SPL REPAIR TO FALSE CEILING WITH FRAME OF BLDG NO T 34 AND T 119 AT MIL STN DHRANGADHRA

Amount

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth for foundation of pole,laying of cables etc in soft/loose soil and getting out complete all as specified and directed.

Returning filling in, including spreading, leveling, watering and well ramming in layer not exc 25 cm with soil obtained from excavation complete all as specified and directed.

Sand filling under floors or in foundations including watering and consolidation (50 mm thick sand cushioning) complete all as specified and directed.

Removing excvaated soil nexc 50m and depositing where directed at a level n exc 1.5 m above the stating point soil etc completed all as specified and as directed.

Supply only, integral water proofing compound complete all as specified and directed.

Supply and laying sub class burnt bricks as cable protection cover length of bricks230x115x75mm laid perpendicular to cable all as directed.

S&F welded steel wire fabric, cut to length, fixed to steel members/reinforcement steel, weigh per Sqm not exc. 4 Kg complete all as specified and directed.

M&L for 25mm thick cement concrete type B1, 1:2:4 (20mm graded stone aggregate) to receive floor finishes complete all as specified and directed.

M&L for light shade, vitrified tiles, 10mm thick (minimum) (Square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for vitrified ceramic tiles light shade 10mm thick (Square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in CM 1:3 complete all as specified and directed.

M&L for heavy duty, exterior grade ceramic tiles (Durastone of Somany/Endura of Johnson or equivalent as approved by GE) of size 300 x 300 x 10mm thick, set, jointed and pointed in neat cement slurry in trades/risers, landing with white cement and pigment over and including screed bed or bedding layer of 15 mm thick cement mortar (1:4) complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for rendering 10mm thick in CM (1:3) on fair faces of concrete surfaces of ceiling and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (plaster shall be done in two coats. 1st coat shall be 10 mm thick in CM (1:6) and 2nd coat shall be 5mm thick in CM (1:4) mixed with water proofing compound) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement mixed with water proofing compound complete all as specified and directed. (Note :- Water proofing compound shall be measured and paid separately )

M&L for rendering 15mm thick cement plaster 1:4 on stone masonry surface or surface other than fair face of brickwork surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for taking down , chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC Columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthen the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing polymer modified cement and quartz sand mortor in CM 1:3 mix , 40mm thk in two coats, using polymer SBR Latex or equivalent as approved @ 5 Ltrs per 50 Kg bag of cement complete all as per manufacturer's Specifications/instructions and as directed. Note :- (New reinforcement or Welded wire fabric) will be measured and paid separately) Make : Dr. Fixit/Sunanda/chemestik/Fosrok

M&L for preparing new plastered or un-plastered surfaces and applying three coats of white wash on ceilings complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered ceiling surfaces including brooming down or steel wire brushging, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.

Taking down cement plaster from brick or stone walls incl racking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for preparing of new plastered or un-plastered surfaces and applying two coats of oil bound distemper over a coat of primer over and including wall care putty complete all as specified and directed.

M&L for preparing of old plastered or un-plastered wall surfaces and applying one coat of oil bound distemper complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and applying one coats of cement base paint complete all as specified and directed.

M&L for complete removal of existing treatment with Mechanical Scrubber on old plastered or un-plastered surfaces of walls and applying two coats of oil bound distemper over chalk whitening, preparatory to distempering on walls complete all as specified and directed.

S&F, in repairs, false ceiling at any height, 600x600mm grid with Armstrong 'Prelude XL 32' grid system and 16mm thick mineral fibre acoustic tile 'RH-99 classic lite' with suspension system complete all as specified as per manufacturer's instruction. Make : Armstrong or equivalent as approved by GE.

M&L for preparation of old steel surface of any description exc. 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc. 15cm thickness (below or above ground level) all as specified and directed.

Taking down carefully unserviceable copper/aluminium point wiring (Light, fan, socket or power) complete including unserviceable fittings and fixtures such as switches, ceiling roses, pendents, regulators, sockets, lamp holders, brackets, except ceiling fittings, bulk head fittings, tube light fittings etc. and making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Taking down carefully unserviceable submain wiring of any type/any size removing material to store for keeping in safe custody or for taking credits and making good the disturbed surfaces of walls, floors, etc complete allas specified and directed.

