ADDITION/ALTERATION TO STEP DOWN ICU (BLDG NO P- 98), SPECIAL REPAIRS TO TOILETS OF BUILDING NO P-139 IN MTC, SPECIAL REPAIR/REPLACEMENT OF LT CABLE OF HIGH PRESSURE HIGH SPEED AUTOMATIC AUTOCLAVE MACHINE AND CERTAIN MINOR AND REVENUE WORKS AT CHAFB

Amount

Part I (B&R Portion) Taking down chowkat or frame with shutter (without taking off shutter from the frame) n.exc. 1.5 sqm each, making good disturbed surfaces and removing materials from site of work complete all as directed.

Taking down chowkat or frame with shutter (without taking off shutter from the frame) exc. 1.5 sqm and n.exc 4 sqm each, making good disturbed surfaces and removing materials from site of work complete all as specified.

Taking down steel windows/ ventilators all as directed

Dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish off the premisies complete all as specified and directed.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified.

Demoltion of Brickwork or stone/boulder masonry, laid complete all as specified.

Dismantling of aluminium glass partition including frame glass and board etc complete all as specified.

Taking down cement plaster any description complete all as specified.

M & L Granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15 mm thick screed bed in CM 1:4 complete all as specified.

S & F Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x330mm x 160mm complete all as specified.

M & L for Sand filling under floors or in foundations including watering and consolidation

Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete.

M & L Brickwork with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished smooth and even without using extra cement complete all as specified.

M & L Precast cement concrete 1:2:4 type B1 set in CM 1:4 in landings, cover slabs shelves and similar articles with plain faces etc complete all as specified.

Material and labour cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in lintels upto 1.50 m span ,cills and other similar bands, plinth courses ,parapets,coping bed blocks and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work etc complete all as specified and as directed

M & L for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded granite stone aggregate) in floorings including finishing the surface even and smooth without using extra cement complete all as specfied and dierected.

M & L for Powder coated Aluminium sliding windows of three tracks outer frame top, side sections, bottom frame(track) with guide track of size 92.5x31x1.50mm with sliding window shutters two nos with glass and one no with wire mesh(total 3 nos shutter) frame top and side bottom section with wheel track and inner locking section of size 40X18X1.5mm inculding glass 4 mm thick and aluminium wire cloth, 0.45mm nominal dia wire and average width of aperture 1.40mm complete all as specfied and dierected.

S & F Powder coated Aluminium Frame work for grills Deco-grill Model DG-104 (10mm) making shape and riveted with rivets and fixed with suitable channel complete necessary fixing arrangements etc.,completed and directed.

S & F Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc (Minimum thickness of powder coating 50 micron) complete all as specified.

S & F powder coated Anodised aluminium door shutters, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S & F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified.

S&F for 4mm thick sheet glass frosted ordinary quality and glazing with oil putty in square not exc. 0.50 sqm in each pane complete all as specified and as directed.

S & F 12 mm thick both side Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified.

S & F Anodised aluminium snap grid frame work for false ceiling all as specified

S & F in ceiling 4 mm thick (precoated E board) Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified.

M & L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over 15 mm thick screed bed in CM 1:6 for laying floor finishes complete all as specified and as directed.

M & L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over 15 mm thick screed bed in CM 1:6 for laying floor finishes complete all as specified and as directed.

M & L Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick in CM 1:4 rendering for laying wall tiles complete all as specified and directed

S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed

S&F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed

S&F 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S & F 100mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type C 22 etc complete all as specified and directed.

S&F 125 mm Aluminium handles, cast type, anodised complete all as specified and directed

S&F 150 mm Aluminium handles, cast type, anodised complete all as specified and directed

S&F 125mm Aluminium anodised, barrel tower bolts of extruded section and fixed

S&F 150mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed

S&F in repairs bib taps, fancy type with long neck chromium plated with crutch or butterfly hadle screwed down screwed for iron pipe or brass ferule of 15mm bore complete all as specified and as directed.

S&F Bib taps, fancy type with long neck chromium plated with crutch or butterfly hadle screwed down screwed for iron pipe or brass ferule of 15mm bore complete all as specified and as directed.

S&F in repairs grating doom 125 mm dia with waste hole of PTMT (minimum weight 40 gms.) complete all as specified and directed

Taking up or down steel tubing and connections,15mm bore including cleaning for serviceable pipe for re-fixing or removal of unserviceable pipe from site of work complete all as directed.

All as per item No.42 here in before but 20mm bore.

All as per item No.42 here in before but 25mm bore.

Re- fixing 15mm bore GI tubing, medium grade with provn of new fittings as required and fixing accessories in new or old position (walls,ceiling floor etc) including testing complete all as directed.

All as item No 45 herein before but 20mm bore.

