Fabrication, painting and erection of 3 Nos regulator shutters of size 1.4m (w) x 2m (h) at Keezhchira Check Dam in Thirumarady Grama Panchayath in Ernakulam District

Amount

Supply of materials for Shutter (3 Nos)

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

85.116 : Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

85.118 : Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

Supply and fixing screw hoist(63mm srew rod) with worm &pinion

od10360/2020_2021/MH : Providing 63 mm EN-8 screw rod 7.50 tonne capacity 4.00 M lift screw hoist having one number of EN -8 screw shaft, having a lifting speed of around 5.00 cm/min for 24 rpm of hand operation including cost of all materials, labour, hire charges and conveyance.

od10363/2020_2021/MH : Providing worm and pinion having a lifting speed of around 5.00 cm/min for hand operation including coslof all materials, labour, hire charges and conveyance.

Supply and stacking material for Hoisting bridge and sill beam

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

od10415/2020_2021/MH : Supply of Bolt and nut for fixing hoisting girders with bridge and also for fixing gear box assembly and stool base

85.107 : Supply of MS round bar including cost of conveyance charges

Fabrication of shutters, Hoisting mechanism

od10361/2020_2021/MH : Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight ) /Hoisting Bridge /Platform and accessories etc. for the same as per approved specifications, drawings and directions ofdeptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handlingcharges etc complete but excluding cost of material already supplied

Erection of shutters, Hoisting bridge and platform

od10362/2020_2021/MH : Erection of the Canal Shutter ( Up to 2 Tonne weight ) / Hoisting Bridge / Platformincluding hand rails , lader etc. for the same including . alignment correcting and settingcomplete including cost of all labour, machinery, incidental and conveyance , lead and liftcharges etc complete but excluding cost of materials already supplied

Painting shutters, hoisting bridge, hoisting platform etc

85.115 : Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

85.114 : Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

Provide ring bund and erection of sillbeam

60.1.2 : RING BUND Type II Putting up ring bund with earth fille gunny bags of top width 1.0m bottom width 2.0m height 2.0 m side and filling in between with earth to form ring bund and maintaining the same leak proof till the completion of the work and clearing the site by dismantling the bund after completion of the work.etc.complete.

50.2.3.1 : Pumping or Bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete

15.2.1 : Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

85.108 : Fabrication, erection and commissioning of Structural steel Embedded parts in IS2062 Grade and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour , machinery , incidental and handling charges etc complete but excluding cost of material already supplied

V S BIMALRAJ

Bidder Name

ASHIFUL HAK.C

V S BIMALRAJ