MAINT OF BR ASSEST MISC BR WORKS PLASTERING INCLUDING REPAIR OF DOOR WINDOW LEAKAGE AND SEEPAGE IN CERTAIN OTM ACCN IN ZONE-I RAMGARH ASCON NODES AND TECH AREA AT MIL STN JAISALMER

Amount

Taking down chowkats or frames (without taking of shutters from the frames) area not exceeding 1.5 Sqm each complete all as specified & directed by Engineer-in-charge.

Taking down chowkats or frames (without taking of shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified & directed by Engineer-in-charge.

Taking down shutters of any description not exceeding 1.00 Sqm each complete all as specified & directed by Engineer-in-charge.

Taking down shutters of any description exceeding 1.00 Sqm but not exceeding 2.00 Sqm each complete all as specified & directed by Engineer-in-charge.

Resecuring or easing and adjusting shutters of any description exc 1 Sqm and not exc 2 Sqm each without taking down of sutters complete all as specified & directed by Engineer-in-charge.

S&F in repair MS powder coated drapery rod 25mm dia decorative manner all as per sample complete all as specified & directed by Engineer-in-charge.

S&F in repair brackets powder coated fancy type suitable for drapery rod 25mm dia all as per sample complete all as specified & directed by Engineer-in-charge.

S&F box type factory made steel windows exc 1.5 sqm each with gauge shutters & glazed shutter including hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded all as specified & directed by Engineer-in-charge. Note :- To be fixed at any floor level not more than triple storey.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified & directed by Engineer-in-charge. Note :- To be fixed at any floor level not more than triple storey.

Repair of steel window shutter not exc 1.5 Sqm each by replacing projected type unserviceable hinges, with welding new hinges or welding of existing broken hinges and handles to window frames and easing of shutters to proper closing with oiling to hinges and painting at welded portion to match the existing surfaces each all as specified & directed by Engineer-in-charge.

S&F, rolled mild steel framed work as in doors or gates of angle or other section confirming to Fe 410-W (Gde E-250 quality-A) with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door, fittings and hanging, also fastering and fixing complete all as specified & directed by Engineer-in-charge.

S&F, stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperture 1.00mm and fixed with stainless steel wire staples complete all as specified & directed by Engineer-in-charge.

S&F in repair, stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperture 1.00mm and fixed with stainless steel wire staples complete all as specified & directed by Engineer-in-charge.

S & F, 35 mm thick second class hard wood factory made plain, framed, panelled shutters (Two panels), with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and Style as per IS:1003 (Part-1), kiln seasoned and chemically pressure treated all as specified & directed by Engineer-in-charge.

S&F 140mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified & directed by Engineer-in-charge.

Hacking out old broken glasses (any thickness, size, quality or description) from steel/wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified & directed by Engineer-in-charge.

All as per item No. 16 above but from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified & directed by Engineer-in-charge.

S&F in repair, 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete including welding if required for fixing in case of pressed steel chowkat all as specified & directed by Engineer-in-charge.

S&F aluminium (Die cast) door closer hydraulically regulated designation No. 3, universal type, suitable for door shutter of 851 mm to 1000mm in width and of weight between 61 to 80 Kg complete all as specified & directed by Engineer-in-charge.

S&F in repair, aluminium (Die cast) door closer hydraulically regulated designation No. 3, universal type, suitable for door shutter of 851 mm to 1000mm in width and of weight between 61 to 80 Kg complete all as specified & directed by Engineer-in-charge.

S&F safety lever lockers mild steel with 4 levers for rolling shutters complete all as specified & directed by Engineer-in-charge.

S&F, 3mm thick, sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each panes complete all as specified & directed by Engineer-in-charge. Note :- To be fixed at any floor level not more than triple storey.

S&F, 5.5 mm thick sheet glass, ordinary quality and glazing in squares exceeding 0.5 Sqm in each pane including solar control film 50 micron all as specified & directed by Engineer-in-charge.

S&F, 100mm size, butt hinges, medium weight, cold rolled mild steel including necessary welding if required all as specified & directed by Engineer-in-charge.

S&F in repair, 100mm size, butt hinges, medium weight, cold rolled mild steel including necessary welding if required all as specified & directed by Engineer-in-charge.

