per IS 513:2008 including following components/spedcification complete all as specified and as directed :- (i) Two leaf glazed shutter and two leaf gauged (fly proofing) shutter. (ii) Opening of windows not exceeding 0.90 Sqm (iii) Pressed steel window frame double rebate. (iv) Grill of 10mm MS Square bars @ 150mm C/C (Vertical spacing) throughout outer frame to outer frame. (v) MS Box, hinge, stay, latch, handle, tower bolt. (vi) Flat iron for hold fast and fillets fixing wire mesh. (vii) All section made of CRLCS sheet 1.25mm thickness for outer frame mullion/transomsand 1.00mm thickness for shutter frame and size/shaped of all section as specified in drawing.

Demolition of brick/stone massonry work built in cement mortar including all quoins, arches, pillars etc complete all as directed.

M&L Fly ash brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4

Material & labour for brick work with fly ash bricks built in CM (1:6) straight or curved exceeding 6mtr mean radius complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm dia and fixed with tinned tacks of galvanized wire staples and wooden beading.

All as per item No 21 above but fixed in repairs

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5sqm in each pane.

S&F 3 mm thick figure glass pin head type and glazing with oil putty in square n.exc 0.5sqm in each pane.

Hacking out broken glass panes (any thickness, quality or description) from metal frames glazing with putty or fixed with beads and supply and fixing of sheet glass ordinary quality and glazing with oil putty or beads in square n exc 0.50 Sqm in each pane thickness of glass 3mm.

M&L for preparation of new wood and wood based surface of any description not otherwise descsribed over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M &L for prepartion of old painted wood and wood based surface of any descrition not otherwise descrifed, over 10cm width or girth including knotting and stopping and applying one coat of synthetic enamel paint (any tint/shade) complete all as specified and directed.

M&L for preparation of new steel or iron surface of any description not otherwise descsribed over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified

M&L preparation of old or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paintall as specified & directed.

S&F tubular curtain rails 25 mm dia stainless steel drapery type complete with fixing brackets,stops,rollers etc

S&F stainless steel brackets fancy type suitable for curtain rails 25 mm dia.

S & F in repairs C.P grating of size 150 x 150 mm.

S&F sinks made of stainless steel 0.8mm thick with plugs, washers, waste cupling and PVC wastes pipe including bedding in Cement Mortar to dwarf wall or including fixing cantilever brackets &connecting unions to pipe overall size 495 mmx 420 mm bowl size 410 mm x 330 mm 160 mm all as specified.

S&F PVC flushing cistern low level, 10 ltr capacity with syphonic action type ball valve. Incl inlet ball valve, PVC bend 32mm complete all as specified.

S&F in repairs cast iron 75 mm dia (outlet) floor/ nahani trap including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 all as specified.

S & F in repairs 15 mm bore CP stop cock/Angle cook cast copper alloy,fency type screwed down high pressure with capston head screwed for iron pipe

Supply and fixing CP Centre hole Bash Basin mixer three in One 15 mm bore pipe complet all as specified.

S & F in repairs CP bib tap fancy type 15 mm bore cast copper alloy with round operating knob screw down screwed for iron pipe complete all as specified.

S & F concealed stop cock fency type with sheet flange cast copper alloy, scrwed down high precure with round operating knob for 15 mm bore pipe bore and fixed complete all as specified and directed.

S&F in repair 15mm bore shower rose with swivel joints brass chromium plated Each of 65mm size including 30cm long arms C.P waste cup, washer etc complete.

Taking down steel tubing and connection including cleaning for refixing the same in new or old position of following size fixed on wall and ceilings or laid in floors complete:-

15mm dia

20mm dia

Taking down or up steel tubing and connections and removal to store bore of pipe 15mm

Taking down or up steel tubing and connections and removal to store bore of pipe 20mm

S & F 15 mm dia galvanised iron tubing (ISI marked) medium grade including all necessary fittings and fixed to wall / ceiling or laid in floor jointed with tuflon tape all as specified

S & F 20 mm dia galvanised iron tubing (ISI marked) medium grade including all necessary fittings and fixed to wall / ceiling or laid in floor jointed with tuflon tape all as specified

Cutting chases for concelled pipe where required and pointing in cement mortor 1:3 etc in brick ball for bore of pipe 15/20 mm complete all as specified.

Demolition of cement concrete (Unreinforced) in ground floor and paving n.exc 15 cm thickness (below or above ground level).

M & L cement concrete 75mm thick 1:3:6 type C1 using 20 mm graded stone aggegate in plinth protection and paving, finished even and smooth without using extra cement including making joints 12 mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with and including bitumen & sand 1:3 by weight complete.

