12/EDCB/2025-26

Amount

The work of safe carriage of the following material from CB Ganj store center to work site under the jurisdiction of EDD-Shahjhanpur Road, Bareilly Approx. distance upto 85 Km. Including safe loading and unloading.

PCC Pole 8.5 Mtr

AB Cable 3x95 sqmm

AB Cable 3x120 sqmm

33 KV VCB

33 KV Control Pannel For Double Transformer

Armoured Control Cable 4x2.5 Sq mm

Armoured Control Cable 2x2.5 Sq mm

Other Line material

Erection/Installation of following new panel (VCB) in control room including grouting of Anchor bolt of Panel and making/repairing of pocket for cable to insert in panel from trench and fixing, taping of bus bar with wiring for PT. AC, DC connection including providing of AC & DC Supply.

33 KV VCB

33 KV Control Pannel For Double Transformer

Providing cutting, fixing and welding of MS Strip from existing, earthing to new 33 KV VCB Complete in all respect, all material shall be arranged by the Contractor.

Fixing of Armoured Control Cable 4x2.5 Sq mm as per norms complete in all respect

Fixing Armoured Control Cable 2x2.5 Sq mm as per norms complete in all respect

Erection of Single/Double pole in H.T/L.T lines including fitting of all accessories as per RESSPO Norms

PCC Pole 8.5 Mtr (Single)

Grouting of following Pole with 1:4:8 mixture in size(450x450x1500mm.) including cost of cement/BB & sand Required as per RESSPO Norms

PCC Pole 8.5 Mtr (Single)

The work of Driving the earthing electrode and making connections with 6 S.W.G. GI wire as per RESSPO Norms

Dismentaling of Old/Jarjar wire as per norm complete in all respect

Laying Of Armoured Control Cable 4x2.5 Sq mm

Laying Of Armoured Control Cable 2x2.5 Sq mm

Laying, Stringing & Sagging of Following Conductor complete in all respect

AB Cable 3x95 Sq mm

AB Cable 3x120 Sq mm

The work of digging of pits, erection of Stay Clamp, Insulator etc.

Grouting of stays, 1:4:8 cc ratio (600x600x300mm.) as per RESPO norms.

Fixing of 3 Phase Distribution Box

Delta Earthing of Power Tranformers installed at Various 33/11 KV S/s as per norms complete in all respect. To complete the work Contractor will provide all material, Manpower, T&P, safe carriage of material to worksite. Above work will be carried out under supervision of concerned JE/SDO/EE)

Rod Earthing of Distribution Transformer as per norms complete in all respect. To complete the work Contractor will provide all material, Manpower, T&P, safe carriage of material to worksite. Above work will be carried out under supervision of concerned JE/SDO/EE)

Pipe Earthing at Various Places as per norms complete in all respect. Above work will be carried out under supervision of concerned JE/SDO/EE) Pipe Earthing of Transformer (By boring of 4 inch diameter 20 m deep, 40 mm diameter A class GI pipe is inserted to a depth of 20 m and a holed pipe of 1.5 m length is inserted at the bottom. Tighten one end of the MS strip of size 50x6mm with the nut bolt with the neutral of the converter and weld the other end with the GI pipe inserted in the boring for earthing. Putting a socket on the upper part of the pipe (mouth) so that water can be poured into it to retain moisture. To complete the work Contractor will provide all material, Manpower, T&P, safe carriage of material to worksite.

Gaurding at Road Crossing Complete in all respect

Supply and Fixing of Following Material as per RESPO norms complete in all respect (would be Provided by contractor through approved vendors of Discom at his own cost)

Suspension Clamp

J Hook

Eye Hook

Dead End Clamp

Stone Pad 300x300x75 mm

Holding Clamp for T Off, Cross Arm and Expouser Pole

PG Clamp

Piercing Connector

Stay Clamp

Stay Insulator

Earthwire Clamp

Gauarding Angle Clamp

Eye Bolt For Guard wire

Nut Bolt with washer

Safe back carriage of Following item (if any) from work site to C.B. Ganj store Bareilly approx distance upto 85 Km including loading & unloading.

Scrap

ZAHOOR TRADERS (BID ID -5543974)

M/S SUPER ENGINEERING TRADERS (BID ID -5534590)