Minor repairs and maintenance of wharf structures inside the security compound wall for the year 2019-20-Re-tender

Amount

BOQ Particulars

KSRRB M200-14.2 : Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T & P and scaffolding wherever necessary, sorting the dismantled materials, disposal of unserviceable materials, stacking the serviceable materials, providing and removing scaffolding wherever necessary cost of all labour charges complete as per specifications. Specification No. KRBS 200-2 MORTH Specification No. 202 Brick/Tile work-B in cement mortar

KSRRB M200-12.3 Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T & P and scaffolding wherever necessary, sorting the dismantled materials, disposal of unserviceable materials and stacking the serviceable materials, with all lifts and lead up to 1000m complete as per specifications. Pre stressed / Reinforced Cement concrete grade M20 & Above MORTH specification No:202

KSRB 2-2.1: Earthwork excavation by manual means for foundation of buildings, culverts, water supply, sanitary lines and electrical conduits etc, either in pits or in trenches 1.5m and above in width, in ordinary soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50m including breaking of clods complete as per specifications. KBS 2.1(a) / 2.3.5

KSRRB M300-14: Excavation for road work in Soil with Hydraulic Excavator of 0.9 cum bucket capacity including cutting and loading tippers, trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections and transporting to the embankment location to a lead of 1 Km and complete as per specification MORTH Specification No. 301

KSRB 2-4: Refilling available earth around pipe lines, cables in layers not exceeding 20cms in depth, compacting each deposited layer by ramming after watering with lead upto 50m and lift upto 1.5 m. including cost of all labour complete as per specifications.

KSRB 5.2-2 : Providing and constructing granite / trap / basalt size stone masonry in foundation with cement mortar 1:8, stone hammered dressed in courses not less than 20 cms high, bond stones at two m. apart in each course including cost of materials, labour, curing complete as per specifications. KBS 5.1.13

Construction of laterite size stone masonry in C.M 1:6 using available stones, including cost and conveyance of materials curing etc complete as per specification IS 3628/1979 having compressive strength 35N/mm2 For Super Structure in C M 1:6 (Cement = 45Kg)

KSRB 6-1.3: Providing and constructing burnt brick masonry for basement and superstructure with approved quality of non-modular bricks of standard size of class designation 35n/mm2 with cement mortar1:6 including cost of materials, labour charges, scaffolding, curing complete as per specifications Specification No. KBS 6.2.

KSRB 4-1.7: Providing and laying in position plain cement concrete of mix 1:3:6 with OPC cement @ 220 kgs with 20mm and down size graded granite metal coarse aggregates @ 0.84cum and fine aggregates @ 0.56cum machine mixed, concrete laid in layers not exceeding 15 cms thick, well compacted, in foundation, plinth and cills, including cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification No. KBS 4.1, 4.2

KSRB 4-6.1 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour complete as per specification. Specification No. KBS 4.6.2

KSRB 4.2.1 : Providing and laying in position reinforced cement concrete of design mix M25 with OPC cement @340kgs, with 20mm and down size graded granite metal coarse aggregates @0.70cum and fine aggregates @ 0.47cum, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in foundation plinth and ground floor level for roof slabs, staircase, lintles, retaining walls, return walls, walls (any thickness) including attached plasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window cills, fillets etc., including cost of all materials, labour, HOM of machinery, curing, complete as per specifications. Specification No. KBS 4.1, 4.6

KSRB 4.9.2: Providing T.M.T. steel reinforcement for R.C.C work using TMT bars Fe 500 including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM of machinery complete as per specifications. Specification No. KBS 4.6.3

KSRB 24-46 : Repairs to plaster in patches of 2.5 sqm and less in walls, ceilings 10 to 20mm thick in cement mortar 1:6 including cutting the patches in proper shape and re-plastering the surface of the wall including disposal of rubbish with a lead of 50m including cost of materials, labour, complete as per specifications. Specification No.KBS 24.2.1

KSRB 15.1.2 Providing flush pointing to square rubble, course or uncoursed stone masonry with cement mortar 1:4, 20mm deep, after raking joints to depth of20mm nicely lining, including cost of materials, labour, curing complete as per specifications.