All as item No 45 herein before but 25mm bore.

M&L cutting chases for concealed water tubing and making good in cement mortar 1:3 cutting not exceeding 10 cm girth etc complete all specified and directed.

S&F GI tubing,medium grade,15mm bore with all fittings fixed to walls and ceiling or laid in floors including testing complete all as specified and directed.

All as item No 49 herein before but 20mm bore.

All as item No 49 herein before but 25mm bore.

S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints,laid in floors including dismantling old pipe complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and as directed.

S&F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and as directed.

S&F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in floors including dismantling old pipe complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) junction single( single T) equal or un equal all as specified and as directed.

S&F 110 mm bore PVC (SWR) branch piece single ( single Y) equal or un equal all as specified and as directed.

S&F 75 mm bore PVC (SWR) junction single( single T) equal or un equal all as specified and as directed.

S&F 75 mm bore PVC (SWR) branch piece single ( single Y) equal or un equal all as specified and as directed.

S&F 75mm bore PVC (SWR) bends with access door of any radious all as specified and directed.

S & F in repair 75 mm dia PVC (SWR)bends with rubber rings joints fixed as required complete all as specified and as directed

S&F 110mm bore PVC (SWR) bends with access door of any radious all as specified and directed.

S & F in repair 110 mm dia PVC (SWR)bends with rubber rings joints fixed as required complete all as specified and as directed.

S & F Soap dish, vitreous China white, approximate size 160 x 160 x 90mm complete all as specified and directed

S & F Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long with aluminium alloy brackets andguard rail complete all as specified and directed.

M&L applying two coats of oil bound distemper oil emulsion over alkali resistant primer over 3 mm thick wall putty complete all as specified and directed.

Taking down PVC ( SWR) pipes any ( any size or pattern) including all fittings head shoes etc complete all as specified and as directed

Removing building materials etc. exc 1.50 KM including loading, unloading and stacking at the destination complete all as specified and directed.

M & L Mild steel TMT bars 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed

S & F Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles confirming to Fe 410-O 0r Fe 310-O complete all as specified and directed.

S & F 2nd class Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc complete all as specified and directed

S & F Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc complete all as specified and directed.

M&L for preparation of untreated new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality ) over a coat of red oxide primer complete all as specified and as directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19mm x 19mm MS square tube EPDM rubber gasket weather seal to be provided through out the frame, the profile shall be mitre cut at two corners and jointed by inserted 2mm of 150mm long bracket of 15mm x 15mm MS square tube inside the 19mm x 19mm MS square tube and suitable screwed the door frame shall be fixed to the wall using PVC fasteners. A minimum of 6Nos screws to be provided for each frame all as specified and as directed. Note: The quoted rates are deemed to be included for cutting holes, providing concrete for hold fast and making good to the disturbed surfaces.

Supply and fixing in the frame. factory made solid panelled PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail and bottom rail ,panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet bedding and joint together with solvent cement etc complete all as specified and directed.

S&F Pressed steel frames of size 105 x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F Mild steel work as in band, strap, hold fast, clamp, cleat, hook, hinges base tie for floor, frame, support or stay for rain water pipe etc and other similar items conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1(using 20mm graded aggregate) as in hold fast block and pressed steel frame including necessary form work etc complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1(using 40mm graded aggregate) as in foundation and mass filling etc complete all as specified and directed.

M & L for pre-cast cement concrete block masonry type C1 1:3:6 (20 mm graded aggregate) with solid blocks, exc 10 cm width and setting in CM 1:6

S&F well seasoned 2nd class hard wood small fittings such as bracket of any type, latch and hinge block, shaped door or window stop and like n.exc 200 Cucm each including 50mm long mild steel hinges complete all as specified and as directed.

S&F 300mm MS sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia withand including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all as specified and directed.

S&F 150 mm MS pressed handles oval type black Japan etc complete all as specified and directed..

S&F 150mm MS barrel tower bolts, stove enamelled black with bright bolt and fixed etc complete all as specified and directed..

M&L for Non Skid ceramic tiles coloured of size 300 x 300 x 7 to 8mm thick as in floor, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles over 15mm thick screed bed in CM 1:6 for laying floor finishes complete all as specified and as directed.

M&L for Glazed ceramic tiles coloured of size 300 x 200 x 5 to 6mm thick as in dado, skirting. riser to steps, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles complete all as specifiedc and as directed over 10 mm thick rendering in CM 1:4 for laying wall finishes complete all as specified and as directed.

S&F in repairs steel window with side hung shutter including projecting type hinges with steel handles and steel peg stay and with glazing bars complete with dovetailed or welded including taking down of old unserviceable window etc complete all as specified and directed.

All as item No 88 here in before but without glazing bars.

