Development of Bhootnath Mahadev Temple : Bhuj, Kutch

Sr.No Description of items. Unit Qty Total Amount.

Exceeding 20 Cm. In Depth Consolidating Each Disposited

Layer By Ramming And Watering

Filling in foundation and plinth with murrum or selected

3 soil in layers of 20cm. thickness including watering, Cum 1,365.71 267.08

ramming and consolidating etc. complete.

Excavation for foundation upto 1.5 m depth including sorting out and

4 stacking of useful materials and disposing off the excavated stuff upto 50 Cum 2,243.55 621.26

Meter lead.(E) Hard Rock

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting

5 out and stacking of useful materials and disposing off the excavated stuff Cum 1,822.03 644.81

upto 50 Meter lead.(E) Hard Rock

Excavation for foundation for depth from 3.0 m to 5.0 m including sorting

6 out and stacking of useful materials and disposing off the excavated stuff Cum 1,465.00 668.36

upto 50 Meter lead.(E) Hard Rock

Extra for additional depth more than 5.0 m for excavation

for foundation including sorting out and stacking of useful

materials and disposing of the excavated stuff upto 50 m

lead.(E) Hard Rock

Demolition including stacking of serviceable materilas

8 and disposal of unserviceable materials with all lead and Cum 34.12 1,071.63

lift. (i) R.C.C. work

Demolition of Brick work and stone masonry including

stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift.(ii) In

Dismentaling tiled of stone floors laid in mortar

10 including stacking of serviceable materilas and disposal Sqm 360.00 48.63

of unserviceable materials with all lead and lift.

Dismentling doors, windows, ventilators etc. (wood or

steel) shutters including chowkhats architraves,

11 holdfasts and other attachment etc. complete and Each 5.00 254.68

stacking them within all lead and lift.(ii) Exceeding

Providing and laying cement concrete 1:3:6 (1- Cement :

3- Coarse sand : 6- crushed stone aggregates 20 mm

nominal size) and curing complete including cost of

formwork in (A) Wall Caps / Coping

Providing and laying in position Ready Mixed M-250

grade concrete for reinforced cement conctere work

13 using cement content as per approved Design Mix Cum 150.48 4,645.15

manufactured in fully automatic batching plant and

transported to site of work in transit mixer fo

14 RCC work in Tie beams at Grade slab level Cum 22.37 4,645.15

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and reinforcement for reinforced

concrete work in (A) Foundations, footings, Base of columns and Mass

Providing and laying controlled cement concrete M.250 and curing

completeincluding the cost of formwork and excluding the cost

reinforcement for reinforced concrete work in (D) Columns, Pillars posts and

struts, upto floor two level.

Providing and laying controlled cement concrete M.250 and curing complete

including the cost of formwork and excluding the cost reinforcement for

reinforced concrete work in (C) Slabs,landing,shelves,Balconies, Lintels,

Beams, Girders and Cantilever upto floor two level.

Providing and laying controlled cement concrete M.200

and curing complete including the cost of formwork and excluding the cost

reinforcement for reinforced concrete work in (B) Walls,

from top of foundation level upto floor two level

Providing and laying controlled cement concrete M.250 and curing complete

including the cost of formwork and excluding the cost reinforcement for

reinforced concrete work in (C) Slabs,landing,shelves,Balconies, Lintels,

Beams, Girders and Cantilever upto floor two level.

Providing and filling the expansion joint by polymer confirm to BS 4254-

1983 as per required shade and manufactured specifi-cation by making

groove of 25 mm x 12.5 mm lather by cutting or by repairing groove and

removing mortar drop or any other fore

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending,

binding and placing in position complete upto floor two level

Structural steel work ( Confirming to IS 4923-1997 riveted, bolted or welded

in builtup for all type sections, in framed work, including cutting, hoisting,

22 fixing in position and applying a priming coat of approved steel primer all Kg 6091.2 130.52

complete as per the structural designs and directions of Engineer in

charge.Column (122 x 61 x 3.6mm)

Brick work using common burnt clay building bricks having crushing

23 strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement cum 111.52 4,203.06

Mortar 1:5. (1- Cement : 5 -fine sand)(A) Modular

Brick work using common burnt clay building bricks having crushing

24 strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement cum 246.23 4,550.60

Mortar 1:5. (1- Cement : 5 -fine sand)(A) Conventional

Brick work using common burnt clay building bricks having crushing strength

not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5.

