Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹2.1 Cr
EMD Value
₹2.1 L
Closing Date
4 Oct 2022, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
NBCC Bhawan
NBCC Bhawan
Balance Civil, Electrical, Plumbing, External Development and all other associated work necessary for completion /functioning of the Building at BnHQ BSF Baramulla
NBCC/SBG-N/BSF-Baramulla-II/02Dated08-09-2022~EW686add6b5df7c5716b069b29
NBCC/SBG-N/BSF-Baramulla-II/02Dated08-09-2022
Open Tender-Domestic
Civil Works General
NBCC Bhawan
₹11,800
₹2.1 L
4 Oct 2022
8 Sept 2022
4 Oct 2022
8 Sept 2022
4 Oct 2022
ITEM NO Unit Qty. Rate Amount
Head Civil Work DSR-2018 Items
Sub- Sub-Head : Earth Work
Head:A
Earth work in excavation by mechanical means (Hydraulic excavator) / manual
means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm
2.6 on plan) including getting out and disposal of excavated earth, lead up to 50m
and lift up to 1.5m,as directed by Engineer-in-Charge.
2.6.1 All kinds of soil Cum 586.00 181.85 106564.10
Earth work in excavation by mechanical means (Hydraulic excavator) / manual
means in foundation trenches or drains (not exceeding 1.5 m in width or 10
2.8 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5
m, including getting out the excavated soil and disposal of surplus excavated
soil as directed, within a lead of 50 m.
2.8.1 All kinds of soil. Cum 1000.00 252.30 252300.00
Excavating trenches of required width for pipes, cables, etc including
excavation for sockets, and dressing of sides, ramming of bottoms, depth up
to 1.5 m, including getting out the excavated soil, and then returning the soil
2.10 as required, in layers not exceeding 20 cm in depth, including consolidating
each deposited layer by ramming, watering, etc. and disposing of surplus
excavated soil as directed, within a lead of 50 m :
2.10.1 All kinds of soil
2.10.1.1 Pipes, cables etc, not exceeding 80 mm dia. m 25.00 223.00 5575.00
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
Extra for excavating trenches for pipes, cables etc. in all kinds of soils for
depth exceeding 1.5m, but not exceeding 3m.(Rate is over corresponding
basic item for depth upto 1.5 metre). (127% of corresponding item i.e. of
Filling available excavated earth (excluding rock) in trenches, plinth, sides of
foundations etc. in layers not exceeding 20cm in depth, consolidating each
deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5
Digitally signed by OM
OM PRAKASH
PRAKASH 14:54:02 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Supplying and filling in plinth with sand under floors, including watering,
ramming, consolidating and dressing complete.
Surface dressing of the ground including removing vegetation and inequalities
2.28 not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift
upto1.5 m.
2.28.1 All kinds of soil. Sqm 899.00 24.35 21890.65
Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the
Clearing jungle including uprooting of rank vegetation, grass, brush wood,
trees and saplings of girth up to 30 cm measured at a height of 1 m above
ground level and removal of rubbish up to a distance of 50m outside the
periphery of the area cleared.
Total (A) DSR Items 673344.76
Sub- Sub-Head : Concrete Work
Head:B
Providing and laying in position cement concrete of specified grade excluding
4.1 the cost of centering and shuttering - All work up to plinth level :
1:4:8 (1 Cement : 4 coarse sand(zone-III) : 8 graded stone aggregate 40 mm
nominal size).
Centering and shuttering including strutting, propping etc. and removal of form
work for :
4.3.1 Foundations, footings, bases for columns. Sqm 316.45 284.85 90140.78
Providing and laying damp-proof course 40mm thick with cement concrete
4.10 1:2:4 (1 cement : 2 coarse sand(Zone III) : 4 graded stone aggregate Sqm 11.00 347.90 3826.90
12.5mm nominal size).
Extra for providing and mixing water proofing material in cement concrete per
4.12 work in doses by weight of cement as per manufacturer’s specification. 50kg 15.00 56.55 848.25
cement
Providing and applying a coat of residual petroleum bitumen of grade of VG-10
of approved quality using 1.7kg per square metre on damp proof course after
cleaning the surface with brushes and finally with apiece of cloth lightly soaked
in kerosene oil.
Digitally signed by OM
OM PRAKASH
PRAKASH 14:54:02 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3
coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick
4.17 bed of dry brick ballast 40 mm nominal size, well rammed and consolidated Sqm 107.56 614.05 66047.22
and grouted with fine sand, including necessary excavation leveling and
dressing and finishing the top smooth.
Total (B) DSR Items 1094198.75
Sub- Sub-Head : Reinforced Cement Concrete
Head:C
Centering and shuttering including strutting, propping etc. and removal of form
5.9.1 Foundations, footings, bases of columns, etc. for mass concrete Sqm 50.45 284.85 14370.68
Walls (any thickness) including attached pilasters, butteresses, plinth and
string courses etc.
5.9.3 Suspended floors, roofs, landings, balconies and access platform Sqm 146.64 693.05 101628.85
5.9.4 Shelves (Cast in situ) Sqm 79.91 693.05 55381.63
5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers Sqm 20.00 552.05 11041.00
5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts Sqm 50.00 733.70 36685.00
5.9.7 Stairs, (excluding landings) except spiral-staircases Sqm 2.00 622.35 1244.70
Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window
5.9.15 sills, string courses, bands, copings, bed plates, anchor blocks and the like Sqm 2.00 284.85 569.70
5.9.16 Edges of slabs and breaks in floors and walls
5.9.16.1 Under 20 cm wide Metre 60.00 173.25 10395.00
5.9.16.2 Above 20 cm wide Sqm 5.00 737.30 3686.50
5.9.19 Weather shade, Chajjas, corbels etc., including edges Sqm 5.00 766.75 3833.75
5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 15000.00 83.50 1252500.00
Providing and laying in position machine batched and machine mixed design
mix M-25 grade cement concrete for reinforced cement concrete work, using
cement content as per approved design mix, including pumping of concrete to
site of laying but excluding the cost of centering, shuttering, finishing and
5.33 reinforcement, including admixtures in recommended proportions as per IS:
9103 to accelerate, retard setting of concrete, improve workability without
impairing strength and durability as per direction of Engineer-in-charge.
Digitally signed by OM
OM PRAKASH
PRAKASH 14:54:02 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less
cement used as per design mix is payable/recoverable separately).
5.33.1 All works upto plinth level Cum 70.00 7997.30 559811.00
5.33.2 All works above plinth level upto floor V level Cum 70.00 9400.85 658059.50
Add for using extra cement in the items of design mix over and above the
5.35 Quintal 96.00 673.30 64636.80
specified cement content therein.
Total (C) DSR Items 3200354.11
Sub- Sub-Head : Masonry Work
Head:D
Brick work with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in foundation and plinth in:
6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 20.00 6157.45 123149.00
Brick work with common burnt clay F.P.S. (non modular) bricks of class
6.4 designation 7.5 in superstructure above plinth level up to floor V level in all
shapes and sizes in :
6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 20.00 7590.45 151809.00
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of
6.13 class designation 7.5 in superstructure above plinth level up to floor V level.
6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) Sqm 13.51 932.10 12592.67
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every
6.15 third course of half brick masonry.ird course of half brick masonry. Sqm 13.51 80.10 1082.15
Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt
clay F.P.S. (non modular) bricks of class designation 7.5 including grouting
6.44 metre 120.00 52.00 6240.00
with cement mortar 1:4 (1 cement : 4 fine sand).
Total (D) DSR Items 294872.82
Digitally signed by OM
OM PRAKASH
PRAKASH 14:54:02 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Sub- Sub-Head : Cladding Work
Head:E
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded
and prepolished, machine cut for kitchen platforms, vanity counters, window
sills, facias and similar locations of required size,approved shade, colour and
8.2 texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse
sand), joints treated with white cement, mixed with matching pigment, epoxy
touch ups, including rubbing, curing, moulding and polishing to edges to give
high gloss finish etc. complete at all levels.
Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble
8.2.1.1 Area of slab upto 0.50 sqm Sqm 5.00 2777.40 13887.00
8.2.1.2 Area of slab over 0.50 sqm Sqm 10.00 2552.65 25526.50
8.2.2 Granite of any colour and shade
8.2.2.1 Area of slab upto 0.50 sqm Sqm 10.00 4217.35 42173.50
8.2.2.2 Area of slab over 0.50 sqm Sqm 10.00 4007.65 40076.50
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc.,
8.3 including machine polishing to edge to give high gloss finish etc. complete as
per design approved by Engineer-in-Charge.
8.3.1 Marble work Metre 150.00 220.35 33052.50
8.3.2 Granite work Metre 150.00 376.25 56437.50
Extra for fixing marble /granite stone, over and above corresponding basic
8.4 item, in facia and drops of width upto 150 mm with epoxy resin based Metre 46.00 434.25 19975.50
adhesive, including cleaning etc. complete.
Extra for providing opening of required size & shape for wash basin/kitchen
sink in kitchen platform, vanity counter and similar location in marble/ Granite/
8.5 stone work, including necessary holes for pillar taps etc. including moulding, Each. 32.00 734.55 23505.60
rubbing and polishing of cut edges etc. complete
Digitally signed by OM
OM PRAKASH
PRAKASH 14:54:02 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:
15622 (thickness to be specified by the manufacturer), of approved make, in
all colours, shades except burgundy, bottle green, black of any size as
8.31 approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 Sqm 733.00 1030.30 755209.90
mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing
with grey cement slurry @ 3.3kg per sqm, including pointing in white cement
mixed with pigment of matching shade complete.
Total (E) DSR Items 1009844.50
Sub- Sub-Head : Wood and P.V.C. Work
Head:F
Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and
1.4mm wide aperture with matching wood beading
Providing and fixing Pre-laminated flat pressed 3 layer (medium density)
particle board or graded wood particle board IS : 3087 marked, with one side
9.18 decorative and other side balancing lamination Grade I, Type II exterior grade
IS : 12823 marked, in shelves with screws and fittings wherever required,
edges to be painted with polyurethane primer (fittings to be paid separately).
9.18.2 25 mm thick Sqm 78.00 1548.45 120779.10
Providing and fixing ISI marked flush door shutters conforming to IS : 2202
(Part I) non-decorative type, core of block board construction with frame of 1st
9.21 class hard wood and well matched commercial 3 ply veneering with vertical
grains or cross bands and face veneers on both faces of shutters:
35 mm thick including ISI marked Stainless Steel butt hinges with necessary
screws.
25mm thick (for cupboard) including ISI marked nickel plated bright finished
M.S. piano hinges with necessary screws.
Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated
brackets :
9.47.2 25 mm dia (heavy type) metre 200.00 162.35 32470.00
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel
type) with necessary screws etc. complete :
9.63.4 100x10 mm Eachs. 174.00 38.70 6733.80
Digitally signed by OM
OM PRAKASH
PRAKASH 14:54:02 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Providing and fixing ISI marked 85x42 mm oxidised M.S. pull bolt lock
9.64 conforming to IS : 7534 with necessary screws bolts, nut and washers etc. Each. 4.00 104.70 418.80
complete.
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992
with necessary screws etc. complete :
9.66.3 75 mm Eachs. 176.00 23.90 4206.40
Providing and fixing bright finished brass tower bolts (barrel type) with
necessary screws etc. complete :
9.74.1 250x10 mm Each. 50.00 373.65 18682.50
9.74.2 200x10 mm Each. 50.00 299.85 14992.50
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6
9.76 levers and a pair of lever handles of approved quality with necessary screws
etc. complete. Each. 20.00 712.75 14255.00
Providing and fixing bright finished brass handles with screws etc. complete:
9.81.1 125 mm Each. 100.00 204.65 20465.00
Providing and fixing bright finished brass hanging type floor door stopper with
necessary screws, etc. complete. Each. 20.00 106.70 2134.00
Providing and fixing aluminium hanging floor door stopper, ISI marked,
anodised (anodic coating not less than grade AC 10 as per IS : 1868)
transparent or dyed to required colour and shade, with necessary screws etc.
complete.
9.101.2 Twin rubber stopper Each. 20.00 62.05 1241.00
Total (F) DSR Items 651154.00
Sub- Sub-Head : Steel Work
Head:G
Structural steel work in single section, fixed with or without connecting
10.1 plate,including cutting, hoisting, fixing in position and applying a priming coat Kg 100.00 86.05 8605.00
of approved steel primer all complete
Structural steel work riveted, bolted or welded in built up sections, trusses and
framed work, including cutting, hoisting, fixing in position and applying a
priming coat of approved steel primer all complete.
Digitally signed by OM
OM PRAKASH
PRAKASH 14:54:02 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Providing and fixing factory made ISI marked steel glazed doors, windows and
ventilators, side /top /centre hung, with beading and all members such as
F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections,
joints mitred and flash butt welded and sash bars tenoned and riveted,
10.11 including providing and fixing of hinges, pivots, including priming coat of
approved steel primer, but excluding the cost of other fittings, complete all as
per approved design, (sectional weight of only steel members shall be
measured for payment).
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block
10.11.1 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone Kg 1500.00 166.50 249750.00
aggregate 20 mm nominal size)
Providing and fixing pressed steel door frames conforming to IS: 4351,
manufactured from commercial mild steel sheet of 1.60 mm thickness,
including hinges, jamb, lock jamb, bead and if required angle threshold of mild
steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel
10.14 welded or rigidly fixed together by mechanical means, including M.S. pressed
butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock
absorbers as specified and applying a coat of approved steel primer after pre-
treatment of the surface as directed by Engineer-in-charge:
10.14.2 Profile C
10.14.2.1 Fixing with adjustable lugs with split end tail to each jamb. m 281.60 444.35 125128.96
Fixing with carbon steel galvanised dash fastener of required dia and size (to
be paid for separately). m 10.00 433.65 4336.50
10.14.3 Profile E
10.14.3.1 Fixing with adjustable lugs with split end tail to each jamb. m 20.00 484.50 9690.00
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling
fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S.
sheet with its top surface hacked for proper bonding, top lid shall be screwed
10.18 into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed Each. 71.00 172.25 12229.75
screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar
bent to shape as per standard drawing.
Digitally signed by OM
OM PRAKASH
PRAKASH 14:54:02 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Steel work welded in built up sections/ framed work, including cutting,
10.25 hoisting, fixing in position and applying a priming coat of approved steel
primer using structural steel etc. as required.
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar
works.
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors
10.29 with M.S. Flat 15 x 3mm and nuts & bolts complete.
Galvanised M.S. Wire gauze with 0.63mm dia wire and 1.4 mm aperture on
both sides.
Providing & fixing glass panes with putty and glazing clips in steel doors,
windows, clerestory windows all complete with :
10.30.1 4.0 mm thick glass panes. Sqm 61.00 900.55 54933.55
10.30.2 5.5 mm thick glass panes. Sqm 112.00 1194.85 133823.20
Total (G) DSR Items 1227962.96
Sub- Sub-Head : Flooring
Head:H
Providing and fixing glass strips in joints of terrazzo/ cement concrete floors.
11.13.1 40 mm wide and 4 mm thick. Metre 10.00 75.15 751.50
Marble stone flooring with 18mm thick marble stone as per sample of marble
shall be approved by Engineer-in-charge over 20 mm (average) thick base of
11.23 cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey
cement slurry including rubbing and polishing complete with :
11.23.2 Raj Nagar plain. Sqm 60.00 1960.75 117645.00
11.24 Extra for pre finished nosing to treads of steps of marble stone. Metre 100.00 530.25 53025.00
Extra for marble stone flooring in treads of steps and risers using single length
up to 2.00 metre . Sqm 45.00 622.75 28023.75
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed
with grey cement slurry mixed with pigment to match the shade of the slab
including rubbing and polishing complete with base of cement mortar 1 : 4 (1
cement : 4 coarse sand) :
11.26.1 25 mm thick. Sqm 1333.00 1531.85 2041956.05
Digitally signed by OM
OM PRAKASH
PRAKASH 14:54:02 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid
on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and
11.27 jointed with grey cement slurry mixed with pigment to match the shade of the
slabs, including rubbing and polishing complete.
Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness
to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of
approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid
11.37 on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with
grey cement slurry @ 3.3kg/sqm including pointing the joints with white
cement and matching pigment etc.,., complete.
Providing and laying vitrified floor tiles in different sizes (thickness to be
specified by the manufacturer) with water absorption less than 0.08%and
conforming to IS : 15622 , of approved make, in all colours and shades, laid
11.41 on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with
grey cement slurry @ 3.3kg/sqm including grouting the joints with white
cement and matching pigments etc., complete.
11.41.2 Size of Tile 600x600 mm Sqm 185.00 1500.55 277601.75
Providing and laying Vitrified tiles in different sizes (thickness to be specified
by manufacturer) with water absorption less than 0.08 % and conforming to
I.S. 15622, of approved make in all colours & shade in skirting, riser of steps,
11.46 over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand),
jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with
white cement & matching pigments etc. complete.
11.46.2 Size of Tile 600x600 mm Sqm 20.00 1545.85 30917.00
Total (H) DSR Items 2960462.55
Sub- Sub-Head : Roofing
Head:I
Digitally signed by OM
OM PRAKASH
PRAKASH 14:54:02 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Providing and fixing false ceiling at all height including providing and fixing of
frame work made of special sections, power pressed from M.S. sheets and
galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS :
277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with
flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed
to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia
12.45 bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of
required length with nuts & bolts of required size and other end of angle
hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the
spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick
bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of
10.5 mm, at 450 mm centre to centre,
shall be fixed in a direction perpendicular to G.I. intermediate channel with
connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every
junction, including fixing perimeter channels 0.5 mm thick 27 mm high having
flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to
wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long
dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling
section and perimeter channel with the help of dry wall screws of size 3.5 x 25
mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered
and square edges of the board with recommended jointing compound , jointing
tapes , finishing with jointing compound in 3 layers covering upto 150 mm on
both sides of joint and two coats of primer suitable for board, all as per
manufacturer's specification and also including the cost of making openings for
light fittings, grills, diffusers, cutouts made with frame of perimeter channels
suitably fixed, all complete as per drawings, specification and direction of the
Engineer in Charge but excluding the cost of painting with :
12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part
I) : 2011 (Board with BIS certification marks) Sqm 479.00 1117.65 535354.35
Total (I) DSR Items 535354.35
Digitally signed by OM
OM PRAKASH
PRAKASH 14:54:02 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Sub- Sub-Head : Finishing
Head:J
13.1 12 mm cement plaster of mix :
13.1.2 1:6 (1 cement: 6 fine sand) Sqm 1000.00 254.25 254250.00
15 mm cement plaster on the rough side of single or half brick wall of mix :
13.2.2 1:6 (1 cement: 6 fine sand) Sqm 450.00 292.85 131782.50
13.16 6 mm cement plaster of mix :
13.16.1 1:3 (1 cement: 3 fine sand) Sqm 300.00 227.35 68205.00
Extra for plastering exterior walls of height more than 10 m from ground level
for every additional height of 3 m or part thereof. Sqm 200.00 65.95 13190.00
Distempering with 1st quality acrylic distemper (ready mixed) having VOC
content less than 50 gms/litre, of approved manufacturer, of required shade
and colour complete, as per manufacturer's specification.
13.42.1 Two or more coats on new work. Sqm 5884.00 87.15 512790.60
Applying one coat of water thinnable cement primer of approved brand and
manufacture on wall surface :
13.43.1 Water thinnable cement primer. Sqm 5884.00 60.00 353040.00
Finishing walls with Acrylic Smooth exterior paint of required shade :
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including
priming coat of exterior primer applied @ 2.20 kg/10 sqm). Sqm 2095.00 164.70 345046.50
13.50 Applying priming coat :
With ready mixed pink or Grey primer of approved brand and manufacture on
wood work (hard and soft wood) Sqm 317.00 57.05 18084.85
Painting with synthetic enamel paint of approved brand and manufacture to
give an even shade :
13.61.1 Two or more coats on new work. Sqm 1922.00 121.55 233619.10
Total (J) DSR Items 1930008.55
Sub- Sub-Head : Road Work
Head:K
Digitally signed by OM
OM PRAKASH
PRAKASH 14:54:02 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Preparation and consolidation of sub grade with power road roller of 8 to 12
tonne capacity after excavating earth to an average of 22.5 cm. depth,
16.1 dressing to camber and consolidating with road roller including making good
the undulations etc. and re-rolling the sub grade and disposal of surplus earth
with lead upto 50 metres. Sqm 1350.00 156.75 211612.50
Extra for compaction of earth work in embankment under optimum moisture
16.2 conditions to give at least 95% of the maximum dry density (proctor density).
16.3 Supplying and stacking at site.
16.3.1 90 mm to 45 mm size stone aggregate. Cum 169.00 1840.05 310968.45
16.3.2 63 mm to 45 mm size stone aggregate. Cum 169.00 1535.65 259524.85
16.3.6 Stone screening 13.2 mm nominal size (Type A). Cum 9.00 1727.65 15548.85
16.3.7 Stone screening 11.2 mm nominal size (Type B). Cum 9.00 1978.50 17806.50
Laying, spreading and compacting stone aggregate of specified sizes to WBM
specifications in uniform thickness, hand picking, rolling with 3 wheeled road /
vibratory roller 8-10 tonne capacity in stages to proper grade and camber,
16.4 applying and brooming requisite type of screening / binding material to fill up Cum 405.00 767.25 310736.25
interstices of coarse aggregate, watering and compacting to the required
density
Providing and applying tack coat using hot straight run bitumen of grade VG -
10 including heating the bitumen, spraying the bitumen with mechanically
16.30 operated spray unit fitted on bitumen boiler, cleaning and preparing the
existing road surface as per specifications :
16.30.1 On W.B.M. @ 0.75 Kg / sqm. Sqm 1350.00 42.05 56767.50
2.5 cm premix carpet surfacing with 2.25 cum and 1.12 cum of stone
chippings of 13.2mm and 11.2mm size respectively per 100 sqm. and 52 kg.
and 56 kg. of hot bitumen per cum of stone chippings of 13.2 mm and
16.33 11.2mm size respectively including a tack coat with hot straight run bitumen
including consolidation with road roller of 6 to 9 tonne capacity etc.
complete.(tack coat to be paid for separately) :
Digitally signed by OM
OM PRAKASH
PRAKASH 14:54:02 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
With paving Asphalt grade VG - 10 heated and then mixed with solvent at the
rate of 70 grams per kg of asphalt.
Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm
and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of
16.40 grade VG - 10 bitumen per cum of fine aggregate and 0.60 cum of fine Sqm 1350.00 73.70 99495.00
aggregate per 100 sqm of road surface including rolling and finishing with road
roller all complete.
Painting road surface marking with adequate nos of coats to give uniform finish
with ready mixed road marking paint conforming to IS : 164, on bituminous
16.48 surface in white/yellow shade including cleaning the surface of all dirt, scales,
oil, grease and foreign material etc. complete.
16.48.1 New work (Two or more coats). Sqm 100.00 215.95 21595.00
Providing and laying 60mm thick factory made cement concrete interlocking
paver block of M -30 grade made by block making machine with strong
vibratory compaction, of approved size, design & shape, laid in required colour
16.68 and pattern over and including 50mm thick compacted bed of coarse sand, Sqm 25.00 859.35 21483.75
filling the joints with fine sand etc. all complete as per the direction of Engineer-
in-charge.
Providing and laying at or near ground level factory made kerb stone of M-25
grade cement concrete in position to the required line, level and curvature,
jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making
joints with or without grooves (thickness of joints except at sharp curve shall
16.69 not to more than 5mm), including making drainage opening wherever required Cum 10.00 8376.15 83761.50
complete etc. as per direction of Engineer-in-charge (length of finished kerb
edging shall be measured for payment). (Precast C.C. kerb stone shall be
approved by Engineer-in-charge).
