Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.4 LAccepted-AOC | L1 | Accepted-AOC L1 Contractor | |
| 2 | L2₹26.5 L+₹1.1 L (4.14%)Rejected-AOC | L2 | Rejected-AOC Not L1 Contractor | |
| 3 | L3₹26.7 L+₹1.3 L (5.05%)Rejected-AOC EDOLIKUNNATH H CHENNAMANGALUR PO MUKKAM VIA CALICUT 673602 | KOZHIKODE | KERALA | 673602 | L3 | Rejected-AOC Not L1 Contractor | |
| 4 | L4₹29.6 L+₹4.1 L (16.2%)Rejected-AOC | L4 | Rejected-AOC Not L1 Contractor | |
| 5 | L5₹35.0 L+₹9.5 L (37.5%)Rejected-AOC | L5 | Rejected-AOC Not L1 Contractor |
Tender Value
₹27.0 L
EMD Value
₹54,100
Closing Date
22 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Director
NIT, Calicut, Kerala - 673601
Urgent renovation of providing pathway and roofing for staircase to study room of central library
2023_NITC_739703_1
Engg/D1/233/2022-23
Open Tender
Civil Works
Item Rate
45 days
Calicut
Please refer Tender documents.
8 documents required · 8 mandatory
₹590
Director
₹54,100
Yes
25 Jul 2023
9 Feb 2023
24 Feb 2023
9 Feb 2023
22 Feb 2023
9 Feb 2023
Amount
Felling trees of the girth (measured at a height of 1 m above ground level), Beyond 60 cm girth upto and including 120 cm girth including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.
Filling quarry muck in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller, or wooden or steel rammers, and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m :
Earth work in excavation in all kinds of soil by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc.in layers not exceeding 20cm in depth, consolidating each deposited layers by ramming and watering lead upto 1Km and lift upto 1.5m etc. complete.including conveying the earth upto 1KM
Surface dressing of the ground all kinds of soil including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.
Providing and laying in position cement concrete of 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) grade excluding the cost of centering and shuttering - All work up to plinth level
Providing and laying in position cement concrete of grade 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering - All work up to plinth level
Providing and laying in position reinforced cement concrete of 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) grade, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level
Centering and shuttering including strutting, propping etc. and removal of form for lintels, beams, plinth beams,slabs girders, bressumers and cantilevers
Steel reinforcement for R.C.C. work with Thermo-Mechanically Treated bars of grade Fe-500D or more. including straightening, cutting, bending, placing in position and binding all complete above plinth level
Laterite masonary in cement mortar 1:6 (1 cement : 6 coarse sand) in foundation and plinth using neatly dressed laterite stones including cost and conveyance of all materials and labour charges etc, complete
Random rubble masonry with hard stone in cement mortar 1:6 (1 cement : 6 coarse sand) in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with
Steel work in built up GI tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
Providing GI powder coated trafford sheets 0.50mm or nearest available thick with GI bolts and nuts plate washers and bitumin washers, M seal and 150mm overlap at ends including cost and conveyance of all materials and labour charges etc.complete
Providing hip or valleys in powder coated GI sheet 0.6mm or nearest fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete
Providing 200mm or nearest available size PVC gutter square type with necessary clamps, bolts, nuts and specials such as nozzles sockets stoppers etc. including cost and conveyance of all materials and labour charges etc. complete as per the instructions of the dept. officers
Plastering with C.M. 1:4 (one cement four sand), 12mm thick for walls inside and outside with necessary scaffolding and thread lines, including cost and conveyance of all materials and labour charges etc. complete.
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :
Finishing walls with two or more coat Acrylic Smooth exterior paint of required shade in New work (applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
Finishing with Epoxy paint two or more coats on steel work at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete.
Providing and laying paver block of M-30 grade with approved color design and pattern factory made chamfered edge Cement Concrete paver blocks of size 80 mm thick in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in- Charge.
Providing and fixing 90 mm nominal outer dia PVC pipes (3") (4kg/cm2) , including all PVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment.
Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer- in-Charge.
Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc. ,all complete for the required performances as specified, as per the Architectural drawings, as per the approved shop drawings, as specified, and as directed by the Engineer- in- Charge. For payment, only the actual area of glass on face # 1 of the glass panels (but excluding the area of grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. (Payment for fixing of Spandrel Glass Panels in the curtain glazing is included in cost of relevent Item*).“(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %
MUHAMMED HANEEFA PY
E K IBRAHIMKUTTY
SHOUKATHALI U
Rahmathulla.K.K
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .