C/O of Residential accommodations for staff of Govt. Degree College at Dharampur in Tehsil in Dharampur Distt Mandi (H.P)

Amount

Excavation in hilly areas in all heights and depths and in all kinds of soil by manual/mechanical means including saturated soil comprising of and alldinary soil, soft rocks, hard rocks, chiseling/wedging out of rock (where blasting is prohibited) and other intermediate classification of soil, setting out true to the required lines, grades width cutting and trimming of side slopes and level as shown in the drawing and as directed by the Engineer-in-Charge at site according to the MORD technical specification clause 1603.1, 1603.2 and sorting out useful materials and stacking the same in all leads and lifts in acquired width of the road and transportation of un-useful material for filling in road ways, camber, embankments for grade improvements and disposal of all surplus un-useful material to acquired width of the road and all on approved dumping sites through all modes of transportation including head load and all animals transport and all mechanical means alongwith its levelling fine dressing and carriage of machineries, materials, tools equipments and safety measures and other incidentals necessary to complete the work by mechanical means and/or labour if required. Any loss to the public/private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases as per direction of the Engineer-in-Charge including carriage of material within all leads and lifts. . The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Excavation in foundation, trenches etcetera in all classification of soil such as pick work, jumper work, blasting work soft rock and hard rock including chiselling wedging and any other mixed variety in dry and all saturated conditions upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable materials separately as directed and then returning the stacked soil in fifteen centimeters layers when required into plinth and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus un-serviceable excavated earth within all leads and lifts as per directed by the Engineer-in-Charge including entire carriage of material within all leads and lifts, disposed materials to be neatly dressed and levelled including other incidentals. The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frame of 30x30x5mm (Thirty into thirty into five millimetre) size so as to give a fair finish including centring, shuttering, strutting and propping and centring etc etera with wooden battens and ballies in all heights of propping and centring below supporting floor to ceiling not exceeding 4 (four) meters and removal of the same for insitu-reinforced concrete and plain concrete work upto all floor level in all heights including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST and all other taxes imposed by the Government.

In foundation,footings, bases of columns, etcetera for mass concrete.

In flat surfaces such as soffits of suspended floors, roofs, landings, balconies and access plateform and the like floor upto any thickness upto all floor levels.

In columns, pillars,piers, abutments posts and struts square rectangular and all polygonal in plan.

In beams, plinth beams, cantilevers, girders and lintels, sides and soffits of beams, beams haunching cantilevers bressumers and lintels in all depth /height not exceeding 1 (one) metre depths upto all floor levels

Stairs Cases with sloping and all stepped soffits excluding landing except spiral stair cases upto all floor level.

Vertical surfaces such as walls (any thickness) partition and the like including attached pillasters, buttresses, plinth and string courses etcetera and the like in all floor heights.

In edges of slabs and breaks in floors and walls under any width/ height upto all floor level.

Small Lintels not exceeding 1.5 mtrs (One point fiveMeter) clear span, mouldings as in cornices window sills, spring courses, bands, copings, bed plates, anchor blocks and the like.

Providing and laying mechanically mixed 1:5:10 (one cement :five coarse sand : ten graded stone aggregate) 40 mm(forty millimetres) nominal size cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string and all lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etcetera., up to all floor level, excluding the cost of centering, shuttering and finishing in all respect including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and laying mechanically mixed cement concrete 1:6:12 (One cement: six sand:Twelve graded/crushed stone aggregate 40mm (Forty millimetre) nominal size) as per specification and curing complete but excluding cost of centering and shuttering in foundation and plinth including all heights/depths including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and laying mechanically mixed cement concrete M-10 with graded/crushed stone aggregate 20mm (Twenty millimetre) nominal size as per specification and curing complete including all heights/depths but excluding cost of centering and shuttering all work upto plinth level form work in foundation and plinth including all heights/depths including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and laying mechanically mixed cement concrete 1:4:8 (One cement: four sand: eight graded/crushed stone aggregate 40mm (Forty millimetre) nominal size) as per specification and curing complete including all heights/depths but excluding cost of centering and shuttering all work upto plinth level form work in foundation and plinth including all heights/depths including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and laying mechanically miexd and vibrated in position M-20 (M-Twenty) grade of reinforced cement concrete to obtain the minimum crushing strength of 20n/m2 ( Twenty Newton per milimiter square with minimun cement 380kg per cubic metre (three hundred eighty kilogramme per cubic metre) graded stone aggregate 20 mm (twenty millimetres) nominal size) all work up to plinth level excluding the cost of centering, shuttering, finishing and reinforcement including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and laying mechanically miexd and vibrated in position specified grade of M-20 (M-Twenty) cement concrete to to obtain the minimum crushing strength of 20n/m2 ( Twenty Newton per milimiter square) with minimun cement 380kg per cubic metre (three hundred eighty kilogramme per cubic metre) graded stone aggregate 20 mm (twenty millimetres) nominal size) all work up to plinth level excluding the cost of centering, shuttering, including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST and allother taxes imposed by the Government.