M&L for wiring with and including multistranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number drawn in and including medium grade PVC casing and capping double lock type 32mm in size, fire resistant, ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes, etc. including multistranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire and including pressed steel sunken concealed terminal box with 3mm thick industrial laminated sheet cover for mounting switches, sockets and fan regulators etc. complete all as specified and directed for the following :- Make of Cable Polycab/Finolex/Havells

(a) One light/fan point controlled by one switch

(b) One light point controlled by two, 2-way switches.

(c) One 3 pin, 5 Amps, socket outlet on the same board controlled by another switch.

(d) One multi pin 5 Amps, socket outlet on Independent board.

(e) One bell/buzzer point controlled by one push buttons independent

M&L for wiring with and including multistranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number drawn in and including medium grade PVC casing and capping double lock type 32mm in size, fire resistant, ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes, etc. including multistranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire and including pressed steel sunken concealed terminal box with 3mm thick industrial laminated sheet cover for mounting switches, sockets and fan regulators etc. for one 3 pin, 15 Amps socket outlet point on independent board complete all as specified and directed. Make of Cable Polycab/Finolex/Havells

M&L for wiring with and including multistranded copper conductor 4 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number drawn in and including medium grade PVC casing and capping double lock type 32mm in size, fire resistant, ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes, etc. including multistranded copper conductor 4.0 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire and including pressed steel sunken concealed terminal box with 3mm thick industrial laminated sheet cover for mounting switches, sockets and fan regulators etc. for one 3 pin, 15 Amps socket outlet point on independent board complete all as specified and directed. Make of Cable Polycab/Finolex/Havells

S&F, lamp holder insulated body with back plate for battern fittings complete all as specified and directed.

S&F, in repair, switch piano, flush button single pole, one way 5 Amps complete all as specified and directed.

S&F, switch piano, flush button, single pole, one way 15 Amps complete all as specified and directed

S&F , modular switch 1 way 10A, 1 module complete all as specified and directed. Make of Anchor(Roma) or equivalent make Legrand/ Havell /ABB.

S&F , modular switch 2 way 10A, 1 module complete all as specified and directed. Make of Anchor(Roma) or equivalent make Legrand/ Havell /ABB.

S&F, Ceiling rose, PVC/poly carbonate,isolated body three terminals,complete all as specified and directed.

S&F, socket outlet, 2 in 1, 3 pin, 15 Amps and 5 Amps flush type complete all as specified and directed

S&F Socket outled, 2-in-1, 3 pin, 6 Amps, flush type 230 Volts complete all as specified and directed.

S&F, miniature circuit breakers, type curve ‘B’ , 10 KA, SP, 6 to 32 Amps complete all as specified and directed.

S&F, in repairs, miniature circuit breakers, Single pole and neutral, type curve ‘C’ 10KA, 32 Amps 230 Volts. complete all as specified and directed.

S&F, miniature circuit breakers, Single pole and neutral, type curve ‘C’ 10KA, 40 Amps 230 Volts. complete all as specified and directed.

S&F, MCCB Three pole and neutral, curve 'C', 10 KA, 63 Amps, 415 Volts complete all as specified and directed.

S&F, LED Adore Lamp, 14 W, B22 base, 6500K CDL type complete all as specified and directed by Engineer-in-Chargeand.

Taking down carefully old unserviceable main switches/distribution board any type including fuses MCB etc after removing all connection and making good the disturbed surface complete all as specified and directed.

S&F, crystal galss LED tube light fitting of 1X18W with tube rod of 18 W, T-8, 220 V, AC decorative box type 4ft. (double side connection with LED driver) with very high efficacy complete all as specified and directed by Engineer-in-Charge.

S&F, in repairs, bell, A.C. 230 Volts, single pole, Ding doll, complete all as specified and directed.

S&F , in repairs, modular socket 10 Amps, 2/3 pin combined, 2 module complete all as specified and directed. Make of Anchor(Roma) or equivalent make of Havells/ legrand.

S&F, modular switch 1 way 20A, 1 module complete all as specified and directed. As per Cat No. 21066 of Anchor(Roma) or equivalent make Legrand/ Havell /ABB.

S&F, in repairs, modular socket 20A, 2/3 pin combined, 2 module complete all as specified and directed.Make of Anchor(Roma) or equivalent make of Legrand/ Havells.

S&F, in repairs, modular bell push 6 Amps, 1 module complete all as specified and directed. Make of Anchor(Roma) or equivalent make of Legrand/ Havells.

S&F, in repairs, modular fan step type regulator, sutabule for 1200/ 1400mm sweep, 1 module complete all as specified and directed. Make of Anchor(Roma) or equivalent make of Havells.

