Periodical Maintenance of road from Alampur Dehru Shakoh Talwar Kaluhi Lambagaon Jaisinghpur Dalu Khalta Harsipattan Road under Additional AMP 2020-21 (MDR101)

Amount

Providing, laying and rolling of built-up spray grout over prepared base consisting of single Layer composite construction of crushed coarse aggregates using motor grader for aggregates, key stone chips spreader may be used with application of bituminous binder after each layer, and with key aggregates placed on top of the layer to serve as a base, conforming to the line, grade and cross-section specified, the compacted layer thickness being 75 mm (seventy five millimetre) as per technical spacification clause 505 by manual mean bitumen-VG-10 (VG ten) including carriage of materials within all leads , lifts and other incidentals or as per the directiones of Engineer-In-Charge. The rate including of octroi, royality, GST, Malkana, toll tax, Sale tax or other taxes imposed by the Government.

Providing and applying tack coat with Bitument emulsion (RS-I) using emulsion pressure distributor at the rate 0.225 kg (zero point two two five kilograme) per/ Square metre on the prepared Bituminious surface cleaned with hydraulic broom as per M.O.R.D. technical specifications section No. 503 or as per the entire satisfaction and direction of Engineer - in- Charge including carriage of materials within all leads, lifts and other incidentals. The rate including of octroi, royality, GST, Malkana, toll tax, Sale tax or other taxes imposed by the Government.

Providing and laying 30mm thick (Thirty millimetre) bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.50%(five point fifty) per cent by weight of total of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects or as per the direction by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate including of octroi, royality, GST, Malkana, toll tax, Sale tax or other taxes imposed by the Government.

Sanjeev Sood