M&L 75 mm thick PCC (1:4:8) type D-2 (using 40mm graded stone agg ) as in sub base complete all as specified.

M&L for machine vibrated coloured chequred cement concrete tiles 30cm x 30cm x 25 mm thick set and jointed in neat cement slurry and pointed with grey cement and pigment over and including 15mm thick screed bed or bedding layer in cement mortor 1:4 complete all as specified

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping,clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.00 kg of cement per Sqm complete.

M & L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tiles exceeding 0.11sqm and n. exc 0.18 sqm in floors etc. Set and jointed in neat cement slurry and pointed out in white or coloured cement to match, laid over and including screed bed 15mm thick in cement mortor (1:6) complete all as specified

Demolition of stone slab of any description or thickness in floor, aprons etc.Laid bedded and pointed in any mortor complete.

M & L for glazed ceramic coloured wall tiles in vertical surface 300x 200/ 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over including 10mm thick rending in CM : 1:4 complete all as specified and directed.

M&L for 16-18mm thick green marble in one piece machine cut as in cooking plate form,steps,window cills and like set and jointed in grey cement slurry and pointed in coloured cement (1:2) using marble dust with admixture of pigment to make with marble shade, laid over and including 15mm thick screed bed in cement mortor 1:4 complete all as specified.

Rounding to edges of stone slabs such as steps cooking platefrom and other similar situations complete all as specified

M&L machine cut kota stone slab flooring 18-20mm thick Size not less than 550 x 550 mm over base laid and jointed in grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M&L machine cut kota stone slab flooring 18-20mm thick Size not less than 550 x 550 mm over base laid and jointed in grey cement slurry mixed with pigment to match the shade of the as in skiritings, dados, steps etc including rubbing and polishing complete and all as specified and directed.

Taking down cement plaster from brick/concrete surface including raking out joints hacking for key scrubbing down with water etc complete all as specified .

M & L for 15mm thick rendering in cement mortor 1:6 on brick work or concrete surface of wall, surface finished even and smooth without using extra cement

M & L for 15mm thick rendering in two layer on brick work or concrete surface of wall. 5mm thick plaster in CM:1:4 mixed with WPC @ 3% by weight of cement surface finished even and smooth without using extra cement over 10mm thick plaster in cement mortor 1:6 complete all as specified and directed. (Note : WPC shall be measured & paid separately)

M & L for rendering 10mm thick on brick or concrete surface of ceiling in cement mortor 1:4surface finished even and smooth without using extra cement complete all as specified.

M&L for preparation of new plastered surface of walls and applying two coats of oil emulsion distemper over 3mm thick wall care putty on wall complete all as specified and as directed

M & L for prepartion of newly plastered surface of ceiling and applying three coat of white wash complete all as specified .

M & L for prepartion of newly plastered surface of wall and applying two coat of cement base paint over a coat of alkaline resistant primer complete all as specified.

M & L for complete removal of exisiting treatment on wall surface and apply two coat of oil Bond distemper over 3mm thick wall care putty and priming coat complete all as specified.

M & L preparation of old decoreted plastered surface of ceiling and applying one coat of white wash to match complete all as specified.

M&L preparation of old walls and applying two coats of snowcem over one coat of primer complete all as specified and directed

S & F in repair PVC connection 15mm bore with PTMT nut of length 450mm complete all as specifed

M&L for cement concrete (1:3:6) type C-1 (using 20mm graded crushed sotne agg ) as in coping bed plate for hold fast, Frame Filling etc including necessary form work etc complete all as specified

S&F in repair white vitreous china suqatting pan ''Orissa'' pattern size 580 x 440mm white with ''P'' or ''S'' trap and integral foot rest including connection to traps and to flusing pipe, anti syphonage pipe etc complete and making good to floor complete all as specified

M & L for preparation of new plastered surfaces of walls and applying three coat of white wash complete all as specified and directed.

S & F MS work as in hold fast etc & similar articles confirming Fe-310-0 with & inclk material & labour tarring & sanding complete all as specified & directed.

S & F 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring etc and all as specified and directed

Providing and fixing factory made 18(+0.7mm) thick PVC sheet one sided pre laminated sheet cabinet shutter. 18 mm(+0.7mm) thk sheet shutter of density 600 kg/m3 bent at 90o and finished all edges at all level for making edges, Lipping/bending or 0.5 mm thk PVC sheet lipping at all four edges using bonding tape etc complete all as per directions of enginer in Charge, Manufacturers's speciifcations

Supply & fix aluminium anodized hasp and staple of size 100mm long, safety type complete all as specified & directed.

Supply & fix magnet ball catcher of suitable size for cupboard shutters all as per sample kept in GE’s office complete all as specified & directed.

