Rate contract for Repair and Rewinding of Single Phase 3 Phase induction Motor and Ceiling Fan motors for 2 Years

Hindustan Aeronautics Limited Avionics Division, Korwa Post Office : HAL The : Amethi Dist : Amethi (UP) - 227412

Name of work: "Rate contract for Repair & Rewinding of Single Phase, 3 Phase induction Motor and Ceiling Fan motors for 2 Years"

Tender No. - HAL/KWD/PM/25/SPR/214

NAME OF AGENCY (To be filled in highlighted box ) :

GST No. (To be filled in highlighted box ) :

HSN/SAC Code (To be filled in highlighted box ) :

BILL OF QUANTITIES WITH SPECIFICATIONS

The tenderers are requested to read the following before quoting:

1 The payment terms shall be governed as per the terms indicated in General conditions of contract.

2 Basic Rate to be quoted for each item.Subject work is called on works contract basis and prevailing GST of 18% has been added in the BOQ on overall total. Any revision on this GST rate is to HAL account.

3 Sucessful offer that is L-1 (Lowest offer) will be determined including GST.

4 Amount towards GST will be paid along with RAR payment against invoice.

5 The tenderers are requested to abide by the rules of prevailing GST act.

6 This BOQ specification has to be read in conjunction with technical specifications and tender drawings. Any ambiguty in these have to be brought to the knowledge of contract section before submission of tender to avoid future claims/dispute.

Repair & Rewinding of below mentioned Single Phase, 3 Phase induction Motor and Ceiling Fan motors as directed by Engineer-in-charge.

Sl. No Specification of item Quantity Unit Rate in Figs excluding GST Rate excluding GST in words Amount Excluding GST in Figs (E=C*A)

