SPECIAL REPAIR TO BATHROOM OF BLDG NOS P 114 P 115 AND P 118 AND PROVN OF BATHROOM AND TOILET AT MIL STN GANDHINAGAR

Amount

Surface Excavation not exceeding 30 Cm deep and averaging 15 Cm deep and getting out in Soft/ Loose soil complete all as specified and directed.

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth for foundation of pole,laying of cables etc in soft/loose soil and getting out complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and exc 1.5 m but n. exc 3.0m in depth for pole foundation in hard & dense soil and getting out completed all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in Soft/ disintergrated rock complete all as specified and directed.

M&L for providing dry river sand as in sand cushioning to UG cable including punning gently all as directed. Note : Depth after punning shall be measured and paid.

Removing excvaated soil nexc 50m and depositing where directed at a level n exc 1.5 m above the stating point soil etc completed all as specified and as directed.

Spreading and levelling under floor layers not exceeding 25 cm thick and well ramming including watering as required complete all as specified and directed.

Removing excavated material rocks exc 250m but n exc 500m and depositing where directed at a level n exc 1.5 m above the starting point in soil complete all as specified and directed.

M&L for hard core of gauge exc 63mm but n exc 100mm deposited, spread and levelled in layers n exc 15cm thick watered and rolled/rammed to a true surface completed all as specified and directed.

M&L, treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square meter of vertical surface (area of the sub structure in contract with back fill to be measured) complete all as specifeid and directed.

M&L for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed.

M&L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.

M&L for treating the soil under plinth protection @ 5 ltrs of emulsion per sqm surface area complete all as specified and directed.

M&L for treating the soil alongwith external perimeter of bldg @ 2.25 ltrs of emulsion per mtr of perimeter wall complete all a specified and directed.

M&L PCC 1:4:8 type D-2 (40mm graded aggregate) in foundation, sub base, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40 mm graded granite stone aggregate) in surface channel and drains, etc. complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate for padestal/coping around poles, including necessary form work, finishing even and smooth without using extra cement, all as specified and directed.

M&L for providing precast cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in manhole covers including placing the cover in position and set in cement mortar 1:6 complete all as specified and directed. Note : Reinforcement shall be measured and paid seperately.

M&L for 25mm thick, precast cement concrete (1:2:4) Type B-0 using 12.5mm graded stone aggregate as in louvers and jallies, (measured solid) including all mouldings but excluding frame, set in cement mortar (1:4) complete all as specified and directed.

M&L design mix RCC M-25 grade concrete in foundation including raft,footing foundations beem ,plinth beams base for coloumn etc complete all as specified and directed.

M&L design mix RCC M-25 (using 20 mm graded granite stone aggregate) for slabs suspended on walls, beams and columns, in floors, roofs, landings and in shelves and the like complete all as specified and directed.

M&L design mix RCC M-25 in lintel beams/lintels, roof beams over 1.50 mtr spancomplete all as specified and directed.

Supply only Integral waterproofing compound complete all as specified and directed.

M&L for Brick work with old size, sub class 'B' bricks, straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for Brick work with sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specifeid and directed.

M&L Brickwork, with old size subclass ‘B’ bricks in one brick thick honey comb work, built in CM (1:4) complete all as specified and directed

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed.

Cutting chases, for water tubing or concealed , etc, and making good to facings where required and plastering in cement mortar (1:4) cutting not exceeding 10cm girth in brick walls complete all as specified and directed.

Supply and laying sub class burnt bricks as cable protection cover length of bricks230x115x75mm laid perpendicular to cable all as directed.

M&L for Granite 20mm thick (of any type) work (table rubbed and polished) in steps, platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and directed.

Form work to sides of concrete foundations footing bases of coloumn raft and raft beams sides and soffits of plinth beams and similar works vertical or to batter complete all as specified and directed.

Rough finished flat form work to soffits of suspended slabs such as roof slabs, floor slabs and similar work not exce 200 mm thick.

M&L for formwork to chullah hoods, cha jjas, troughs and similar items in cluding edges complete all as specified and directed.

M&L for Form work for to side and soffits of floor or roof beams, beam haunchings, girders bressummers lintels, cantilevers, shelved including sup-ports, overhangs etc also splays between floors and beams etc. complete all as specified and directed.