Total (K) DSR Items 1695914.25
Sub- Sub-Head : Water Proofing
Head:L
Providing and laying water proofing treatment to vertical and horizontal
22.3 surfaces of depressed portions of W.C., kitchen and the like consisting of:
Digitally signed by OM
OM PRAKASH
PRAKASH 14:54:02 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water
proofing compound conforming to IS 2645 in recommended proportions
including rounding off junction of vertical and horizontal surface.
(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand)
mixed with water proofing compound in recommended proportion including
rounding off junction of vertical and horizontal surface.
(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg.
per sqm of area.
(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC
sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Sqm 256.00 705.70 180659.20
kg/sqm).
Total (L) DSR Items 180659.20
Non-Schedule Item
Sub- Sub-Head : Water Proofing
Head:M
Providing & Laying cement concrete using broken brick/brickbats 25 mm to100
mm size with 50% of cement mortar 1:5 ( 1cement : 5 coarse sand )admixed
NS-1 Cum 163.63 2989.95 489234.17
with proprietary water proofing compound conforming to is :2645 in sunken
and like complete.
Digitally signed by OM
OM PRAKASH
PRAKASH 14:54:02 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Storage to be formed of 19mm commercial board at the back with fixed
shelves made of 19mm thick commercial board with all exposed edges finished
with 2mm thick PVC edge band (factory finished) as per details & architect
approval. Shutters of cabinet to be formed of 19mm thick commercial board
finished with 1mm thk laminate on outer surfaces and enamel painted
whitefrom inside as er specifications.. Rear backing of cabinet to be formed
with 12mm commercial plywood complete in all respect including 100mm high
laminate finished skirting as per approval/details.The cupboard shall have 2
nos drawer running on 12mm drawer channelof best quality of approved
makes. one drawer shall be lockable. the brass lcok shall be used for the
same. the drawer shall have 100mm Long SS handles fixed by cutting a chase
in the front of the drawer. Storage to be complete with hardware installed as
NS-3 sqm 135.00 7773.88 1049473.77
per the appoved model/make & as directed to consist of the following: Each
Shutter to have 3 nos of automatic spring loaded hinge of approved make
installed strictly a per manufacturers guidelines with requisite tools/jigs. Each
set of shutters to be provided with 1no. multi purpose lock as specified, SS
handles size 600mm long as per approval, auto bolt, etc. (as per approved
make) Basic price of Laminate @ Rs.550/ Sqmt (front area to be measured
from bottom i/c height of leg/skirting to top of cabinet). the depth of cupborad
shall be 600mm depth including the thickness of the backing ply.Hardware: All
hardware shall be as per the appoved model/make all complete.
Total (L) Non-Schedule Items 1538707.94
Head Plumbing- DSR 2018 Items
L Sub-Head : Sanitary Installations
Providing and fixing water closet squatting pan (Indian type W.C.pan ) with
100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing
17.1 cistern, including flush pipe, with manually controlled device (handle lever)
conforming to IS : 7231, with all fittings and fixtures complete, including
cutting and making good the walls andfloors wherever required:
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with
integral type foot rests
Digitally signed by OM
OM PRAKASH
PRAKASH 14:54:02 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Providing and fixing white vitreous china pedestal type water closet (European
type) with seat and lid, 10 litre low level white vitreous china flushing cistern &
C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow
17.3 arrangement with specials of standard make and mosquito proof coupling of
approved municipal design complete, including painting of fittings and
brackets, cutting and making good the walls and floors wherever required :
17.3.1 W.C. pan with ISI marked white solid plastic seat and lid Each. 3.00 6685.00 20055.00
Providing and fixing white vitreous china flat back or wall corner type lipped
front urinal basin of 430x260x350 mm and 340x410x265 mm sizes
17.4 respectively with automatic flushing cistern with standard flush pipe and C.P.
brass spreaders with brass unions and G.I clamps complete, including painting
of fittings and brackets, cutting and making good the walls and floors wherever
required :
17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern Each. 15.00 4982.25 74733.75
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar
taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings
and brackets, cutting and making good the walls wherever require:
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P.
brass pillar taps
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per
IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting
of fittings and brackets, cutting and making good the walls wherever required :
17.10.1 Kitchen sink with drain board
17.10.1.3 510x1040 mm bowl depth 200 mm. Each. 2.00 5584.10 11168.20
17.10.2 Kitchen sink without drain board
17.10.2.1 610x510 mm bowl depth 200 mm. Each. 1.00 3631.55 3631.55
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.
waste fittings complete.
17.28.2 Flexible pipe
17.28.2.1 32 mm dia Each. 10.00 101.10 1011.00
17.28.2.2 40 mm dia Each. 30.00 101.10 3033.00
Digitally signed by OM
OM PRAKASH
PRAKASH 14:54:02 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
17.70 Providing and fixing PTMT Bottle Trap for Wash basin and sink.
Bottle trap 31mm single piece moulded with height of 270 mm, effective
length of tail pipe 260 mm from the centre of the waste coupling, 77 mm
breadth with 25 mm minimum water seal, weighing not less than 260 gms
Bottle trap 38 mm single piece moulded with height of 270 mm, effective
length of tail pipe 260 mm from the centre of the waste coupling, 77 mm
breadth with 25 mm minimum water seal, weighing not less than 263 gms
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high
and 112 mm distance from wall of standard shape with bracket of the same
materials with snap fittings of approved quality and colour, weighing not less
than 105 gms.
600 mm long towel rail with total length of 645 mm, width 78 mm and
effective height of 88 mm, weighing not less than 190 gms.
Total (M) DSR Items 367625.30
Sub- SUBHEAD-I(B): SANITARY INSTALLATIONS (NON-SCHEDULED ITEMS)
Head:N
Providing and Fixing 15mm C.P brass mixing fitting for kitchen sink with
NSP-1 swinging spout complete. Including cutting and making good the walls
wherever required .
C.P. brass mixing fitting Each 4.00 1255.07 5020.26
Supply, Installation, Testing & Commissioning stainless steel cockroch trap
consisting of 0.45 mm thick inner and outer cup and 1.00 mm thick top grating
(Jali) with ring to be fixed inside ‘P’ traps with cement concrete.
110x110 mm Each 1.00 546.96 546.96
Total (N) DSR Items 5567.23
Sub- SUBHEAD-II(B) : SOIL, WASTE & VENT PIPES(NON -SCHEDULE ITEMS)
Head:O
Providing and fixing UPVC pipes type-B confirming to IS: 13592 for soil waste
and vent pipes on wall face/floor Supreme/equivalent make including jointing
NSP-3 Metre 150.00 226.31 33946.46
with seal ring with solvent cement/glue jointing etc. 75 mm DN.
Digitally signed by OM
OM PRAKASH
PRAKASH 14:54:02 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Providing and fixing UPVC pipes type-B confirming to IS: 13592 for soil waste
and vent pipes on wall face/floor Supreme/equivalent make including jointing
NSP-4 Metre 120.00 342.85 41141.44
with seal ring with solvent cement/glue jointing etc. 110 mm DN.
Providing and fixing on wall face/floor moulded/accessories for unplasticised
Rigid PVC water pipes Supreme/equivalent make conforming to IS : 14735
NSP-5 Each 25.00 122.09 3052.15
Type B, including jointing with seal ring solvent cement/glue jointing, 75 mm
Coupler
Providing and fixing on wall face/floor moulded/accessories for unplasticised
PVC water pipes Supreme/equivalent make conforming to IS : 14735 Type B,
NSP-6 Each 28.00 145.73 4080.57
including jointing with seal ring solvent cement/glue jointing, 110 mm Coupler
Providing and fixing on wall face/floor moulded/accessories for unplasticised
PVC water pipes Supreme/equivalent make conforming to IS : 14735 Type B,
NSP-7 Each 45.00 182.43 8209.37
including jointing with seal ring solvent cement/glue jointing, 75x75x75 mm
Plain T.
