INSTALLING 100KVA DTR AT VATHILMADA-KUNHIPARAMBA ROAD

Fitting and erecting one HT DP using A type pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads.

Fitting 5 channel cross arms, AB switch, DO fuse, LA, HT & LT connections on existing DP, 3 LT fuses.

Fitting one Additional V cross arm in existing single pole incl. conveyance of materials.

Drilling hole of various sizes on existing Channel/Cross Arm.

Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle).

Providing one Earth using earth pipe incl. digging & backfilling pit and supply of charcoal, salt, sand etc.

Stringing of 11 kV Aerial bunched cable of size 3 x 120 + 1 x 95 sqmm with bare/insulated Messenger through existing poles

Stringing of 1.1 kV Aerial bunched cable of size 3 x 70 + 1 x 16+1x 50 sqmm with bare/insulated Messenger through existing poles

Erection of Anchor clamp / dead end clamp for 11kV ABC of any size

Erection of suspension clamp for 11KV ABC of any size

Erection of Anchor clamp / dead end clamp for LT ABC of any size

Erection of suspension clamp for LT ABC of any size

Providing Cable Tie

Installing One No. Insulation piercing connector of size Main :16 to 95 ,Tap:1.5 to 16 Sq.mm

Installation of Insulation piercing connector for main to service line main :16-95 sqmm, Tap 16-95 sqmm

Fitting and erecting one HT PSC Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Installation of Pre-insulated lugs for 50sqmm

Installation of Pre-insulated lugs for 70sqmm

Providing End Caps

Fiting One no MVT on existing cross arm including 2 nos end termination (for One phase) of any rating for 11 kV AB Cable

Installing One No. 4 way Satellite Connector of size Main :16 to 95, Tap:4 to 35 Sq.mm to the LT AB cable of Standard size

Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit.

Erecting one 100kVA Transformer to existing DP and giving connections, incl. loading & unloading, excluding transportation.

Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).

Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion.

Dismantling and reconnecting 3ph service connection from the OH line incl. lowering down the WP portion.

Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading.

Transporting poles by hired vehicle to a distance beyond 5km and carrying upto 4 poles. (Running km).

Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Dismantling (without damage) one km LT Sph 2 wire OH line, cross arms, insulators and stacking the conductors in rolls.

Additional rate for refitting/redoing one Shackle set and reshackling one span while renewing any type of pole.

Providing Strut using LT PSC pole incl. digging & back filling pit.

Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of all material (as per specification).

Providing Transformer fencing , using 50x50x6mm Angle iron, 40 x 6 mm MS flat and 8 mm MS rod as specified, incl cost of transportation & foundation

Providing yard metalling with 6mm & 40mm thick blue metal as specified after constructing a curb wall.

Installing one DTR meter with box on existing channel/angle cross-arm on DP structure and giving connections including conveyance

Providing Stay for LT poles incl. digging & back filling pit.

Additional rate for excavation of one Pit for LT Pole/LT Stay in Rock.

Additional rate for excavation of one Pit for HT Pole/HT Stay in Laterite.

Additional rate for excavation of one Pit for HT Pole/HT Stay in Hard Laterite.

Fitting one additional Fuse unit and giving connection from Transformer to fuse and DB to LT OH line.

Additional rate for excavation of one Earth Pit (2.5m depth) in Hard Laterite.

Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole incl. conveyance of materials.

Fitting one additional HT pin with insulator

Erecting one LT PSC Pole in position incl. digging & back filling pit.

Transporting Transformers by hired vehicle upto 5km and upto 2 No. of 63 to 250kVA Transformers / RMUs excluding loading & unloading.

Transporting Transformers by hired vehicle to a distance beyond 5km and upto 2 No. of 63 to 250kVA Transformers / RMUs (Running km).

Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP incl. conveyance of materials.

Fitting one No. Section fuse on LT line with dropping cables, crimping sockets, connecting with bolt&nut etc.

Transferring LT Sph 2/3 wire OH line to newly erected HT/LT pole and refitting all items to the new pole.

Transferring LT 3ph 4/5 wire OH line to newly erected HT/LT pole and refitting all items to the new pole.

Providing one Coil Earth using GI earth wire, digging separate pit at standard distance away from the pole/structure & backfilling.

Renewal of existing damaged/old 11kV PSC/RCC Pole with new A type pole in place and refitting of all items incl. conveyance (except pole).

Additional rate for refitting/redoing one Disc set while renewing any type of 11kV cut pole