KSRB 14.7-1: Providing and laying flooring with M 15 cement concrete, 40 mm thick using broken granite metal of 20mm and down size laid to line and level in one layer and finish with a floating coat of neat cement , including cost of materials, labour, curing, complete as per specifications. Specification No. KBS 14.3

KSRB 14.14-2: Providing skirting, dadooing. Rises of steps with colour glazed tiles of size 30x45cms 6mm thick with border of size 30x10cms in cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour complete as per specification No: KBS 14.16,14.17

KSRB 15.12.1Providing Gopi colour washing to new wall surface in two coats with lime and gopi colour of approved quality, to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and other foreign matter including cost of materials, labour, complete as per specifications.

KSRB 15-14.1 : Providing and applying two coats with oil bound washable distemper of approved brand and shade on wall surface including priming coat with distemper primer after thoroughly brooming the surface free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications.

Providing and finishing external walls in one coat with waterproof cement paint of approved brand and shade to give an even shade after thoroughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specifications.

KSRB 15-20.1 : Providing and applying floor painting with ready mix paint in two coats ( excluding priming coat ) on new concrete/asbestos cement sheet/ plastered surfaces brushing to give an even shade after preparing the surface after thoroughly cleaning oil, dirt, dust other foreign matter and sand papering including cost of materials, labour, complete as per specifications. For wood/steel/metal surface

Providing and fixing in position fully paneled Mathi/Nandhi wood shutters for doors, styles and rails of 30mm thick with bottom and lock rails of 180mm wide, top rail and styles 100mm wide as per drawing and panels of 25 mm thick including cost of materials, labours, HOM of machineries complete as per specifications(excluding cost of fixtures) Specification No: KBS 9.34

KSRB 9-24.2: Providing and fixing in position fully glazed for windows shutters with Honne wood styles and rails of 25mm. thick, 75mm wide in single shutters with 4mm thick plain glass fixed with wooden beading including cost of materials, labour charges, HOM of machineries complete as per specifications. (excluding cost of fixtures) Specification No. KBS 9.34, 9.42 For Door / Window / Ventilators as per specification No:9.34,9.42

Providing and fixing RCC door frames factory manufactured, with C.C. 1:1 1/2:3 reinforced with 3 Nos. of 6 mm dia. Main bars and 6 mm dia. Stirrups welded at 30 cm C/C, vibrating, curing including cost of steel and fabrication charges having 3 Nos. of hinges with 20mm x 3mm M.S. flat welded with required iron rods and flats with drilling and fixing 4 No.of flat screw nuts each in concrete for fixing hinges and making necessary provision in concrete for fixing aldrops, tower bolts etc., including cost of one coat of oil based enamel primer, 4 No.of hold fasts, 3 Nos. ISS Iron oxidized hinges necessary metal screws etc., complete. 60mm x 100 mm size-Door frames.

Supply and fixing of door frame made of hollow extruded PVC Section (Nandi or Equivalent) having dimension of 40x57mm with the wall thickness of 2mm+/-0.2mm duly reinforced with seasoned wood plank at the hinges side. The door frame top 2 corners shall be metric cut/wielded.

PVC DOOR SHUTTER (Nandi or Equivalent) Supply and fixing of door shutters made of rigid PVC extruded hollow section (Nandi or equivalent) o f 20mm x 200mm with the wall thickness of 1.0mm + /0.1mm equally divided into 4nos with tongue and groove locking arrangements. The shutter frame is made of 58x24 mm with the wall thickness of 1.5mm+/-0.15mm section metrical and joined at 4 corners with 125mmx225mm plastic brackets. The shutter shall be horizontally reinforced with 2nos of 8mm PVC rods. Teak wood buttons shall be reinforced inside the door shutter during the fabrication of the door shutter at those points wherever the hardware is fixed on to the door shutter.