Supply & fix vitreous china wash basin white flat back type of size 550x400mm including cutting for and pinning in ends of brackets as in repair and 32mm dia chromium plated waste coupling and down pipe complete all as specified and directed by GE/Engineer-in-charge.

S&F for low density polythelyne pipes (LDPE) of pressure rating 6kgf/cm2 fixed complete to wall or in floors etc. as in outlet pipe for WHB, urinal etc. 32mm bore.

Supply & fix superior quality CP brass tubular towel rail 20mm dia, D type, 60 cm long between flanges fixed as in repair complete all as specified and directed.

Supply & fix stainless steel Plate Rack of best quality, made out of 0.80 mm thick stainless steel sheet, of size 125cmx125cmx25cm with all internal fittings of approved make complete all as specified and directed.

Supply & fix in repairs rotational moulded two layered polyethylene water storage tanks ISI Marked (cylindrical, vertical with closed top) 500 litre capacity hoisted and fixed in position including dismantling and removing existing PVC water storage tank all as specified and directed

Supply & Fix in repair 20 mm bore ball brass valves, high pressure, with polythene float and fly nut complete all as specified and directed.

Supply & fix in repair 20 mm bore Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe complete all as specified & directed.

Supply only liquid water proofing admixture Make-Pidilite

M&L for reinforced cement concrete type B1 1:2:4 (20 mm graded aggregate) nominal mix as in chajjas and platform as directed by Engr-in-Charge

M&L for form work rough finished sufaces of concrete to chullah hoods, chajjas, platforms throughs and similar items including edges as directed by Engr-in-Charge.

Demolition and breaking up drain pipe (salt glazed ware) set in cement mortar 150 mm dia pipe.

Material & labour salt glazed stone ware drain pipes laid in trenches and jointed as specified internal diameter of pipe 150 mm

M & L concrete bed to drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 for 150 mm dia pipe work in foul position.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth for foundation manholes etc and getting out in loose/soft soil.

M & L 1:3:6 type C-2 using 40 mm graded stone aggregate as per foundation filling and mass concrete complete all as specified.

M& L pre-cast cement concrete as in cover slabs (for manholes etc PCC 1:2:4 type B-1 (20 mm graded aggregate) set in cement mortar 1:6.

Demolition and breaking up or down PVC /AC/CI /Cement rain pipe 75/110 mm dia fixed in any position complete all as specified and directed.

S & F CI soil waste and vent pipes of 100 mm dia in any lenth with or without ears with cement joints laid in trenches or in floors of fixed to walls

All as per ser item 97 above but 75 mm bore

S&F in repair 100mm bore CI bends/Tee/Ebow/Branch pieces with door (Any radious) diminishing pieces or tappers (Large bore measured) completed all as specified and directed.

S&F in repair 75mm bore CI bends/Tee/Ebow/Branch pieces (Any radious) diminishing pieces or tappers (Large bore measured) completed all as specified and directed.

Returning , filling in including spreading , levelling , watering and well ramming in layers not exc 25 cm in solft/loose soil.

Removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point soil.

Provion and application by brushing of treatment to reinforcement by application of corrrosion resisting coat in two coats, suitable time to be provided between coats according to manufacturers instructions to resist further deteroriation of reinforcement etc complete according to intruction of eng- in - charge. Make Fosroc/piditlite or equivalent

provsion and application of approved epoxy based bonf coat on concrete surfaces or sound bonding of cold and new concrete surfaces according to instructions of engineer in chargeMake Fosroc/ pidilite or equivalent

Making of profile of structral memebers with polymer modified mortar in damaged areas 1:3 ( Cement:sand) mortar with 5 -10percentage addition of latex polymer,w/c ratio of 0.35 in 20 mm thk layers / including leveling etc complete . Make Fosroc/ Pidilite or equivalemt

Material and labour for complete removal of loose/ cracked concrete including reinforcement if required from RCC roof projection, chajja, fins, facia etc and making good with PCC (1:1.5:3) type A0 using 12.5 mm graded aggregate) in any slab and in any position finsihed the surface even and smooth with out using extra cement including necesary formwork and weldign/binding of reinforcement ( including reinforcement) if required complete and applying 3 coats of white wash / 2 coats of cement base paint to match with existing surfaxes as directed by engineer in charge complet( Note reinforcement will be measured and pai seperately under respective items)

Material and labour MS TMT bars 8-10 mm dia, cut to length bent to shape required including cranking/ Binding/ hooping of coloumns/hooking ends and binding with and including MS wire ( annealed) not less then 0.9 m dia or securing with clips complete

M&L 35mm thick 2nd class hard wood (Factory made) plain framed panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stiles as per IS 1003 (Part-I) kiln seasoned and chemically pressured treated and fitted to chowkats all as specified.