Providing and laying Reinforced cement concrete M-25 (M-Twenty five) design mix gradred stone aggregate 20mm (Twenty millimetre) nominal size and cement contrete not less then 400kg/cum (Four hundred killogram per cubeic metre) to obtain the minumum crusing strength 25n/m2 ( Twenty Five Newton per millimeter square machine batched and machine mixed and vibrated in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etcetera. above plinth to all floor levels including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and laying Reinforced cement concrete machine batched and machine mixed and vibrated in reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° (fifteen) Degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to all floor level, excluding the cost of centering, shuttering, finishing and reinforcement above plinth to all floor levels including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and fixing up to all floor level precast cement concrete M-25 (M-Twenty five) design mix gradred stone aggregate 20mm (Twenty millimetre) nominal size and cement contrete not less then 400kg/cum (Four hundred killogram per cubeic metre) to obtain the minumum crusing strength 25n/m2 ( Twenty Five Newton per millimeter square graded stone aggregate 20mm nominal size) string and all lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etcetera, including hoisting and setting in position with cement mortar 1:3 (one Cement : three coarse sand), cost of required Centering complete including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing, hoisting and fixing above plinth level up to all floor level precast reinforced cement concrete in mouldings as in cornices, windows sills etcetra, including setting in cement mortar 1:3 (one cement : three coarse sand) cost of required centering, shuttering but, excluding the cost of reinforcement, with M-25 (M-Twenty Five) grad design mix graded stone aggregate 20 mm (twenty millimetre nominal size) to obtain the minumum crusing strength 25n/m2 ( Twenty Five Newton per millimeter square with cement concrete not less then 400 kg/cum (Four hundred killogram per cubeic metre) including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and laying Mild steel and Medium Tensile steel bars Fe 500D made of SAIL,TISCO, TATA, JINDAL, RINL, PANTHER & (JSPL) Shyam steel for reinforced cement concrete work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and above plinth level upto all floor levels including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed and vibrated design mix M-25 ( M-twenty five) grade cement concrete for reinforced cement concrete work,to obtained minium crushing strength of 25N/mm2 (Twenty five ) Netwon per millimetres square) with minium cement contents of 400Kg/Cum (Four hundred killogramme per Cubic metres) using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST and all other taxes imposed by the Government.

All works upto plinth level.

All works above plinth level upto all floor level.

Providing weep holes in brick masonry/stone masonry, plain reinforced concrete abutment, wing walls, return walls,retaing walls and Breast walls with 100mm (One hundred millimeter) diameter PVC Pipe made of D-plast finolex having working pressure not less than 4.50 Kg P/Sq cm (four point five Killogramme per Square centimetres) extending through the full width of structures with slope of 1 one (Vertical) : 20 ( Twenty) (Horizontal) towards drawing face complete as per drawing and technical specifications clauses 614, 709, 1204.3.7 including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Stone filling /Soling under floors tightly hand packed upto all floor levels in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GSTand all other taxes imposed by the Government.

Random rubble masonry (uncoursed/brought to courses) with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (one cement :six sand : Twelve graded stone aggregate 20 mm (Twenty) Millimetres nominal size) with Cement Mortar 1:6( One cement: Six course sand) and curing complete including entire carriage of material within all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Govt.

Supplying and Filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Filling with brick agreegate in soak pit with consolidating and dressing complete including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and laying damp proof course 40mm (Forty milimetres ) thick with cement concrete 1:2:4 ( One cement : two sand : four graded stone agregate 12.5mm ( Twelve decimal five milimetres ) nominal size curing complete including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and Applying a coat of residual petroleum bitumen of grade of VG-10 (VG-ten) of approved quality using 1.7kg/sqm (One point seven) Kilogramme per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing under layer for plinth protection of 75 mm (Seventy five millimeters) thick (unconsolidated) bed dry brick/stone aggregate 40mm (Forty millimeters) nominal size with well rammed and consolidated and grouted with fine sand including preparation of ground complete in all respect upto all floor levels in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Making plinth protection 50mm (fifty millimeter) thick in cement concrete 1:3:6 (one cement : three sand (zone - III) : six graded stone aggregate 20mm (twenty millimeter) nominal size) over 75 mm(seventy five millimetres) thick bed of dry brick bllast 40 mm(forty millimetres) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling and derssing and finishing the top smooth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and laying Precast concrete hollow block masonry in partition walls 15 cm.(fifteen) centimetres thick with hollow block of approved size including quion blocks, jamb blocks, closer etcetra. made of cement concrete 1:3:6 (one cement: three sand: six graded stone aggregate 20mm (Twenty) millimetres nominal size laid with cement mortor 1:6( One cement into six sand) and curing complete upto all floor levels in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and laying Precast concrete solid block masonry in partition walls 10 cm.(Ten) centimetres thick with solid block of approved size including quion blocks, jamb blocks, closer etcetera made of cement concrete 1:3:6 (one cement: three sand: six graded stone aggregate 20mm (Twenty) millimetres nominal size laid with cement mortor 1:4( One cement into four sand) and curing complete upto all floor levels in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5( seven point five) insuper structure above plinth level upto all floor level in cement mortar 1:6 (one cement : six course sand) curing complete including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in superstructure above plinth level up to all floor levels in Cement Mortar 1:3( One cement: three sand) and curing complete including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and fixing 20mm (Twenty millimetre) nominal dia chromium plated brass curtain rod having wall thickness of 1.25mm (One point two five) millimetres with two chromium plated brass brackets fixed with C.P. Brass screws and PVC sleeves etcetera, upto all floor levels in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and fixing M.S grills of required pattern in frames of windows etcetera with M.S falts, square or round bars etcetera including primeing coat with approved steel primer all complete fixed to steel windows by welding including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing 40x3 (Forty into three millimetres) flat iron hold fast 40(Forty) centimetres Long including fixing to frame with 10(Ten) millimetres diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15 ( Thirty into ten into fifteen) centimetres. 1:3:6 ( one cement : three sand: six graded/crushed stone aggregate 20(twenty millimetres) nominal size including entire carriage of material within all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Govt.