(1- Cement : 5 -fine sand)(A) Conventional Extra for brick work in

superstructure above plinth level upto floor two level (B) Conventional

Providing 10mm thick cement plaster in single coat on

brick/concrete walls for interior plastering upto floor two

level and finished even and smooth in (ii) Cement mortar

1:4 (1-cement :4-sand)

Providing 20 mm thick double coat mala cement plaster

on interior brick /Exterior/ concrete work for plastering

27 comprising of base coat of 12 mm thick cement plaster Sqmt 1,506.46 281.14

in cement mortar (1 Cement : 4 coarse sand) in rough

finishing and 8 mm thick top co

Providing 15mm thick cement plaster in single coat on

Rough (Similar)side of single or half brick walls for

interior plastering upto floor two level and finished even

and smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

Providing and filling rubbles including hand packing and

29 filling interstices with quarry spalls behind abutments Cum 3,795.00 1,083.28

and between returns as directed.

Providing and laying polished Kota stone slab flooring

over 20mm (Average) thick base of cement mortar 1:6

30 (1-cement : 6-coarse sand) or L.M. 1.1.5 laid over and Sqmt 557.88 1,069.98

jointed with grey cement slurry including rubbing and

polishing etc. complete. (B) 30 mm

Providing and laying polished kota stone slab 25mm

thick in risers of steps,skirting Dedo and pillars laid on

31 10mm thick cement mortar 1:3 (1-Cement : 3 coarse Sqmt 808.10 1,132.82

sand) and jointed with gray cement slury mixed with

pigment to match the shade of slab inc

Providing and laying Vitrified tiles 8 to 10 mm thick , 24''

x 24'' in flooring treads of steps and landing laid on a

32 bed of 12mm thick cement mortar 1:3 (1-cement : Sqmt 72.07 1,109.27

3-coarse sand ) finishing with flush pointing in white

Providing and laying Vitrified tiles 8 to 10 mm thick , 24''

x 24'' in skrting risers of steps and dedo on 10mm thick

cement plaster 1:3 (1-cement : 3-coarse sand) and

jointed with white cement slurry

Granite flooring:Providing,cutting and laying in position to pattern pre-

polished 20mm thick granite flooring as speified to lactions in cement

mortar bed(to make up required finished floor level) of mix 1:4 of minimm

20mm thickness.The joints shall

Stone pitching work-(i) Uncoursed Rubble Masonry with hard stone of

approved quality in foundations and plinth in Cement

Mortar 1:6 (1-cement : 6-coarse sand including levelling

up etc. complete

Providing and laying marble stone slab flooring over 20mm (average)base of

cement mortar 1:6 (1-cement : 6 coarse sand) or L.M. 1:1.5(1- lime putty :

1.5 - coarse sand) laid and jointed with gray cement slurry including rubbing

and polishing complete

Providing and fixing of mirror panelling of approved quality with edge

bevelling as shown in the drawing.The mirror shall be fixed on 12mm marine

ply with appropriate SS claimps made to hold mirror in place as shown in the

detailed drawings.The plywo

Granite Cladding -Providing, cutting, laying in position to pattern pro-

polished granite cladding to walls, columns and other vertical faces,in

cement mortar 1:4 of approved thickness with cement slurry,pointing the

joints with the matching polymer b

Providing wood work in frames of Doors, windows cleare

39 story windows and othersimilar works wrought, framede Cum.DM 5.80 604.19

and fixed in position. (A) Indian Teak Wood

Providing and fixing 35 mm thick shutters for Doors,

windows and clear story windows including anodised

40 alluminium butt hinges with necessary screws.(A) Indian Sqm 4.20 4,060.46

Teak Wood (1) Fully Panelled

(ii) Providing and fixing glazed louvered glass windows and ventilators with

41 teak wood frame 10cm. x 7cm. size including 3 coats of oil painting to wood Sqm 39.48 4,390.45

work etc.complete. with wooden louvers plank 12mm thick

Providing and fixing 30mm thick FACTORY MADE

SOLID SINGLE SIDE PRELAM PANEL PVC DOOR

SHUTTER consisting of frame made out of M.S. tubes of

19 gauge thckness and size of 19mm x 19mm for stiles,

and 15mm x 15mm for top and bottom rails. The M.s.

