Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹13.1 L
EMD Value
₹14,000
Closing Date
6 Mar 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer, Sabarantha R & B Panchayat Division, Himmatnagar
Constg. of New Library Building At Navalpur Village Under PAI - 2025-26, Ta. - Prantij Dist. - Sabarkantha (2nd Trial)
273528
15/2025-26
Open
Civil Works - Buildings
Works
Sabarkantha
₹900
Yes
Executive Engineer, Panchayat R & B Division, Himatnagar
₹14,000
Yes
6 Feb 2026
6 Feb 2026
6 Feb 2026
6 Mar 2026
6 Feb 2026
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
1 Excavation for foundation upto 1.5 M depth 46.10 122.99 Cmt
including sorting out and stacking of useful
materials and disposing of the excavated stuff
upto 50 M lead (A) Loose or Soft Soil
2 Excavation for foundation for depth from 1.5 14.00 136.33 Cmt
m to 3.0 m including sorting out and stacking
of useful materials and disposing off the
excavated stuff upto 50 Meter lead. (A) Loose
or soft soil
3 Filling available excavated earth (excluding 48.60 136.92 Cmt
rock in trenches plinth, slides of foundations
etc. in layers not exceeding 20 cm in depth
consolidating each deposited layer by
ramming and watering)
4 Filling in foundation and plinth with murrum or 37.50 294.38 Cmt
including watering ramming and consolidating
etc. complete
5 Providing and laying cement concrete work 4.00 4046.42 Cmt
1:2:4 (M-150) (1- Cement : 2- Coarse sand : 4-
graded stone aggregates 20 mm nominal
size) and curing complete excluding cost of
formwork and reinforcement for reinforced
concrete work in (A) Foundations, footings,
Base or columns and Mass concrete.
6 Providing and laying cement concrete 1:1:2 7.00 4850.02 Cmt
(M-250) and curing complete including the
cost of form work but excluding cost of
reinforcement for reinforced concrete work in
Foundations, footings bases of columns and
the like and Mass concrete for Footing
7 Providing and laying cement concrete 1:1:2 1.50 8655.70 Cmt
(M-250) and curing complete including the
cost of form work but excluding cost of
reinforcement for reinforced concrete work in
Foundations, footings bases of columns and
the like and Mass concrete for below plinth
8 Providing and laying cement concrete 1:1:2 5.80 6395.32 Cmt
(M-250) and curing complete including the
cost of form work but excluding cost of
reinforcement for reinforced concrete work
for Ground Beam.
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
9 Brick work using common burnt clay building 12.80 4214.33 Cmt
brick having crushing strength not less than
35 kg/sq. cm. in foundation and plinth in
cement mortar 1:6 ( 1 Cement: 6 fine sand)
(B) Convention
10 Providing and laying Cement Concrete 1:1.5:3 5.30 4682.36 Cmt
(M 200) and curing complete Including the
cost of formwork But Excluding the cost of
reinforcement for reinforced concrete work in
R.C.C. Plinth Slab.
11 Providing and laying cement concrete 1:1.5:3 3.70 8730.44 Cmt
(M 200) and curing complete including the
cost of form work but excluding cost of
reinforcement for reinforced concrete work
for Column in Goround Floor (A) Ground Floor
12 Providing laying cement concrete 1:1.5:3 (M 6.30 6317.55 Cmt
200) and curing complete including the cost of
formwork but cost of form work but excluding
the cost of reinforcement of reinforced
concrete work in (C) Beams, Girders and
Cantileve for Ground Floor
13 Providing and laying cement concrete 1:1.5:3 0.70 9284.93 Cmt
(M 200) and curing complete including the
cost of form work and excluding the cost of
reinforcement for reinforced concrete work in
(c) Lintel in Ground Floor
14 Providing and laying cement concrete 1:1.5:3 0.60 10234.32 Cmt
(M 200) and curing complete including the
cost of form work and excluding the cost of
reinforcement for reinforced concrete work in
(c) Chajja in Ground Floor
15 Providing and laying cement concrete 1:1.5:3 9.60 7258.87 Cmt
(M 200) and curing complete including the
cost of form work but excluding cost of
reinforcement for reinforced concrete work for
Slab in Ground Floor
16 Providing TMT Bar FE 415 reinforcement for 4696.50 68.33 Kg.
R.C.C. work including bending, binding and
placing in position complete upto floor two
17 Brick work using hydraulically pressed 21.30 4495.98 Cmt
common burnt clay building brick having
crushing strength not less than 35 kg/sq. cm.