Providing & Fixing Aluminum windows / partitions / ventilators with 1.2mm thick sections and 4mm glass. All the sections are to be fixed to the wall by drilling and necessary screwing arrangements. Slanting glass shall be provided for ventilators including all cost of materials, labour charges etc. complete

Rectification of existing old Aluminum sliding windows / aluminum partition by replacing the U rubber glass beading, replacement of necessary nylon wheels, aluminum sections, handles, clips and locking arrangements etc., complete including cost of all materials, labours, tools & plants and all other incidental charges etc., complete.

KSRB 11-4 : Providing and fixing white vitreous china clay, water closet Orissa pattern of size 580 x 440mm with integral type footrests, 100mm S or P trap, (approved make) cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Specification No. KBS 11

KSRB 11-6: Providing and fixing white vitreous china clay, water closet European type (Pedestal type, S-trap) with black solid plastic seat and lid, C.P brass hinges, rubber buffers. 10 litre white glazed / vitreous china clay low level, flushing cistern (all are approved make) with fittings, C.I / M.S brackets, 40mm diameter flush bend with fittings and clamps, overflow arrangements with specials and 25mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Specification No. KBS 11

KSRB 11-11.5 : Providing and fixing white vitreous china clay, flat back wash basin size 450x300mm with a single 15mm C.P brass pillar tap with C.I / M.S brackets, 32 mm C.P. brass waste of standard pattern, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Specification No. KBS 11

Providing gun metal pillar cocks 15mm dia of I class conforming to ISI specifications and fixing them in position as per directions including of cost of materials and fixtures and conveyance to spot.

Providing and applying water proofing to concrete surfaces with high quality polymer-modified bituminous compounds (confirming to ASTM D5147) reinforced with non woven polyester fabric, weighing 180gm/sqm granular finish 4mm thick by torch on application method conforming to the detailed specification and methodology.

KSRB 11-15.3: Providing and fixing 453 x 357mm dia rectangular shape mirror with plastic moulded frame of approved make and shade with 6mm thick hard board backing including cost of materials, labour complete as per specifications.

KSRB 13-11.1 :Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM of equipments and testing complete as per specifications.(For 1000 litre capacity) Specification No.KBS 13.22

Supply & fixing to wall ceiling and floor Unplasticised PVC pipes 10Kgs per Sqcm working pressure of out side diameter chemp plast/Wavin or equivalent make with pipe fittings, wall clips making good the wall, ceiling and floor including cost of all materials, labour charges, HOM and testing complete as per specification. No:KBS 13.2,15.4/13.9 for 25mm dia pipe

Supply & fixing Chorinated poly vinyl Chloride(CPVC) pipes confirming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at one meter spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete.(Internal work exposed on wall) 25mm nominal OD pipe

Supply & fixing of PVC Ball Valve of 25mm size of approved make, Supreme/ Finolex/ Kissan/ prince or equivalent, including cost of conveyance, labour. T & P & all incidental charges etc. complete.

Supplying & Fixing in brass bib cock of approved quality nominal bore including cost of all materials, labour and HOM with all lead with complete as per specification No:KBS13.2.2/13.3, KSRB-13-6.1-2- 20mm dia nominal bore

KSRB13-6.3-3: Providing and fixing in position brass gate valve with C.I wheel of approved quality (screwed end) 25mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Specification No.KBS 13.2.6 / 13.3

Supplying of PVC automatic flushing cistern 7.5 liters capacity with fittings of approved make including conveying the materials to work spot including cost of all materials etc complete.

Supplying & fixing of float valve of size 25mm of approved quality & make including conveying the materials to work spot including cost of all materials etc. complete. for successful completion of the work.

Providing and fixing hydraulic door closures-Aluminum body

KSRB-13-10: Providing and fixing to wall ceiling and floor Unplastised PVC pipes 10Kg/sqcm working pressure of outside diameter chemp plast/Wavin or equivalent make with pipe fittings, wall clips making good the wall, ceiling and floor including cost of all materials, labour charges, HOM and testing complete as per specification. No:KBS 13.2,15.4/13.9 for 32mm dia pipe

KSRB 7.9: Providing and fixing M.S. grill work for windows and ventilators weighing 21kg/sqm using M.S. flats, or M.S. square rods, or combination of M.S. flats and square rods as per approved design, drawing including cutting steel sections and welding the same to required pattern with a coat of red lead primer, cost of materials, fixtures, labour and HOM of machinery complete as per specifications. Specification No. KBS 7.12

Providing 12mm thick ply wood sheet including conveying the materials to work spot including cost of all materials etc complete.

Supplying of Heavy mazdoor with tools & plants etc complete.

Supplying of Carpenter with tools etc complete.

Supplying of licensed plumber with tools etc complete.

Repairing the damaged high density polyethylene (HDPE) pipe of 150mm outside diameter including cutting the damaged portion on either ends and welding / Jointing with HDPE pipe of required length, suitable flange, compression type fittings including cost of all materials, labour charges HOM of equipment and testing etc. complete for successful completion of the work.

Hiring of crane for lifting and transporting heavy materials like pre-cast slabs, dwarf walls and lifting of water supply pipelines, valves, etc. for repairs including all required lifting accessories viz., chain, ropes, slings etc. complete

Drilling holes in top deck slab of 50mm dia upto a depth of 100mm in plain cement concrete works by core cutting method and disposing the debris within a lead of 50M and providing & fixing the anchor rods of 25mm dia of required size & design after placing the pre-cast dwarf walls in position and grouting the bolts with ready-mix epoxy grout of approved make including cost and conveyance of all materials, cutting, bending labour charges, hire charges of all T & P, transpiration and all other incidental charges etc. complete for successful completion of the work as directed by the Engineer-in-charge.

Painting new letters and figures (15 cms high and 10 cms width) with synthetic enamel paint black or any other approved colour to give an even shade complete as per specifications. ("i) Hindi (Matras commas and the like not to be measured and paid for half letter shall be counted as half)" including cost of materials, labour etc. complete as directed by the dept. ( Once in three months)

Removing and resetting Mangalore tiles and replacing broken ones wherever necessary including cost of materials, labour, HOM complete as per specifications. (excluding cost of new tiles).

Supplying and fixing new Mangalore tiles on existing reapers including cost of materials, labour, HOM complete as per specifications.

Removing and fixing old Mangalore ridge tiles including pointing with C.M. 1:3. including cost of materials, labour, HOM complete as per specifications

Supplying of Pumping attender for pumping the water from the ground water tank to the Over head Tank at the oil jetty area etc., complete.

Periodical cleaning of the RCC over head tanks of capacity 2 lakhs liters to 3 lakhs liters Including clearing water at scoure cleaning side wall bottom & top including hire charges of plant, cost of tools , labour charges etc. complete.

Periodical cleaning of the RCC Underground reservoir tanks of capacity 4 lakhs liters to 6 lakhs liters Including clearing water, bailing water using diesel pump complete side wall bottom & top including hire charges of plant, cost of tools , labour charges etc. complete.

Periodical cleaning of the RCC Underground reservoir tanks of capacity 50,000 liters to 1 lakhs liters Including clearing water, bailing water using diesel pump complete side wall bottom & top. including hie charges of plant, cost of tools , labour charges etc. complete.

Periodical cleaning of small water tanks of capacity varying 500 liters to 2000 liters including clearing water from tank , cleaning side, bottom & top including hire charges of plant, cost of tools , labour charges etc. complete.

Zaira Constructions