Providing and fixing on wall face/floor moulded/accessories for unplasticised
PVC water pipes Supreme/equivalent make conforming to IS : 14735 Type B,
NSP-8 Each 25.00 239.80 5994.90
including jointing with seal ring solvent cement/glue jointing, 110x110x110
mm Plain T.
Providing and fixing on wall face/floor moulded/accessories for unplasticised
PVC water pipes Supreme/equivalent make conforming to IS : 14735 Type B,
NSP-9 Each 12.00 198.50 2381.96
including jointing with seal ring solvent cement/glue jointing, 75x75x75 mm T
with door.
Providing and fixing on wall face/floor moulded/accessories for unplasticised
PVC water pipes Supreme/equivalent make conforming to IS : 14735 Type B,
NSP-10 Each 4.00 250.24 1000.96
including jointing with seal ring solvent cement/glue jointing, 110x110x110
mm T with door.
Providing and fixing on wall face/floor moulded/accessories for unplasticised
PVC water pipes Supreme/equivalent make conforming to IS : 14735 Type B,
NSP-11 Each 25.00 119.57 2989.13
including jointing with seal ring solvent cement/glue jointing, 75 mm Bend
87.5 degree
Providing and fixing on wall face/floor moulded/accessories for unplasticised
PVC water pipes Supreme/equivalent make conforming to IS : 14735 Type B,
NSP-12 Each 8.00 125.57 1004.58
including jointing with seal ring solvent cement/glue jointing, 110 mm Bend
87.5 degree
Digitally signed by OM
OM PRAKASH
PRAKASH 14:54:02 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Providing and fixing on wall face/floor moulded/accessories for unplasticised
PVC water pipes Supreme/equivalent make conforming to IS : 14735 Type B,
NSP-13 Each 25.00 376.92 9422.91
including jointing with seal ring solvent cement/glue jointing, 110 mm dia P
Providing and fixing Upvc floor drain of following size inlet and outlet including
cutting and making good the walls and floors wherever required complete in all
NSP-14 respect, 110x63 mm outlet IS : 14735 Type B, including jointing with seal ring Each 60.00 167.14 10028.61
solvent cement/glue jointing
Total (O) DSR Items 123253.05
Sub- Sub-Head : Water Supply
Head:P
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having
thermal stability for hot & cold water supply, including all CPVC plain & brass
threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This
18.7 includes jointing of pipes & fittings with one step CPVC solvent cement and
testing of joints complete as per direction of Engineer in Charge. : Internal
work - Exposed on wall
18.7.1 15 mm nominal outer dia. Pipes. metre 5.00 241.55 1207.75
18.7.2 20 mm nominal outer dia. Pipes. metre 3.00 306.95 920.85
18.7.3 25 mm nominal outer dia .Pipes. metre 5.00 369.20 1846.00
18.7.4 32 mm nominal outer dia. Pipes. metre 4.00 480.55 1922.20
18.7.5 40 mm nominal outer dia. Pipes. metre 6.00 648.60 3891.60
18.7.6 50 mm nominal outer dia. Pipes. metre 5.00 903.50 4517.50
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having
thermal stability for hot & cold water supply, including all CPVC plain & brass
threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This
18.8 includes jointing of pipes & fittings with one step CPVC solvent cement and the
cost of cutting chases and making good the same including testing of joints
complete as per direction of Engineer in Charge. :Concealed work, including
cutting chases and making good the walls etc.
18.8.1 15 mm nominal outer dia .Pipes. metre 143.00 409.65 58579.95
18.8.2 20 mm nominal outer dia .Pipes. metre 138.00 478.15 65984.70
18.8.3 25 mm nominal outer dia .Pipes. metre 70.00 561.95 39336.50
Digitally signed by OM
OM PRAKASH
PRAKASH 14:54:02 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
18.8.4 32 mm nominal outer dia .Pipes. metre 40.00 679.15 27166.00
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c
18.10 cutting and making good the walls etc. : Internal work – Exposed on wall.
18.10.1 15 mm dia. nominal bore metre 2.00 284.90 569.80
18.10.2 20 mm dia. nominal bore metre 3.00 344.10 1032.30
18.10.3 25 mm dia. nominal bore metre 10.00 438.00 4380.00
18.10.4 32 mm dia. nominal bore metre 5.00 529.70 2648.50
18.10.5 40 mm dia. nominal bore metre 5.00 639.60 3198.00
18.10.6 50 mm dia. nominal bore metre 12.00 786.75 9441.00
Providing and fixing G.I. pipes complete with G.I. fittings including trenching
and refilling etc. : External work 0.00
18.12.1 15 mm dia. nominal bore metre 2.00 244.15 488.30
18.12.2 20 mm dia. nominal bore metre 4.00 283.80 1135.20
18.12.3 25 mm dia. nominal bore metre 10.00 364.55 3645.50
18.12.4 32 mm dia. nominal bore metre 10.00 424.70 4247.00
18.12.5 40 mm dia. nominal bore metre 40.00 483.15 19326.00
18.12.6 50 mm dia. nominal bore metre 30.00 565.25 16957.50
18.12.7 65 mm dia. nominal bore metre 50.00 716.00 35800.00
18.12.8 80 mm dia. nominal bore metre 100.00 866.40 86640.00
Making connection of G.I. distribution branch with G.I. main of following sizes
18.13 by providing and fixing tee, including cutting and threading the pipe etc.
complete : 0.00
18.13.1 25 to 40 mm nominal bore Each. 2.00 673.45 1346.90
18.13.2 50 to 80 mm nominal bore Each. 4.00 1432.75 5731.00
Fixing water meter and stop cock in G.I. pipe line including cutting and
18.14 threading the pipe and making long screws etc. complete (cost of water meter Each. 1.00 606.55 606.55
and stop cock to be paid separately).
18.15 Providing and fixing brass bib cock of approved quality : 0.00
18.15.1 15 mm nominal bore Each. 32.00 302.55 9681.60
18.15.2 20 mm nominal bore Each. 5.00 326.45 1632.25
18.16 Providing and fixing brass stop cock of approved quality : 0.00
18.16.1 15 mm nominal bore Each. 2.00 302.55 605.10
18.16.2 20 mm nominal bore Each. 4.00 326.45 1305.80
Providing and fixing gun metal gate valve with C.I. wheel of approved quality
(screwed end) : 0.00
18.17.1 25 mm nominal bore Each. 4.00 497.15 1988.60
Digitally signed by OM
OM PRAKASH
PRAKASH 14:54:02 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
18.17.1A 20 mm nominal bore Each. 1.00 460.20 460.20
18.17.2 32 mm nominal bore. Each. 2.00 581.25 1162.50
18.17.3 40 mm nominal bore Each. 2.00 678.40 1356.80
18.17.4 50 mm nominal bore Each. 2.00 869.20 1738.40
18.17.5 65 mm nominal bore Each. 1.00 1488.10 1488.10
18.17.6 80 mm nominal bore Each. 1.00 2217.90 2217.90
Providing and fixing ball valve (brass) of approved quality, High or low
pressure, with plastic floats complete : 0.00
18.18.1 15 mm nominal bore Each. 4.00 338.70 1354.80
18.18.2 20 mm nominal bore Each. 5.00 386.40 1932.00
18.18.3 25 mm nominal bore Each. 3.00 394.00 1182.00
Providing and fixing gun metal non- return valve of approved quality (screwed
18.19.1 25 mm nominal bore 0.00
18.19.1.1 Horizontal Each. 4.00 477.70 1910.80
18.19.1.2 Vertical Each. 3.00 504.45 1513.35
18.19.2 32 mm nominal bore 0.00
18.19.2.1 Horizontal Each. 3.00 641.75 1925.25
18.19.2.2 Vertical Each. 2.00 708.65 1417.30
18.19.3 40 mm nominal bore 0.00
18.19.3.1 Horizontal Each. 3.00 792.40 2377.20
18.19.3.2 Vertical Each. 3.00 979.70 2939.10
18.19.4 50 mm nominal bore 0.00
18.19.4.1 Horizontal Each. 4.00 1144.05 4576.20
18.19.4.2 Vertical Each. 3.00 1251.10 3753.30
18.19.5 65 mm nominal bore 0.00
18.19.5.1 Horizontal Each. 1.00 2043.95 2043.95
18.19.5.2 Vertical Each. 1.00 2057.35 2057.35
18.19.6 80 mm nominal bore 0.00
Digitally signed by OM
OM PRAKASH
PRAKASH 14:54:02 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
18.19.6.1 Horizontal Each. 1.00 2890.70 2890.70
18.19.6.2 Vertical Each. 1.00 3399.10 3399.10
Providing and fixing uplasticised PVC connection pipe with brass unions :
18.21.2 45 cm length 0.00
18.21.2.1 15 mm nominal bore Each. 132.00 83.00 10956.00
18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 0.00
18.22.2 150 mm diameter Each. 50.00 188.80 9440.00
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement
mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box
100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab
1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm
18.32 nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1
cement :5 fine sand:10 graded stone aggregate 40mm nominal size ) and
inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm
thick finished with a floating coat of neat cement complete as per standard
design :
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
Painting G.I. pipes and fittings with synthetic enamel white paint with two
18.38 coats over a ready mixed priming coat, both of approved quality for new work
18.38.1 15 mm diameter pipe. metre 2.00 15.20 30.40
18.38.2 20 mm diameter pipe. metre 3.00 18.15 54.45
18.38.3 25 mm diameter pipe. metre 10.00 23.70 237.00
18.38.4 32 mm diameter pipe. metre 5.00 28.40 142.00
18.38.5 40 mm diameter pipe. metre 5.00 33.40 167.00
18.38.6 50 mm diameter pipe. metre 12.00 39.80 477.60
Providing and filling sand of grading zone V or coarser grade all- round the G.I.
