ELECTRIFICATION OF SC OFFICE AND HEALTH SECTION IN MAIN OFFICE BUILDING

Amount

Supply and wiring points according to IS 732-1989 using rigid PVC ivory Conduit of minimum size 20mm conforming to IS 9537 Part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm PVC insulated stranded single core FR copper conductor cable 650V grade including providing switch board main and continuous earthing with 1.5 sqmm green coloured FR wire required quantity of copper earth socket, brass bolt and nuit crimping etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type ROHS compliant SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (Group B) modular accessories

Single control light point with 6A, 3Plate ceiling rose

Single control ceiling fan point without ceiling rose

Single control ceiling fan point with 6A.3 plate ceiling rose and with socket typped electronic regulator.

Combined plug point with 6 A, 5 pin plug socket controlled by 6 A switch in the same switch board as that of light points.

Independt plug

Supply conveyance, installation, testing and commissioning the following types of light fittings made from CRCA sheet 0.5mm thickness with all accessories and lamps directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connections with required legth of 16/0.20 mm 3 cor PVC insulated and sheathed round copper conductor flex wire conforming to relevent ISS and giving connections as

1200 mm 1x20 W LED with box type fixtures

Supply conveyance, installation, testing and commissioning (Havells/Philips/Bajaj) make recessed mounted, copmact vertical, round shaped down lighter with removable driver suitable for low ceiling lights 15W LED 4000K(white)

(90.4.5.2) Supply conveyance, installation, testing and commissioning of ceiling fan of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100 V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required. 1200mm sweep 5 star rated

Supply and renewing the following accessories in place of damaged/faulty ones of existing ceiling fan and giving connection.

Step fan regulator-socket size

Fan condencer

Ball bearing

TVS nut and bolt

Cotter pin /split pin

Dismantling the existing ceiling fan, scraping, cleaning overhauling and greasing the bearings, reassembling testing and painting with 2 coats of synthetic enamal paint, over a coat of red oxide primer re-fetting the same in position and giving connections and make the fan in good working condition etc as required

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exeeding 60 cms, making good the damages, colour washing etc. required.

4 core 25 sq mm with factory made clamp

Supply and drawing bare copper conductors of the following sizes along with wiring cables and giving connections etc as required.

3.15 mm bare copper conductor (10 SWG)

2.00 mm copper conductor (14 SWG)

Supply and fixing the following sizes of PVC Conduit (Medium) conforming to IS 9537/ 1983 Part III along with all required accossories on surface including making good the damages etc as required.

20 mm dia light gauge.

32 mm dia light gauge.

Supply and drawing 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1964 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.

1.50 sqmm 2 run

1.50 sqmm 3 run

1.50 sqmm 6 run

2.50 sqmm 3 run

4.00 sqmm 2 run

4.00 sqmm 3 run

4.00 sqmm 4 run

Supplying & Drawing the following types of UTP Cable conforming to relevant standards through the existing conduit and giving connections as required.

Cat 6 UTP Cable

Supplying & drawing unarmored PVC insulated and PVC sheathed copper conductor Telephone Pair Cable conforming to ITD specification for indoor application through the existing conduit.

Supply of 19" 6U wall mounted Network Rack with front door, rear steel door, 600 x 600 mm, AC power supply horizhontal with 6A sockets 1 fan earthing kit including all accessories related to installation

24 port Gigabite (10/100/1000) switch (DGS-1024C)

D-Link surface mount box

D-Link information outlet Cat 6

D-Link Faceplate single

Sunrack Rack 4U without Accessories

D-Link RJ connector

Supply and fixing the following types of boxes suitable for modular accessories in surface/recess incliding making good the damages, colour washing etc. as required.

12 module metal box in recess

8 module metal box in recess

3 module moulded plastic box on surface

2 module moulded plastic box on surface

Supply and fixing the following type/sizes of front plate on the existing modular boxes (RoHS)

12 module white/off white

8 module white/off white

3 module white/off white

2 module white/off white

Supply and fixing the following modular switches and accessories in the existing front plate and giving necessary connections as required (Group B)

6A SP one way switch

6A Univerala socket

16A SP one way switch

20A SP one way switch

RJ 11 Telephone Jack with shutter

Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper/ brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall, making good the damages, colour washing etc. as required.

4 (8+12) three phase double cover (IP 42/43)

10 way single phase double cover (IP 42/43)

DP enclosure for independent mounting of MCB

Supply and installation of the following accessories suitable for 50 Hz Ac supply conforming to IS 8828-1995/IEC 60898 of the following current ratings in the existing enclosure and giving connections as required

63a,415v,50hz,ac 23A duty,4 poles switch disconnector unit

40 A double pole mini break isolator

63A, 2 pole, 30 mA RCCB

63A, 4 pole,100 mA RCCB

40A, 10kA, TP MCB (C Curve)

6-32A (C Curve)

Supply and conveyance installation testing and commissioning of single phase air conditioners of following types conforming to relevant IS fitted with hermitically sealed comporessor operation on refigerant R-22/nn CFC refigerent suitable for operation on 230V, 50 Hz single phase A/C supply capable of performing functions a) Cooling, b) Dehumidifying c) Air circulating d) Filtering

1.5 TR High wall mounting split type (invertor type) M/S O General make or equilant make`

Charges for conveyance installation testing and commissioning of single phase 1.5 TR A/C unit

Supply 4 KVA Voltage stebilizer for split type AC unit with Voltage Range 175-275 V and out put range of 210-240 V (Guard equivalent make)

Supply and providing the following size soft drawn copper pipe for extending the pipe between out door and indoor unit, including insulating the pipe using rubbrised form sleeve 10mm thick, brazing leak testing etc, (for extending length of pipe beyound standard length supplied with the 16 mm (5/8) dia, 22 guage soft drawn copper 10 mm thick rubberised form sleeve.

Supply and providing brackets

S & F switch disconnector unit (isolator) complete with handle assmebly, door inter lock and padlocking arrangement of the following ratings

100A, AC 23 A, TPN SDF for DIN fuse

Supply and fixing the following accessories in the existing meter board and giving connections etc.

100 A, 415 V, DIN type fuse base

100 A, 415 V, Backelite fuse base

100 A, 415 V, 2 way neutral link mounted on DMC/SMC base.

SHAMEER K