Renovation of Marketing Complex Bldg No 231 at RFI

Removal of spoil: Labour only for removal of spoil mixed with excavated earth, damaged tarfelt, damaged plaster, broken bricks, concrete rubbish and debris, broken glasses etc. from work site to a distance of 1.50 km. outside the factory. (20% deduction in measurement will be made from the volume of spoil ) all complete.

Post Construction Anti-Termite treatment on concrete/ masonry surface: Material & labour for providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment along external wall of buildings below concrete or masonry apron using chemical emulsion@ 2.25 liters per linear metre including drilling and plugging holes etc. in apron all complete.

P.C.C. (1:2:4) : M & L for providing plain cement concrete type-B1, 1:2:4 mix (using 12.5 mm graded stone aggregate ) as in sub-base, filling and mass concrete, topping of floor all complete.

Cutting of floors : M & L for cutting opening in cement concrete walls, floors etc. (any description) and making good the same all complete.

R.C.C. (1:1.5:3) : M & L for providing reinforced cement concrete type M-20, 1:1.5:3 mix (using 20 mm graded stone aggregate) as in foundation including footings plinth beams bases for column roof slab beam lintels and excluding use and waste of necessary formwork all complete.

Half brick thick Brick Work : M & L for providing half brick thick brick work with sub-class 'b' bricks, old size in cement mortar 1:4 straight or curved on plan to any radius all complete.

Cutting holes: Labour only for Cutting holes exc. 150 sq.cm and not exceeding 400 sq. cm into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required all complete.

Form work : Use & waste of wooden form work to sides and soffits of beams, roof slabs, chajjas, columns, pillar etc. and the like, vertical or batter rough finished flat surfaces all complete.

Wooden Framed Work : S & F wooden framed work with 2nd class hard wood (sal) plain, solid, straight frames, wrough, framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints etc, all complete.

Taking down shutters : Labour only for taking down door / window shutters exc. 2.0 sqm each and removing the same to store all complete.

Pannel shutter 35 mm thick : S & F 35 mm thick panel shutter, with plain, framed, panel shutter with panels of timber flat on both side (feather edged) of second class hard wood (Bhola / Gamari) & fitted to frames all complete.

PVC door shutter: S & F factory made solid pannel PVC door shutter make rajshri or substantially equivalent make 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rail, ms frame shall be covered with moulded plin colour PVC 'C' channel having of PVC sheet straight of 20mm width stuck inside with solvent cement for stiles and plin colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail; panneling of plain colour 5mm thick PVC sheet to be fitted in ms frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, and fixed in the frame at site all complete.

PVC doors frame : S & F solid PVC door frame make Rajshri or equivalent of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with ms squre tube, in opening and fixed in position all complete.

Tee Hinges :- S&F Mild steel tee hinges 150 mm long, stove enamelled black, medium type, and fixed in wooden doors all complete.

Butt Hinges : S & F 75 mm long butt hinges medium weight cold rolled mild steel and fixed all complete.

Aluminium Tower Bolt 200 mm long : S & F 200 mm long aluminum anodised barrel tower bolts of extruded section and fixed all complete.

Aluminium Tower Bolt 125 mm long : S & F 125 mm long aluminum anodised barrel tower bolts of extruded section and fixed all complete.

Aluminium Handle : S & F 125 mm long extruded anodised aluminium handle fabricated type and fixed all complete

Aluminium Handle : S & F 100 mm long extruded anodised aluminium handle fabricated type and fixed all complete.

Stainless Steel Wire Cloth: S & F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to be fixed in windows all complete.

Hinge Cleat : S & F hinge cleat made of 2nd class hard wood not exc 200 cu. cm. each including supply of 50 mm long butt hinges, medium weight, cold rolled mild steel etc, all complete.

M.S. Small articles : S & F for providing mild steel straps, clamps, hold fasts etc, as small articles,to be fixed in position as required all complete.

Reinforcement : M & L for providing reinforcement work with tmt mild steel bars 08 mm and over, cut to length, bent to shape required, including cranking, bending, hooking ends & binding with mild steel wire (annealed) not less than 0.9 mm dia. etc.all complete.

Pre-colour coated steel sheet: S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick (total coated thickness) of make: TATA Blue scope / Everest / Jindal or substantially equivalent make of any colour having tensile (yield) strength of 550 mpa minimum, coated with aluminium zinc (az 150) @ 150 gm/sqm of coating (total both surfaces) as in roof covering cladding to wall etc. fixed with self tapping screws in every trapezoidal profile. (test certificate of the materials should be submitted by the firm before any payment) all complete.

Pre-colour coated plain steel sheet: S & F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick (total coated thickness) of make: TATA Blue scope / Everest / Jindal or substantially equivalent make of any colour having tensile (yield) strength of 550 mpa minimum, coated with aluminium zinc (az 150) @ 150 gm/sqm of coating (total both surfaces) as in roof clading to wall, ridges etc. fixed with self tapping screws in every trapezoidal profile. (Test certificate of the materials should be submitted by the firm before any payment) all complete.

Dismantling tiles : Labour only for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all complete.

