Repairs to Galvalume Fencing along the periphery of East Break Water at fishing harbour in view of IFR 2026

Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in Channels, angles, tees and flats etc..,as required and as directed by the Engineer-in-charge, complete.All labour and materials.

Hire and operational charges and running charges of crane 20 tonne capacity including operator charges fuel etc..,as required and as directed by the Engineer-in-charge, complete.

Hire and operational charges and running charges of 9 tonne Diesel Truck ( with POL) capacity including operator charges fuel etc..,as required and as directed by the Engineer-in-charge, complete

Providing and laying cement concrete with 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing etc..,as required and as directed by the Engineer-in-charge, complete.All labour and materials.

Providing and fixing Pre-painted Galavalume Trapezoidal profile Roofing sheets with 0.50mm thickness , coating :Alu-Zinc coating AZ 150 GSM.Tensile strength :550 MPA.Paint coating :Regular Modified Polyster painting .Painting thickness (Top) :18 to 20 Microns (Bottom) :5 to 7 Microns.Sheet width :1.020, Length : Maximum 12 meters with Regular Range colours or as desired by Engineer-in-charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5 x 55mm) with EPDM seal, complete upto any pitch in horizontal /vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape etc..,as required and as directed by the Engineer-in-charge, complete.All labour and materials.

Supply Structural steel such as tees, angles channels and R.S joists etc.., at site of work including transportation , loading ,unloading and stacking etc..,as required and as directed by the Engineer-in-charge, complete.All labour and materials

Supply Structural steel such as Flats upto 10 mm in thickness etc.., at site of work including transportation , loading ,unloading and stacking etc..,as required and as directed by the Engineer-in-charge, complete.All labour and materials

Structural steel fabrication work in single section , fixed with or without connecting plate, including cutting , hoisting , fixing in poistion and applying a priming coat of approved steel primer all complete.All labour and materials but excluding of steel.

Supply Structural steel such as Mild steel plates 5 mm in thickness etc.., at site of work including transportation , loading ,unloading and stacking etc..,as required and as directed by the Engineer-in-charge, complete.All labour and materials

Finishing with Epoxy paint (two or more coats) On steel work at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc..,as required and as directed by the Engineer-in-charge, complete.All labour and materials

Please Enable Macros to View BoQ information