CARRYING OUT INTERIOR FINISHING WORKS OF THE DINING HALL AREA EXTENSION AT GAIL RPNHQ VADODARA

Providing and fixing decorative 3D wall tiles with integrated LED illumination, manufactured from composite material of approved quality, design, pattern, colour, texture and size. The tiles shall be supplied in approved profiles and dimensions and fixed on the prepared wall surface using manufacturer-recommended adhesive/chemical fixing system, complete with all necessary accessories and fixing arrangements. e scope shall include preparation of the existing wall surface to achieve the required line, level, plumb and finish. Wall preparation shall comprise POP punning/plastering of varying thickness from 6 mm to 25 mm as required to correct surface undulations and obtain a true, even and properly aligned substrate for installation. Thereafter, providing and fixing 12 mm thick BWR/Marine Grade plywood of approved make and quality on the prepared wall surface using suitable screws, nails, fasteners and all necessary fixing accessories, complete as required to form a rigid backing surface for the decorative wall panel system. Approximately 40% of the total installed tiles shall be provided with in-built LED illumination integrated within the tile profile as per the approved design and approved layout. A single electrical power point/termination point shall be provided by GAIL at a designated location near the installation area. Distribution of wiring from the designated power point to all illuminated tiles, including concealed wiring, interconnections, routing through grooves/recesses, connectors, drivers/power supplies (if required), testing, commissioning and successful operation of the complete illumination system, shall be entirely within the scope of the contractor.

Providing and applying Asian Paints Royale Shyne Luxury Emulsion (or equivalent approved brand) on interior wall surfaces in approved shade and finish over properly prepared surface, including surface cleaning, rubbing with emery paper, filling minor imperfections with wall putty wherever required, application of one coat of suitable interior primer, and two or more coats (as per manufacturer's specifications) of Royale Shyne Luxury Emulsion or equivalent applied by brush/roller/spray to achieve a smooth, uniform, high-sheen washable finish

Providing and fixing wall panelling comprising a framework of 25 mm × 50 mm hollow aluminium square sections of 1.6 mm thickness, fixed securely to the wall at 600 mm c/c or as directed by the Engineer-in-Charge (EIC). The framework shall be clad with 12 mm thick BWP/BWR grade plywood including all necessary grooves, cut-outs, edge finishing, screws, fasteners, adhesives, supports, and accessories required for complete installation. The item shall include all labour, materials, tools and tackles, complete in all respects, as per the approved drawings and to the satisfaction of the Engineer-in-Charge.

Providing and fixing customised cleanable embossed Golden Coil wallpaper in approved design, pattern, texture and colour, including surface preparation by applying wall putty and primer of approved make to obtain a smooth, even and dust-free surface, preparation of design, submission of samples for approval by the Engineer-in-Charge, supply and application of manufacturer-recommended adhesive, alignment of joints, pattern matching, trimming, finishing, and complete installation on prepared wall surfaces. The wallpaper shall be wrinkle-free, washable and securely bonded to the substrate, ensuring a uniform and aesthetically pleasing finish. The item shall include all materials including putty, primer, adhesive and wallpaper, labour, tools and tackles, scaffolding, transportation, wastage, cleaning of the completed surface, and all incidental works required to complete the work in all respects, as per the approved architectural drawings, manufacturer's specifications and the directions of the Engineer-in-Charge. The scope of work includes providing and fixing a total of 2 (two) wallpaper.

Providing and laying Italian marble finish vitrified tiles of size 2400 mm × 1200 mm, of approved make, colour, shade and pattern, with rectified edges, on a 20 mm thick cement mortar (1:4) bed, laid to the required line, level and slope, including cutting, drilling, edge finishing, filling of joints with matching tile grout, cleaning and finishing of the surface. The item shall include all materials, cement mortar, tile spacers, labour, tools and tackles, wastage etc. to complete the work in all respects, as approved architectural drawings and the directions of the Engineer-in-Charge.

Providing Wood Work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length all complete and as directed by EIC (hold fast lugs or dash fastener shall be paid for separately) (Second class teak wood).

Providing and fixing panelled or panelled and glazed shutters for doors, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class teak wood 35 mm thick shutters

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Second class teak wood

Providing and fixing 6 mm plain frosted glass of approved make (Saint Gobain or Equivalent) and quality in door shutters, of approved pattern and design as per Architect's drawings/details, including supply and fixing of wooden beading/patti of approved species, size and profile for securing the glass in position.

Providing and applying Polyurethane (PU) polish on wood surfaces, using approved premium make PU system comprising surface preparation by sanding with emery paper, filling of minor imperfections with matching wood filler, application of suitable wood sealer, stain (where required), and minimum three coats of clear PU polish (one base coat and two finish coats) with intermediate sanding to obtain a smooth, uniform, scratch-resistant, moisture-resistant and matt/gloss finish, as approved by the Engineer-in-Charge. The item shall include all materials, labour, tools and tackles, consumables, scaffolding, surface cleaning, protection of adjoining finished surfaces, and all incidental works required to complete the work in all respects, as per the manufacturer's specifications and the directions of the Engineer-in-Charge.