Providing and fixing 300×16mm (Three hundred into sixteen millimetre) nominal size aaluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10(ten) as per IS : 1868), transparent and all dyed to required colour and all shade, with nuts and screws etcetera complete upto all floor levels in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. TThe rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10(ten) as per IS : 1868 ) transparent and all dyed to required colour and all shade, with necessary screws etcetera complete upto all floor levels in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST and all other taxes imposed by the Government.

250x10mm (Two hundred fifty into ten millimetres)

150x10mm (one hundred fifty into ten millimetres)

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868) transparent and all dyed to required colour and all shade, with ecessary screws etc aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10(ten) as per IS : 1868) transparent and all dyed to required colour and all shade, with necessary screws etc upto all floor levels in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST and all other taxes imposed by the Government.

125mm (one hundred twenty five millimetres)

100 mm (one hundred millimetres)

Providing and fixing aluminium hanging type floor door stopper, ISI marked, anodised Twin rubber stopper (anodic coating not less than grade AC 10 (ten) as per IS : 1868) transparent and all dyed to required colour and shade, with necessary screws etcetera complete. upto all floor levels in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and fixing 65 x35 mm ( sixty five into thirty five millimetres ) special quality chromium brass cup board lock with six leavers with necessary screws etcetera complete upto all floor levels in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

Providing and fixing 150 (One hundred fifty) millimetres M.S. bright finsihed hard drawn hooks eyes brass including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals.The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and fixing 150 mm ( one hundred fifty millimetres ) oxidized M.S. double acting spring hinges with necessary screws etcetera complete upto all floor levels in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST and all other taxes imposed by the Government.

35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineer-in-charge including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals.The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and fixing 19mm thick ( ninteenmilimetre) made of action teasa thick terramite resistant water proof commercial board box including shelves and shutters, the back side of cupboard/cabinet of 8mm(Eight milimetre) thick ply and cut portions of shelves shall be finished with 6mm six milimetres) hard board edging. The cut portion of shutters from all the sides shall be finished with 12 mm thick hard wood edging. the shutters from out side shall be finished with 1mm thick laminated of approved shade includng piano hinges and magnetic catcher with all ascessories as per detail architectural drawing No. 195/1 to 199/1 including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and fixing 19(Ninteen) millimetres thick termite resistant water proof Commercial Board shutters with hard wood edging and confirming to IS- No.1659 of NOVAPAN , ARCHIDPLY, ACTION TESA,GREEN,NATIONAL,KITPLY make shutters i/c fixing with nickel plated piano hinges with screws etc and PGI sheet linning inside complete upto all floor levels in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Structural steel work riveted, bolted and all welded in built up sections,, made of Tata, Jindal, trusses and trusses, in pertions in building framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Steel work welded in built up sections, made of Tata Jindal, in framed work steel in beams joints, chanal angle tee,flat guard bars, flats with connecting plates and all angle cleats as in main and cross beams,hip and jack rafters, Ladders, railings , Brackets and Similar work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint upto all floor level in all heights complete upto all floor levels in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

Providing and fixing M.S. fan clamp type I and all II of 16 mm ( One and all two of sixteen) millimetres dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs and all beams during laying, including painting the exposed portion of loop, all as per standard design complete including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and fixing M.S channels door, windows frames manufactured from M.S section ISMC 75 X40 MM & ms. Flat 75x5 mm as per direction of Engineer-in -charge and drawing including hinges jambs bead and if required angle threshold M.S. Angle 50x25 mm welded and all rigidly fixed by mechanical means with split end tails to each jamb including steel butt hinges 25 mm and provision of lacking arranement and shock observer as specified and applying a coat of approved steel primer after pretreatment of surface including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and fixing M.S channels door, windows frames manufactured from M.S section ISMC 75 X40 MM & ms. Flat 75x5 mm in combination welded together and standard window shutter having style of Z-section with T-section of 25x25x3mm and angle iron 25x15x3mm as per drawing complete with fitting and necessary screws and applying a priming coat with red lead paint complete as per approved specification/design. including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Side hunge