S&F stainlees steel butt hinges 100mm medium weight

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebeats including jointing cleat for fixing etc, xomplete all as specified and directed by Engineer-in-Charge

S&F anodised aluminium window shutters, side hung/sliding type aluminium sections including necessary jointing cleats, sash bars, glazing clips, rubber neophrene packing, handles 01 Nos in each shutter, 02 Nos hinges per shutter, anodised aluminium snap beading, screws etc as per manufactures instructions and trade practee and all as specified and directed by Engineer-in-Charge

S/F rolled MS framed work as in doors, gate and frames of angle with MS squre bars or other section with gusset plate, rail, brases etc and including either hooks, sliding bolts, tower bolts and hinges or steel hanging door fitting to be prepared for hanging and also fastening conforming to Fe 410-0 or 310-0 complete all as specified & directed.

Supply and fix sheet glass 5 mm thick oridinary quality and glazing with rubber packing to sliding windows/ventilators in square not exceeding 0.50 sqm in each pane.

S&F of Power coated Aluminum window Glazed & gauged of Galvanized mild steel wire cloth nominal dia of wire 0.56 mm and average width of aperture 1.18 mm along with aluminum grill 15 micron type DG-117 of make : Hindalco/Indalco/Jindal size of frame 125 mm x 44.5 mm of 18 gauge aluminum section with 15 micron anodizing size of shutter top bottom and side rail 44.5mm x 44.5 mm x 18 guage & 4.8 mm thick plain sheet glass to be fixed in glazed portion and stainless steel hooks & eye to be provided as stay of shutter etc complete including necessary jointing cleats glazing clips rubber packing anodized aluminum snap beading screws anodized aluminum fittings such as peg stay 150 mm long (01 No for each leaf) hinges type B-21 100 mm long (02 Nos for each leaf) suitable handle (01 No for each leaf ) and 100 mm aluminum tower bolt (2 Nos in each leaf ) complete all as specified and directed

S&F in repairs tubular curtain rod 20 mm dia anodised aluminium alloy with fixing brackets,stops,rollers etc

S&F in repairs anodised aluminium alloy brackets for curtain rod 20 mm dia.

S&F in repair vitreous china Wash hand basin, white , flat back size 550x400 mm except taps but incl brackets, Cp waste coupling all as specified.

Supply and fix PVC (SWR) Floor/gully trap of size 125/110mm setting and jointing with solvent cement.

S & F in repair CP wall mixer three in one system for mixing hot and cold wather screwed down for iron pipe 15 mm bore and fixed complete all as specified and directed.

S & F in repair Toilet Paper holder of chromium plated fixed to all with chromium brass screw complete all as directed.

S & F in repair of chromium plated hand shower (Health faucet) 15mm dia 1 mtr long tube acrylic type complete all as directed.

S & F in repair of sheet glass self assembly consisting of 5.5 mm thick sheet glass self 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as directed.

S & F in repair 15 mm bore MS chromium plated shower rose of size 125 mm heavy grade with accessories completed all as specified.

S & F in repair CP Towel ring brass chromuim plated all as specified.

S & F in repairs Chromium plated soap dish heavy duty fixed with brass screw complete all as directed.

S & F in repairs aluminum door seal of suitable section fixed to door shutter with screw complete all as specified.

S &F repairs vitrous china wash down water closet pan (pedestal pettern) white including white plastic water closet seat and back with flat bottum and cover mild steel chromium plated are aluminium anodised hinging device (excluding flaushing cistern and flush pipe) but encluding fixing bolt and necessary connection with existing pipes completed all sepecified and directed.

M&L PCC 100mm thick type D-2 1:4:8 using 40mm graded stone agg in sub base complete all as specified.

M&L 25mm thick cement concrete 1:2:4 type B-0 using 12.5 mm gradded crushed stone aggregate surface finished even and fair for laying floor tiles as leveling course complete all as specified and directed.

M & L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tiles exceeding 0.11sqm and n. exc 0.18 sqm in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15mm thick in cement mortor (1:6) complete all as specified and directed.

Supply only water proofing compound.

M& L complete removal of existing treatment on wall surface and applying two coat of cement base paint over a coat of alkaline resistant primer complete all as specified.

Taking down soil waste and vent pipe (any size or pattern) including all fittings complete all as specified and directed.

PVC (SWR) bends without access door suitable for 75mm Bore pipe fixed complete.

