Providing and fitting of New service and emergency gate leaf with main roller assly, rubber seals, flats by dismentled existing old etc. in H.R well and other misc repairing work of Dantiwada Irri. Project.

specification and reference to book of Quantity Unit Rate in Rs. Amount in Rs.

specifications)

1 Dismantling of existing and Providing, 2.00 GATE 2357787.00

fabricating & erecting of emergency gate

assly. size 2590 x2620 mm with main

roller assly. Ø350 mmX 120 mm -4 no's

& Guide Shoe - 4 no's with top, side &

bottom rubber seal with seal bar & base,

S.S nut bolt for seal fixing etc. complete

for HR. emergency Gate including cost

of material, labour, gas cutting,

Fabrication, tools & tackle scaffolding,

painting as per Instruction of Engineer

Incharge and drawings and

specifications of Dantiwada Irrigation

2 Dismantling of existing and Providing, 2.00 GATE 2401564.00

fabricating & erecting of service gate

assly. size 2515 x 2896 mm with main

roller assly. Ø350 mmX 120 mm -4 no's

& Guide Shoe - 4 no's with top, side &

bottom rubber seal with seal bar & base,

S.S nut bolt for seal fixing etc. complete

for HR. Service Gate including cost of

material, labour, gas cutting, Fabrication,

tools & tackle scaffolding, painting as per

Instruction of Engineer Incharge and

drawings and specifications of

Dantiwada Irrigation Project.

3 Providing, loading, transportation, 4.00 Nos 1085750.00

packaging, insurance, unloading,

handling, installation and testing of new

Hydraulic cylinder (14 MT capacity)

along with its accessories i.e. motor,

pump, housing arrangement, electrical

panel, cable, all types of valves, manifold

block, pressure gauge etc.complete as

per drawing , specification and direction

of engineer in charge for HR gates of

Dantiwada Irri. Project.

Schedule-B Bill of Quantity.xlsx

Description of Item (with brief

specification and reference to book of Quantity Unit Rate in Rs. Amount in Rs.

specifications)

4 Providing Certified Commercial Diving 2.00 Job 1381680.00

Services with Complete Apparatus for

Stop-Log Gate Leakage Arrestation,

Surface Preparation by Pneumatic

Chipping and Thermal/Oxyfuel Cutting,

and Hyperbaric Shielded Metal Arc

Welding (SMAW) Repairs Structures,

Including Mobilization, Demobilization,

Transportation complete as per direction

of engineer in charge for HR gates of

Dantiwada Irri. Project.

Total Amount Rs.

Total Amount Rs.

Special Conditions

After completing this entire work, the hydraulic regulator gates at Dantiwada Dam will have

to be operated and maintained by agency for three years.

Payment of 10% of the entire work will be made after completion of the operation and

maintenance period.

Executive Engineer

Deesa Irrigation Division

Schedule-B Bill of Quantity.xlsx