Renovation of prefabricated bitumen road on the left track between Km 0.000 to Km 3.200 of Mant branch.

Uprooting Jhunds and Moonj with disposal away from site all as directed by Engineer-in-Charge

Brick edging on both side of the road of first class bricks 7 cm wide 11 cm deep laid with mud mortar including labour & supply of bricks finished to the required template and in proper alignment and also including dressing and ramming the excavated earth as directed by the Engineer-in-Charge.

Providing, laying, Spreading and compacting stone aggregates of 45mm to 63 mm specific size to water bound macadam specification including spreading in uniform thickness, hand packing rolling with smooth wheel 80-100 kN roller in stages to proper grade and camber applying and brooming stone screening/ binding materials to fill up the interstices of coarse aggregates watering and compecting to required density (0-2).as per MORD specification no 405.2 as directed by Engineer-in Charge.

Providing, laying, spreading and compacting stone aggregates of 22.4-53 mm sizes to WBM specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 KN static roller in stages to proper grade and camber, applying and brooming, crushsable screening to fill-up the intcritices of coarse aggregate, watring and compacting th the required density grading 3 all as per specified MORD clause No. 401 and as directed by Engineer in Charge

Providing and applying tack coat with bitumen VG-10 uning bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom all as per Specified MORD clause No. 503 and as directed by lingincer-in-Charge

Providing, laying and rolling of open-graded promis carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared surface, by Mechanical Paver and hot mix plant all as Specified MORD clause No. 506 &509 and as directed by Engineer-in-Charge

Providing and laying premis seal coat comprising of an application of 6.7mm size store chipps premixed with bitumin binder by manual means with VG-10 Grade Bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C all as Specified MORD clause No. 508 and as directed by Engineer-in-Charge.

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass beads on Bituminous Surface Providing and Laying of Hot Applied Thermoplastic Compound 2.5 mm thick including Reflectorising Glass Beads @ 250 gms per sqm area. thickness of 2.5 mm in exclusive of surface applied Glass Beads as per IRC: 35-2015. The finished surface to be level, uniform and free from streaks and holes as directed by Engineer-in-Charge.

Providing & Fixing Sign Board/Steme ife excavation, carriage, painting, letter writting and crrect with C.C. i/c cost of labour T&P material etc. complection of the work as directed by Engineer-in-Charge.