PVC (SWR) pipes, 100 mm bore, single socketed pipe in any length with rubber ring joints laid in floor or trenches fixed complete

PVC (SWR) bends without access door suitable for 100/75 mm mm bore pipe fixed complete.

PVC (SWR) bends with access door suitable for 100/75 mm mm bore pipe fixed complete.

Supply & fix rotational moulded two layered polyethylene water storage tanks ISI Marked (cylindrical, vertical with closed top) 1000 litrs capacity hoisted and fixed in position including dismantling and removing existing PVC water storage tank all as specified and directed

Supply & fix in repair glass corner shelf assembly fancy type made of 6 to 7 mm thick sheet glass of size 250x 250mm fixed with CP brackets complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs cleaning etc and hoisting if required reconnecting and re-fixing in position and cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes for exc 250 & n exc 500 ltr capacity including writing date and year of cleaning of height not less than 50mm and width not less than 20mm on plain base with synthetic enamel paint etc complete all as specified and directed.

M&L for Reinforced concrete pipes 200mm bore, class NP2, laid and jointed complete with collers all as specified and directed

M & L concrete bed to drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 for 200 mm dia pipe work in foul position.

M&L PCC 1:2:4, type B-1 (20 mm graded aggregate) as in coping and benching and the like including weathering slightly rounded or chamfered angle and throating as directed.

Taking down existing UNSV copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc

Dismantling and taking out submain wiring 2/3/4/6 wire of any size, segregating for material for reuse, making good disturbed surface of walls/floors to match with existing surface and taking out from site all as directed by Engineer-in-Charge.

M&L point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLS cable 1100 volts grade drawn through and including non metallic rigid PVC conduit, medium grade minimum 19mm dia ISI marked and conduit accessories concealed in wall fixed on cellling/roof etc for modular switches box and and plates measured separately and for piano type switches with sunken type pressed steel/welded MS terminal boxes made out of 1.2 mm MS sheet, 3mm thick laminated sheath top cover for mounting of fittings, switches, sockets outlets, regulators etc complete including provisining of 1.5 sqmm PVC insulated unsheathed FRLS cable 1100 volt grade with multi stranded copper conductor to common earth and connected to earth dolly for the following :-

One light/fan/bell point controlled by one switch 6 Amp one way

One 3 pin switch socket combination 6 amp on the independent board.

One 3 pin switch socket combination on same board with other switches.

All as described as peritem No 148 above but point wiring with 2.5 sqmm single core multi stranded copper conductor PVC insulated & unsheathed FRLS cable 1100 volt grade and 1.5 sqmm PVC insulated and unsheathed FRLS cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16 amp multi purpose socket combination point on independent board.

One light point controlled by two way switches

S/Fix MCB DB factory made IP 42protection class metal double door with 200 Amp rating bus bar 240/430V for fixing of MCBs/Isolators/RCCBs etc completed of following sizes:-

SPN 08 way

TPN 4 way

S&F MCBs 240/415 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB (DB will be measured and paid separately under respective items of sch A):-

MCB SPN 5 to 40 Amps.

MCB SP 5 to 40 Amps

MCB TPN 4 pole 63 Amps

M&L switch piano flush type single pole, one way 6amp .

S & F switch piano flush type single pole, Two way 6amp

M&L switch socket combination 5 pin 6 amp.

M&L Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal.

S/fix fan regulator electronic type 100Watt 20V-50Hz as directed by Engr-incharge, Make: Ancho cat No 38660 or equivalent

S/fix ceiling rose 65x17mm three terminals .

S& F lamp holder,PVC/Polycarbonate type and back plate suitable for batten fitting along with 09watt LED Lamp of make : Philips/Bajaj/Wipro

M&L flush type bell push 6 amp duly marked for bell complete.

M&L Electronic ding dong bell AC 230V single pole

Concealed Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 6.0 Sqmm size drawn through and including not less than 25 mm dia PVC conduit medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the surface of wall/ceiling including one run of 6.0 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor. NOTE : Two runs of single core 6.0 sqmm and one run of 6.0 sqmm copper FRLS cable as earth continuity conductor and suitable size conduit with accessories shall be measured as one length.