Fixed

Top hunge

Providing and fixing steel wire gauge shutter in Z-section using galvanised M.S wire gauge of I.S. gauge designation 85g with wire of dia 0.56mm for doors, windows and clerestory windows with metal beading of approved quality and shape -section with necessary screws and applying a coat of primer with red lead paint complete as per approved design including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and fixing 40mm thick (forty millimetre) wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85g. With wire of dia 0.56mm for doors, windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws. including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Precast terrazo tiles 22 mm (twenty two milimetre) thick with graded marble chips of size upto 12 mm (twalve milimetre), laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm (twenty milimetre) thick bed of cement mortar 1:4 (one cement:four coarse sand) iight shade pigment using white cement including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Extra if terrazo tiles are laid in treads of steps not excedding 30 cm (thirty centimetre) in width.including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Precast terrazo tiles 22 mm (twenty two milimetre) thick with graded marble chips of sizes upto 12 mm,(twalve milimetre) in skirting and risers of steps not exceeding 30 cm (thirty centimetre) in height, on 12 mm thick cement plaster 1:3 (one cement : three coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of light shade pigment using white cement including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Marble stone flooring with Udaipur Green Marble 18 mm thick eighteen milimetre) marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (one cement : four coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Kota stone slab flooring 25mm thick (twenty five milimetre) over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (one cement : four coarse sand) including rubbing and polishing complete including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government.

White glazed tiles 6 mm thick (six milimetre) in skirting risers of steps and dado12 mm (twalve milimetre) thick cement mortar 1:3 (one cement :three sand) and jointed with cement slurry including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and Laying 8mm (eight milimetre) Thick Anti Skid Ceramic tile 300 x 300 mm (three hundred into three hundred milimetre) in flooring base of cement 12 mm (twalve milimetre) thick cement mortar 1:3 (one cement :three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and Laying 8mm (eight milimetre) Thick (eight milimetre) Anti Skid Ceramic tile 300 x 300 mm (three hundred into three hundred milimetre) in Skirting base of cement 12 mm (twalve milimetre) thick cement mortar 1:3 (one cement :three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and fixing 0.60mm ( Zero point sixty millimeter) thick pre-painted steel sheet of TATA/ /DUROSHINE in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) and allganic coating of 20 ( Twenty ) micron over 5 ( Five ) miocrons primer coating to back coat of polyster of 5 ( Five ) microns over 5 ( Five) microns primer coating including fixing with pre-painted iron J and all L hooks, bolts and nuts , 6mm diametre with prepainted limpet and rubber washers complete with all accessories as required including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and fixing ridges and all hips 90cm. (Ninety centimetres) overall with 0.60mm (Zero point sixty millimeter) thick prepainted steel sheets TATA/ /DUROSHINE in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyester and allganic coating of 20 (Twenty ) microns over 5 ( Five ) micron primer coating + back coat of polyster of 5 ( Five) microns over 5 micro primer coating including fixing with prepainted iron, J and all L hooks bolts and nuts ,6mm(Six milimetre) diametre and prepainted G.I limpet and bitumen washer complete with all accessories as required including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and fixing valley 60 cm (sixty centimetre) overall 0.60 mm (sixty milimetre) thick prepainted steel sheet in roofing with hot dipped mettalic zinc coated sheet with top coat of regular modified polyster and allganic coating of back coat of polyster 5 microns over 5 microns primer coating including fixing with screws prepainted iron J and all L hooks, bolts and nuts 6mm (six milimetre) dia meter with prepainted GI limpet and bitumen washers complete with all accesories as required as per the direction of Engineer-in-charge including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and fixing flushing 38cm (thirty eight centimetre) overall with 0.60mm (sixty centimetre) thick prepainted steel sheet in roofing with dipped metallic zinc coated sheet with top coat of regular modified polyster and allganic coating of 2o microns( twenty micrins) over 5 microns (five micrins) primer coating Plus back coat of polyster of 5 microns (five micrins) over 5 microns (five micrins) primer coating icluding fixing with screws prepainted iron J and all L hooks, bolts and nuts 6mm diametre with prepainted GI limpet and bitumen washers complete with all accesoriees as required as per the direction of Engineer-In-Charge including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government. .

Providing and fixing 30 cm. (thirty centimetre) wide & 30 cms (thirty centimetre) deep minimum semicircular plain G.I. sheet gutter over angle /T angle frame work with iron bracket 40x3mm (forty into three milimetre) size bolts and nuts and washers etcetera including making necessary conections with rain water pipe complete as per design. 0.80 mm (eighty milimetre) thick with zinc coating not less than 275 gm/m2 including (two hundred seventy five gramme per square metre) entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government. .