Rough finished flat Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide

M & L For 35 mm thick factory made 2nd class HW rail and style Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified and directed.

Taking down old shutters of any description exc. 1 sqm but not exc. 2 sqm each complete all as specified and directed.

Taking down steel window/ventilator including grills of any description, n. exc 1.5 Sqm each including making good disturbed surface of Jamb, soffit etc complete all as specified and directed.

S&F, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site complete all as specified and directed.

S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specifications complete all as specified and directed.

S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed

S&F, aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300 mm and fixed complete all as specified and directed.

S&F, aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 250 mm and fixed complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

S&F in repairs, brass chromium plated, tubular towel rail 20mm dia, D type, 60 cm long between flange, complete all as specified and directed.

S&F, stainless steel tubular towel rail 20mm dia, D type, 600mm long complete all as specified and directed.

S&F floor door stopper of 150mm aluminium alloy body and tongue, anodised, with hard drawn steel spring Fixed in floor complete all as specified and directed.

S&F, Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

S&F, stainless steel butt hinges, medium weight, of size 100 mm complete all as specified and directed.

S&F, Mild Steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking , bending, hooking etc and binding with MS wire 0.9mm dia(annealed).

S&F, Mild Steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking , bending, hooking etc and binding with MS wire 0.9mm dia(annealed).

S&F, mild steel TMT bar 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L for rolled mild steel angle iron work as in door frames,,cooler stand etc drilled for fixing of hinges/necessary welding work as for site requirment etc. also fastening and fixing conforming to Fe-290 (Gde-E-165) complete all as specified and directed.

M&L for anodised aluminium windows/ventilators with one or more rebates including joining cleat for fixing etc. complete with frames, shutters and grills of size directed by Engineer-in-Charge including handles, tower bolts, grills, etc complete all as sepcified and directed. Note : Sheet glass, wire cloth, lock, etc shall be measured and paid separately.

M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, platforms and like laid over 10mm thick bedding in cement mortar (1:4) as set with neat cement slurry including pointing in white cement (1:2) using marble dust with admixture and pigment to match with the shade of granite complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as steps, cooking platform, and other similar situations complete all as specified and directed.

M&L for 100mm thick PCC 1:3:6 type B-2 (40mm graded stone aggregate) as in sub base of flooring complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C1, using 40mm graded stone aggregate as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement, Joints of plinth protection shall be filled with bitumen mastic (1:3) complete all as specified and as directed.

M&L for 100 mm thick PCC 1:4:8 type D-2( 40 mm graded stone aggregate ) as in sub base of flooring complete all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in flooring finished fair and even to receive floor finishes complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4 type B-2 (20mm graded stone aggregate) as in sub base of flooring complete all as specified and directed.

S&F, glazed ceramic tiles coloured in vertical surface 450 x 350 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cmenet to match complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 300mm x 450mm x 7mm on vertical surface such as skirting/dados set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including rendering 10mm thick in cement mortar (1:3) , complete all as specified and directed.

M&L coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete as specified and directed.

M&L, Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.11 sqm but not exceeding 0.18sqm, in floors etc. set & jointed in net cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete as specified and directed.

M&L for 60 mm thick machine pressed precast concrete inter-locking paver block with grey cement and pigment any shape and size conforming to IS-15658-2006 M-35 grade complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.

M&L for rendering cement plaster 10mm thick in cement mortar (1:4) on brick work or concrete surfaces of walls, finished even and smooth without using extra cement with water proofing compound @3% by wt of cement or as per manufacturers instructions (WPC shall be paid seperately) complete all as specified and directed.

M&L for rendering cement plaster 10mm thick in cement mortar (1:6) on brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering cement plaster 5mm thick in cement mortar 1:3 on fair faces of concrete in ceilings, chajjas, fins facia etc. complete all as specified and directed.

M&L for rendering cement plaster 15mm thick in cement mortar (1:4) on brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering cement plaster 12mm thick in cement mortar (1:4) on brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick for screed bed or bedding layer of cement mortar (1:4) for laying green concrete even and smooth with out using extra cement complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for treatment of sunken portion consisting under mentioned items(i) 15 mm thick plastering in C:M 1:3 with WPC at all around and base of sunken floor with proper slope. (ii) Applying a coat of bitminous primer @ 0.5 Kg/sqm and then pasting of polythene film, 150 micron, with cold back adhesive. (iii) Fixing 25mm dia GI pipe (medium rade) spout of length 45 cm (iv) The process of (v) to (vi) shall only be done after

M&L for preparation of new surfaces of plastered or unplastered of wall and application of three coat of white washing complete all as specified and directed.