Supply, Fixing, Testing and commissioning of 4' LED not less than 1X18W LED Batten with LED tube not less than 18 watt. Similar to Batten cat Part No.REGALBATTEN8UPTO1X22wSSBSWH and LED tube light cat part No.CRYSTAL1213T8DSTL18WLED865SGLASS of Make- Havells or equivalent in Make: Philips/Wipro/CG

Supply, Fixing, Testing & Commsioning of IP65 integral LED Bulk Head luminaire. Power Consumption should not exceed 10W (Including Driver Loss). Similar to cat Part No. RUGBYNEONFT10WLED760SSYMBOPC of Make- Havells or equivalent in Make: Philips/Wipro/CG

Supply, Fixing, Testing & Commisioning of 2' 10W Mirror LED Batten mounting on two PVC square boxes of size not less than 75mm X 75mm complete including connecting fitting with not less tha 0.5 sqmm 3 core flexible stranded copper conductor wire upto ceiling rose complete all as specified & directed. Make- Havells, Model-ENDURALINEARNEOBS10WLED830SPCWH or equivalent in Wipro/Philips/CG

S & F wall security light LED type 20 W complete with GI bend 1.2 mtr and fixing on wall/pole with clamp, nut & bolt complete all as directed and specified by Engr-In-Charge. Make- Havells, Model-ENDURACITYLITEPLATSL20W LED 757SASYBOPC or equivalent in Phillips/Wipro/CG.

M&L earthing complete with galvanized steel earth plate electrode 600mmX600mmX6mm buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all side and connected to and including galvanized earth lead wire 4.0 mm dia upto 7.5 mtrs long by means of nuts and bolts, check nuts and washers of GI and connected to earhing test point and earth dolly all as shown in electrical plate No 3 of MES schedule Part-I, and testing on completion including necessary excavation and earth work in any type of soil, PCC(1:3:6) type C1 chamber, CI Cover with cast iron frame, funnel with watering pipe 20mm dia medium grade, wire mesh and lugs, GI protection pipe15mm dia, light grade 7.5 mtr long for protection of earth lead upto test point etc all as specified and as directed.

Supply and fixing ceiling fan 1200 mm sweep BEE 5 star rated including fixing of down rod and connection complete with & including provision of flexible three core PVC insulated multi-stranded copper conductor cable of size 0.50 sq mm from ceiling rose/connector to fan complete all as specified and directed. Make : Crompton Greaves or equivalent in Bajaj/Orient/Usha Note: Old UNSV ceiling fans will be deposited to AGE E/M office

M&L for making hole in existing wall of 230mm thickness, suitable for housing of 250/300 mm sweep Exhaust fan complete including grouting of 04 Nos bolt fasteners, PCC work etc including making good disturbed surfaces

Supply, fixing, testing & commissioning of Exhaust fan 225 mm sweep, aluminum rust proof body & blades, with louvers for protection from birds, 230 Volt AC supply, rated power input not more that 45watt, with louvers fixed outside bldg for auto opening and closing connecting up including provison of cable from ceiling rose to fan. Make : CG/Bajaj/Havells or equivalent. Similar to Crompton Greaves model No Trans Air 9"

S & F 25 litre storage water heater, rated power consumption 2000W, current leakage protection device, multi functional safety valve, high precision thermostat control, preset thermal output, high working pressure 0.8MPa ideal for high rise building, vertical mounting, Power consumption not more than 2000watts, Operating voltage 230 volts including all fittings complete & provision of flexible three core PVC insulated multi-stranded copper conductor cable,PVC connecton etc similar to model Number Puro Turbo 25L (Havells), GHWAPTTIV025 or equivalent in Bajaj/Racold/V-Guard Note: Old UNSV Geyser will be deposited to AGE E/M office

Supply, fixing, testing & commissioning of exhaust fan 300 mm sweep 1400 RPM with minimum airflow/air delivery 1710 Cmh, totally enclosed heavy duty motor, die cast aluminium rotor mounted on double ball bearing, IP-55, polarity-4, 230 Volt AC supply (single phase), rated power input not more that 90watt, with louvers and connecting up including provison of PVC insulated overall PVC sheathed copper conductor cable from ceiling rose to fan. Make : CG/Bajaj/Havells or equivalent. Similar to Crompton Greaves model No EXHD300-4-1 Note: Old UNSV ceiling fans will be deposited to AGE E/M office

Supply and fix AC Single Phase Two Wire, Tamper Proof, Static Meter of Class 1.0, 240 V, 50 Hz, basis current 10 A, , Microprocessor and LED/LCD based circuitry. Similar to model No EM 101+ of make L&T or in equivalent model of make Capital/Cyantech. (Note: Old UNSV Electric meter will be deposited to AGE E/M office)

Rigid non-metallic PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc for LAN and TV Socket

PVC Junction boxes (1 to 4 way)

S & F TV socket similar to Schneider cat Part No P4500_DG

Excavation in trenches not exc. 1.5 m wide and not exceeding 1.5m depth for foundation of poles/laying of cables/stay/strut etc not exceeding 10 Sq m on plan and getting out in soft/loose soil.

Removing excavated material (soil) n.exc 50m and depositing where directed at a level not exceeding 1.5 mtr above the starting point

Returning filling including spreading leveling watering and well ramming in layers n.exc 25 cm in soil completed all as specified and directed

M&L for sand cushoning, to cable with river sand and punning to provide required cover for UG cables all as directed at site.

M&L brick protection cover to electric cable with class 'B' bricks laid dry and flat abutting each other with gap between adjascent not exceeding 10mm.

Supply and laying or fixing or passing through pipe,XLPE insulated armoured heavy duty electric cable with aluminium conducto1100 volts grade cross sectional area 16 sq. mm 4 Core .

M&L for galvanized steel tubing light Grade of 40 mm dia protection of cable fixed to pole/walls or laid in floors, road crossing ducts with all necessary fittings and fittings and fixed with clamps, bolts, nuts and washers etc complete all as specified and directed.

Taking down carefully and refixing of MCB DBs any make or capacity with MCBs /Isolators/RCCBs etc complete at old/new place after rewiring all as directed at site.

Taking down carefully MCBs from existing MCBs DB and refixing the same of any make or capacity etc complete at old/new place after rewiring all as directed at site.

Taking down carefully and refixing of energy meter any make or capacity etc complete at old/new place after rewiring all as directed at site.

M&L for concealed point wiring (modular fittings) complete with 1.5 Sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLS cable 1100 volts grade, conforming IS 694, ISI marked with accessories concealed in wall/roof/ceiling etc and including sunken pressed steel terminal boxes for modular in wall but including modular white cover with frame including single core solid conductor copper 1.5 sqmm size solid PVC insulated unsheathed FRLS cable as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified.

One light point controlled by two 2 - way switches, with cables 1.5 sq. mm size ®

All as per item No 185 above but point wiring with 4.0 sqmm single core multi stranded copper conductor PVC insulated & unsheathed FRLS cable 1100 volt grade and 4.0 sqmm PVC insulated and unsheathed FRLS cable 1100 volt grade with multi stranded copper conductor for earth wire for sheet metal enclosure with socket plug top and MCBs single pole and neutral enclosure

S & F MCBs DB Vertical type TPN 4 way double door, for mounting MCCBsas Incoming & DP/ SP/TP/ MCBs as outgoing, factory made, confirming to IS, fabricated out of CRCA sheet . The DP/SP/TP MCB shall be of same make as DB. The DBs shall be of IP 43 - IK 09 with metal door complete all as specified and directed by Engr-incharge.Cat part No.507745 of Make: Legrand or equivalent in Schneider/L&T/C&S

S&F Supply and Fix only MCCB TPN,63 Amps 4-Pole, 415 volts, breaking capacity 16 KA complete all as specified to be fixed on DB Make: Legrand/ Schneider/ L&T/C&S (DB will be measured and paid separately under respective items of sch A)

S& F MCBs DB SPN 12 way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240/430V ,complete all as directed by Engr - in - charge.Make: Legrand/Schneider/L&T/C&S

S&F modular white cover plate with frame, 1/2 module.Make : Legrand/Anchor/Havells

S&F modular white cover plate with frame, 3/4/6 module.Make : Legrand/Anchor/Havells

S&F modular white cover plate with frame, 8/12 module.Make : Legrand/Anchor/Havells

S&F Metal Flush box 1/2 module

S&F Metal Flush box 3/4/6 module

S&F Metal Flush box 8/12 module

M&L modular switch 1 way 6 A, 1 module.Make : Legrand/Anchor/Havells

M&L modular switch 1 way 16 A, 1 module.Make : Legrand/Anchor/Havells

M&L modular socket, 6A-2/3 pin combined, 2 module.Make : Legrand/Anchor/Havells

M&L modular socket combination 16 Amps, 6 pin, 3 module.Make : Legrand/Anchor/Havells

S & F modular fan step regulator 120 W - 2 module

M&L modular bell push 6 A 1 module.Make : Legrand/Anchor/Havells

M&L bell multi music type .Make : Legrand/Anchor/Havells

Refixing of old serviceabe tube light fitting 36/40 watt 4" of any make retrieved from site for stair case mounting on two PVC square boxes of size not less than 75mm X 75mm complete including connection of fitting with not less tha 0.5 sqmm 3 core flexible stranded copper conductor wire upto ceiling rose complete all as specified & direct

Sub main wiring with four single core PVC insulated and unsheathed Fireretardant multi stranded copper conductor cable 1100 volt grade IS-694,marked of 6.00 sqmm size drawn through including concealed conduit 20 mm dia ISI marked including one run of 6.00sqmm PVC insulated and unsheathed Fire retardant multi stranded copper conductor cable for earth wire continuity conductor. NOTE : Four runs of single core cable 6 sqmm respectively and two run of 6.00 sqmm copper cable as earth continuity conductor and suitable size casing caping with accessories shall be measured as one length.