S&F framed work such as grills,gratings,etc with ends of bars, shouldered and / or riveted.or forged into spikes,framed guard bars barred iron doors ladders.framed balusters walk ways railings framework of watertanks and similar etc complete all as specified and directed.

S&F in repairs steel ventilator with top hung shutter including hinges steel peg stay complete including taking down of old unserviceable ventilator etc complete all as specified and directed.

S&F Steel ventilator with top hung shutter including hinges steel peg stay complete including taking down of old unserviceable ventilator etc complete all as specified and directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed.

S&F in repairs Vitreous China urinals, bowl type (back or corner wall type), half stall complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) etc complete all as specified and directed.

S&F in repairs Urinal Spreader of CP (Push type) for fixing with 15mm dia pipe etc complete all as specified and directed.

S&F CP health faucet with all accessories comlpete all as specified.

S&F in repairs vitreous china wash basin 550 x 400mm size white including brackets,CP waste coupling waste pipe,short connection complete all as specified and directed.

S&F Vitreous china wash basin 550 x 400mm size white including brackets,CP waste coupling waste pipe,short connection complete all as specified and directed.

S&F 15mm pillar tap,cast copper alloy, with capstan head, chromium plated, fancy type screwed down high pressure,with or without lettered "hot" or "cold" with long screwed shank and fly nuts screwed for iron pipe of 15mm bore complete all as specified and as directed.

S&F in repairs vitreous china squatting pan Orrisa pattern of size 580 X 440mm white with integral foot rest 'P' trap including connection to trap and flush pipe anti-syphonage pipe etc complete including making good to floor etc complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (Pedestal Pattern), White with 'P' or 'S' trap, including provision of fixing bolts and connecting upto drain and flushing pipe etc complete all as specified and directed.

S&F Vitreous China wash down water closet pan (Pedestal Pattern), White with 'P' or 'S' trap, including provision of fixing bolts and connecting upto drain and flushing pipe etc complete all as specified and directed.

S&F plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed.

S&F in repair PVC flushing cistern with flush out valve type,10 ltrs capacity,low level white with inlet ball valve,float and handle including bracket including flush pipe etc complete all as specified and directed.

S&F in repair 15mm bore PVC connection pipe 450mm long with PTMT nuts at bolt ends etc complete all as specified and directed.

S & F 40 mm dia, Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc, with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F chromium plated tubular towal 20mm dia, D type, 60 cm long between flanges complete all as specified and directed.

S&F in repair stop valve,fancy type chromium plated with long shank and cup (concealed type) (medium) screwed down,high pressure with crutch or butterfly handle,screwed both end for iron pipe or for union of 15mm bore complete all as specified and directed.

S&F in repair stop valve,fancy type chromium plated (medium) screwed down,high pressure with crutch or butterfly handle,screwed both end for ironb pipe or for union of 15mm bore complete all as specified and directed.

S&F Stop valve,fancy type chromium plated (medium) screwed down,high pressure with crutch or butterfly handle,screwed both end for ironb pipe or for union of 15mm bore complete all as specified and directed.

S&F in repairs 125mm dia brass chromium plated shower rose including arm with swivel joints including fixing to steel pipe or unionetc complete all as specified and directed.

S&F in repairs brass CP towel rail, 20mm dia,600mm long including brass CP brackets etc complete all as specified and directed.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement etc complete all as specified and directed.

S&F 100mm PVC traps 'P' or 'S' etc complete all as specified and directed.

S&F PVC down pipe to wash hand basins fixed to waste coupling to match the floor level complete all as specified and directed.

S&F Rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 Ltrs complete all as specified and directed. Make :- Sintex or equivalent approved make

M&L for applying one coat of white wash including preparation of old decorated plastered or unplastered surfaces of walls including brooming down smoke soot moulds, mass and efflorescent salts and trading oil and greasy spots etc complete all as specified and directed.

Preparing newly plastered surfaces of walls and applying three coats of white wash etc complete all as specified and directed..

M&L preparation of plastered or un plastered old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.

M&L preparation of plastered or un plastered old decorated surfaces of walls and applying one coat of cement base paint complete all as specified and as directed.

Removing complete existing roof treatment on roof surfaces including cleaning and washing down with water all as directed.

M&L for preparing newly plastered surfaces of walls and alkali reistant priming paint over a two coats of weather proof paint on external wall surfaces etc complete all as specified and directed.

M& L brushing neat cement slurry with 3 kg of cement per sqm etc complete all as specified and directed.

M & L Rendering 15 mm thick in CM 1:3 mixing with waterproofing compound on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement Note : WPC will be measured and paid seperately.

