Installation of Additional 100 KVA Transformer at various site of Ekta Feeder, Uppal Tower Feeder and IT Park 2 under EDSD, IT Park under EDD, Raipur.

Total amount of the "Rate Schedule" sheet

SCHEDULE OF QUANTITY AND RATE FOR INSTALLATION OF ADDITIONAL 100 KVA TRANSFORMER AT VARIOUS SITE OF EKTA FEEDER, UPPAL TOWER FEEDER & IT PARK 2 UNDER EDSD, IT PARK UNDER EDD, RAIPUR AGAINST E-TENDER SPECIFICATION NO. 87/EDCRDDUN/2025-26

1- Est.No.-1(IR.SR2503392)- Construction of Additionl 100 KVA T/F at various site of Ekta Vihar Feeder. 2- Est.No.-2(IR.SR2503394)- Construction of Additionl 100 KVA T/F at various site of Uppal Tower Feeder. 3- Est.No.-3(IR.SR2503379)- Construction of Additionl 100 KVA T/F at various site of IT Park-2.

Name of The Bidder's Firm:

Part [A] (Supply Portion)

LT XLPE Cable 1x50 sqmm

Total - Part [A]

Part [B] (Labour Portion)

Carriage of following type of Material from store centre/JE store to site of work distance approximate 0-20 km. With loading & unloading complete: -

e) Stock Material

Head load cartage of following material from road to site (0-1 Km)

e) Stock Material

Excavation of earth for pole pit of size 0.9x0.6x1/6 of full length of pole for erection of pole in all type of soil including proper dressing of sides and ramming of bottom including getting out the excavated soil and disposal of surplus excavated soil as directed complete work

Erection of following Single support pole in proper level and alignment alongwith fixing of all accessories, like top channel & clamps as per RESPO construction Manual.

Erection of following Double support pole in proper level and alignment alongwith fixing of all accessories, like top channel, X-bracing & clamps as per RESPO construction Manual.

Grouting of pole in size 0.45x0.45x1/9 of the support in CC ratio 1:4:8 (1 cement : 4 graded stone 20mm nominal size : 8 coarse sand ) block including cost of Cement,sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, leveling as per RESPO construction Manual.

Fabrication of M.S. Channel Angle iron after cutting in required sizes with drilling of holes upto good finish for top channel, bracing and special type bracket etc as per RESPO sehedule and local approved drawing.

Layiing of ACSR Rabbit Conductor in HT Line

Dismantling of LT Line 3 Phase 4 wire (ACSR Weasel conductor)

Laying of LT XLPE AB cable 3x120+1x95+1x16 sq mm

Laying & Fixing of LT XLPE cable

Total - Part [B]

TOTAL [Part-(A) + Part (B)]

Place

Please Enable Macros to View BoQ information