Providing and fixing M.S B.P sheet 1.66 mm to 2 mm ( One point sixty six millimeter to two millimeter) thick in eaves board/facia/soffits/ceiling including cutting , fixing and welding to steel roof members and applying a coat of red lead primer complete as per the direction of the Engineer-in-Charge (base member of steel work shall be measured and paid for separately) including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government. .

Providing and fixing 8mm (eight milimetre) thick cement bounded particle board ceiling of approved quality (frame work and cover fillets to be paid for separately.) including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government. .

Providing and fixing 6mm thick (six milimetre) cement bounded particle board ceiling of approved quality (frame work and cover fillets to be paid for separately.) including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government. .

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm (fifteen centimetre) diameter and weighing not less than 440 grams (four hundred forty gramme) .including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government. .

Providing and fixing 110 mm (one hundred ten milimetre) on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten milimetre) gap for thermal expansion, (i) Single socketed pipes.including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government. .

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten milimetre) gap for thermal expansion.

110 mm (one hundred ten milimetre) plain bend

110mm (one hundred ten milimetre) dia P.V.C. shoe

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm (fifty into fifty into fifty milimetre) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (one cement : four coarse sand) and making good the wall etcetera complete. 110 mm (one hundred ten) dia including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government.

15 mm (fifteen milimetre) cement plaster on the rough side of single and all half brick wall of mix 1:6 (one cement : six fine sand) including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government.

15 mm (fifteen milimetre) cement plaster on the fair side of single and all half brick wall of mix 1:6 (one cement : six fine sand) including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government.

20 mm (twenty milimetre)cement plaster on the rough side of single and all half brick wall of mix 1:3 (one cement : three fine sand) including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government.

6 mm (six milimetre)cement plaster of mix: 1:3 (one cement : three fine sand) including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Pointing Flush/ Ruled pointing on stone work with cement mortar 1:3 (one cement : three fine sand) including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two and all more coats) over and including water thinnable priming coat with cement primer including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Finishing walls with 100% (one hundred precent)Premium acrylic emulsion paint having VOC less than 50 gm/litre (fifty gramme per litter) and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives (New work (Two and all more coats applied @ 1.43 litre/ 10 sqm. (one point forty three liter per ten square metre)over and incouding priming coat of exterior primer applied @ 0.90 litre/ 10 sqm.(zero point ninty liter per ten square metre)including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and applying white cement based putty of average thickness 1 mm, (one milimetre)of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Painting with oil type wood presservative of approved brand and manufacture: (Old work (one and all more coats) including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two and all more coat applied @ 0.90 ltr/10 sqm. Over an under coat of primer applied @ 0.75 ltr/ 10 sqm. Of approved brand and manufacture including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two and all more coat applied @ 0.90 ltr/ 10 sqm (zero point ninty liter per ten square metre) over an under coat of primer applied @ 0.80 ltr/ 10 sqm (zero point eighty liter per ten square metre) of approved brand and manufacture including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and fixing MS railing for stair case having balluster of 19mm x19mm (ninteen into ninteen milimetre) square bar with a clear height of 85cm (eighty five centimetre) embedded in cement concrete steps and jointed with electrical/gas welding at top along with MS flat of 40mmx6mm size complete with a applying priming coat of red lead paint including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and fixing 75mmx65mm (seventy five into sixty five milimetre) with M.S. flat 40x6mm (forty into six milimetre) welded to the balluster rounded hand rails in straight lenth complete in hard wood hand rail including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and fixing moulded hand rail of M.S. hollow pipe 50mm (fifty milimetre) dia welded in straight lenght over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S. flat & balusters of railings shall be mesaured & paid separetely.including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and laying water proofing treatment, by applying cement slurry mixed with water proofing cement compound of Dr.Fixit Padfin and all equivalent consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm. (zero point four hundred eighty eight kilograme per square metre) Mixed with water proofing cement compound @ 0.253 kg/sqm.(zero point two hundred fifty three kilograme per square metre) This layer will be allowed to air cure for 4 hour. (b) Second layer of slurry of cement @ 0.242 kg/sqm(zero point two hundred forty two kilograme per square metre) mixed with water proofing cement compound @ 0.126 kg/sqm (zero point one hundred twenty six kilograme per square metre).This layer will be allowed to air cure for 4 hours (four hours) followed with water curing for 48 hours. (forty eight hours) The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Constructing Coursed rubble hammer dressed 'U' shape open surface drain with side wall. 15 X 23 cm (Fifteen into twenty three centimeter ) in cement mortar 1:6 ( One Cement : Six approved Sand) and inside plastering with cement mortar 1:3 (One Cement: Three approved Sand) including earth work and laying 10 cm (Ten Centimatre ) cement concrete in 1:5:10 (One Cement : Five approved Sand : Ten graded crushed stone aggregate) of 40 mm (Forty millimetres) nominal size and 7.5 cm (seven Point Five Centimatre ) cement concrete 1:2:4 (One Cement : Two approved Sand : Four graded crushed stone aggregate of 20 mm (Twenty millimetre) nominal size) and finished with a floating coat of neat cement complete as per standard design.including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and fixing Glass Reinforced Concrete ((G.R.C) Screens in approved size, pattern, design, thickness and color and all M/S Unistone make and all equivalent. The Screens should be made from '53 (fifty three) grade' White Portland cement manufactured by 'JK Cement' and all equivalent. Quartz. Fine Silica Sand, Alkai Resistant Glass Fiber manufactured by Saint Gobain' and all equivalent. Super Plasticizers manufactured by BASF and all equivalent. Polymers manufactured by BASF and all equivalent and U.V resistant Synthetic inorganic pigments should be used for pigmentation manufactured by BAYFERROX (Germany) and all equivalent. The material casting should take place in Synthetic Rubber/FRP Mould manufactured by 'Reckli' and all equivalent. The fixing of Screens should be 'Dry fixing' i.e. to be done with Stainless Steel (SS- 304) 'L' shaped Clamps, dash fasteners and pins including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and fixing panelled shutter for door panel filled with 12mm thick preliminated board phenol bonded particle board ISI marked IS No. 12823 of approved shade style 40mm thick finished side and top rail 200x40mm midde rail 150x40mm complete including below enamelled iron bolt hinges with necessary screws all respect as per the speafication including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and fixing panelled shutter for door panel filled with 12mm thick preliminated board water proof phenol bonded particle board ISI marked IS No. 12823 of approved shade 1mm (one millimetre) thick aluminium sheet upto a height of 1 mtr. style 40mm thick finished side and top rail 200x40mm midde rail 150x40mm complete below enamelled iron bolt hinges with necessary screw in all respect as per the specification including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and Fixing G.I. pipes complete with G.I. fittings including trenching and refilling etcetera of B.S.T/ JINDAL(HISSAR)/ TATA STEEL TUBES LTD /PRAKASH SURYA tube and fittings upto all floor levels in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