Supply only integral waterproofing compound

Material and labour for waterproofing treatment on horizontal and vertical surfaces with applying of oilbound bituminous primer@ 0.20 Kg/sqm and providing 4mm thick APP modified waterproofing membrane weighing not less than 4.00 Kg/sqm reinfored with nonwoven polyster matt weighing not less than 160 grm/sqm including minimum 10 cm side overlaps and 15 cm end laps torched sealed bonded as per detailed procedure on note No 6 of TD drawing No AFB/TD/260/06 sheet No 1/1 (R) and applying a coat of blown grade @1.2 Kg per sqm hot bitumen 90/15 over and below the membrane finished with solar reflective bituminuous aluminium paint/primer @0.10 kg per sqm all as specified and as directed.

Demolition of plain cement concrete of any description and in any position all as specified and directed.

Demolition and breaking up drain pipes of 100mm internal dia ( Salt glazed ware, AC or Reinforced concrete ) set in cement mortar all as specified and directed.

Demolition and breaking up drain pipes of 75mm internal dia ( Salt glazed ware, AC or Reinforced concrete ) set in cement mortar all as specified and directed.

M&L Cutting holes for pipes for a superficial area exceeding 150 Sqcm and not exceeding 400sqcm into or through brick walls built in CM and making good in cement mortar 1:3 or 1:2:4, type B1 all as specified and as directed.

M&L Cutting holes for pipes for a superficial area exceeding 150 Sqcm and not exceeding 400sqcm into or through stone wall built in CM and making good in cement mortar 1:3 or 1:2:4, type B1 all as specified and as directed.

Rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) mixed with WPC as per manufacturers instruction all as specified and as directed. Note : WPC will be measured and paid seperately.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished fair and even without using extra cement.

M&L for rendering 15mm thick on external brick masonry surfaces or surfaces fair faces of brick work or on one side of lathing in cement mortar 1:4 (5 mm) and 1:6 (10 mm) and finished fair and even without using extra cement mixed with WPC complete all as specified. Note :- WPC Paid and measured separately.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) mixed with WPC as per manufacturers instruction all as specified and as directed. Note : WPC will be measured and paid seperately.

M&L preparation of new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.

M & L for applying a coat of water proofing chemical NITTO Proof 120 of FOSROC over a coat of NITTO Primer of FOSROC over concrete surfaces/plastered surfaces for floor and wall surfaces of sunken floors all as per specified.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position capacity exc 250 & nexc 500 litre etc complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position capacity exc 500 & nexc 1000 litre etc complete all as specified and directed.

Taking down PVC (SWR ) pipes ( any size or pattern) including all fittings head shoes etc complete all as specified and as directed

S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement etc complete all as specified and as directed.

Supply and fix Stainless steel double door (Pass box for Operation Theater) made of 304 Grade, dimension of door shutter 640mm X 500 mm and frame around the door shutter for both sides. The door should have heated surface, temperature ranging between 35-40 degree Celsius (accuracy of one decimal point) with a digital display. It should be provided with UV light of 8 watts. It should have a 40 watt fluorescent lamp, controlled by interlocking arrangements, when the doors are in closed position, the lamp is on. The entire unit should have electromagnetically locking arrangement with LED indicator to shoe whether door is open complete all as specified and as directed. Note :- It should have a manufacturer warranty of 5 year from the date of installing. The product shall be got approve from concerned medical authority of CHAF Bangalore through Engineer in Charge before procurement. A Sketch 'Q' is enclosed for reference.

Part II (E&M Portion) Excavating in trenches n.exc 1.5M wide and n.exc 1.5M depth for getting out for laying of UG cables in hard dense soil etc complete all as specified and directed.

Excavating in trenches n.exc 1.5M wide and n.exc 1.5M depth for getting out for laying of UG cables in soft loose soil etc complete all as specified and directed.

Returning filling including spreading levelling watering well ramming in layers no exceeding 25 cm thick all as specified and directed.

Removal of excavated material not exceeding 50 mtr and depositing where directed at level not exceeding 1.5m above the starting point all as directed.

Supply and spread clean dry river sand in cable trenches as in cable cushioning all as specified.

Burnt bricks, sub class 'B' of designation 75, standard size laid in trenches as in protection of UG cables all as specified and as directed.

Taking down old unserviceable LT UG cable any type any size

M&L for LT UG Cable XLPE insulated, armoured, heavy duty with multistranded aluminium conductor, 1100 volts grade, cross -sectional area 3.5 core x 240 Sqmm laid in trenches or fixed to walls/ poles or passing through pipes with and including lugs/ thimbles/ ferrules including connecting, testing and commissioning complete all as directed and specified

M&L in repair/replacement of sub main wiring with copper conductor FRLS multistranded 1100 volts grade 4x25 sqmm in and including heavy grade PVC casing and capping/PVC conduit and its accessories with fixing arrangements on surface, wall, floor or ceiling etc including 2x16 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : two run of earth continuity conductor,one run of PVC casing capping/PVC conduit and four run of copper conductor together taken as one length for measuring unit length.