M&L for preparation of new plastered or un-plastered surfaces on walls and applying two coats of white wash complete all as specified and directed.

M&L for preparing old plastered or un-plastered walls surfaces and applying one coats of white wash on walls complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of white cement as primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of white cement primer complete all as specified and directed.

M&L for preparation of old plastered surface of wall and applying one coat of cement base paint complete all as specified and directed.

M&L for preparing new plastered or un-plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

M&L for preparing old plastered or un-plastered surfaces and applying one coat of white wash on ceilings complete all as specified and directed.

S&F, 3 mm thick plain sheet glass, ordinary quality and glazing not exceeding 0.5 Sqm in each pane fixed to steel window with glass putty complet all as specified and directed.

S&F 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq.m in each pane

M&L for preparation of new wooden surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for preparation of old steel surface of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections for 25mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections for 40mm bore of pipe complete all as specified and directed.

S&F, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 20mm bore of pipe complete all as specified and directed.

S&F, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 25mm bore of pipe complete all as specified and directed.

S&F, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 40mm bore of pipe complete all as specified and directed.

Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 20mm bore of pipe complete all as specified and directed.

Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 25mm bore of pipe complete all as specified and directed.

Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 40mm bore of pipe complete all as specified and directed.

M&L for cutting existing 25 or 32mm bore steel tubing for alterations or additional including screwing existing steel (or lengthening screw on pipe to form connector) complete all as specified and directed

S&F 40mm bore high density polythene pipes (HDPE) of pressure rating 6 Kg / cm2 fixed complete to walls, ceiling or in floors etc. complete all as specified and directed.

Supply and laying of 20 mm outer dia CPVC pipe SDR 11 fitting on walls /ceiling or laying in floors including connection to old GI pipe if required complete all as specified and directed.

Supply and laying of 25 mm outer dia CPVC pipe SDR 11 fitting on walls /ceiling or laying in floors including connection to old GI pipe if required complete all as specified and directed.

S&F of 20 mm outer dia CPVC elbow (3/4x 1/2) with brass thread at one end for fixing of taps etc and other end plain complete all as specified

S&F of 20mm outer dia CPVC Tee with brass thread at one end for fixing of taps etc and other end plain complete all as specified

S&F of 20 mm outer dia CPVC adopter with female brass thread at one end for fixing of taps etc and other end plain complete all as specified

Supply, hoisting, fixing in position and connecting 500 litres capacity rotational moulded polyethylene water storage tank double layered (cylindrical, vertical with closed top), ISI marked,including dismantling of old PVC/AC tanks of 500 litre capacity and fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I complete all as specified and directed.

S&F, 15mm Bib taps, cast copper alloy with crutch or butterfly, handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F, in repair, Bib taps long body cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15 mm bore complete.

S&F, pillar taps fancy type cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed 15 mm bore dia complete all as specified and directed.

S&F 15mm bore angle cock cast copper alloy angle cock fancy type chromium plated screwed dowmn high pressure with capstain head head complete all as specified and directed.

S&F Stop valves, 15mm bore, but fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedcomplete all as specified and directed.

S&F, Gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe for 20 mm bore of pipe complete all as specified and directed.

S&F, Gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe for 25 mm bore of pipe complete all as specified and directed.

Supply only, 32mm, waste fittings, brass chromium plated for glazed ware sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms)

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F, 100 bore cast iron soil, waste and vent pipes (sand cast) in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed.

S&F, 75 bore cast iron soil, waste and vent pipes (sand cast) in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed.

S&F, 75mm cast iron vent cowl complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F, 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack 'Z' clamp complete all as specified and directed.

S&F, 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including 'Z' clamp complete all as specified and directed.

S&F, 75mm bore PVC (SWR) bend, any radius complete all as specified and directed.

S&F, 110mm bore PVC (SWR) bend, any radiuscomplete all as specified and directed.

S&F, 75mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed.

S&F, 110mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed.