in super structure above plinth level up to floor
two level in cement mortar 1:6 ( 1 Cement:
fine sand) (B) Convention for G.F
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
18 Brick work using hydraulically pressed 4.30 4538.10 Cmt
common burnt clay building brick having
crushing strength not less than 35 kg/sq. cm.
in super structure above plinth level up to floor
two level in cement mortar 1:6 ( 1 Cement:
fine sand) (B) Convention for F.F
19 Half brick masonary in hydraulically pressed 10.00 750.69 Smt
common burnt clay building bricks having
crushing strenght not less than less than
kg/sq. cm. in cement Mortar 1:3 ( 1 Cement :
3 coarse sand) in superstructure above plinth
level up to floor two level Conventional (GF)
20 Providing and laying Machine cut, Free 20.40 2327.55 Smt
edges, Machine polished Granite stone slab
16 to 18 mm thick Single Piece For doors
and Windows Cill and Jambs Cladding as per
design including Full moulded Round front
edge and 1 cm nosing and laid on 20 mm
thick cement mortar 1:6 (1 cement : 6 coarse
sand) and jointed with gray cement slurry
including rubbing and polishing etc. complete
21 Providing and fixing 35 mm thick shutters for 2.60 5338.30 Smt
doors, windows and clerestory windows, fully
panelled, including pressed steel door frame
conforming to IS:4351 manufactured from
commercial galvanised steel sheet of 2.5 mm
thickness conforming to IS:277 GP, including
jamb, lock jamb bead and required angle
threshold of section 50 x 25 mm, or base ties
of 20 mm x 5 mm pressed mild steel welded
or rigidly fixed together by mechanical means,
adjustable lug with split end tail to each jamb,
including butt hinges 100 mm x 58 mm x
mm with mortar guards, lock strike-plate and
shock absorbers as specified, and applying a
coat of approved steel primer and two coats
of enamel paint after pre-treatment of the
surface, including black enamelled iron
oxidised fixtures and fastenings, primer coat
of approved quality and two coats of oil
painting etc., complete.
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
22 Providing and fixing colour anodised 1.60 2019.98 Smt
single/doble shutters having standard
extruded alluminium colour anodized hollow
sections frame Equvalent to Jindal Door
section No.19552 of size 38 mm x 63.5 mm
(aproximate wt. 1.2 kg per Rmt) with wooden
inserts for Durable grip of door hinges. with
mm th. glass solid core finished with 1 mm
Lamination on Both side with S.S Handle &
other Fixtures . complete
23 Providing and fixing window having extruded 7.20 1583.95 Smt
aluminum Colour anodized section horizontal
Three track member size 92mm x 31.75mm x
1.30mm (of Jindal Section no:8688,@
Wt.1.07 Kg/mt), vertical member of size
92mm x 31.75mm x 1.50mm (of Jindal
Section no:8933,@ Wt. 1.06 Kg/mt) with
sliding shutters of horizontal member size
mmx18mm x1.29mm (of Jindal Section
no:8947@ wt.of 0.456 Kg/mt), vertical
member of size 40mm x 18mm x 1.29 mm (of
Jindal Section no:8949 @ wt.of 0.456Kg/mt/
with 5 mm thick transparent bronze colour
tinted float glass with powder coated
aluminum fittings and fixtures and transparent
silicon sealant glass fixing to frame as per
details etc.