M&L in Replacement GI tubing, medium grade,100 mm bore, as in cable protection fixed to poles/walls or laid in trenches / under roads / crossing etc. including taking down Old unserviceable GI Tubing, all as specified and as directed.

M&L in replacement of Boring of holes under road pavement hard standing by manual boring incl making good the disturbed surfaces complete all as specified and directed

Taking down old unserviceable LT Panel complete accessories of any type and capacity complete all as specified and directed

Supply, installing, testing and commisioning of LT cubical panel board 440 volts , 50 Hz , 3 phase , 4 wire ,In door type IP-65 and above , vermin, dust proof, front operated with adequate air ventilation at sides and back fabricated out of 2 mm thick CRCA sheet with shutter and locking arrangements cable lugs ,cable gland etc.including provision for taking out incoming and outgoing cables duly marked with relevetted letter plates of appropriate size for ech feeder cables danger board etc , suitable to accomodate and including the following mentioned fittings , floor mounted with PCC 1:2:4, type B1 platform of 50 cm height suitable nut bolts, washer etc. for grouting , and painting with power coated epoxy finish of approved colour over a coat of red oxide primer with all accessories all as specified and as directed comprising the following:- (i) Bus bar chamber consisting of four Nos Aluminium bus bars duly sleeved of capacity of 600 Amps for phases and 300 Amps for neutral. Duly insulated with PVC sleeves RYB , mounted on heavy duty epoxy insulation in separate compartment. (ii) Digital type Voltmeter and Ammetere . (iii) LED type indicating lamps (RYB) with holders controlled by fuses and swicthes . (iv) Panel board internal wiring with suitable rated PVC insulated copper conductors. Note:- The LT panel board shall be made to suitable size to accommodate the following fittings and Rate included Excavation, earth work complete all connected work (i) MCCB 400 Amps 4 pole 36 kA, Adjustable Thermal and magnetic release - 1 No (in coming). (ii) MCCB 200 Amps 4 pole 25 kA, Adjustable Thermal and fixed magnetic - 2Nos (Out going) . (iii) MCCB 100 Amps 4 pole, 25 kA, Adjustable Thermal and fixed magnetic - 2Nos (Out going). (iv) Spare chamber for Out going MCCB (v) ON Load Changeover switch 400 Amps 3 phase AC , 4 pole,415V -01 No.

M&L in replacement of old unserviceable MCCB,4 pole,415 Volts,100 Amps, 25 KA, 50 Hz, AC ,Adjustable magnetic and thermal type, including connecting up incoming/ out going cables with suitable lugs and testing complete all as specified and as directed. Make:Legrand/Sceinder/Siemens/Hevells

S&F in replacement of sheet metal enclosure made out of 2mm thick CRCA sheet duly power coated suitable for fixing/mounting MCCB of 100Amps 4 pole duly fixed on wall with all fixing arangements all as directed. Make:Legrand/Sceinder/Siemens/Hevells

M&L for Earthing complete with copper earth plate 60 cm x 60 cm x 3.15 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less than 1.5 mtr filled around with layer of charcoal dust and salt and connected to copper earth strip size of 20x3 mm by means of bolt nut and cheek nuts and washers of galvanized iron or steel and thimble and other ends of the earth strip connected to main switch board and protected by galvanized iron pipe light grade 40 mm bore and watering pipe 20mm dia light grade with funnel and wire mesh pcc 1:3:6 in chambers RCC 1:2:4 in pit cover reinforecd with 8 mm dia deformed bars 15 cm center both ways etc complete all as specified and directed.

S&F Aluminium Earth continuity strip of size 25x3mm duly munted on PVC insulator fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. complete with saddles and fixing screws etc complete all as specified and directed.

Supply and fixing perforated cable tray of size 60 x 60 x 2mm made out of MS sheet powder coated fixing on wall with all fixing arrangements incl bends , cable tie, it also included equal angle iron support of size 35x35x4mm at a distance of 0.8m in high fastness of suitable size completed all as specified and directed.

M & L for LT UG Cable XLPE insulated, armoured, heavy duty with multistranded aluminium conductor , 1100 volts grade , cross -sectional area 3.5 core x 95 Sqmm laid in trenches or fixed to walls/ poles or passing through pipes with and including lugs/ thimbles/ ferrules including connecting, testing and commissioning complete all as specified and as directed.

M&L GI tubing, light grade, 80mm bore, as in cable protection fixed to poles/walls or laid in trenches / under roads / crossing etc all as specified and as directed.