Fixing Metallic tower bolts of sizes with necessary

43 screws etc. complete (Tower bolts and screws to be paid Each 32.00 50.94

under separate items)

Fixing metallic or plastic door handles of sizes with

44 necessary screws etc. complete (Door handles and Each 32.00 3.81

screws to be paid under separate items)

Fixing metallic door latches of sizes with necessary

45 screws etc. complete (Door latches and screws to be paid Each 32.00 6.79

under separate items)

Fixing metallic floor door stoppers of sizes with rubber

cushion screws etc. to suit shutter thickeness complete

(Floor door stopper with rubber cushion and screws to

be paid under separate items)

Fixing metallic door handles or knobs for mortice locks

47 with necessary screws etc. complete (Door handles Each 32.00 3.81

/knobs and screws to be paid spearately)

Providing and fixing post and pipe railing as per detailed

48 drawing including 3 coats of painting to steel works Rmt 800.00 1,201.52

Applying two coats of putty & two coats of primer of

approved brand and manufacture on new wall surface to

49 give an even shade including thoroughly brushing the Sqm 3,609.18 40.19

surface free from mortar dropping and other foreign

matter and sand papered smooth.

Distempeing (Two coats) with oil bound distemper of

approved brand and manufacture and of required shade

50 on wall surfaces to give an even shade, over and Sqm 3,609.18 75.92

including a priming coat with distemper primer of

approved brand and manufacture after thoroughl

Finishing wall with weather proof exterior emulsion

paint on wall surface (two coats) to give an required

51 shape even shade after thoroughly brushing the surface Sqm 2,180.63 119.07

to remove all dirt, and remains of loose powdered

materials.etc complete

Providing and fixing sheet glass, selected quality (Type-C)

bedded in putty and fixed with wooden beading

including the cost of wooden beadings of first class

teakwood and necessary cutting of glass. (2) 6 mm thick.

Extra for using ground glass (frosted or obscured on one

side) instead of plain glass.

Applying general insecticide pest control treatment to

floors, cupboards etc including labour materials etc.

54 complete. Using Imidacloprid 30.5 SCas Per IS 6313 part Sqmt 690.00 90.72

-II( (0.075% concentration by mass) is recommended

10.5ml chemical diluted with 5 lit

Providing and fixing pre-cast concrete kerb stone of gray

cement based concrete block 30cm length,30cm height

55 and 15cm thick of M200 grade concret as per approved Sqmt 350.00 396.90

design and including excavation for fixing in proper line

and level,filling the joint w

Providing and fixing of Tensile Arch supported Roof cover comprising of

baseplate connected to foundation,PVC Coated polyester Membrane/Silicon

56 coated Glass/Teflon coated Glass,Bale Ring /Membrane plate to provide a Sqmt 900.00 2,980.00

link between membrane and Structure Element and Fabric membrane

Should have PVC/Teflon Glass/Silicon Glass.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR

13.5) PIPE having National Sanitation Foundation (NSF) seal for potable

water of following dia. nominal bore tube fittings and clamps including

making good the wall, ceilin

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR

13.5) PIPE having National Sanitation Foundation (NSF) seal for potable

water of following dia. nominal bore tube fittings and clamps including

making good the wall, ceilin

Providing and fixing Gun metal check or non-return fullway wheel valve.(C)

Providing and fixing Gun metal check or non-return fullway wheel valve.(A)

Providing and fixing wash down water closet (European type, W.C. Pan) with

integral P or S trap including jointing the trap with soil pipe in Cement

Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and

paid for separately)(A) vitreo

62 Providing and fixing G.I. inlet connection for flush pipe with W.C. Pan No 7.00 40.94

Providing and fixing plastic seat and cover for wash down water closer with

C.P. brass hinges and rubber buffers. (B) Black plastic seal and cover.

Providing and fixing washbasin with single hole for pillartap with C.I. or M.S.

brackets painted white including sutting holes and making good the same

but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v

65 Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia. No 9.00 67.91

66 Providing and fixing Rubber plug for sink or wash basin. No 9.00 17.15

Providing and fixing chromium plated, bottle trap with necessary couplings

of approved quality for wash basin.

Providing and fixing screw down bib taps of following size.(A) Brass screw

down bib tap polished bright. (i) 15mm dia

Providing and fixing Urinal of approved quality including connection with

69 trap and with integral longitudinal flush pipe.(A) Squating plate pattern No 12.00 1,628.53

white earthenware 550mm x 300mm.

Providing and fixing 12.5 Litres low level flushing cistern with a pair, of C.I.

or Mild brackets, complete with fittings such as lead valve less syphon,

15mm nom.nal size brass ball valve with polythene float, C.P brass handle

unions and couplings finish

Providing and fixing chromium plated brass half trun flush cock of approved

quality including fixing in pipe line etc. complete.(i) 20mm dia.

Providing and fixing screw down bib taps of following size.(C) Gun metal

screw down bib tap. (i) 15mm dia.

Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A)

100mm dia. Each

Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets

74 fixed to wooden plugs with C.P. brass scews.(B) 600mm x 20mm size. or No 7.00 616.42

20mm inlet.(A) 100mm dia. Each

75 Providing and fixing toilet paper holder.(A) C.P. Brass No 7.00 427.99

Providing erecting and fixing double coated ISI water tank of required

76 capacity each with all necessary fittings and connection etc. complete on Litre 50,000.00 3.95

Providing and fixing cast iron (Spun) Nahni trap of the following nominal

diameter of self cleaning design with C.I. screaed down or higned grating

including cost of cutting and making good the walls and floor 100mm inlet

and 50mm outlet.(C) 100mm dia.

Providing and fixing 100mm sand cast iron grating for gully, floor or Nahni

Providing and fixing cast iron spigot and socket soil, waste and ventilating

pipes of the following nominal size.(B) 75mm dia.

Providing and fixing cast iron spigot and socket soil, waste and ventilating

pipes of the following nominal size.(C) 100mm dia.

Providing laying (to level or slopes) and jointing reinforced concrete Light

duty non-pressure pipes I.S. class NP2 of the following internal diameter

with collars and butt ends prepared for collar joints including testing of

joints complete.(E) 450mm

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse

sand : 4-graded stone aggregate 20mm nominal size) foundation concrete

1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside

plastering 15mm thick with Cement

Constructing Manhole with R.C.C. top slab in 1:2:4 mix Constructing brick

masonry chamber for underground C.I. Inspection chamber and bends with

bricks having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover

with frame (Light duty)

Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight

not less than 35Kg.

85 Providing and fixing in position cowel went to pipes.(C) 100mm dia No 4.00 505.17

(B) Providing sock pit of 5.00 Cu.M. Volume including excavating and filling

brickbats with dry masonry work at top for 45cm. height including covering

the top with stone including providing vatas in C.M. 1:3 with finishing curing

etc. complete as design

POINT WIRING FOR LIGHT / FAN WITH MODULAR PLATESWITCHES ANCHOR

/ MK / LEGRAND: Providing and laying point wiring in concealed conduits for

thefollowing points using specified 1100V grade PVC insulated,

FRLSmultistranded 3 x 1.5 sqmm copper conductor

Same as above but for 5A socket controlled by one 5A switch on thesame

Same as above but for 5A socket controlled by one 5A switchindependently

89 mounted including providing wiring with 3 runs of 1.5sqmm pvc insulated No. 20.00 900.16

copper wire through PVC conduit

Same as above but for 5/15A socket controlled by 15A switchindependently

90 mounted including providing wiring with 2 runs of 2.5sqmm and 1 run of 1.5 No. 25.00 435.56

sqmm PVC insulated copper wire through PVCconduit.

Same as above but for AC point with 2 runs of 4 sqmm (P&N) and 1 runof

2.5 sqmm (earthing) PVC insulated, FRLS multistrand copper cable in25 mm

dia PVC conduit from MCBDB to 20 A power socket. The conduitshall be

partly/fully concealed in all types o

Supply, laying, and commissioning of wiring using following sizes ofPVC

insulated, FRLS, unsheathed, multistraned copper wire drawn inPVC

conduits. Rate to include supply of 16 GI fish wire, conduits &accessories,

wiring, terminations etc. complete

4 runs of 10 sq mm and 1 run of 6 sqmm copper wire in 40 mm dia

PVCconduit from panel to Distribution Boards

4 runs of 6 sqmm and 1 run of 4 sqmm copper wire in 32 mm dia

PVCconduict from panel to Distribution Boards.RMT170144

145Supply, fixing and commissioning of 305 mm dia. Exhaust fansincluding

bird louvers, frame works and other civil works like chippingand making the

surface good etc.NOS1570146

LIGHT FIXTURES:

Supply, fixing and commissioning of following light fittings. Rate toinclude all

95 accessories, interconnection of wires from ceiling rose to thefittings and No 36.00 2,032.63

fluorescent tube /GLS/PL lamps, copper choke etc 1 x 36 W tube light fitting

with lamp Philips make cat no. TCS 19/136HPF or equivalent .