1 Rewinding of 1Ph , 230V AC, 1 HP motor 4 Nos. 0.00

2 Bearing No. 6205 of Make: SKF, NBC, FAG, ZKL, GMN for 1Ph , 230V AC, 1 HP motor 4 Nos. 0.00

3 Rewinding of 1Ph , 230V AC, 2 HP motor 8 Nos. 0.00

4 Bearing No. 6205 of Make: SKF, NBC, FAG, ZKL, GMN for 1Ph , 230V AC, 2 HP motor 8 Nos. 0.00

5 Bearing No. 6207 of Make: SKF, NBC, FAG, ZKL, GMN for 1Ph , 230V AC, 2 HP motor 8 Nos. 0.00

6 Connection plate for 1 Ph , 230V AC, 2 HP motor 6 Nos. 0.00

7 Empeller for 1 Ph , 230V, AC, 2 HP motor 6 Nos. 0.00

8 Motor cover M/c Work for 1 Ph , 230V, AC, 2 HP motor 4 Nos. 0.00

9 Motor shaft M/c work for 1 Ph , 230V, AC, 2 HP motor 4 Nos. 0.00

10 Copper Bush for 1 Ph , 230V, AC, 2 HP motor 6 Nos. 0.00

11 Gland for 1 Ph , 230V, AC, 2 HP motor 6 Nos. 0.00

12 Governer for 1 Ph , 230V, AC, 2 HP motor 4 Nos. 0.00

13 Capacitor 1 Ph , 230V, AC, 2 HP motor 8 Nos. 0.00

14 Rewinding of 1 Ph 230V AC 3HP Motor 4 Nos. 0.00

15 Bearing No 6205 of Make: SKF, NBC, FAG, ZKL, GMN for 1 Ph 230V AC 3HP Motor 4 Nos. 0.00

16 Bearing No 6207 of Make: SKF, NBC, FAG, ZKL, GMN for 1 Ph 230V AC 3HP Motor 4 Nos. 0.00

17 Connection Plate for 1 Ph 230V AC 3HP Motor 4 Nos. 0.00

18 Gland for 1 Ph , 230V AC, 3 HP motor 4 Nos. 0.00

19 Studd for 1 Ph 230V AC 3HP Motor 4 Nos. 0.00

20 Motor shaft M/c work for 1 Ph 230V AC 3HP Motor 4 Nos. 0.00

21 Motor cover M/c Work for 1 Ph 230V AC 3HP Motor 4 Nos. 0.00

22 New Copper bush for 1 Ph 230V AC 3HP Motor 4 Nos. 0.00

23 Rewinding of Pedestal Fan, / Cabin fan 14"/16" Sweep 40 Nos. 0.00

24 Bearing No. 6204 of Make: SKF, NBC, FAG, ZKL, GMN for Pedestal Fan/Cabin fan 14"/16", Sweep 40 Nos. 0.00

25 Capacitor 4Mfd for Pedestal Fan/Cabin fan 14"/16", Sweep, 40 Nos. 0.00

26 Shaft M/c work for Pedestal Fan/Cabin fan 14"/16", Sweep, 30 Nos. 0.00

27 On-off switch for Pedestal Fan/Cabin fan 14"/16", Sweep, 20 Nos. 0.00

28 Bush for Pedestal Fan/Cabin fan 14"/16",Sweep, 30 Nos. 0.00

29 Connection Plate for Pedestal Fan/Cabin fan 14"/16", Sweep, 24 Nos. 0.00

30 Rewinding of Exhaust fan 1Ph, 230V AC 12" 300mm Sweep 40 Nos. 0.00

31 Bearing No.6204 of Make: SKF, NBC, FAG, ZKL, GMN for Exhaust fan 1Ph 230V AC 12" 300mm Sweep 40 Nos. 0.00

32 Capacitor 4Mfd for Exhaust fan 1Ph 230V AC, 12" 300mm Sweep 40 Nos. 0.00

33 End cover for Exhaust fan 1Ph ,230V AC, 12" 300mm Sweep, 20 Nos. 0.00

34 Rewinding of Exhaust fan 1Ph 230V AC, 18" 450mm Sweep, 40 Nos. 0.00

35 Bearing No.6205 of Make: SKF, NBC, FAG, ZKL, GMN for Exhaust fan 1Ph 230V AC, 18" 450mm Sweep 40 Nos. 0.00

36 Bearing No.6207 of Make: SKF, NBC, FAG, ZKL, GMN for Exhaust fan 1Ph 230V AC 18" 450mm Sweep 40 Nos. 0.00

37 Capacitor 8 Mfd for Exhaust fan 1Ph ,230V AC 18", 450mm Sweep 40 Nos. 0.00

38 Shaft M/c work for Exhaust fan 1Ph ,230V AC 18", 450mm Sweep 25 Nos. 0.00

39 Connection Plate for Exhaust fan 1Ph 230V AC, 18" 450mm Sweep 25 Nos. 0.00

40 Body cover for Exhaust fan 1Ph 230V AC, 18", 450mm Sweep 25 Nos. 0.00

41 Rewinding of Exhaust fan 1Ph 230V AC, 24" 610mm Sweep 8 Nos. 0.00

42 Bearing No.6205 of Make: SKF, NBC, FAG, ZKL, GMN for Exhaust fan 1Ph 220V AC, 24" 610mm Sweep 8 Nos. 0.00

43 Bearing No. 6207of Make: SKF, NBC, FAG, ZKL, GMN for Exhaust fan 1Ph 220V AC, 24" 610mm Sweep 8 Nos. 0.00

44 Connection Plate for Exhaust fan 1Ph 220V AC, 24" 610mm Sweep 6 Nos. 0.00

45 Capacitor 8 MFD for Exhaust fan 1Ph 220V AC, 24" 610mm Sweep 8 Nos. 0.00