Supply & Fixing single door Sheet metal enclosure for frame - 4, including fixing 4 pole 415V MCCB 315/320A ,50Hz etc complete all as specified and directed. Make : Indoasian Cat No : 811991 or Equv in L & T /Havells /Schinider /ABB /Legrand

Supply & Fixing of MCCB, 4 pole, 415 Volts, 320/315 Amps, fixed thermal ,fixed magnetic, 36 KA, 50 Hz, AC in sheet metal enclosure including connecting up incoming / out going cables with suitable lugs and testing complete all as specified and as directed. Make: Indoasian,Cat No: 83075 or Equivalent in L&T/Havells /Schinider /ABB /Legrand

Material & Labour for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to galvanised earth strip of size 25 x 4 mm by means of bolts, nuts and washers of galvanised iron or steel all as shown in elecrtical plate No 3 of SSR part I, connected to DB/earthing test point including PCC chamber , RCC cover 50mm thick with 8 mm dia bars, protection pipe, funnel etc including excavation, earth work, disposal of surplus soil and earth strip protection pipe of GI 40 mm bore light grade upto 7.5 metre including testing on completion all as specified and as directed.

M & L Point wiring complete with 1100 volts grade single core, PVC insulated FRLS cable with multi-stranded copper conductor of size 1.5 sq mm nominal area, passing through heavy grade PVC casing casing 'N' capping/ PVC conduit of suitable size, with all necessary fittings on wall/ roof surfaces, duly earthed with one run of single core PVC insulated FRLS cable with multy stranded copper conductor of size 1.5 sqmm nominal area green in colour as continues earthing wire connected to common earth dolly including 1.6 mm thick fabricated CI/MS sheet terminal box concealed mounting in the wall for mounting switches,switch socket combination, fan regulators etc.covered with 3mm thick electroplated hylam sheet top cover for housing switches, sockets, regulators etc. complete for one light/ fan point controlled by one single pole 5 amps switch/socket including 1 run of 1.5 Sqmm green colour copper cable as continuous earth wire all as specified and as directed. (a) One light point controlled by one single pole 5 Amps switch/One light point controlled by one rotory switch/MCB

(b) One fan point controlled by one single pole 5 Amps switch

(c ) One switch socket out let point 5 Amps on same board with other switches

(d) One switch socket out let point 5 Amps on independent board

Supply and fixing Piano type switch single pole 5 Amps one way 230 volts all as specified and as directed

Supply and fix socket outlet 5 pin, 5 Amps, flush type, universal complete all as specified and directed.

M & L Point wiring complete with 1100 volts grade single core, PVC insulated FR cable with multi-stranded copper conductor of size 2.5 sq mm nominal area, passing through heavy grade PVC casing / PVC conduit of suitable size, with all necessary fittings on wall/ roof surfaces, duly earthed with one run of single core PVC insulated FR cable with multy stranded copper conductor of size 2.5 sqmm nominal area green in colour as continues earthing wire connected to common earth dolly including 1.6 mm thick fabricated CI/MS sheet terminal box concealed mounting in the wall , covered with 3mm thick electroplated hylam sheet top cover for housing 15 A switches, 15A sockets including 1 run of 2.5 Sqmm green colour copper cable as continuous earth wire all as specified and as directed.

Supply and fixing switch 15A flush type universal pattern 230 v all as specified and as directed

Supply and fixing socket outlet 5 pin multi purpose 5/15 Amps flush type all as specified and as directed

S&F fan regulator electronic type 5 step and connecting all as specified and directed

S&F lamp holder bakelight body batten type all as specified and directed.

S&F LED Bulb 10Watt all as specified and directed. Make Havells or equivalent philips,wipro

Supply and fix ceiling rose surface bakelite 65x25mm, two to three termimals complete all as specified and directed.

Supply and fixing heavy duty exhaust fan 3 blade 300mm sweep working in AC single phase 900 RPM with louver shutter on wall with necessary fitting, bolt, nuts and washer connecting up with ceiling rose with 3 core flexible cable including necessary arrangement for making hole on wall and holding frame etc complete all as specified and directed. Make Havells Model Turbojet SP or equivalent in Bajaj/Orient

Supply & fix ceiling fan complete and with all accessories 230 V,1200 mm sweep. BEE 5 star rated Make Orient,Crompton,Bajaj,Havells ES 50 etc complete all as specified and directed.

Supply and fixing LED light fitting, 20watt Surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver. including connecting up with twin core flexible copper conductor cable with suitable size all as specified and as directed. Make:- Havells Model ENDURALINEARNEOBS20WLED865SPCWH or equivalent in CROMPTON GREAVES/PHILIPS/WIPRO.