24 Providing and fixing standared extruded of 0.40 1175.55 Smt
alluminium section of size 63mm x 38.10mm x
1.2mm (Jindal Section :2434, @ Wt.
Kg/mt) with colour Powder Coated alluminium
frame for ventilation with 5 mm thick frosted
glass as details etc complete for Ventilation
25 Providing 15mm thick cement plaster in single 197.70 215.85 Smt
coat on Rough (Similar)side of single or half
brick walls for interior plastering upto floor two
level and finished even and smooth in (ii)
Cement mortar 1:4 (1-cement :4-sand) and
Extra add for finishing with a floating coat of
neat cement slurry with all lead and lift.
26 Providing 20 mm thick gutka Finished cement 182.90 284.33 Smt
plaster on exterior brick / concrete work for
plastering comprising of base coat of 12 mm
thick cement plaster in cement mortar (1
Cement : 4 coarse sand) in rough finishing
and 8 mm thick top coat of cement mortar 1:2
(1 Cement : 2 Coarse sand) finished with
trovel including scaffolding curing etc.
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
27 P & L 24" x 24"/or as required vitrified 8 mm 82.70 1346.35 Smt
thick tile flooring over 20 mm (average) base
of cement mortar 1:6 ( 1 cement: 6 coarse
sand) on new surface or fixing on existing
flooring by adhesive material including
dismentaling of existing flooring and jointed
with color cement slurry including finised with
flush pointing & cleaning the surface etc.
complete for DARK shade/light shade.
28 Constructing Sandwitch Platform of 18 mm 0.90 4424.80 Smt
OR 16mm thick Polished Black Granite at top
and 25 mm thick Kota stone slab using
cement mortar 1:3 for sandwitch and fitting at
Bottom and edgeswith water proof regid
adhesives including making necessary
grooves in wall with Vertical Kota stone
mm x 2 No. sandwitch thick every 60 cm
center to center including all labour material of
approved quality including full moulded round
front edge fixed in wall for partition and
jointed with grey cement slurry including
rubbing and polishing etc. complate.
29 Providing and fixing M.S. grills of required 144.00 106.29 Kg.
pattern to wooden frames of windows etc.
with M.S. flats at required spacings and frame
alround, square or round bars with round
headed bolts and nuts or by screws including
cleaning brushing, two coats of primer, two
coats of oil paint etc complete. (A) Plain Grill.
30 Providing and laying broken chine mosaic 81.10 779.70 Smt
flooring for terrace using 12 mm to 20 mm
broken pieces of glazed tiles to be laid over
cement mortar 1:3 to plain or slope and to be
tempered to bring mortar creme out upto
surface using white cement including
rounding off junctions and extending them
upto 15 cm along the wall,clearing with water
and oxalic acid etc. as directed.