S&F , modular white cover plate with frame for 1/2 modules complete all as specified and directed

S&F, modular white cover plate with frame for 3 modules complete all as specified and directed

S&F, modular white cover plate with frame for 4 modules complete all as specified and directed

S&F, modular white cover plate with frame for 6 modules complete all as specified and directed

S&F, modular white cover plate with frame for 8 modules complete all as specified and directed

M&L for GI tubing light grade laying for protection of LT under ground cable of size 40mm bore laid in treanches complete all as specified and directed.

S&F, modular white cover plate with frame for 12 modules complete all as specified and directed

S&F, modular metal flush box concealed type with 1/2 module for housing modular switches complete all as specified and directed

S&F, modular metal flush box concealed type with 3 module for housing modular switches complete all as specified and directed

S&F, modular metal flush box concealed type with 4 module for housing modular switches complete all as specified and directed

S&F, modular metal flush box concealed type with 6 module for housing modular switches complete all as specified and directed

S&F, modular metal flush box concealed type with 8 module for housing modular switches complete all as specified and directed

S&F, modular metal flush box concealed type with 12 module for housing modular switches complete all as specified and directed

Taking down the existing ceiling fans complete with down rods and refixing the same with supply of new down rod of size 15 mm dia made of GI pipe med grade aprox 1 metre length incl flexible wire all as specified and directed.

Supplying & laying, XLPE insulated, PVC inner sheathed, armored with galvanized steel strip or wire heavy duty underground cable with aluminium multi stranded conductor, 1100 volt grade of size 35 Sqmm 3.5 core, laid in trenches/duct, passing through pipe/duct or fixed on pole and connecting and testing complete all as specified and directed.

S&F, in repair, Distribution Board Power line VTPN , 4 way, 415 volts, factory made powder coated, double door with neutral and earth link, including with 3 pole MCCB 250 Amps rating ,10KA breaking capacity for incoming supply and 12 Nos single pole MCBs for out going supply complete all as specified and directed.

S&F, sheet metal enclosures, single pole & neutral with a two pin & earth plug and socket complete with one single pole, MCB of 20 Amps, 10 KA, 240 volts complete all as specified and directed. Make ;Legrand / Havells/ standard.

S&F, in repairs, sheet metal distribution board, SPN, 8 way 240 Volt, double door factory made and tested complete, protection class IP-42 suitable for mounting MCBs, isolator with 200 A tinned copper bus bar complete all as specified and directed

S&F, sheet metal distribution board, SPN, 12 way 240 Volt, double door factory made and tested complete, protection class IP-42 suitable for mounting MCBs, isolator with 200 A bus bar complete all as specified and directed. Make ;Legrand / Havells/ standard.

S&F, sheet metal distribution board, 3 phase with neutral ( TPN ) of 4 way 415 Volt, double door factory made and tested complete, protection class IP-42 suitable for mounting MCBs, isolator with 200 A tinned copper bus bar complete all as specified and directed

S&F, in repairs, LED light fitting, batten type, housed in extruded from powder coated aluminium, 18 watt for soft diffuser lighting with and including lamp and connecting up complete with white PVC insulated and PVC sheathed round flexible three core copper conductor cable of suitable size and testing on completion all as specified and directed. Make: As per Cat No. BAJAJ LED BATTEN 18W of Bajaj or equivalent make : Havell / wipro/ philips.

S&F, in repairs, LED light fitting, batten type, housed in extruded from powder coated aluminium, 9 watt for soft diffuser lighting with and including lamp and connecting up complete with white PVC insulated and PVC sheathed round flexible three core copper conductor cable of suitable size and testing on completion all as specified and directed. Make: As per Cat No. BAJAJ LED BATTEN 9W of Bajaj or equivalent make : Havell / wipro/ philips.

S & F LED 24 watt surface mounting 2 x 2 luminaire of 24 watt, white powder coated CRCA housing with highpower LEDs. Aluminium front frame with flat white high transmission acrylic cover prewired and all accessories complete all as specified and directed.

S & F LED 24 watt recess mounting 2 x 2 luminaire of 24 watt, white powder coated CRCA housing with highpower LEDs. Aluminium front frame with flat white high transmission acrylic cover prewired and all accessories complete all as specified and directed.

S&F, flat 2' x 2' Panel 36 Watt LED fitting with LED prisumatic optival modular luminaire suitable for recesses mounting complete with HF electronic driver complete all as specified and directed.