Supply and fixing LED light fitting, 42watt 2"x2" Ultra modern designed architectural LED luminaire which provides soft-light and glare free symmetrical illumination suitable for Armstrong/Grid ceiling including connecting up with twin core flexible copper conductor cable with suitable size all as specified and as directed. Make: Havells Model VENUSNEOHE2X2PLR42WLED8XXS or equivalent model in CROMPTON /PHILIPS/WIPRO.

M & L sub main wiring with Two single core PVC insulated cable with copper conductor FRLS multistranded 1100 volts grade 2x10 sqmm in and including heavy grade PVC casing and capping/PVC conduit and its accessories with fixing arrangements on surface, wall, floor or ceiling etc including 10 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC casing capping and two run of copper conductor together taken as one length for measuring unit length.

Supply and fix sheet metal enclosure double door type for DBs for mounting of MCB for 240V, 12 way with 200 Amps rated Bus bar, single pole & neutral, fixed in repairs complete all as specified and directed.

Supply and fix sheet metal enclosure double door type for DBs for mounting of MCB for 240V, 4 way with 200 Amps rated Bus bar, single pole & neutral, fixed in repairs complete all as specified and directed.

Supply and fix miniature circuit breaker (MCBs) single pole, 240 volts, 10KA, 6 to 32 Amps C series complete all as specified and directed.

Supply and fix miniature circuit breaker (MCBs) SPN, 240 volts, 10KA, 63 Amps C series complete all as specified and directed.

Supply and install air cooled split type Air conditioner electric driven single phase 50 HZ,with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star inverter rating and EER 3.2.of capacity as 2 Ton complete by indoor unit on wall of room and out door unit out side exposed to open space on surface with suitable foundation or wall with proper fixer including insulating all the refriferent piping complete all as specified and directed. Make Voltas or equivalent makeLG/ Samsung/Bluestar/Carrier

Supply and fix voltage stabilizer for automatic operation single phase naturaly air coooled indoor operation and design for input variation 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of + 2.5% and of capacity 4KVA connected with existing point all as specified and directed . Make: V GuardVW400/ Sinetec/Powertec

S&F sheet metal enclosure with a two pin and earth plug and socket complete with one SPN MCB 32 amps, 240 volts.all as specified and directed

M & L sub main wiring with Two single core PVC insulated cable with copper conductor FRLS multistranded 1100 volts grade 2x4sqmm in and including heavy grade PVC casing and capping/PVC conduit/Steel Conduit and its accessories with fixing arrangements on surface, wall, floor or ceiling etc including 4 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC casing capping/PVC conduit/Steel conduit as required and two run of copper conductor together taken as one length for measuring unit length.

Supply, laying, testing and connecting XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, heavy duty, electric power cable LT 1100V grade with stranded aluminium conductor cable laid in trenches/ fixed on walls etc of size 3.5 core x 70 sqmm alongwith connecting accessories like lugs & gland etc complete all as specified and directed.

Supply and fix distribution board Loadline DBs are fitted with Bus Bars, Neutral Links, Blanking Plates (without MCCB) double door vertical suitable for TP/FP ‘G frame’ MCCB complete all as specified and directed. Make: Havells Cat No DHDLVDRWGOFO04 or equivalent model in ABB/Schneider.

Supply and fix MCCB 100 Amps fixed thermal fixed magnetic setting, 430 volts, 10 KA, complete all as specified and directed.

Supply and install air cooled tower type Air conditioner 3 Ton electric driven three phase 50 HZ,with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum rating EER 3.2.of capacity 3 Ton complete with indoor and outdoor unit all as specified and directed. Make Voltas venture slimline tower AC or equivalent make in LG/Samsung/ Bluestar/Carrier

Supply and fixed four core PVC insulated cable with stranded copper conductor of size 4 sqmm fixed in and incl concealed non matalic PVC conduit/PVC cassing capping including copper earth wire 4 sqmm complete as specified. Note – Five run of cable shallbe treated as single run including three phase one neutral and Earth

S&F sheet metal enclosure with a triple pole and earth enclosure with a three pin and earth plug and socket complete with one TPN MCB 32 amps, all as specified and directed

Supply and fixing LED tuberod 20W with single side connection Ultra bright LED polycarbonate Tubelight with very high efficacy suited for T8 fitting with G13 lamp holders including necessary connection suitable for tuberod.Make-Crompton model LT8-20-865-2 equivalent model in PHILIPS/WIPRO/BAJAJ.

Supply and fixingLED tuberod batten suitable for Led T8 lamps with internaly pre-wired etc complete all as specified and directed. Make:- Crompton model DMLN1LT8-16 equivalent in PHILIPS/WIPRO/BAJAJ.

