Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹25,000
Closing Date
6 Feb 2026, 6:00 pmClosed
Similar tender results from the same govt authority in the past 3 years.
CHIEF OFFICER NAGAR PALIKA BODELI
BID DOCUMENTS FOR REPAIRING WORK YEAR 2026 27 AT BODELI NAGARPALIKA DIST CHHOTAUDEPUR UNDER THE GRANT OF NAGARPALIKA SELF FUND
270452
509/2026
Open
Civil Works
Chhota Udaipur
13 documents required · 13 mandatory
₹1,062
Yes
The Chief Officer, Bodeli nagar palika, Bodeli.
₹25,000
Yes
29 Jan 2026
29 Jan 2026
29 Jan 2026
6 Feb 2026
29 Jan 2026
Scarifying gravelled macadam or bitumen macadam surface 6 cm to 10 cm.depth including stacking useful materials on road side and disposing off remaining stuff.
Demolition including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. (i) R.C.C. work (ii) R.C.C. work
Providing and Supplying Quarry Spell Including Collection Carting. Staking & Spreading.ouary spell on road site including all labour & machinarys(Jcb Tractore etc) taxes and etc complete.
Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6- crushed stone aggregates 40 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth
Providing and laying controlled cement concrete Work M200 and curing complete excluding the cost of formwork and reinforcement of reinforced concrete work
Providing Thermo mechanically treared bars (TMT Bars) FE 500/500D reinfocement for R.C.C. work including cutting, bending, binding and plaching in position complete for all fioor.
Providing and laying M.S side rail of road thickness with necessry nut boit plates, fixing as per width applaying plates vibrator, electric or diesel on channel comp. with V.D systems (trimix) by using the necessary equipments 7 material & machinery, such as running screed vibrator on prelaid M.S channel for leveling vaccum pumps, floting &power trowling etc. compl. also including gruv cutting and filling joint with bituminous every 5 mtr. (ind hardner)
Providing and laying completed WBM grade II with BT crushed metal of size 40mm to 63mm including using 20 stone screening grit 0.16 cum and stone dust 0.08 cum as filler incuding for spreading watering consolidation by vibrator power road roller 8 tone to 12 tone etc complete as per morth clause 404
Providing and laying W.M.M. mm thick with M.C BT chips as per required gradation mixing with required optimum quantity of water including spreading watering consolidation using power and rolier etc.complete.
Preparing surface by Brushing with wire brushes for removing caked mud etc. Air compresor/sweeping with brooms and finally fanning the cleaned surface with gunney bags to remove all loose dirt etc.(ii) Black top/ cc surface.
Providing and laying Bitumenous grout compacted with VG 30 asphalt 60 70 grade at the tare of1.99 PERCANTAGE by weight of total mix for mixing and tack coat at 2.5kg 10spm, emulsion on BT surface using B.T chips of required gradation including cleaning and heating the aggregate and asphalt by continuous batching of drum mix plant and spreding the same by paver finisher one layer and consolidation with vibratory rollar and power rollar including providing all materials, equipment, tools and plants, oil, kerosene, firewood, labour charges etc. coreplete using contractor own machmaries drum mix plant and parver finisher etc complete
Providing and laying 37.5mm thick B.M with BT Aggregate as per M.O.RT & H specification and VG 30 asphalt Grade 60 70 for tack coat 2.50kg 10 sm and mixin 34.00kg MT i.e. 3.40 by weight of total mix including heating the aggregate and asphalt in contonuous batching drums nis plant and spreading the same by paver finisher & consolidation with vibratory rollar including providing all materials equipments, tools and plants, fire wood, oil. kerosene, labour charges etc. complete using contractor own machinary drum mix plant and paver finisher etc, complete.
Providing and laying 25mm thick S.D.B.C with BT Aggregate as per M.O.R.T and H. specification and VG 30 asphalt grade 60 70 mixing at 50 kg MT i.e.5.0 By weight of total mix including heating the aggregate and asphalt in continuous batching drum mix plant and spreading the same by paver findsher and cooonsolidation with vibratory rollar including providing all matenals equipments, tools and plants, fire wood, oil, kerosene, labour charges etc. complete using contractor own machinary drum mix plant and paver finisher etc, complete.
Providing and Laying asphalt painting on BT surface with bitumen VG-30 @ rate 5 kg. per 10 smt by mechanical sprayar and spreding the stone dust on 0.030 cmt/ 10smt and rolling with smooth wheeled and penuriatic roller and brushing etc. completed.