S&F 75mm bore PVC (SWR) Tee equal or unequal any radius with access door complete all as specified and directed.

S&F 110mm bore PVC (SWR) Tee equal or unequal any radius with access door complete all as specified and directed.

S&F, 110mm PVC (SWR) vent cowl complete all as specified and directed.

S&F, 75mm PVC (SWR) vent cowl complete all as specified and directed.

S&F PVC (SWR) nahani trap, with chromium plated grating including jointing with solvent cement, dia of outlet 75mm complete all as specified and directed.

M & L for PVC (SWR) multi floor trap diameter of outlet 75 mm with grating including jointing with solvent cement.

M & L for PCC 1:3:6 type C2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150 mm bore.

M&L for 150mm dia salt glazed stone ware drian pipes laid in trenches and jointed as specified and directed.

S&F, in repairs, vitreous china squatting pan, 'Orissa’ pattern, white of size 580mm x 440mm with integral foot rest, P or S trap (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F vitreous china bowl urinal flat back, of size 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing flush pipe grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S&F, vitreous china wash basin, white, flat back of size 550mm x 400mm including brackets grouted in cement mortar 1:2 in wall complete all as specified and directed. Note :- Supply only pillar taps, waste fittings, PVC connection, PVC waste pipe shall be measured and paid separately.

S&F, in repair, brass chromium plated shower rose with or without swivel joint, 125mm size complete all as specified and directed.

S&F, in repair, two way bib taps with hand faucet with 1.2 mtr brass flexible tube and wall hook mounted type chromium plate for EWC complete all as specified and directed.

S&F, two way bib taps with hand faucet with 1.2 mtr brass flexible tube and wall hook mounted type chromium plate for EWC complete all as specified and directed.

S&F, in repair, angular stop cock 15mm size complete all as specified and directed.

Supply only chromium plated heavy duty urinal spreader complete all as specified and directed.

S&F, in repair, vitreous china counter wash basin, oval type, flat back, 560 x 470 x 220mm size, snow white, inserted in granite slab chromium plated waste pipe of suitable length including taking down existing wash basin complete all as specified and directed.

Supply only 15 mm bore swan neck fancy type (long body) pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

Supply only PVC waste pipe 32mm bore of size 450mm to 600mm long complete all as specified and directed.

S&F, in repair, vitreous china wash down water closet pan including S or P trap (pedestal pattern), white with seat cover (including fixing bolts but excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F, vitreous were china wash down water closet (pedestal), white (ETWC) and fixed in repairs including seat cover with brass screws and excluding flush pipe and flushing cystern complete all as specified and directed.

S&F, vitreous china squatting pan, 'Orissa’ pattern, white of size 580mm x 440mm with integral foot rest, (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F, in repair, PVC low level flushing cistern 10 Ltr capacity including all fitting such as flush pipe brackets complete all as specified and directed.

S&F, in repair, brass chromium plated shower rose with or without swivel joint, 125mm size complete all as specified and directed.

S&F, in repair, Soap dish, China white, approximate size 160 x 160 x 90mm, fixed with screws complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc. 15cm thickness (below or above ground level) all as specified and directed.

Dismantling of cast iron, PVC or reinforced concrete drain pipes jointed in cement mortar for 110mm and 75mm bore of pipe from wall/floors etc complete all as specified and directed.

Taking down carefully copper/Aluminium point wiring (Light, fan, socket or power) complete including fitting such as switches, socket, bell pushes, ceiling roses, pendants/batten holder, call bell, regulators etc all as specified and directed by Engr-in-charge.

M&L for wiring with and including multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number, drawing through in and including, rigid non metallic, PVC concealed conduit of 20mm bore and including cutting chases for conduits and sinkings for boxes, its accessories & including with multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number as continuity earth wire terminating with provision sunken concealed terminal boxes complete all as specified and directed for the followings :-

(a) One light/fan /Exhaust point controlled by one switch

(b) One multi purpose socket 5 Amps, on the same board.

(c) One multi purpose socket 5 Amps, Independent board.

M&L for wiring with and including multistranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number drawn in and including medium grade PVC concealed conduit of 20mm bore fire resistant, ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes, etc. including multistranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire and including pressed steel sunken concealed terminal box complete all as specified and directed.