Supply and fixing exhaust fan 3 blade 300mm sweep working in AC single phase 900 RPM with louver shutter on wall with necessary fitting,bolt,nuts and washer connecting up with ceiling rose with 3 core flexible cable including necessary arrangement for making hole on wall and holding frame etc all as directed. Make Havells Model Turbojet SP or equivalent in Bajaj/Orient

M & L Point wiring complete with 1100 volts grade single core, PVC insulated FRLS cable with multi-stranded copper conductor of size 1.5 sq mm nominal area, passing through heavy grade PVC casing casing 'N' capping/ PVC conduit of suitable size, with all necessary fittings on wall/ roof surfaces, duly earthed with one run of single core PVC insulated FRLS cable with multy stranded copper conductor of size 1.5 sqmm nominal area green in colour as continues earthing wire connected to common earth dolly including 1.6 mm thick fabricated CI/MS sheet terminal box concealed mounting in the wall for mounting switches,switch socket combination, fan regulators etc.covered with 3mm thick electroplated hylam sheet top cover for housing switches, sockets, regulators etc. complete for one light/fan point controlled by one single pole 5 amps switch/socket including 1 run of 1.5 Sqmm green colour copper cable as continuous earth wire all as specified and as directed.

Supply and install Refrigerator,double door frost free electric driven BEE 3 star rating (single phase 230V 50Hz), of capacity up to 308 ltrs stabilizer free operation connecting with power supply point all as specified. Make LG/Godrej/Voltas/Samsung

M & L Point wiring complete with 1100 volts grade single core, PVC insulated FRLS cable with multi-stranded copper conductor of size 1.5 sq mm nominal area, passing through heavy grade PVC casing casing 'N' capping/ PVC conduit of suitable size, with all necessary fittings on wall/ roof surfaces, duly earthed with one run of single core PVC insulated FRLS cable with multy stranded copper conductor of size 1.5 sqmm nominal area green in colour as continues earthing wire connected to common earth dolly including 1.6 mm thick fabricated CI/MS sheet terminal box concealed mounting in the wall for mounting switches,switch socket combination, fan regulators etc.covered with 3mm thick electroplated hylam sheet top cover for housing switches, sockets, regulators etc. complete for independent socket all as specified and as directed.

Supply and install air cooled tower type Air conditioner 2 Ton electric driven three phase 50 HZ,with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum rating EER 3.2.of capacity 2 Ton complete with indoor and outdoor unit all as specified and directed Make Voltas venture slimline tower AC or equivalent in LG/Samsung /Bluestar/Carrier

S & F Copper tube, 15 mm / 18 mm dia, superior quality suitable for suction lines of split ACs, drawn trough pipes/ fixed to walls/ laid on floor or roof all as specified and as directed

S & F Copper tube, 9 mm dia, superior quality suitable for liquid lines of ACs, drawn trough pipes/ fixed to walls/ laid on floor or roof all as specified and as directed.

Supply and fixed three core PVC insulated cable with stranded copper conductor of size 4 sqmm fixed in and incl concealed non matalic PVC conduit/PVC cassing capping with copper earth wire 4 sqmm complete as specified. Note – Four run of cable shall be treated as single run including two phase one neutral and Earth

S&F sheet metal enclosure with a two pin and earth plug and socket complete with one SPN MCB 32 amps, 240 volts.all as specified and directed

S&F flame proof, weather proof LED fittings complete with control gear equivalent CMRI Certified LED Flameproof 1X16W LED Tube Light fixture.Recommended for Gas / Vapor Group of IIA & IIB and Zone 1 & IP65 Protection all as specified and directed. Make Crompton Model EXTN1LT8-16/20 or equivalent in Sudhir/Havells

S&F flame proof ON/Off rotory switch 240V, 16 A in LM -6 all as specified and as directed. Make Flexpro,Cat No RI/OA/1010-2A or equivalent in Sudhir/FEPL.

S&F switch socket combination with plug 2 pole and one earth in LM 6 , 250 V 16A DP all as specified and directed. Make :- Sudhir, Cat No SS/OA/1010 or equivalent in Flexpro

S&F Manual Call Point for fire alarm system all as specified and directed.

Supply and fix Electronic Hooter 65 DB to 120 DB for fire alarm system as all as specified and as directed

Supply and fix Combine Smoke/Heat Detector for fire alarm system as all as specified and as directed

Supply and fix Response Indicator for fire alarm system as all as specified and as directed

Supply and fix PVC cable1.5 sqmmx 2 core Copper Armoured type for fire alarm system as all as specified and as directed

Supply and fix 04 Zone Fire Alarm control panel with complete accessories for fire alarm system as all as specified and as directed

Supply and fix Junction Box for fire alarm system as all as specified and as directed

Supply and fix Cable Gland for fire alarm system as all as specified and as directed

GKR and CO