S&F 125mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified & directed by Engineer-in-charge.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified & directed by Engineer-in-charge.

Taking down anodised aluminium frame & shutter for door, window and ventilator complete all as specified and directed by Engineer-in-charge.

S&F, anodised aluminium frame & shutter for door, window and ventilator including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, hinges, tower bolt, etc complete all as specified & directed by Engineer-in-charge. (Note :- Floor door spring & sheet glass shall be measured and paid seperately).

S&F steel rolling shutters of 1.25 mm thickness laths without ball bearing (push pull or manual type) as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position all as directed by Engineer-in-charge.

All as per item No. 34.00 above but gear operated type with bevel gear box and crank handle.

Taking down unserviceable rolling shutter of any description any size height upto 4 mtrs complete all as specified and directed by Engineer-in-charge.

S&F ball bearing for rolling shutters complete all as specified and directed by Engineer-in-charge.

S&F in repair, 18/19mm thick prelaminated particle board/ MDF board interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete as directed by Engineer-in-charge.

S&F framed work such as grills, gratings, etc with ends of bars shouldered and / or riverted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, raillings, frame work of water tanks and similar work confirming to Fe-290 grade E-165 complete all as specified & directed by Engineer-in-charge.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with single piece extruded PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement of single piece extruded PVC profile for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified & directed by Engineer-in-charge.

S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profile with MS square tube, supplying and fixing in opening as per specifications & directed by Engineer-in-charge.

S&F 150 mm size aluminium anodised barrel tower bolts of extruded section all as specified & directed by Engineer-in-charge.

S&F 150 mm size extruded aluminium handle, fabricated type, anodiesed complete all as specified & directed by Engineer-in-charge.

M&L plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate cast in situ in lintels up to 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straigth or curved) complete all as specified & directed.

M&L for preparing new or previously untreated wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified & directed by Engineer-in-charge.

S&F for floor spring double action hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of MS heavy duty complete all as specified & directed by Engineer-in-charge.

Repair of aluminium shutter of any description and size including taking out the shutters and refixing in the same opening and easing of shutters to proper closing with oiling to hinges, floor springs etc complete all as specified & directed by Engineer-in-charge.

M&L steel door stoper double shoe fixed in door shutters all as directed fixed in repairs complete all as specified & directed by Engineer-in-charge.

S&F megnatic catch for cup board shutter complete all as specified & directed by Engineer-in-charge.

Demolition of cement concrete unreinforced in ground floors, kota stone, granite flooring, tiles flooring and pavings not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m all as specified & directed by Engineer-in-charge.

Dismentaling floor hearth or wall tiling including cement mortar bedding and removing unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified & directed.

Demolition of brick work /stone masonry built in cement mortar incl coping of any description complete all as specified & directed.

M&L squared rubble walling Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified & directed.

__ditto__ All as per Sl item No. 49.00 above, but except sotne

M&L for 75 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of flooring / hardstanding complete all as specified & directed.

M&L for 25 thick sand cushing for laying of precast concrete interlocking tiles including watering and consolidation complete all as specified & directed.

M & L for 60mm thick inter locking cement concrete mixed colour factory made paver blocks M-35 designation (compressive strength) laid over 25 mm thick sand cushion to maintain the slope including compaction with 75 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base etc. complete all as specified & directed by Engineer-in-charge.

S & F chequered cement concrete tiles 20cm X 20 cm X 25mm thk with grey cemnt and pigments,set jointed in neat cement slurry as in floors/path etc over and including 15mm thk screed bed in CM 1:4 complete all as specified & directed by Engineer-in-charge.

M&L for 25mm thk PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in subbase of floors & finishing the surface even & smooth without using extra cement complete all as specified & directed by Engineer-in-charge.

M& L for PCC 50mm thk type C1 1:3:6 (20mm graded stone aggregate laid in alternative as in plinth protection including finished the surface even and fair without using extra cement and filling the joints with mastic filling ie one part of bitumen 85/25 & 3 parts of sand by weight complete all as specified & directed by Engineer-in-charge.