1 x 60 W Bulk head luminaire including lamp Phillps cat no. NXC

orequivalent (Outside building)

97 Angle Holder Anchor make including lamp 60W(Toilet) No 14.00 69.69

1 x 36 W tube light fitting with lamp Philips make cat no. TCS 21/136HPF or

2 x 36 W tube light fitting including lamp Phillps cat no TBS 50/236 HPFor

equivalent (for false ceiling area)

Supply and fixing of wall mounting type meter board made out of 16SWG

CRCA sheet steel and single iron with 3 nos 200A Fuse cutoutsN.L , 1 no.

earth link, 1 no. neutral link and space for accommodating 1no. 3 ph, 4 wire

KWH meter complete with adequa

Supply, erection, testing and commissioning of floor mounting typecubical

panel board made out of 16 SWG CRCA sheet steel with 300 ATPN copper

bus bars, interconnections, earthing, powder coating andcomprising of the

followings as required.(TYPE I AS

Supply, erection, testing and commissioning of floor mounting typecubical

panel board made out of 16 SWG CRCA sheet steel with 200 ATPN copper

bus bars, interconnections, earthing, powder coating andcomprising of the

following as required. (TYPE II A

Same as above but with following details:- Incomer :2 nos 63A TPswitch fuse

unit with HRC fuses for DG and EB / 1no. 63A 4 polechange over switch (on

line) / 2 no volt meter with volt meter selectorswitch / 2 no ammeter with

CT & ammeter selector swi

Supply, installation and commissioning of 63A TPN MCB DB Incomer :1 no

A , 4 Pole MCB Outgoings : 18 nos, 10A/16A/20A SP MCBs

Supply, installation and commissioning of 32A TPN MCB DB Incomer :1 no

A , 4 Pole MCB Outgoings : 12 nos, 10A/16A/20A SP MCBs

Supply and laying following size PVC insulated, sheathed, armouredcable of

105 approved make MTR 250.00 232.30

3.5C X 35 sqmm AL cable

106 4C X 16 sqmm AL cable MTR 250.00 168.42

107 4C X 6 sqmm AL cable MTR 250.00 121.96

108 4C X 2.5 sqmm AL cable MTR 250.00 127.77

109 3C X 2.5 sqmm AL cable MTR 250.00 116.15

End termination of following cables with double compression NFLPgland and

110 crimping sockets No 6.00 220.69

3.5C X 35 sqmm AL cable

111 4C X 16 sqmm AL cable No 25.00 191.65

112 4C X 6 sqmm AL cable No 25.00 133.57

113 4C X 2.5 sqmm AL cable No 25.00 162.61

114 3C X 2.5 sqmm AL cable No 25.00 121.96

End termination of following cables with double compression FLPgland and

115 crimping sockets No 25.00 145.19

3C X 2.5 sqmm copper cabl

Excavation in any type of soil including WBM / asphalt up to 600mmdepth

116 and 300mm wide including supply and laying 150mm thick sandon top and Rmt 250.00 185.84

bottom of cable, supply and laying bricks laid flat on top,back filling trench

Junction box for yard light pole

Supplying and fixing 150mm x150mm x125mm weather proof out

117 doorjunction box fabricated out of 14 SWG CRCA sheet of IP 54 category No 4.00 820.02

ofprotection with rubber gasket and having locking arrangementincluding

required connector, 10A SPMCB

Yard light Pole

Supply, Fabrication and Erection of 7 mtrs high galvanised Pole havinga base

118 plate of size 300x300x16 with 1000 mm long 40mm MS pipesuitable for No 4.00 7,549.75

mounting 1 no. fixture as per attached detail specificaton.Job also includes

foundation for the same. Pol

Street Light Fitting.

P/f 7 mtr high hot galvanised octagonal pole, continously tapered (bolt fixing

type) in single

119 section made out of 3mm thick sheet suitable for bracket having top dia 70- No 80.00 11,034.25

bottom dia 130-150 mm, base plate size 220X220X12 to 240X240X16 mm

Supplying and erecting, commissioning and testing of Diesel Generating set

confirming to IS: 4722:1968 & BS:5514 having continuous rating, 3 phase,

415 volts, 50 cycles A.C. supply comprising of a totally enclosed air/water

cooled diesel engine with multi-cylinders developing suitable BHP not less

than following capacity at 1500 RPM with 10% overload for one hour in

hours with standard accessories like fly wheel, lubricating oil cooler, "A"

class governor, heavy duty fuel wheel and lubricating oil filter, oil bath air

filler, lubricating oil pressure gauge, end exhaust manifold, standard set of

tools with adjustable spanners, screw drivers, cylinder head to cover, joint

cylinder head to exhaust, element lube oil filter, 12 / 24 volts electric

starting equipment complete with standard heavy duty battery, dynamo, cut-

outs, ammeter, necessary wiring, pressure gauge, starter etc and heavy duty

Residential type exhaust silencer and vertical hot air duct both indicator

lamps duly wired with HRC fuses.

I/We am/are willing to carry out the work at… % above/below percent (Should be written in figures and words) of the estimated rate mentioned above. Amount of

my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C, Date:11/05/2017 as

stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption have been deducted from the

rate of original item at the rate of input rate mentioned in all the tender.