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
31 Providing & laying and jointing in true line and 7.00 148.12 Rmt
level 40 mm dia UPVC pipe (SCH-40) line
including fitting make or equivalent as
approved by engineer in charge the pipe
shole be fixed on wall with the hel of clam at
every two mtr center to center or shall be
conseled as direct including necessesary
fitting etc including testing of pipe and jointes
and fixin the sam with adhesive solvent
including cost of matarial (A) 40 mm OD pipe
32 Providing & laying and jointing in true line and 5.00 91.84 Rmt
level 25 mm dia UPVC pipe (SCH-40) line
including fitting make or equivalent as
approved by engineer in charge the pipe
shole be fixed on wall with the hel of clam at
every two mtr center to center or shall be
conseled as direct including necessesary
fitting etc including testing of pipe and jointes
and fixin the sam with adhesive solvent
including cost of matarial (A) 25 mm OD pipe
33 Providing & laying and jointing in true line and 5.00 72.65 Rmt
level 15 mm dia UPVC pipe (SCH-40) line
including fitting make or equivalent as
approved by engineer in charge the pipe
shole be fixed on wall with the hel of clam at
every two mtr center to center or shall be
conseled as direct including necessesary
fitting etc including testing of pipe and jointes
and fixin the sam with adhesive solvent
including cost of matarial (A) 15 mm OD pipe
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
34 Providing and fixing Wash down Water closet 1.00 4683.47 No.
wall hung type W.C. pan with integral P or S
trap including jointing the trap with soil pipe in
cement mortar 1:1 (1 cement : 1 find sand)
(A) Viterous china pattern - I (i)in white colour
With Providing and fixing 12.5 litres low level
flushing cistern with a pair of C.I. or mild
brackets complete with fittings such as lead
value less syphon 15 mm nominal size brass
ball valve with polythene float C.P. brass
handle unions and couplings for connection
with inlet, outlet and overflow pipes. 40 mm
dia porcelain enamelled flush bend including
cutting holes in walls and making good the
same conecting the flush bend with cistren
and closed Providing and fixing plastic seat
and cover for wash down water closet with
C.P. brass hinges and rubber buffers
Providing and fixing toilet paper holder (A)
C.P. brass.Providing and fixing screw down
bib taps of follwing size (B) Brass chromium
plated screw down bib tap(i) 15 mm dia
35 Providing and fixing wash basin Table TOp 1.00 1519.50 No.
with wall mounted tap with C.L. or M.S.
brackets painted white including cutting holes
and making good the same including piller tap
brass waste, stopckok and MI fisher union
fitting waste pipe:(ii) flat back wash basin
500mm x 400mm size including all nesessary
36 Providing and fixing SS Kitchen sink including 1.00 2326.66 No.
cutting holes in walls OR GRANITE and
making good the same And Required Size etc
37 Providing and fixing screw down bib taps of 2.00 186.83 No.
following size of jaquar brand product as
approved by engineer in charge (I) 15 mm
38 Providing and fixing SWR nanhi trap of the 1.00 634.17 No.
following nominal dia of self cleaning design
with C L screwed down of hinged grating
including cost of cutting and making good the
walls floos 100 mm inlet and 50 mm out let
etc complete
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
39 Providing and fixing S.W. gully trap with C.I. 1.00 1246.92 No.
grating brick masonry chamber and water
tight C.I. cover with frame of 300mm x
300mm size (inside) with standard weight.(i)
Square mouth traps.(B) 150mm x 100mm size
P or R type
40 Providing and fixing brass screw down stop 3.00 220.82 No.
tap.(C) 25mm dia.
41 Providing and fixing UPVC spigot and socket 2.00 741.01 No.
soil, waste and ventilating pipes of the
following nominal size. (B) 75mm dia.
42 Providing and fixing UPVC spigot and socket 2.00 892.39 No.
soil, waste and ventilating pipes of the
following nominal size. (B) 100mm dia.
43 Providing and fixing to wall ceiling and floor 15.00 339.05 Rmt
10.0 Kg. F/Cm2 working pressure poluthene
pipes of the following outside Dia. Low
densidy, complete with special falnge
compression type fittings, wall clipsetc.
including making good the wall ceiling and
floor.(G)110 mm
44 Providing and fixing to wall ceiling and floor 5.00 280.23 Rmt
10.0 Kg. F/Cm2 working pressure polythene
pipes of the following outside Dia. Low
densidy, complete with special falnge
compression type fittings, wall clipsetc.
including making good the wall ceiling and
floor.(F) 75mm
45 Constructing brick masonry chamber for 1.00 3660.76 No.
underground C.I. Inspection chamber and
bends with briocks having croshing strength
not less than 35Kg. Cm2 in C.M. 1:5 C.I.
cover with frame (Light duty) 455mm x
610mm intenal dimensions total weight of
cover with frame to be not less than 38Kg.
(Wt. of cover 23 Kg.) and Wt. of frame 15Kg.
) (R.C.C. top slabe with 1:2:4 mix (1-cement
:2- coarse sand :4-graded stone aggregate
20mm size) foundation concrete 1:5:10 inside
plaster 15mm thick with cement mortar 1:3
finished smooth with a floating coat of neat
cement on walls and bed concrete etc.
complete.(ii) Inside dimensions 500mm x
mm and 450mm deep for pipe line with one or
two inlets.
