Health and family Welfare Department Annual Plan 2021-22 Govt Medical College Thiruvananthapuram Renovation of UG senubak gakk attached to General Medicine Department of GMCT

Amount

Civil works

14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)

od6428/2020_2021/BL:Repairs to bottom of RCC works of thickness 20 mm to 40 mm in patches , including cutting the patch in proper shape, cleaning the reinforcement from rust, pasting coarse aggregate using cement grout in one or more steps in one day inter val and plastering with cement mortar 1:4 two or more steps for obtaining level surface including disposal of rubbish to the dumping ground within 50 meters lead etc. complete using cement mortar 1:4 (based on 14.1.2)

od6385/2020_2021/BL:Finishing walls with Acrylic Smooth exterior paint (Asian Paints- Apex/ Berger Paints - Weathercoat or equivalent) of required shade:<br>New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

od6386/2020_2021/BL:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item): (Based on 21.3.1) With frosted glass of 4.0 mm thickness

9.48.2:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc

10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

od6420/2020_2021/BL:Providing and fixing 4 mm thick aluminium composit panel 4mm thick in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

od6424/2020_2021/BL:Carpenter engaging for wood work

B V Prakash

ANILKUMAR S

Bidder Name

B V Prakash

HARIKUMAR

ANILKUMAR S