S&F, 30W New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having top opening separate dirver compartment with IP-66 protection and impact resistance of IK-07 for bldg security light with GI pipe bracket of suitbale size for fitting complete all as specified and directed by Engineer-in-Charge.

S&F, security light luminaries 25 watt with wall mounting bracket of suitable size and clamps, nut bolts etc.having pressure die cast housing with epoxy power coated dark graphite grey colour finish, prismatic polycarbonate cover with individual LED lenses-IP65 prewired Conforming to Crompton or of equivalent make of wipro/Havells/Philips wipro

S&F of Exhaust fan 250 mm Sweep, Metal body alongwith louvers Metalic Grey colour complete suitable to work on AC, single phase, 230 Volts, 50 Hz supply complete with blade including provision of suitable bolts, nuts, washers and grouting on walls and making good the disturbed surfaces to match with the existing surface including making good and rubbish off the premises providing Nut bolt for mounting of Exhaust fan complete all as specified and directed.

S&F of Exhaust fan 300 mm Sweep, MS body heavy duty, AC single phase, 230 Volts, including connection with 0.5 sqmm multistranded copper conductor felxible wire from ceiling rose, necessary fixing arrangement i.e. anchor nut bolt, washer and grouting and making good to disturbed surface complete all as specified and directed.

S&F of Exhaust fan 450 mm Sweep, MS body heavy duty, AC single phase, 230 Volts, including connection with 0.5 sqmm multistranded copper conductor felxible wire from ceiling rose, necessary fixing arrangement i.e. anchor nut bolt, washer and grouting and making good to disturbed surface complete all as specified and directed.

M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and directed.

M&L for ceiling rose, PVC/poly carbonate, isolated body three terminals complete all as sepcified and directed.

M&L in replacement sub-main wiring with 2 single core 4 Sqmm PVC insulated, unsheathed, 1100Volts grade, copper multi stranded conductor drawn in and including PVC concealed conduit and conduit assessories including drawing a run of PVC insulated, unsheathed, 650/1100Volts grade, copper conductor multi stranded 4 Sqmm size as continuous earth wire drawn through and connected to main switch/ DB and testing on completion. Note: (i). 2 run of main conductor and one run of earth conductor shall be measured as one length. (ii) Rates quoted shall be inclusive of cutting wall for concealing conduit and making good the same in cement mortar 1:3.

S&F, in repairs, sub-main wiring with 4 single core, 4 Sqmm PVC insulated, unsheathed, 1100 Volts grade, FRLS, copper multi stranded conductor drawn in and including PVC casing and caping of 32mm size including drawing 2 run of PVC insulated, unsheathed, 1100 Volts grade, FRLS, copper conductor multi stranded, 2.5 Sqmm size as continuous earth wire drawn through and connected to main switch/DB and testing on completion complete all as specified and directed. Note: 4 runs of main conductor, one run of earth conductor and one run of PVC casing and caping shall be measured as one unit length. Make of Cable Polycab/Finolex/Havells

S&F, in repairs, sub-main wiring with 4 single core, 6 Sqmm PVC insulated, unsheathed, 1100 Volts grade, FRLS, copper multi stranded conductor drawn in and including PVC casing and caping of 32mm size including drawing 2 run of PVC insulated, unsheathed, 1100 Volts grade, FRLS, copper conductor multi stranded, 2.5 Sqmm size as continuous earth wire drawn through and connected to main switch/DB and testing on completion complete all as specified and directed. Note: 4 runs of main conductor, one run of earth conductor and one run of PVC casing and caping shall be measured as one unit length. Make of Cable Polycab/Finolex/Havells

M&L for earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth Lead 4 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I connected to earth test point using earth strip of 25x4mm as earth lead all as specified and testing on completion including provision of earth lead protected by 40 mm dia light grade GI pipe & watering pipe shall be 20 mm bore medium grade GI pipe including all excavation and earth work in any type of soil, PCC pit with RCC cover, char coal, salt, funnel etc complete. Note : Rate quoted by tenderers shall be deemed to include for following provisions:-[i]. Excavation & earth work in any type of soil including removing of surplus material upto 50 M.[ii]. PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles.[iii]. Main earthing lead from earth electrode to test point upto 7.5 mtr.[iv]. Funnel with watering pipe [GI pipe] 20mm bore [ISI marked] medium grade & copper lugs, charcoal & salt as reqd.[v]. GI protection pipe of size 40 mm bore light grade 7.5m.

Singh Engineer And Contractor

Ramdev and Sons

BHAVIK SUPPLY CORPORATION