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
46 providing and fixing in position cowl vent to 3.00 505.17 No.
pipe (II) 100mm
47 Providing and fixing G.I. Rain water spout of 6.64 101.91 Rmt
50mm dia. and 30cm. length.
48 Applying two coats of Birla or Asian acrylic 197.70 123.56 Smt
lappy (putty) and two coats of primer & Wall
painting ( two coats) with plastic emulsion
paint of approved brand and manufacture on
wall surfaces to give an even brushing the
surface free from mortar droppings and other
foreign matter and sand papered smooth.
49 Finishing wall with weather proof exterior 182.90 73.75 Smt
emulsion paint on wall surface (two coats) to
give an required shape even shade after
thoroughly brushing the surface to remove all
dirt, and remains of loose powdered
materials.etc complete
50 Constructing Brick masonry road gully 1.00 2017.19 No.
chamber 500mm x 450mm x 600mm
including 500mm x 450mm C.I. horizontal
grating wih frame complete.
51 Constructing brick masonry chamber for 1.00 43756.23 No.
underground chamber (Kharkuva) with bricks
having croshing strength not less than 35Kg.
Cm2 in C.M. 1:5 with (R.C.C. top slab with
1:2:4 mix including Beams (1-cement : 2-
coarse sand : 4-graded stone aggregate
20mm size) foundation concrete 1 : 4 :
inside plaster 15mm thick with cement mortar
1:3 finished smooth with a floating coat of
neat cement on walls and bed concrete etc.
complete.(ii) Inside dimensions 2.00 mt. dia x
2.5 mt deep = 7.85 Cu.mt. for pipe line with
one or two inlets.
52 Providing erecting and fixing double coated 1000.00 3.95 Ltr.
Syntex PVC. (ISI) water tank of required
capacity each with all necessary fittings and
connection etc. complete on terrace.
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
53 Supplying And Fitting Electrification including 1.00 30300.00 No.
standard ISI mark Copper Wire gauge
Minimum 3/20 And Above, 18 Nos of
Lightning Point With 11 Nos Of 5 Amp &
Nos of 15 Amp, 7 Nos Of Fans, 7 Nos Of
Tube light, 7 Nos Of 25 Watt CFL Points
including electric Accessory like tube light And
Fan, Submersible Motor Under Supervision &
as Directed By Engineer in charge.
Total Rs.
Rupees Thirteen Lakh Fourteen Thousand Two Hundred ThirtyTwo and Paisa NinetyFour Only
I / We / am/are willing to carry out the work at ________________________________% above / below
percent (should be written in figure and words) of the estimated rates mentioned above. Amount of
my/our tender Works out as under.
Estimated Amount Estimated Amount
put to tender Rs. _________ put to tender Rs. _________
Deduct_______% below Add_______% Above
Net Rs._________ Net Rs._________
in words ___________ in words ___________
1 The Contractor shall exhibit a board with detailed specification and details of work as directed by
the Engineer-In-Charge for which no extra payment shall be made.
2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3 GST and Income tax TDS will be deducted at a source while making payments of bills.
4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.
G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in
R.C.C. items where there is a change as per actual mix design the cost of difference of cement
consumption have been deducted from the rate of original item at the rate of input rate
mentioned in all the tender.
Signeture of Contractor
Dy. Executive Engineer Executive Engineer
Panchayat R.&B. Sub Division Panchayat R.&B. Division
Prantij Himatnagar
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
BOQ - Prantij - Library Building At Navalpur.pdf
BUILDING WORK BOOKLET.pdf
DRG - Prantij - Library Building At Navalpur.pdf
General Specification - Building.pdf
GR - 1.pdf
GR - 2.pdf
SBD Book_2023_Prantij - Library Building At Navalpur.pdf
Specification Index - Prantij - Library Building At Navalpur.pdf
Work Details - Prantij - Library Building At Navalpur.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .