Mtc of Tarfadum Diversion Scheme at Tulamura GP under Kakraban RD Block Udaipur SH Dismantling Steel Work Installation of Rubber Seal at Steel gates Painting and other allied works during the FY 2025 26

Dismantling steel work in built up section in channels, angles, tees, flats including all gusset plates, bolts, nuts, cutting rivets, welding including dismembering and stacking of serviceable materials and unserviceable materials separately with all lifts and upto a lead of 50 m etc. complete as per direction of the Engineer- in-charge.

To open out existing old rubber seals and covering plate from barrage gate by cutting bolts and nuts where necessary as per direction of the Engineer-in-Charge.

Providing structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as required

Supplying, fitting fixing at site new rubber seals for barrage gate and fixing them with new bolts, nuts and washer and punching necessary tubes in rubber seals with new covering plate. The new rubber seals are to be proper shape and size, hardwires, staging and scaffolding where necessary as per direction of Engineer-in-charge. i) For Flat Shaped. Horizontal Side

Supplying, fitting fixing at site new rubber seals for barrage gate and fixing them with new bolts, nuts and washer and punching necessary tubes in rubber seals with new covering plate. The new rubber seals are to be proper shape and size, hardwires, staging and scaffolding where necessary as per direction of Engineer-in-charge. i) For 'L' Shaped Vertical Side

Renovation and Over houling of old roller of steel sluice gate which are rusted and make them working properly by greasing and oiling with tools and tackles as per direction of Engineer-in-Charge. i) For Diversion.

Maintainance of gear boxes and overhauling of them i.e. Dismantling of gear, pinion etc. and again fitting fixing the same in position after necessary maintenance as required including change of oil seal if necessary and greasing and mobiling by the contractor's own labour, tools and plants as required as per direction of the Engineer-in-Charge

Supplying fitting fixing of thrust bearing (SKF 222/9C) including bearing cover, oil seal of gate roller as per sample including necessary scaffolding, consumables, labour etc for barrage gate as per direction of the Engineer-in-charge.

Realignment of sluice gates with wire rope by adjusting the rope with hoisting machinery and alignment of the gates in the proper line with side seal and gate roller path and fitted the lower position of the rope with the gate hinge and make them working properly neccesary tools and plants and scaffolding etc. complete.

Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: Two or more coats on new work

Please Enable Macros to View BoQ information