Taking down plastering : Labour only for taking down cement or cement lime plaster of any description, including raking out joints, hacking for key, scrubbing down with water etc. all complete.

Ceiling plastering (1:4) : M & L for rendering 12 mm thick cement plaster 1:4 mix in ceiling or concrete surfaces of any description all complete.

Cement plaster(1:6): M & L for providing 12 mm thick cement plater 1:6 mix on fair faces of brick work or concrete surfaces at any height all complete

Bedding layer (1:4) : M & L for rendering average 20 mm thick cement plaster 1:4 in screed bed over existing concrete surface, brick wall etc. of any description all complete

Non-skid flooring : S & F for providing non skid joint free ceramic floor tiles of size of each tiles not exc 0.18 sqm, 7 to 8mm thickness, of Kajaria , Jhonson, Orient or substantially equivalent make to be set and jointed in neat cement slurry and pointed in colour cement to match all complete

Glazed tiles : S & F for providing glazed ceramic tiles of size 300 x 200 x 7mm Kajaria , Jhonson, Orient or substantially equivalent make on vertical surfaces any position, set and jointed in neat cement slurry and pointed in white cement to match all complete.

White washing wall : M & L for applying two coats of white washing with blue tint on wall surfaces of any description after necessary preparation of old decorated surfaces all complete.

Washable distempering in ceiling : M & L for applying two coats of washable distemper of 1st quality make- Asian / Berger / ICI or substantially equivalent make after necessary preparatory work with primer to distempering in ceiling all complete.

Washable distempering on wall : M & L for applying two coats of washable distemper of 1st quality make- Asian / Berger / ICI or substantially equivalent make after necessary preparatory work with primer to distempering of wall all complete

Exterior surface painting : M & L for applying Two or more coats of 100% Premium acrylic emulsion paint having with [make: of 1st quality of Asian/Berger/ICI or substantially equivalent] VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm after necessary preparation of surface all complete.

Sheet Glass : S & F for providing 3 mm thick sheet glass, ordinary qiality tinted or plane as required and glazing with oil putty in squares not exc. 0.5 sqm. in each pane all complete.

Wood painting : M & L for applying two coats of synthetic enamel paint finished glossy of approved make and shade over a coat of primer after necessary preparation of new wood surfaces of any description over 10 cm width or girth all complete.

Steel painting two coat: M & L for applying two coats of synthetic enamel paint finished glossy of 1st quality; Make: Asian / Berger / ICI or substantially equivalent make, over a coat of priming with red lead primer after necessary preparation of new decorated steel surfaces of any description over 10 cm width or girth all complete

Urinal half stall type : S & F Vitreous China urinals, half stall type (flat back for walls), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and union for discharge pipe with waste coupling 32 mm dia minimum weight 45 gms PTMT including waste pipe 32 mm dia, with PVC connections 15 mm dia with PTMT nuts 450mm long along with 15 mm dia Push tap any colour high pressure of PTMT screwed for iron pipe and fixed, (Minimum weight 15mm-50 gms)suitable for urinals all complete.

Push Taps : S & F of 15mm Push tap any colour, high pressure of PTMT , (Minimum weight 15mm-47 gms) → fixed in position, all complete

Bib taps : S & F Bib taps of PTMT, any colour high pressure screwed for pipe or for brass ferrule(Minimum weight 15mm-90gms) and fixed, size of tap 15 mm bore dia. all complete.

Commode : S & F for providing vitreous china water closet pan, wash down, padestal pattern (commode), white, including 'p' or 's' trap. Make: Hindware / Neycer / Parryware or substantially equivalent , after taking out old w/c, all complete.

Commode seat cover: S & F plastic water closet seat, black,closed pattern with flat bottom ,and cover and mild steel chromium plated or aluminised hinging device,all complete.

Flushing cistern: S & F of P.V.C valveless syphonic action type, flushing cistern Make: Hindware / Neycer / Parryware or substantially equivalent 10 ltrs. capacity, low level, white with inlet, ball valve, float and handle including flush pipe of polythene of low or high density or PVC tube 32 mm dia. for low level cistern and brackets with PVC connections 15 mm size with PTMT nuts of length 450mm long with cast copper alloy fancy type 15mm bore dia. chromium plated gate valve for fixed in position, (after taking out old/existing flushing cistern if any of any description ) all complete.

Towel Rail : S & F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats(Minimum weight 190gms) fixed in position all complete.

PVC pipe 20 mm dia : S & F of 20 mm bore dia low density polythylene pipes (LDPE) of pressure rating 6 kgf/sqcm laid or fixed in proper position all complete.

PVC pipe 15 mm dia : S & F of 15 mm bore dia low density polythylene pipes (LDPE) of pressure rating 6 kgf/sqcm laid or fixed in proper position all complete.

PVC pipe : S & F 110mm dia. bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in wall, trenches or in floors all complete.

PVC bends : S & F 110mm dia. PVC (SWR) bends any radius to be fixed in position all complete.

PVC 'T' junction : S & F 110mm dia. PVC (SWR) 'T' junction, equal or unequal to fixed in position all complete.