S & F sheet metal enclosure with socket plug top and MCBs single pole and neutral enclosure with a two pin and earth plug and socket complete with one SP MCB 20 Amp. Make Legrand/ Schneider/ABB

S& F lamp holder, PVC/Polycarbonate type and back plate suitable for batten fitting with & including LED bulb of 14W, 230Volts of make Philips/Wipro/Crompton alongwith suitable adopter to fixed in lamp holder for tubelight fittings complete all as specified

Supply, Fixing, Testing & Commisioning of of 2' 10W Mirror LED Batten with system lumen output of 1000 lumens. System Efficacy should be > 85lm/ W. The Luminaire Should have Cool Daylight Color temp of 6500K & CRI>80.Life 40K burning hrs with 70% lumen maintenace. PF>0.95 Housing of luminaire should made of die cast alumunium & mounting on two PVC square boxes of size not less than 75mm X 75mm complete including connecting fitting with not less tha 0.5 sqmm 3 core flexible stranded copper conductor wire upto ceiling rose complete all as specified & directed. Make- Philips, Model-BN021 LED10 S 6500 PSU GR S1

Supply and fixing ceiling fan 1200 mm sweep BEE 5 star rated including fixing of down rod and connection complete with & including provision of flexible three core PVC insulated multi-stranded copper conductor cable of size 0.50 sq mm from ceiling rose/connector to fan complete all as specified and directed. Make : Crompton Greaves or equivalent in Bajaj/Orient/Usha Note: Old UNSV ceiling fans will be deposited to AGE E/M office

S&F of Exhaust fan 200 mm sweep, PVC rust proof body & blades, with louvers for protection from birds, 230 Volt AC supply, connecting up including provison of cable from ceiling rose to fan. Similar to Model - Brisk air HS 8" of Make : Crompton Greaves or equivalent in BAJAJ/HAVELLS/USHA Note: Old UNSV Exhaust fan will be deposited to AGE E/M office

Supply, fixing, testing & commissioning of Metal body exhaust fan 225 mm sweep, 230 Volt AC supply (single phase), with louvers and connecting up including provison of PVC insulated overall PVC sheathed copper conductor cable from ceiling rose to fan. Similar Model No.Trans air 9" of Make : Crompton or equivalent in Bajaj/Havells/Usha. Note: Old UNSV Exhaust fan will be deposited to AGE E/M office

M&L for KAPITRODE Earthing complete with Cast Iron pipe electrode, 75mm bore, 3.15mm wall thickness , 2.9 metres length,with GI pipe & funnel, buried directly and preferably vertically in ground with top edge not less than 2.9 metres below ground level connected with earthing lead of 25x5mm dia galvanised iron strip all as specified including testing on completion including the material and labour of the following, Make -Kapilansh Dhatu Udyog (P) Ltd : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1 of size 450x450x450mm with Cast iron cover with suitable handle . (c) 40 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (d) Requisite quantity of BFC Compound (bentonide powder) and black cotton soil. (e) Testing of earthing. NOTE :- On testing after completion of earthing, if the desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk and cost to the entire satisfaction of the Engineer-in-charge.

Supply and laying or fixing or passing through pipe,XLPE insulated armoured heavy duty electric cable with aluminium conducto1100 volts grade cross sectional area 50 sq. mm 3.5 Core .

Supply, fixing, testing and commissioning of 70 Watt LED street light in repairs withNew generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP OPENING seperate driver compartment with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device.. following specification as per ENDURAPEARLPLUSSL70WLED757SASYTOPCMake Havells or its equivalent in Phillips/ Wipro/Jaquar/Halonix.

Supply and fix single/three phase PVC Jnction Box of Size 20 cm x20 cm x15 cm with hinged door inculding locked arrangment with MCB SP 6 Amps 1 No including necessary clamping. Nuts, bolt etc complete

Supply and Fix 2.5 sqmm alongwith earth wire with insulated copper conductor, single core cable in run through pole for street light as required with 2 X 2.5 sqmm + 1 X 2.5 sqmm earth wire complete all as specified and directed by Rngineer In Charge .

Supply and fix Air cooled split type unit indoor/outdoor air conditionder with copper condenser coil complete with cordless remote control unit and electric driven, single phase of capacity of 1.5 Ton, BEE 3 Star rated make VOLTAS, LG, BLUE STAR

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilised at 230 V with accuracy of + 2.5% and of capacity 4.0 KVA suitable for 1.5 Ton AC make V Gaurd, Vintec, Microtak

RAJENDRASINH B THAKOR