20mm (Twenty ) millimetres dia nominal bore

32mm (Thirty two) millimetres dia nominal bore

15mm ( Fifteen ) millimetres dia nominal bore

Providing and Making connection of G.I distribution branch with G.I main 25 to 40mm nominal bore (twenty five to forty) millimetres by providing and fixing tee including cutting and threading the pipe etceteracomplete upto all floor levels in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government..

Fixing water meter and stop cock in G.I. pipe line of KINGSTON /PARKO / TECHNO, JAL, JAQUAR / GE M/ ESS ESS / SEIKO make including cutting and threading the pipe and making long screws etcetera complete (cost of water meter and stop cock to be paid separately).upto all floor levels in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government..

Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes make of Kitech conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, (eighty degree centigrate) Concealed work, including cutting chases and making good the wall etcetera including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etcetera, with clamps at 1.00 mtr(one point zero zero metre) spacing. This includes the costs of cutting chases and including testing of joints complete upto all floor levels in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government..

2532(32 mm OD) (two thousand five hundred thirty two( Thirty two millimertes outer dia)pipe

2025(25 mm OD) (two thousand twenty five( Twenty five millimertes outer dia)pipe

1620(20 mm OD) (one thousand six hundred twenty( Twenty millimertes outer dia)pipe

1216(16 mm OD) (One thousand two hundred sixteen)( sixteen millimertes outer dia)pipe

Providing and fixing White Vitreous china and allissa pattern W.C. pan of size 580x440 mm (five hundred eighty into four hundred forty millimetrers) withintegral type foot rests water closet squatting pan (Indian type W.C. pan ) of Parryware, Hindware, Sanitaryware, Neycer, Cera. make with 100 mm (one hundred millimetrers) sand cast Iron P and all S trap, 10 (ten) Litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever equired upto all floor levels in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal type water closet (European type) No.20011 with seat and lid, 10 (ten) litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm (forty millimetres) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required WC pans with ISI Marked white solid plastic seat and lid of Parryware, Hindware, Sanitaryware, Neycer, Cera. make upto all floor levels in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

Providing and fixing wash basin with C.I brackets, 15mm (fifteen millimeter) C.P C.P brass pillar taps, 32mm (Thirty two millimetre) C.P brass waste of standard pattern, including painting of fittings and brackets, curtting and making good the walls wherever require (630x450mm) (six hundred thirty into four hundred fifty millimetres)white vitreous china wash basin with a pair of 15mm (Fifteen millimeter) C.P brass for pillar tap, Hindware/Parryware /CERA, Sanitary ware, Naycer make including entire carriage of material within all leadsand lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Govt.