Providing and laying of hot applied Thermoplastic compound 2.5 mm thick including Reflectorising glass Beads 250 gms. Per sqm area , thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 finished surface to be level. Uniform and free from streaks and holes. ( as per government letter no.SOR 102003/94/S-1/Dated. 20-7-2004)
Supplying cold mix asphalt for road repaire as required by nagar palika Per bag rate
Excavation for foundation up to 1.5 M Depth including sorting out and stacking of useful materials and disposing of the excavated stuff up to 50 meter lead (A) Loose or soft soil
brick work using common burnt clay building bricks having crushing strength not less than 35 kg.-sq.cm.in foundation and plinth in cement mortar 1:6 ( 1-cement: 6 -fine sand ) (B) convention (upto 10 ton)
Providing 10 mm. thick cement plaster in single coat on brick/concrete walls for interior plastering up to floor two level and finished even and smooth in.(I) cement mortar 1 : 3 (1 cement : 3 sand)
Distempering (One coat) with oil bound washable distemper of approved brand and of required shade on wall surface to give an even shade, after thoroughly brushing the surfaces clean of all grease, dirt, loose pieces of scales and also including distempering with oil bound washable distemper of preparing the surface even & smooth.
Providing and laying (to level or slopes) and jointing reinforced concrete light duty non-pressure pipes I.S. class NP-2 of the followings internal diameter with collars and butt ends prepared for collar joints including testing of joints complete. (D) 300 mm ( more than 10 ton)
Providing and laying (to level or slopes) and jointing reinforced concrete light duty non-pressure pipes I.S. class NP-2 of the followings internal diameter with collars and butt ends prepared for collar joints including testing of joints complete. (E) 450 mm. ( upto 10 ton)
Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 63.50 x 38.10 x 1.95 mm (of Jindal Section no:4605,@ Wt 1.094 Kg / Rmt), horizontal two track member size 61.85 mm x 31.75 mm x 1.20mm (of Jindal Section no: 8687 @ wt.of 0.695 Kg/mt), vertical member of size 61.85 mm x 31.75mm x 1.30 mm (of Jindal Sectio no:8758 @ wt.of 0.0.659 Kg/mt) with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt), vertical member of size 40mm x 18mm x 1.29mm (of Jindal Section no : 8947 @ wt.of 0.456Kg/mt/ Section 8948, @ Wt. 0.457 Kg/mt) with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc complete for window.
Constructing brick masonary chamber for underground C.I Inspection chamber and bends with bricks having crushing stregth not less then 35 kg/cm2 in c:m 1 :5 C.I. cover with frame (light duty) 455 mm x 610 mm internal dimensions total weight of cover with frame to be not less than 38 Kg .(wt. of cover 23 Kg.) and wt.of frame 15 Kg. ) ( R.C.C. top slabe with 1:2:4 mix ( 1: cement :2 coarse sand : 4 graded stone aggregate 20 mm size) foundation concrete 1:5:10 in side plaster 15 mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete. (i) in side dimensions 455mm x 610 mm and 450 mm deep for single pipe line. ( upto 10 ton)
RCC precast M.H.Frame & cover manufacture supply & delivery at store or at site of work precast RCC M200 Frame & cover suitable to drainage M.H. and as per type design & drawing including cost of reinforcement m.s. angies or flat,curing mold work etc. (Heavy Duty - Frame suitable for 50cm opaning of mh
RCC precast M.H.Frame & cover manufacture supply & delivery at store or at site of work precast RCC M200 Frame & cover suitable to drainage M.H. and as per type design & drawing including cost of reinforcement m.s. angies or flat,curing mold work etc. (Heavy Duty - COver suitable for 50cm opening of mh
Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with M.S. flats at required spacings and frame alround, square or round bars with round headed bolts and nuts or by screws (A) Plain Grill.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
SBD SECTION-5 TECHNICAL SPECIFICATION.pdf
SBD SECTION-6 FORM OF BID.pdf
SBD SECTION-7 BILL OF QUANTITIES.pdf
SBD SECTION-8 SECURITIES AND OTHER FORMS.pdf
SBD SECTION-9 DRAWING.docx
DOCX
SBD SECTION-10 DOCUMENTS FURNISHED BY BIDDER.pdf
BOQ ItemRate_1(79).pdf
GENERAL INSTRUCTIONS TO BIDDERS.pdf
Notes.pdf
Required Attachment Form as Per Bid Evaluation Criteria.pdf
OTHER IMPORTANT-1.pdf
OTHER IMPORTANT-2.pdf
OTHER IMPORTANT-3.pdf
SBD SECTION-1 TO 4.pdf
Download all tender documents and submit your bid