46 Machining work (double side) for Exhaust fan 1Ph 220V AC, 24" 610mm Sweep 8 Nos. 0.00

47 Shaft rework for Exhaust fan 1Ph 220V AC, 24" 610mm Sweep 6 Nos. 0.00

48 Body cover for Exhaust fan 1Ph 220V AC, 24" 610mm Sweep 6 Nos. 0.00

49 Rewinding of Grass Cutting Motor 1000W-1500WHP 230V, AC, 1Ph 16 Nos. 0.00

50 Bearing No. 6205 of Make: SKF, NBC, FAG, ZKL, GMN for Grass Cutting Motor 1000W-1500W 230V, AC, 1Ph 8 Nos. 0.00

51 Bearing No 6207 of Make: SKF, NBC, FAG, ZKL, GMN for Grass Cutting Motor 1000W-1500W 230V, AC, 1Ph 8 Nos. 0.00

52 New Governer for Grass Cutting Motor 1000W-1500W 230V, AC, 1Ph 6 Nos. 0.00

53 New Clutch for Grass Cutting Motor 1000W-1500W 230V, AC, 1Ph 6 Nos. 0.00

54 New connection Plate for Grass Cutting Motor 1000W-1500W 230V, AC, 1Ph 6 Nos. 0.00

55 Nut Bolt for Grass Cutting Motor 1000W-1500W 230V, AC, 1Ph 6 Nos. 0.00

56 Body cover M/c Work for Grass Cutting Motor 1000W-1500W 230V, AC, 1Ph 6 Nos. 0.00

57 Motor shaft M/c work for Grass Cutting Motor 1000W-1500W 230V, AC, 1Ph 6 Nos. 0.00

58 Kemo DC Motor 5000 RPM F190=V0.2A, A160=V3.3A (Rewinding charges) 4 Nos. 0.00

59 Rewinding of 3 Ph, 415V, 2HP, AC, Induction Motor (Squirrel Cage) 20 Nos. 0.00

60 Bearing No. 6205 of Make: SKF, NBC, FAG, ZKL, GMN for 3 Ph, 415V, 2HP, AC, Induction Motor (Squirrel Cage) 20 Nos. 0.00

61 Bearing No 6207 of Make: SKF, NBC, FAG, ZKL, GMN for 3 Ph, 415V, 2HP, AC, Induction Motor (Squirrel Cage) 20 Nos. 0.00

62 Air Fan for 3 Ph, 415V, 2HP, AC, Induction Motor (Squirrel Cage) 14 Nos. 0.00

63 Connection Plate for 3 Ph, 415V, 2HP, AC, Induction Motor (Squirrel Cage) 16 Nos. 0.00

64 Bearings Cover for 3 Ph, 415V, 2HP, AC, Induction Motor (Squirrel Cage) 14 Nos. 0.00

65 Motor cover M/c Work for for 3 Ph, 415V, 2HP, AC, Induction Motor (Squirrel Cage) 16 Nos. 0.00

66 Motor shaft M/c work for 3 Ph, 415V, 2HP, AC, Induction Motor (Squirrel Cage) 16 Nos. 0.00

67 Capacitor 200-250MFD for 3 Ph, 415V, 2HP, AC, Induction Motor (Squirrel Cage) 16 Nos. 0.00

68 Rewinding work of Ceiling Fan motor of 1200MM Sweep 600 Nos. 0.00

69 Fan Motor Shaft Machining and Grinding work (if required) 300 Nos. 0.00

70 Replacement of Capacitor 2.5MFD 500 Nos. 0.00

71 Replacement of SKF Bearings 6201( if found defective) 400 Nos. 0.00

72 Replacement of SKF Bearings 6202 ( if found defective) 400 Nos. 0.00

73 Replacement of SKF Bearings 6203 (if found defective) 400 Nos. 0.00

74 Replacement of Capacitor holder (if found defective) 200 Nos. 0.00

75 Replacement of Blade Screw (if found defective) 400 Nos. 0.00

Sub Total (Rs.) 0.00

Add GST @18% 0.00

Total amount including GST (Rs.) ₹ 0.00

Total Amount in words

Note: (i): It is a Item rate tender. Hence tenderers should quote the unit rates for all the items against the enclosed bill of quantities for making the payment as per actual work done at site. (ii): The quoted rates in the bill of quantities are inclusive of all types of taxes, duties levies, fees and charges etc., imposed by Central/ State Govt. and local bodies Compensation Cess. Labour Cess, Custom Duty, royalties and other levies. It shall also included all other costs including loading, un-loading insurance. transportation, testing and Certification expenses except GST. GST at the prevailing percentage is added in the BOQ at the end. (iii). Vendor may visit the site on any working day before submission of bid.