Providing and fixing White vitreous china pedastal of ( Hindware/Parryware /CERA /sanitary ware,Neycer make) for wash basin complete recessed at the back for reception of pipes and fittings upto all floor levels in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

Providing and fixing Stainless Steel A ISI 304 (18/8) (eighten/eight) kitchen sink size 510 x1040 mm ( five hundred ten into one thousand forty) millimetres bowl depth 250 mm ( Two hundred fifty ) millimetres of AMC, UNIK, DIAMOND, Neelkanth. make as per IS:13983 with C.I. brackets and stainless steel plug 40 mm (forty millimetres) including painting of fittings and brackets, cutting and making good the walls wherever required upto all floor levels in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

Providing and fixing PVC waste pipe for wash basin and all sink of Techno, Seiko make 32 ( Thirty two) Millimetres dia semi rigid pipe make of Kitech upto all floor levels in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

Providing and fixing uplasticised P.V.C. connection pipe with Brass unions 450 mm (four hundred fifty millimetre) length, 15 mm(fifteen millimetre) nominal dia of make Finolex including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etcetera complete of Unik, KS, AMCO, AVR, NVR, RR, SUW make including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

Providing and fixing 600mmx450mm (Six hundred into four hundred fifty millimetres) bevelled edge mirror Atul, Modi Guard ( Golden fish ) make of superior glass of approved quality with 6 mm (Six milliters) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete upto all floor levels in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

Providing and fixing C.P. brass long nose bib cock Cat no.CON 107KN of Jaquar, JAL, ESS ESS. Kingston,Gem,Parko,Techno,Seiko make single control of approved quality conforming to IS standards. 15 mm (fifteen millimetres) nominal bore upto all floor levels in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

Providing and Fixing Swan neck pillar tap with left hand operating knob single control CON-CHR-123BKN of Jaquar, JAL, ESS ESS. Kingston,Gem,Parko,Techno,Seiko make complete. upto all floor levels in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

Providing and Fixing C.P brass-15037PM pillar cock OPP of Jaquar JAL, ESS ESS. ingston,Gem,Parko,Techno,Seiko make complete. upto all floor levels in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

Providing and Fixing Angular stop cock with wall flange of opel prime no. CON 150083KN Stop Cock of Jaquar JAL, ESS ESS. Kingston,Gem,Parko,Techno,Seiko make complete in all respect upto all floor levels in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

Providing and Fixing Concealed stop cock with wall flange of opel prime no. CON 083FTK Stop Cock PM of Jaquar JAL, ESS ESS. Kingston,Gem,Parko,Techno,Seiko make single control of jaquar and all equavalent complete in all respect upto all floor levels in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

Providing and Fixing Angular stop cock with wall flange of opel prime no. CON 053KN of of Jaquar JAL, ESS ESS. Kingston,Gem,Parko,Techno,Seiko make single control complete in all respect upto all floor levels in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

Providing and Fixing Soap dish recessed type stainless steel AHS-1531 of Jaquar and all equivalent complete in all respectupto all floor levels in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

Providing and Fixing Soap dish stainless steel CAN -1131N of Jaquar and all equivalent complete in all respectupto all floor levels in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

Providing and fixing Towel Rack with lower hanger No. AHS-1581H of hotelier series of JAQUAR, and all equivalent of superior quality upto all floor levels in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

Providing and fixing Corner glass self with bract No.ACN-1173 of hotelier series of JAQUAR, ESS-ESS of superior quality upto all floor levels in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

Providing and fixing Glass shelf 550 mm (five hundred fifty millimetres) long with C.P. Brass bracket and guard rail no. AQN-7771 of Jaquar fixed with C.P. Brass screws etc complete upto all floor levels in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

Providing and fixing U shaped wall mounted rail with hings (600x 100) mm ( Six hundred into one hundred millimetre ) Cat No. B2210107 and wall mounted grab bar 600 mm ( six hundred millimetre) long CAT No. B2210106 jaguar and all equivalent superior quality complete upto all floor levels in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

Providing and fixing 8 mm (eight millimetres) dia C.P. / S.S. Jet with flexible tube upto 1.00( one point zero zero) metre long with S.S. triangular plate to Eureopean type W.C. of Kingston, Gem, Parko, Techno, JAL, ESS ESS. JAQUAR, Seiko. quality and make upto all floor levels in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

Providing and fixing gun metal gate valve with C.I. Wheel of approved quality (screwed end) make of Leader,Zoloto,Kilburn,C/M, Valnes,Sant upto all floor levels in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

25 mm (twenty five millimetrs) nominal bore

20 mm (twenty millimetrs) nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etcetera complete of Unik, KS, AMCO, AVR, NVR, RR, SUW make including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

15 mm (twenty five millimetrs) nominal bore

20 mm (twenty millimetrs) nominal bore

32 mm (Thirty two millimetrs) nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank 1000 (one thousand) litre make of sintex net capacity tank , IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

Providing and fixing ball valve (brass) of approved quality of Kingston, Gem, Parko, Techno, JAL, ESS ESS. JAQUAR, Seiko make, High and all low pressure, with plastic floats complete 15mm (Fifteen) millimetres nominal bore including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

Providing and fixing 110 mm (One hundred ten millimetres) high pressure PVC spigot and socket, waste and ventilating pipes ISI marked of Finolex make including fixing with approved adhesive etcetera complete including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

Providing and fixing 150mm(One hundred fifty millimetres)high pressure PVC spigot and socket, waste and ventilating pipes ISI marked of Finolex make including fixing with approved adhesive etcetera complete including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

Providing and fixing 110 mm X 90 mm(One hundred ten into ninety millimetres) PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etcetera complete. including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

Providing and fixing PVC door bend with ovalaccess door, insertion rubber washer 3 mm ( three millimetres) thick bolts and nuts ISI marked of Finolex make complete including fixing with approved adhesive etceteraincluding entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

110mm dia (one hundred ten millimetres)

150mm dia (one hundred fifty millimetres)

Providing and fixing PVC plain bend ISI marked of Finolex make including fixing with approved adhesive etcetera complete.including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

110mm dia (one hundred ten millimetres)

150mm dia (one hundred fifty millimetres)

Providing and fixing PVC plain double equal branch ISI marked of Finolex make including fixing with approved adhesive etcetera complete.including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

110mm dia (one hundred ten millimetres)

150mm dia (one hundred fifty millimetres)

Providing and fixing PVC single equal branch with oval access door, ISI marked of Finolex make insertion rubber washer 3 mm (three millimeyres) thick bolts and nuts complete including fixing with approved adhesive etcetera Complete including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

110mm dia (one hundred ten millimetres)

150mm dia (one hundred fifty millimetres)

Providing and fixing PVC collars ISI marked of Finolex make including fixing with approved adhesive etceteracomplete including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

110mm dia (one hundred ten millimetres)

150mm dia (one hundred fifty millimetres)

Providing and fixing PVC clamps ISI marked of Finolex make of approved design with steel screws and rawal plugs etcetera Complete including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

110mm dia (one hundred ten millimetres)

150mm dia (one hundred fifty millimetres)

Providing and fixing 110( one hundred ten ) millimetres dia PVC cowl of approved design of make Finolex, Prince, Kissan, SFMC, Diplast accessories upto all floor levels in all heights/ depth including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortor 1:4 (One cement: four Sand) With Sewer bricks conforming to IS : 4885 with RCC top slab in 1:1.5:3 mix (One cement : one point five sand : three graded stone aggregate ) 20mm (Twenty millimetres) nominal size foundation concrete 1:4:8 ( One cement : four sand : eight graded stone aggregate 40mm (Forty millimetres) nominal size) inside plastering 12mm (Fifteen millimetres) thick with cement mortar 1:3 (One cement : three sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( One cement : two sand : four graded/crushed stone aggregate 20mm (Twenty millimetres nominal size) finished with a floating cot of neat cement complete as per standard designsmooth complete in all respect including curing and testing Inside size 120x90 cm (one hundred twenty into ninety centimetres) and 90 cm (ninety centimetres) deep including C.I. cover with frame (medium duty) 500 mm (five hundred millimetrrs) internal diameter, total weight of cover and frame to be not less than 116 kg(one hundred sixteen killogramme) (weight of cover 58 kg (fifty eight killogramme) and weight of frame 58 kg (fifty eight killogramme) including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

Constructing soak pit 1.20x1.20x1.20 m (one point two zero into one point two zero into one point two zero ) metre filled with brickbats including S.W. drain pipe 100 mm (hundred millimetres) diameter and 1.20 m (one point two zero) metre long complete as per standard design including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

Constructing masonry Chamber 90x90x100 cm(ninety into ninety into one hundred centimetres) inside, in brick work in cement mortar 1:4 (one cement : four coarse sand) for sluice valve, with C.I. surface box 100 mm (one hundred millimetres) top diameter, 160 mm (one hundred sixty millimetres) bottom diameter and 180 mm (one hundred eighty millimetres)deep (inside) with chained lid and RCC top slab 1:2:4 mix (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetres) nominal size ), (including) necessary excavation, foundation concrete 1:5:10 (one cement : five fine sand : ten graded stone aggregate 40 mm (forty millimetres) nominal size and inside plastering with cement mortar 1:3 (one cement : three coarse sand) 12 mm (twelve millimetres) thick, finished with a floating coat of neat cement complete as per standard design including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

Providing and laying 450 mm ( Four hundred fifty millimetres) dia RCC pipesNon pressure NP-3 (three) Class (Medium duty) R.C.C. Pipes including collars/ spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 ( one cement : two fine sand) including testing of joints etcetra complete including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

Providing and fixing in position Circular shape 450 mm (four hundred fifty millimetres internal diamete pre-cast R.C.C. Manhole cover and frame of required shape and approved quality including entire carriage of material within all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Government.

NARESH KUMAR TULI