PVC 'Y' junction : S & F 110mm dia. PVC (SWR) single 'Y' junction, equal or unequal to fixed in position all complete.

Dismantling of brick work: Dismantling brick work or stone/boulder masonry of any type built in cement morter including all quoins, arches, pillars etc all complete.

Dismantling CGI sheet roofing : Dismantling of CGI Sheets (corrugated, semi-corrugated etc.) sheets, any thickness, size in roof covering and including stacking and removal to store all complete.

Water proofing treatment: S & F of polymeric bituminous water proofing membrane of 2 mm thick (approx.) of wt. 2.25 kg./ sqm to be laid over ( after applying) one layer of blown bitumen on existing surface after necessary preparetory work and then another layer of blown bitumen to be applied over the newly laid water proofing membrane ( bitumen Grade for both the layers should be 30/40 and total quantity of bitumen on both layers should be minimum @ 2.4 kg / sqm ) all complete. [The firm has to submit warranty of Four Years ( from the date of completion) in respect of this item @ 2% of the value of this item in the form of Bank guarantee/TDR before claiming final payment . In case of any leakage through the roof area done by this item, firm has to rectify the same within 7 days otherwise the same will be forfeited.]

Taking out damaged old Tarfelt: Labour only for taking out existing old damaged tarfelt from the roof surface and cleared the same from work site to place nearby ground area all complete.

Taking down, repairing & re-fixing of shutters : Labour only for taking down steel window frame with shutter exceeding 2 sqm each and re-fixing it after necessary cutting & sizing, easing and adjusting or changing any dismantled portion etc. of frame .

Credit materials :- (a) Old steel scrap (CGI, PGI sheets/ CI RW Pipes / bends / shoes & Steel gutter, steel angle, Flat etc). (deviation + 25% ).

Removal of old wiring: Taking down carefully by unscrewing from boards / outlets boxes, fittings and fixtures such as switch socket, ceiling roses, lamp holders, brackets, ceiling fittings, regulators, related wiring, etc. and carrying to specified area.

Ceilling fan regulator: Supply and fixing and connecting completed of Anchor / Rider / SSK / Pritam or substantially equivalent make 230VAC step type electronic fan regulator flush type on existing laminated sheet single way.

40A SP MCB/Isolator: Supply and fixing and connecting completed of Siemens / Legrand / Havells / Schneider or substantially equivalent make SP MCB / Isolator, upto 40A, 230V.

63A Four Pole MCB:Supply and fixing and connecting completed of Siemens / Legrand / L&T / Schneider or substantially equivalent make Four Pole MCB / Isolator, upto 63A, 415V.

M & L for point wiring of one light point or one plug point or one fan point controlled by one switch with Finolex / Havells / HPL / Polycab or substantially equivalent make PVC insulated multistrand copper conductor of 1.5 sqmm in PVC casing caping with same make insulated 1 sq mm copper earth wire.

Same board point wiring: M & L for point wiring of one 3 pin plug point 5 amps on the same board with other switches with 1.5 sqmm FR type Finolex / Havells / Polycap or substantially equivalent make PVC insulated mutistrand copper wire alongwith same make 1 sq mm copper earth wire.

Ceiling rose: Supply, fixing and connecting completed Anchor / Rider / Havells / V-Guard or substantially equivalent make celling rose of PVC/polycarbonate isolated body suitable for 230VAC supply.

6A piano switch: Supply and fixing and connecting completed of Anchor / SSK / Standard or substantially equivalent make 6 Amps piano switch flush type, single pole one way.

16A piano switch: Supply and fixing and connecting completed of Anchor / SSK / Standard or substantially equivalent make 16 Amps piano switch flush type, single pole one way.

6A socket outlet: Supply and fixing and connecting completed of Anchor / SSK / Standard or substantially equivalent make 6 Amps socket oulet flush type, 3 pin.

16A socket outlet: Supply and fixing and connecting completed of Anchor / SSK / Standard or substantially equivalent make 16 Amps socket oulet flush type, 3 pin.

2.5 sqmm Cu sub main: Supply and fixing of FR type Finolex / Havells / Polycap or substantially equivalent make 2 x (2.5 sq mm single core multistrand PVC insulated copper wire) alongwith same make 1 x (2.5 sq mm single core multistrand copper earth wire) alongwith PVC casing caping for sub main.

G.I. pipe earthing: M & L for earthing complete with medium class G.I. pipe electrode 40 MM dia. 2.5 meters length, buried directly and preferably vertically in ground with top edge not less than 1.25 meters below ground level connected earthing lead by using 25x4 mm galvanised iron strip upto the test point and making of pit as shown in plate-2.

Supply and fixing & connecting complete PVC rectangular box of suitable thickness and size 200X100X50 mm with bakelite top cover 3mm thickness.

Supply and fixing & connecting complete PVC rectangular box of suitable thickness and size 150X100X50 mm with bakelite top cover 3mm thickness.

M / Labour for cable end terminal joints any type complete suitable for PVC insulated 4 core armoured aluminium conductor cable upto 35 sq. mm size.