pipes in external work. 0.00
18.41.1 15 mm diameter pipe metre 2.00 142.60 285.20
18.41.2 20 mm diameter pipe metre 4.00 144.55 578.20
18.41.3 25 mm diameter pipe metre 10.00 148.40 1484.00
18.41.4 32 mm diameter pipe metre 10.00 152.25 1522.50
Digitally signed by OM
OM PRAKASH
PRAKASH 14:54:02 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
18.41.5 40 mm diameter pipe metre 40.00 154.15 6166.00
18.41.6 50 mm diameter pipe metre 30.00 159.95 4798.50
18.41.7 65 mm diameter pipe metre 50.00 252.45 12622.50
18.41.8 80 mm diameter pipe metre 100.00 260.15 26015.00
18.41.9 100 mm diameter pipe metre 30.00 275.60 8268.00
18.41.10 150 mm diameter pipe metre 10.00 410.50 4105.00
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the
18.46 pipe and making long screws etc. complete (New work)
18.46.1 15 mm nominal bore Each. 5.00 235.75 1178.75
18.46.2 20 mm nominal bore Each. 12.00 261.15 3133.80
18.46.3 25 mm nominal bore Each. 12.00 340.10 4081.20
18.46.4 32 mm nominal Each. 10.00 384.25 3842.50
18.46.5 40 mm nominal bore Each. 5.00 452.50 2262.50
18.46.6 50mm nominal bore Each. 5.00 598.10 2990.50
18.46.7 65mm nominal bore Each. 8.00 939.30 7514.40
18.46.8 80 mm nominal bore Each. 10.00 1018.20 10182.00
Providing and fixing C.P. brass bib cock of approved quality conforming to
18.49.1 15 mm nominal bore. Each. 84.00 418.95 35191.80
Providing and fixing C.P. brass long nose bib cock of approved quality
18.50 conforming to IS standards and weighing not less than 810 gms.
18.50.1 15 mm nominal bore. Each. 5.00 618.80 3094.00
Providing and fixing C.P. brass stop cock (concealed) of standard design and of
approved make conforming to IS:8931. 0.00
18.52.1 15 mm nominal bore. Each. 50.00 606.25 30312.50
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of
approved quality conforming to IS:8931 : 0.00
18.53.1 15mm nominal bore Each. 132.00 532.00 70224.00
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of
18.53A approved make and quality as per direction of Engineer-in-charge.
18.58 Providing and fixing PTMT grating of approved quality and colour. 0.00
18.58.1 Circular type. 0.00
18.58.1.2 125 mm nominal dia with 25 mm waste hole. Each. 88.00 51.25 4510.00
Digitally signed by OM
OM PRAKASH
PRAKASH 14:54:02 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Providing and fixing PTMT Ball cock of approved quality, colour and make
18.62 complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.
50mm nominal bore, 242 mm long. Weighing not less than 1240 gms.
Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth
18.65 102 mm, height of 75 mm with concealed fitting arrangements. Weighing not
less than 106 gms. Each. 26.00 130.50 3393.00
Total (P) DSR Items 741761.90
Sub- Sub-Head : Drainage
Head:Q
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with
collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1
cement : 2 fine sand) including testing of joints etc. complete :
19.6.2 150 mm dia. R.C.C. pipe m 120.00 462.60 55512.00
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4
coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse
sand(zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation
concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone
aggregate 40 mm nominal size), inside plastering 12 mm thick with cement
19.7 mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat
cement and making channels in cement concrete 1:2:4 (1cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating
coat of neat cement complete as per standard design :
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light
duty) 455x610 mm internal dimensions, total weight of cover and frame to be
not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Digitally signed by OM
OM PRAKASH
PRAKASH 14:54:02 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Inside size 120x90 cm and 90 cm deep including C.I. cover with frame
(medium duty) 500 mm internal diameter, total weight of cover and frame to
be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) :
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Constructing brick masonry circular type manhole 0.91 m internal dia at
bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement :4 coarse
sand), in side cement plaster 12 mm thick with cement mortar 1:3 (1cement :
3 coarse sand) finished with a floating coat of neat cement, foundation
19.9 concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40
mm nominal size), and making necessary channel in cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
finished with a floating coat of neat cement, all complete as per standard
design :
0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade
designation) 560 mm internal diameter conforming to I.S. 12592, total weight
of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4
19.9.1 (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
including centering, shuttering all complete.(Excavation, foot rests and 12 mm
thick cement plaster at the external surface shall be paid for separately) :
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Extra depth for circular type manhole 0.91 m internal dia (at bottom) beyond
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Digitally signed by OM
OM PRAKASH
PRAKASH 14:54:02 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Constructing brick masonry circular manhole 1.22 m internal dia at bottom and
0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside
cement plaster 12 mm thick with cement mortar 1:3 (1 cement :3 coarse
sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1
19.11 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and
making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand
: 4 graded stone aggregate 20 mm nominal size) finished with a floating coat
of neat cement, all complete as per standard design :
1.68 m deep with SFRC Cover and frame (heavy duty HD- 20 grade
designation) 560 mm internal diameter conforming to I.S. 12592, total weight
of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4
19.11.1 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
including centering, shuttering all complete.(Excavation, foot rests and 12 mm
thick cement plaster at the external surface shall be paid for separately) :
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Extra depth for circular type manhole 1.22 m internal dia (at bottom) beyond
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Providing orange colour safety foot rest of minimum 6 mm thick plastic
encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS:
1786, having minimum cross section as 23 mm x 25 mm and over all
minimum length 263 mm and width as 165 mm with minimum 112 mm space
between protruded legs having 2 mm tread on top surface by ribbing or
chequering besides necessary and adequate anchoring projections on tail
19.16 length on 138 mm as per standard drawing and suitable to with stand the bend
test and chemical resistance test as per specifications and having
manufacture's permanent identification mark to be visible even after fixing,
including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1
cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size)
complete as per design.
Digitally signed by OM
OM PRAKASH
PRAKASH 14:54:02 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of
required shape and approved quality
19.19.2.2 Circular shape 500 mm internal diameter Each. 4.00 1035.60 4142.40
Supplying and fixing C.I. cover 300x300 mm without frame for gully trap
19.20 (standard pattern) the weight of cover to be not less than 4.5 kg.
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick
19.32 honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m
long complete as per standard design.