M&L for non skid ceramic coloured tiles of size 300x 300 by 7mm thick joint free grade B-II (a) superior quality confirming to IS 13755 as in floors set & jointed in neat cement slurry and pointed in coloured cement to match the tiles and including scread bed or bedding layer 15mm thick in CM 1:6 complete all as specified & directed.

M&L for ceramic tiles exterior grade 300 x 300 x 10mm (Endura from Johnson or equivalent) including screed bed in CM 1:6, 15 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match all as specified and roughening of exc concrete surfaces complete all as specified & directed.

M & L for Granite (of any type) tiles18 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types complete all as specified & directed by Engineer-in-charge.

M & L glazed ceramic coloured tiles (450x300mm)x 7mm thick in dado/skirting set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in CM 1:4 etc. complete all as specified & directed by Engineer-in-charge.

M & L non skid ceramic coloured tiles exterior grade but exc 0.18 sqm and n.exc 0.38sqm (600mm X 600mm) ,8-10mm thk including scrrd bed or bedding layer 15mm thk in CM 1:6 complete all as specified & directed by Engineer-in-charge.

...ditto…. All as per Sl item No. 61.00 above, but as in skirting, steps etc in vertical surfaces with 10mm thick backing coat in CM 1:4 complete all as specified & directed by Engineer-in-charge.

S & F in repair Bib tap cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia complete all as specified & directed.

S & F in repair looking mirror 600x450mm with PVC sheet frame and back supported with 6mm thick AC building board or plywood sheet complete all as directed by Engr-in-Charge

Dismantling (corrugated , semi corrugated etc ) sheets in roof coverings complete all as specified & directed by Engineer in charge.

S&F Pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet/ semi corrugated 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified & directed by Engineer-in-charge.

Dismantling wrought iron or mild steel work of any description not othervise provided for complete all as specified & directed by Engineer-in-charge.

S & F Joist, channel,angel or tee sections, fixed independently , without connecting plates etc complete all as specified & directed by Engineer-in-charge.

Taking down cement or cement lime plaster, any description on brick or stone surfaces ofany position etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear of any plastering complete all as specified & directed by Engineer-in-charge.

M&L for rendering 15 mm thick plaster in cement mortar (1:6) on fair faces of brick work or concrete surfaces of walls and finishing the surface even and smooth without using extra cement all as specified and directed by Engineer-in-charge.

M&L for rendering 15 mm thick plaster in cement mortar (1:4) on fair faces of brick work or concrete surfaces of walls and finishing the surface even and smooth without using extra cement all as specified and directed by Engineer-in-charge.

M&L for rendering 10 mm thick plaster in cement mortar (1:3) mixed with WPC on concrete surfaces of roof top and finishing the surface even and smooth without using extra cement all as specified and directed by Engineer-in-charge. Note :- WPC will be measured & paid seperately as supply only).

M & L for plastering 5mm in CM 1:4 on ceiling / chajja complete all as specified and directed.

Preparation of old decorated existing surfaces and applying one coat of white wash on walls including in narrow width, bands, cornices, plasters etc complete all as specified and directed.

M & L for preparation of new plastered surfaces and applying three coat of white wash on walls complete all as specified & directed.

M & L for preparation of new plastered surfaces and applying three coat of white wash on ceiling complete all as specified & directed.

M & L for two coats of cement base paint over a coat of cement primer on walls complete all as specified & directed.

M & L preparation of new steel surfaces exc 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer primer complete all as specified & directed.

M & L for preparing new plastered surfaces and applying two coats of oil bound distemper over one coat of primer wall putty including preparatory to distempering on surface of walls complete all as specified & directed.

M&L for 35mm thick precast cement concrete louvers and jallies type C-0 (1:3:6) using 12.50mm graded aggregate (measured solid), including all mouldings but excluding frame, set in cement mortar 1:4 complete all as specified & directed.

M& L for plain cement concrete 1:2:4 type B 1 using 20mm graded stone agregate cast in situ kerb stone ,copings,bed plates ,water through and the like including wethering ,slightly rounded or chamfered angles and throating including use of form work (straight or curved ) set in CM 1:4 complete all as specified and as directed by Enginneer in charge

M& L for Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified & directed by Engineer-in-charge.

S.O.S.CONSTRUCTION CO.

BHAGWATI CONSTRUCTION