S&F, in repairs, LED light fitting, 1 x 20 watt 220V, AC, decorative box type with driver , holder , including LED tube light complete set flexible three core copper conductor cable of suitable size and testing on completion all as specified and directed.

S&F, lamp holder insulated body with back plate for battern fittings complete all as specified and directed.

S&F Switch piano, flush type 5 Amps One Way 230 volts complete all as specified.

S&F Switch one way 15 Amps flush type 230 volts complete all as specified.

S&F, in repair, socket outlet multipurpose, 3 pin, 15 Amps flush type complete all as specified and directed.

S&F Socket outlet 2-in-1 3 pin 6 & 16 Amps flush type 230 volts complete all as specified.

S&F, in repair, socket outlet 2 in1, 3 pin, 5 Amps, flush type complete all as specified and directed.

S&F Sheet metal enclosure double door for DB's SPN 8 way 240 V having 200 A rated bus bar complete all as specified and directed by Engr-Incharge.

S&F Ceiling rose 3 terminal size 50x65mm surface type 230 volts complete all as specified.

Supplying & laying, XLPE insulated, PVC inner sheathed, 6 Sqmm, 2 Core, armored with galvanized steel strip or wire heavy duty underground cable with aluminium multi stranded conductor, 1100 volt grade, laid in trenches/duct, passing through pipe/duct or fixed on pole and connecting and testing complete all as specified and directed.

Supply and laying in repair of GI pipe 40mm dia light grade below road/fixed to along the poles/walls with necessary clamping, including encasing the cable into the pipe all as specified and directed.

S&F, in repair, LED light decorative ultra slim round profile LED lightning with extured polycarbonate environmental friendly energy efficient ready to use pack 2 feet 9 watt 220 V AC including connecting up with three core flexible copper conductor cable of suitable size complete all as sepcified and directed.

Taking down existing exhaust fan and keeping in safe custody and re-installation the same after completion of work complete all as specified and directed.

S&F MCB SP 6-32A, 240 V -10 KA all as specified and as directed by Engineer-in-charge.

S&F, in repair, MCB’s SPN 32 Amps 240 volts with ‘C’ curve, fixed in sheet metal board complete including connecting.

Supply and fix of exhaust fan, 300 mm sweep, 1400 rpm, MS body heavy duty, AC single phase, 230 volts with, blades, and frame and louvers including connection with 0.5 sqmm multistranded copper conductor flexible wire from ceiling rose, necessary fixing arrangement i.e anchor nut, bolt, washer, grouting and making good to disturbed surface complete all as specified and as directed. Make : Crompton/Havells/Khaitan/Almonard/Bajaj

M&L, in repairs, earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth strip of 25x4mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I connected to earth test point using earth strip of 25x4mm as earth lead all as specified and testing on completion including provision of earth lead protected by 40 mm dia light grade GI pipe & watering pipe shall be 20 mm bore medium grade GI pipe including all excavation and earth work in any type of soil, PCC pit with RCC cover, char coal, salt, funnel etc complete. Note : Rate quoted by tenderers shall be deemed to include for following provisions:-[i]. Excavation & earth work in any type of soil including removing of surplus material upto 50 M.[ii]. PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles.[iii]. Main earthing lead from earth electrode to test point upto 7.5 mtr.[iv]. Funnel with watering pipe [GI pipe] 20mm bore [ISI marked] medium grade & copper lugs, charcoal & salt as reqd.[v]. GI protection pipe of size 40 mm bore light grade 7.5m.

M&L in replacement sub-main wiring with 2 single core 4 Sqmm PVC insulated, unsheathed, 1100Volts grade, copper multi stranded conductor drawn in and including PVC concealed conduit and conduit assessories including drawing a run of PVC insulated, unsheathed, 650/1100Volts grade, copper conductor multi stranded 4 Sqmm size as continuous earth wire drawn through and connected to main switch/ DB and testing on completion. Note: (i). 2 run of main conductor and one run of earth conductor shall be measured as one length. (ii) Rates quoted shall be inclusive of cutting wall for concealing conduit and making good the same in cement mortar 1:3.

DMA PROJECTS

Shree Khodal Infra Project

ARTI CONSTRUCTION

Shree Builders

Ramdev and Sons

SANVI ASSOCIATES

VIJAY CONSTRUCTION CO