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Total (Q) DSR Items 286021.35
Sub- DSR-2018 INTERNAL ELECTRICAL
Head:R
1.0 WIRING
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5
sq.mm FRLS PVC insulated copper conductor single core cable in surface /
1.10 recessed medium class PVC conduit,with modular switch, modular plate,
suitable GI box and earthingthe point with 1.5 sq.mm. FRLS PVC insulated
copper conductorsingle core cable etc as required.
1.10.2 Group C Point 118.00 990.00 116820.00
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper
conductor single core cable in surface /recessed medium class PVC conduit, 2
1.11 way modular switch, modular plate, suitable GI box and earthing the point with
1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as
required. Point 20.00 1057.00 21140.00
Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper
conductor single core cable in surface/ recessed medium class PVC conduit
alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable
for loop earthing as required. Metre 910.00 200.00 182000.00
Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper
conductor single core cable in surface/ recessed medium class PVC conduit
alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core
cable for loop earthing as required. Metre 706.00 308.00 217448.00
Digitally signed by OM
OM PRAKASH
PRAKASH 14:54:02 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes
1.14 of FR PVC insulated copper conductor, single core cable in surface/ recessed
medium class PVC conduit as required. 0.00
1.14.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Metre 500.00 146.00 73000.00
1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 200.00 249.00 49800.00
1.14.9 4 X 6 sq. mm + 2 X 6 sq. mm earth wire Metre 100.00 394.00 39400.00
1.14.10 4 X 10 sq. mm + 2 X 10sq. mm earth wire Metre 60.00 543.00 32580.00
Supplying and drawing following pair 0.5 sq mm FR PVC insulated annealed
1.18 copper conductor, unarmored telephone cable in the existing surface/ recessed
steel/ PVC conduit as required. 0.00
1.18.2 2 Pair Metre 120.00 20.00 2400.00
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper
conductor PE insulated, shielded with fine tinned copper braid and protected
with PVC sheath in the existing surface/ recessed steel/ PVC conduit as
required. Metre 30.00 33.00 990.00
Supplying and fixing of following sizes of medium class PVC conduit along with
1.21 accessories in surface/recess including cutting the wall and making good the
same in case of recessed conduit as required. 0.00
1.21.1 20 mm Metre 95.00 146.00 13870.00
1.21.2 25 mm Metre 672.00 165.00 110880.00
Supplying and fixing following modular switch/ socket on the existing
1.24 modular plate & switch box including connections but excluding modular plate
etc. as required. 0.00
1.24.6 Telephone socket outlet Each 8.00 119.00 952.00
1.24.7 TV antenna socket outlet Each 6.00 119.00 714.00
Supplying and fixing stepped type electronic fan regulator on the existing
1.25 plate switch box including connections but excluding modular plate etc. as
required. Each 85.00 342.00 29070.00
Supplying and fixing blanking plate on the existing plate & switch box
excluding plate as required. Each 60.00 32.00 1920.00
Supplying and fixing following size, GI box & cover plate as required.
1.27.1 1 or 2 Module (75mmX75mm) Each 50.00 243.00 12150.00
1.27.3 4 Module (125mmX75mm) Each 20.00 287.00 5740.00
1.27.4 6 Module (200mmX75mm) Each 35.00 333.00 11655.00
Digitally signed by OM
OM PRAKASH
PRAKASH 14:54:02 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Supplying and fixing suitable size GI box with modular plate and cover in
front on surface or in recess, including providing and fixing 3 pin 5/6 amps
1.31 modular socket outlet and 5/6 amps modular switch, connection etc. as Each 100.00 401.00 40100.00
required. (For light plugs to be used in non residential buildings).
Supplying and fixing suitable size GI box with modular plate and cover in front
on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps
modular socket outlet and 15/16 amps modular switch, connection etc. as
required.
Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/
wooden block including connection etc as required.
Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes
and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with
all accessories including connections etc. as required.
Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts,
complete as required.
Installation, testing and commissioning of pre-wired, fluorescent fitting /
compact fluorescent fitting of all types, complete with all accessories and
1.41 tube/lamp etc. irectly on ceiling/ wall, including connections with 1.5 sq. mm Each 138.00 91.00 12558.00
FRLS PVC insulated, copper conductor, single core cable and earthing etc. as
required.
Installation, testing and commissioning of ceiling fan, including wiring the
down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated,
1.45 copper conductor, single core cable, including providing and fixing phenolic Each 85.00 203.00 17255.00
laminated sheet cover on the fan box etc. as required.
Installation of exhaust fan in the existing opening, including making good the
1.50 damage, connection, testing, commissioning etc. as required. 0.00
1.50.1 upto 450mm sweep Each 33.00 363.00 11979.00
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of
all sizes.
Digitally signed by OM
OM PRAKASH
PRAKASH 14:54:02 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2
pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in
2.18 sheet steel enclosure, on surface or in recess, with chained metal cover for the Each 8.00 1232.00 9856.00
socket out let and complete with connections, testing and commissioning etc.
as required.
Providing, laying and fixing following dia G.I. pipe (medium class) in ground
14.13 complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as 0.00
required
14.13.1 50 mm dia Each 40.00 536.00 21440.00
2.0 MCCB, MCB & DB'S 0.00
Providing and fixing following rating and breaking capacity and pole MCCB with
thermomagnetic release and terminal spreaders in existing cubicle panel board
including drilling holes in cubicle panel, making connections, etc. as required.
2.2.3 150 A, 16 KA,TPMCCB Each 1.00 4688.00 4688.00
Supplying and fixing of following ways surface/ recess mounting, vertical type,
415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder
painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth
2.5 bar, din bar for mounting MCBs (but without MCBs and incomer ) as required .
(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are
required.)
2.5.1 4 way (4 + 12), Double door Each 6.00 5651.00 33906.00
2.5.2 8 way (4 + 24), Double door Each 9.00 7744.00 69696.00
2.5.3 12 way (4 + 36), Double door Each 1.00 9828.00 9828.00
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve,
miniature circuit breaker suitable for inductive load of following poles in the
existing MCB DB complete with connections, testing and commissioning etc. as
required. 0.00
2.10.1 Single pole Each 228.00 199.00 45372.00
2.10.4 Triple Pole Each 5.00 826.00 4130.00
2.11 Supplying and fixing single pole blanking plate in the existing MCB DB
complete etc. as required. Each 10.00 8.00 80.00
Digitally signed by OM
OM PRAKASH
PRAKASH 14:54:02 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Supplying and fixing following rating, double pole, 240 volts, isolator in the
2.12 existing MCB DB complete with connections, testing and commissioning etc. as
required. 0.00
2.12.1 40 amps Each 10.00 339.00 3390.00
Supplying and fixing following rating, four pole, (three phase and neutral), 415
volts, residual current circuit breaker (RCCB), having a sensitivity current 30
mA in the existing MCB DB complete with connections, testing and
commissioning etc. as required. 0.00
2.15.1 25 A Each 4.00 2526.00 10104.00
2.15.2 40 A Each 10.00 2626.00 26260.00
2.15.3 63 A Each 5.00 2777.00 13885.00
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of
mild steel, at least 2 mm thick, and vitreous enameled white on both sides,
and with inscription in single red colour on front side as required.
EARTHING 0.00
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories,
and providing masonry enclosure with cover plate having locking arrangement
and watering pipe etc. with charcoal/ coke and salt as required.
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as
strip earth electrode, including connection/terminating with G.I. nut, bolt,
5.9 spring, washer etc. as required. (Jointing shall be done by overlapping and Metre 41.00 131.00 5371.00
with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
Providing and laying earth connection from earth electrode with 6 SWG dia G.I.
Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I.
5.12 Metre 22.00 188.00 4136.00
thimble excavation and re-filling as required.
Total (R) DSR Items 1357588.00
Sub- FITTING AND FIXTURES
Head:S
Digitally signed by OM
OM PRAKASH
PRAKASH 14:54:02 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Supply, Installation, testing,commissioning, receiving the lighting fixture & fan
including assembling etc. of the following lighting fixtures including fixing
NSE-1 arrangement and with all accessories as required with necessary GI pipe/steel
pipe etc as required for hanging of lighting fixtures.
