Replacement of Old Damaged 300mm dia and 150mm dia inlet sluice valves to Gail Reservoir in 2nd division in RMC.

Supply and delivery of "Resilient Seated Soft Sealing" gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40 / SG-400/15 or GGG-50 / SG-500/7 of Equivalent as per IS 1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and seals of NBR. The Valves should be Vaccume tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns) - RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN - 3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including transportation. Sluice Valve(PN 1.6) MPa For 150mm dia

Supply and delivery of "Resilient Seated Soft Sealing" gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40 / SG-400/15 or GGG-50 / SG-500/7 of Equivalent as per IS 1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and seals of NBR. The Valves should be Vaccume tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns) - RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN - 3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including transportation. Sluice Valve(PN 1.6) MPa For 300mm dia

Labour charges for lowering and keeping in position of 100mm dia DI D/F Sluice valve in the readymade trench true to alignment and gradient as per SS. and as directed by the Site Engineer. For 150mm dia NRV

Labour charges for lowering and keeping in position of 100mm dia DI D/F Sluice valve in the readymade trench true to alignment and gradient as per SS. and as directed by the Site Engineer. For 300mm dia

Jointing 100mm dia CI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead upto 500Mtrs and testing to required pressure complete (Reference to specifications BIS No.3114/1994) including hire charges of testing equipment, labour and materials needed for testing etc. complete as per S.S. and as directed by the Site Engineer. For 150mm dia & NRV

Jointing 100mm dia CI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead upto 500Mtrs and testing to required pressure complete (Reference to specifications BIS No.3114/1994) including hire charges of testing equipment, labour and materials needed for testing etc. complete as per S.S. and as directed by the Site Engineer. For 300mm dia

Supply delivery of Double Flanged Slant seat Swing Check Valve (NRV) with body and Disc of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with fully encapsulated in Vulcanized EPDM rubber & Fusion bonded Electro Static epoxy powder coating inside and outside color Blue RAL 5005 with Min. Coating thickness of 250 microns. The EPDM rubber & Epoxy rubber & Epoxy powder should conform to W 270 standards (Drinking water application) and face to face dimensions as per EN 558-1 / DIN 3202-F6 / IS 5312 & Flange connections as per IS:1538 excluding all duties, taxes and transportation. NRV (PN 1.6) MPa For 150mm dia

Supply & delivery of Tamper Proof DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40 / SG-400/15 or GGG-50/SG-500 / 7 or Equivalent as per IS 1865, IS:3896-2 with Food Grade Epoxy Powder Coating (EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005, All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS / PTFE / EPDM / NBR and generally conforming to DIN / BIS / AWWA standards (or) combination Flange drilling as per IS - 1538 including transportation. SSR 2025-26, SL No.30(2) PH Items (PN 1.6) MPa (MAT-08097) For 100mm dia

Labour charges for fixing Air Valves including boring the mains and threading the bore fixing nipple etc. complete as per SSR 2025 - 2026, S.No.17, Public Health Items. For 100mm dia

Manufacture, supply, delivery and fixing of required M.S. fabricated Pipe and specials (Bends, Tees and Reducers etc.) using required size M.S. sheet and providing redoxide paint and anticorrosion paint two coats including cost of all materials, conveyance to work spot fixing in position and all labour charges fabrication charges etc. complete as per the instructions of the Departmental Authorities.

Supply and delivery of 300mm dia Key Road including cost of all materials, transportation to the work site, loading and unloading charges, and all handling expenses, complete in all respects as directed by the departmental authorities.

Details of Maximum amount reimbursable to the Contractor.

1) Provision for GST @18%

2) Provision for NAC @ 0.10%

Supply and delivery of "Resilient Seated Soft Sealing" gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40 / SG-400/15 or GGG-50 / SG-500/7 of Equivalent as per IS 1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and seals of NBR. The Valves should be Vaccume tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns) - RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN - 3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including transportation. Sluice Valve(PN 1.6) MPa For 150mm dia

Supply and delivery of "Resilient Seated Soft Sealing" gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40 / SG-400/15 or GGG-50 / SG-500/7 of Equivalent as per IS 1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and seals of NBR. The Valves should be Vaccume tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns) - RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN - 3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including transportation. Sluice Valve(PN 1.6) MPa For 300mm dia

Labour charges for lowering and keeping in position of 100mm dia DI D/F Sluice valve in the readymade trench true to alignment and gradient as per SS. and as directed by the Site Engineer. For 150mm dia NRV

Labour charges for lowering and keeping in position of 100mm dia DI D/F Sluice valve in the readymade trench true to alignment and gradient as per SS. and as directed by the Site Engineer. For 300mm dia

Jointing 100mm dia CI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead upto 500Mtrs and testing to required pressure complete (Reference to specifications BIS No.3114/1994) including hire charges of testing equipment, labour and materials needed for testing etc. complete as per S.S. and as directed by the Site Engineer. For 150mm dia & NRV

Jointing 100mm dia CI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead upto 500Mtrs and testing to required pressure complete (Reference to specifications BIS No.3114/1994) including hire charges of testing equipment, labour and materials needed for testing etc. complete as per S.S. and as directed by the Site Engineer. For 300mm dia

Supply delivery of Double Flanged Slant seat Swing Check Valve (NRV) with body and Disc of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with fully encapsulated in Vulcanized EPDM rubber & Fusion bonded Electro Static epoxy powder coating inside and outside color Blue RAL 5005 with Min. Coating thickness of 250 microns. The EPDM rubber & Epoxy rubber & Epoxy powder should conform to W 270 standards (Drinking water application) and face to face dimensions as per EN 558-1 / DIN 3202-F6 / IS 5312 & Flange connections as per IS:1538 excluding all duties, taxes and transportation. NRV (PN 1.6) MPa For 150mm dia

Supply & delivery of Tamper Proof DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40 / SG-400/15 or GGG-50/SG-500 / 7 or Equivalent as per IS 1865, IS:3896-2 with Food Grade Epoxy Powder Coating (EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005, All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS / PTFE / EPDM / NBR and generally conforming to DIN / BIS / AWWA standards (or) combination Flange drilling as per IS - 1538 including transportation. SSR 2025-26, SL No.30(2) PH Items (PN 1.6) MPa (MAT-08097) For 100mm dia

Labour charges for fixing Air Valves including boring the mains and threading the bore fixing nipple etc. complete as per SSR 2025 - 2026, S.No.17, Public Health Items. For 100mm dia

Manufacture, supply, delivery and fixing of required M.S. fabricated Pipe and specials (Bends, Tees and Reducers etc.) using required size M.S. sheet and providing redoxide paint and anticorrosion paint two coats including cost of all materials, conveyance to work spot fixing in position and all labour charges fabrication charges etc. complete as per the instructions of the Departmental Authorities.

Supply and delivery of 300mm dia Key Road including cost of all materials, transportation to the work site, loading and unloading charges, and all handling expenses, complete in all respects as directed by the departmental authorities.