Supplying, instalation, testing & commissioning of All fixtures shall be complete
with lamps and required control gear.All fluorescent tube light fixtures & LED
fixtures shall be complete with control gear & power factor improvement
capacitor. Only high quality Electronic Ballasts are to be used. For dimmable
fixtures, HF dimmable electronic ballast to be used.Samples of all the fixtures
with all available colour shall be submitted to the architect/ client/ Project
Manager before supply & approval is taken.Please check the fixtures final
quantity from the Architect / Project Manager before ordering and be sure of
actual requirement prior to ordering.
i LUMILINEBS18WLED865SPCWH, HAVELLS MAKE Each 10.00 605.96 6059.64
ii LUMILINEBS9WLED865SPCWH, HAVELLS MAKE Each 10.00 558.12 5581.25
iii LUMILINEBS20WLED865SPCWH, HAVELLS MAKE Each 150.00 660.61 99091.85
Supply of Ceiling Fan of 1200mm sweep complete erected in position with all
vi Each 120.00 1764.47 211736.57
accessories.(Make- Havels or equivalent)
Supplying of approved make Exhaust Fan of the following sizes and its all
NSE-02 accessories suitable for operation on 230V single phase, 50 Hz, AC supply
complete as required.
a) 380 mm sweep (1400rpm) Each 33.00 4572.64 150896.99
b) 300 mm sweep (1400rpm) Each 33.00 3804.02 125532.61
Supplying installation, testing commissioning of telephone tag block or similar
NSE-03 specification of other approved makes. of the following sizes
a) 10 Pair Each 2.00 1330.73 2661.46
Supplying & fixing of following capacity TP&N MCB inside the existing panel
NSE-04 board with drilling holes in cubicle panel, making connections, etc. as required.
a) 40 Amps TPN Each 6.00 2151.97 12911.82
b) 63 Amps TPN Each 6.00 2162.33 12974.01
FIRE SUPRESSION SYSTEM
Digitally signed by OM
OM PRAKASH
PRAKASH 14:54:02 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Supply of ISI marked (IS:2878) Squeeze Grip carbon-di-oxide gas type fire
extinguisher with cylinder of 4.5 kg. capacity complete with suitable length
NSF-04 Each 4.00 13678.84 54715.36
hose and horn duly charged and ready for use GI bracket for wall mounting
etc. as required.
Supply of ISI marked (IS:13849) ABC dry powder 6 kg. fire extinguisher with
NSF-05 cylinder fully charged complete with bakelite horn discharge tube, GI bracket Each 4.00 7313.83 29255.30
for wall mounting etc. as required.
Providing and fixing of 2W LED based Exit Sign Board (Bajaj BHEX 20 R AC or
NSF-06 other makes of similar specification) as complete required. Eachs 4.00 12059.48 48237.92
NSE-7 STREET LIGHT FEEDER PILLER:
Supply, installation, testing and commissioning of Street Light Feeder piller
suitable for operation on 415V, 50 Hz, 5 wire, AC system capable of
withstanding fault level of 16KA, 415 volts. The panel shall be outdoor, floor
standing, Thermoplastic Polycarbonate, compartment type enclosure of IP-54
(EN 60 529) with necessary bus bar and cable alleyes and panel size of
1700x2050x710mm. The incoming and outgoing feeders shall be accomodated
in a multi-tier arrangement, earting, sign writing, numbering shall be complete
with foundation channel as per specifications & single line diagram and
comprise of the following switchgear and accessories: (Shop drawing to be got
approved by the Engineer-In-Charge prior to fabrication).
a) INCOMER
1 No. 63A 4P 16KA MCCB with Thermal Magnetic Release with Rotary Extended
Handel
ii) 1 No. 63A 4P 25KA CONTACTOR
iii) 3 Nos. CT's 60/5A
iv) 3 Nos. R, Y B PHASE Indicator Lamp- LED type 220VAC
v) 2 Nos. ON/OFF Indicator Lamp- LED type 220VAC
vi) 2 Nos. Start/ Stop Push Button
vii) 3 Nos. 06A Control MCB
b) BUS-BAR
1 Set - 200A TPN electrolytic aluminium bus bar for complete panel suitable
i) for 25KA fault level covered with colour coded PVC sleeves.
c) OUTGOING
Digitally signed by OM
OM PRAKASH
PRAKASH 14:54:02 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
i) 4 Nos.- 40A, 3 Pole MCB, having breaking capacity of 10KA Set 1.00 79841.33 79841.33
Supply of 1.1 KV grade PVC insulated PVC sheathed XLPE aluminium conductor
armoured cable conforming to IS:1554 Part-I of the following sizes (Shop
drawing of cable layout to be got aproved by the Engineer-In-Charge prior to
purchase).
a) 4 C x 25 Sqmm (for feeder Piller) Mtr 120.00 381.12 45734.33
b) 4 C x 10 Sqmm (for Street light) Mtr 510.00 254.35 129716.15
Supply, installation, testing & commissioning of Havells Cat.
No.ENDURACITYLITEPLAT+SL48WLED757PASYBOPC or similar specifications of
NSE-9 Each 17.00 6178.44 105033.49
other approved make with all accessories complete as required. (Post Top
Lantern)
Supply and installation of Octagonal Pole Pole 4 mtr. long bottom diameter
NSE-10 130mm, top diameter 70mm and base plate 210x210x12mm, foundation bolts Each 17.00 11327.54 192568.17
600x20mmx4Nos.
Total (S) N-DSR Items 1312548.24
Sub- SCHEDULE ITEMS: EXTERNAL ELECTRICAL WORKS
Head:T
Supplying and drawing following sizes of FRLS PVC insulated copper conductor,
1.17 single core cable in the existing surface/ recessed steel/ PVC conduit as
required.
1.17.12 3 x 2.5 sq. mm Metre 68.00 75.00 5100.00
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories,
and providing masonry enclosure with cover plate having locking arrangement
and watering pipe etc. with charcoal/ coke and salt as required.
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop
5.18 earthing along with existing surface/ recessed conduit/ submain wiring/ cable Metre 1020.00 37.00 37740.00
as required.
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of
1.1 KV grade of following size direct in ground including excavation, sand
cushioning, protective covering and refilling the trench etc as required.
7.1.1 Upto 35 sq. mm Metre 189.00 323.00 61047.00
Digitally signed by OM
OM PRAKASH
PRAKASH 14:54:02 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of
7.5 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as
required. 0.00
7.5.1 Upto 35 sq. mm Metre 189.00 31.00 5859.00
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE
7.7 power cable of 1.1 KV grade of following size on wall surface as required.
7.7.1 Upto 35 sq. mm (clamped with 1mm thick saddle) Metre 252.00 39.00 9828.00
Supplying and making end termination with brass compression gland and
aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE
aluminium conductor cable of 1.1 KV grade as required.
9.1.32 4 X 10 sq. mm (25mm) Each 34.00 219.00 7446.00
9.1.34 4 X 25 sq. mm (28mm) Each 2.00 250.00 500.00
Erection of metallic pole of following length in cement concrete 1:3:6 (1
cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)
foundation including excavation and refilling etc. as required.
11.3.1 Above 4.5 metre and upto 6.5 metre Each 17.00 4492.00 76364.00
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in
ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement
: 2 fine sand) including trenching (75 cm deep) and refilling etc as required.
14.14.1 100 mm dia metre 30.00 525.00 15750.00
Total (T) DSR Items 246174.00
GRAND TOTAL BOQ 21433378.00
GRAND TOTAL BOQ 21433378.00
Digitally signed by OM
OM PRAKASH
PRAKASH 14:54:02 IST
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.06 MB
01NITBNBSF-II.pdf
Tender Document
3AMAKES.pdf
Tender Document
4DRAWINGS.pdf
Tender Document
5GCCWITHAMND01to17.pdf
Tender Document
6Specification.pdf
Tender Document
2BOQ.pdf
Tender Document
corrigendum-1040-CORRIGENDUM3.pdf
pdf • 0.78 MB
corrigendum-1015-CORRIGENDUM-02BNHQ.pdf
pdf • 0.69 MB
corrigendum-1000-CORRIGENDUM-01.pdf
pdf • 0.69 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .