Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.8 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹44.5 L+₹3.7 L (9.12%)Rejected-AOC NOT AVAILABLE | NA | NA | 121004 | L2 | Rejected-AOC Rejected | |
| 3 | L3₹45.7 L+₹4.9 L (12.0%)Rejected-AOC HIMACHAL PRADESH | L3 | Rejected-AOC Rejected |
Tender Value
₹45.7 L
EMD Value
₹91,350
Closing Date
3 Feb 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer, HIMUDA Divn. Mandi
Executive Engineer, HIMUDA Divn. Mandi
Construction of additional rooms for Excise and Taxation Department at Bilaspur Distt Bilaspur HP including internal and external WS SI Co 5000 liters capacity RWHT and development of site
2023_HIMUD_67627_1
HIMUDA-MD-E-148-2023
Open Tender
Civil Works
Item Rate
180 days
Bilaspur
Please refer to tender documents
8 documents required · 8 mandatory
₹1,770
₹91,350
Yes
10 Mar 2023
27 Jan 2023
4 Feb 2023
28 Jan 2023
3 Feb 2023
28 Jan 2023
Amount
Cutting in earth work through mechanical means in all heights/depths and in all kinds of soil such as kankar, moorum, shingal and decomposed or soft rock, hard rock i.e. their intermediate classification and chiselling/wedging out rock where blasting prohibited including saturated soils and filling in embankments etc. where necessary and disposal of all excavated unserviceable material in all leads and lifts including through mechanical transportation, the disposal of the unserviceable material will be done on approved dumping site. Any damage to private/public property during execution will be restored by the contractor whatsoever the nature of the same may be. The serviceable material will be stacked in specified dimensions in all leads and lifts as per the direction of the Engineer-in-charge.
Excavation in foundations, trenches etc. in all kinds of soils such as pick work, jumper work, and chiselling/wedging out of hard or soft rock up to all heights stacking the excavated soil not more than 3 meters clear from the edge of excavation and then returning the stacked soil in 15 cms. layers, when required into plinths, sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer-in-charge in all leads and lifts.
Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete including carriage of material in all leads and lifts.
Providing form work with steel plates 3.15mm thick welded with angle iron frames 30x30x5mm so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies heights of propping and centering below supporting floor to ceiling in all heights and removal of the same for in-situ reinforced concrete and plain concrete work including carriage of materials in all leads and lifts.
Foundations, footings, bases of columns and the like mass concrete.
Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors etc. up to 200 mm in thickness.
Vertical surfaces such as walls (any thickness) partitions and the like including attaached pillasters buttresses, plinth and string courses and the like.
Columns, pillars, posts and struts, square rectangular or polygonal in plan.
Beams, cantilever, girders and lintels. Sides and soffits of beam, beam haunchings cantilevers, bressumers and lintels not exceeding 1 mtr in depth in all heights from floor.
Edges of slabs and breaks in floors and walls:- Under 20 cm; wide.
Providing and laying cement concrete 1:4:8(1cement: 4sand:8graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of material in all leads and lifts.
Providing and laying cement concrete 1:6:12 (1cement: 6sand: 12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centering and shuttering in foundation and plinth including carriage of material in all leads and lifts.
Providing and laying cement concrete having strength of M-20 mixed Design aggregate mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work including cariage of material in all leads and lifts.
Foundations, footings, bases of columns and the like mass concrete.
Suspended floors, roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers lintels in all heights.
Columns, pillars posts and struts upto floor all level.
Walls (any thickness but not less than 0.10 metre thickness) including attached pilasters buttersses, plinth string courses etc from top of foundation upto floor two level.
Providing and laying mechanically mixed vibrated reinforced cement concrete of mix design to have cheracterstic strength of M-20 grade for reinforced concrete chajjas not exceeding 10 cm . Thickness up to all heights including finishing the exposed surfaces with cement morter 1:3 (1 cement:3 sand) to give a smooth & even surface,centring/form work and curring complete excluding cost of reinforcement including carriage of material in all leads and lifts.
Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete including cost of binding wire up to all heights including carriage of material in all leads and lifts.
Providing and laying upto all floor level reinforced cement concrete 1:2:4 (1 cement : 2 Sand : 4 graded stone aggregate 20mm nominal size) to give a smooth and even surface including centring and shuttering etc. but excluding cost of reinforcement including carriage of material in all leads and lifts. in : Mouldings as in cornices windows sills etc. exceeding 15cm in girth
Providing and laying cement concrete 1:8:16(1cement: 8sand:16graded stone aggregate 20mm nominal size ) and curing complete on slab and floor excluding the cost of form work screed laid under flooring including carriage of material in all leads and lifts.
Applying cement slurry on R.C.C. slab or cement concrete work using 2.75 kg of cement per sq. metre of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surface complete including carriage of material in all leds and lifts.
Providing throating or plaster drip and moulding to R.C.C. chajjas including carriage of material in all leads and lifts.
Brick work using 2nd class common burnt clay building bricks in superstructure above plinth level up to all heights, in cement mortar 1:6(1cement:6sand), including carriage of material in all leads and lifts.
Half brick masonry using 2nd class common burnt clay building bricks in superstructure above plinth level up to all floor level in cement mortar 1:4(1cement:4sand) including carriage of material in all leads and lifts.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:5:10 (1 cement : 5 coarse sand): 10 graded stone aggregate 40 mm nominal size) including carriage of material in all leads and lifts.
Providing weep holes in brick masonry/stone masony/plain reinforced concrete abutment, wing wall, return wall with 100mm dia PVC pipe extending through the full width of structures with slope of 1 (V) : 20 (H) towards drawing face complete as per drawing and technical specification including carriage of material in all leads and lifts.
Random rubble masonry/polygonal rubble masonry (un-coursed/brought to course) with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12(1cement:6sand:12 graded stone aggregate 20 mm nominal size) at plinth level in cement mortar 1:6(1cement:6sand) including carriage of material in all leads and lifts.
Stone filling behind retaining walls including carriage of material in all leads and lifts.
Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position 2nd class deodar wood including carriage of material in all leads and lifts.
Providing and fixing 40mm thick 2nd class deodar wood panelled door shutters having styles and top rail 100mm width, lock rail 150mm wide and bottom rail 200mm wide with panel insertion of 12mm thick both side commercial veneered flat pressed three teak wood particle board exterior grade(Grade-I)confirming to IS 3097-1986 and bounded with BWP type synthetic resin confirming to IS 848-1974 including providing and fixing 2nd class deodar wood chamfered edged beading of size 38x20mm along the panels on both face of shutters and providing wooden cleats and ISI marked black enamelled MS butt hinges with necessary screws all complete as per drawing , specification and instructions of Engineer-in-charge including carriage of material in all leads and lifts.
Providing and fixing 40mm thick, 2nd class deodar wood single/double leaf shutters for windows, having styles and top rail and bottom rail 75mm width and chamfered edged 2nd class deodar wood moulding 20x12mm for glass panes complete including the cost of glass panesand bright finished black enamelled iron butt hinges with necessary screws, including carriage of material in all leads and lifts.
Providing and fixing 40 mm thick, 2nd class deodar wood wire gauge shutters using galvanized MS wire gauge of IS gauge designation 85 –G with wire of dia 0.56mm for doors, windows and clerestory windows and providing and fixing 2nd class deodar wood chamfered edged beading of 20x12mm including bright finished black enamelled iron butt hinges with necessary screws complete as per drawing and specification and instruction of the Engineer- In- Charge including carriage of material in all leads and lifts. .
Providing and fixing M.S. grills of required pattern in wooden frames of windows etc. with M.S. flats square or round bars with rounded headed and nuts welded or by screws including carriage of material in all leads and lifts.(a)Plain grill
Providing 40x3mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs embedding in cement concrete block 30x10x15cm in cement concrete 1:3:6 (1cement:3sand:6graded stone aggregte 20mm nominal size) including carriage of material in all leads and lifts.
Providing and fixing square edges cover fillets (beading) 19mmx6mm section including mitring at junctions with wood screws and nails complete 1st class deodar wood including carriage of material in all leads and lifts.
Providing & fixing oxidized aluminium sliding door bolts with nuts and screws etc. complete including carriage of material in all leads and lifts.
Providing & fixing oxidised aluminium tower bolts (barrel type) with necessary screws etc. complete including carriage of material in all leads and lifts.
Providing & fixing oxidized aluminium handles with the necessary screws etc. complete.including carriage of material in all leads and lifts.
Providing & fixing oxidized bright finished hard drawn hooks and eyes.including carriage of material in all leads and lifts. 150mm.
Providing & fixing 100mm bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete,including carriage of material in all leads and lifts.
Providing and laying Digital tiles in skirting risers of steps and dado 12 mm thick cement mortar 1:3 (1 cement :3 sand) and jointed with cement slurry including carriage of material in all leads and lifts.
Cement concrete flooring 1:2:4(1cement:2sand:4graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement including carriage of material in all leads and lifts:- 40 mm thick.
40mm thick.
50 mm thick.
Providing and fixing glass strips in joints of terrazzo floors 40 mm wide and 4 mm thick including carriage of material in all leads and lifts.
Providing and laying granite stone in flooring 20mm (average) thickness basae of cement mortar 1:3(1 cement:3 Sand ) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete;-20mm thick. including carriage of material in all leads and lifts.
Providing and fixing 10mm thick antiskid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalent 600x600x10mm thick manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1cement:3sand) jointed with cement slurry mixed with pigment to match the shadeof tiles as required complete including carriage of material in all leads and lifts.
Providing and laying Duro stone vetrified tiles any size /coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete .including carriage of material in all leads and lifts.
Providing and laying Duro stone vetrified tiles any size/coloured of required shade in skirting risers of steps and dados on12mm thick cement mortar 1:3 (1cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including carriage of material in all leads and lifts.
Providing and laying 60 mm thick heavy duty precast cement concrete inter locking paver blocks vibro compacted upto M-50 grade i/c border or kurb block grey or coloured over sub-base off concrete with 25mm thick average thickness of cement mortar 1:4(1 cement:4sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete (Subbase concrete floor to be paid for saperatly) including carriage of material in all leads and lifts.
Providing and fixing on wall faces PVC (D-Plast) for rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete. including carriage of material in all leads and lifts;- 150mm dia pipes
Providing and fixing m.s.holder bat clamps of approved design to C.I. or S.C.I pipes embeded in and including cement concrete blocks 10 x10x10 cm of 1:2:4:mix (1 cement 2 sand 4 stone graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the wal etcincluding carriage of material in all leads and lifts;-150 mm dianetre for C.I.pipe
Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete including carriage of material in all leads and lifts.
PVC Plain bend 150mm dia
PVC shoe 150mm dia
Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge
Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint including carriage of material in all leads and lifts.
In beams joists channels ,angles , tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like.
In gratings framed guardbars,ladders,railling,brackets and similar works.
6mm Cement plaster to ceiling including carriage of material in all leads and lifts; - In Cement mortar 1:3(1Cement:3 Sand)
15mm cement plaster in single coat on fair side of brick / concrete /stone walls for exterior plastering upto all heights including arises, internal rounded angles, and / or rounded angles not exceeding 80 mm in girth and finished even and smooth including carriage of material in all leads and lifts.
In cement mortar 1:3 (1cement: 3sand)
In cement mortar 1:6 (1cement: 6 sand)
20 mm cement plaster in single coat on rough side of brick/stone/concrete masonry for interior/exterior plastering upto all heights including arises, internal rounded angles, champhers and / or rounded angles not exceeding 80 mm in girths and finished even and smooth in cement mortar 1:6 (1 cement :6 sand) including carriage of material in all leads and lifts.
Extra over item no. 46.01 for finishing with a floating coat of neat cement slurry including carriage of material in all leads and lifts.
Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated on ceiling and/or sloping roofs. surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer including carriage of material in all leads and lifts.
Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer including carriage of material in all leads and lifts.
Providing chases 75mm wide 50mm deep (average size) in walls for conduit pipes and filling the same with cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregate 20 mm and down gauge) after the conduit pipe is laid (excluding the cost of conduit pipe)including carriage of material in all leads and lifts.
Applying a priming coat over new steel and other metal surfaces after and including preparing the surface by thoroughly cleaning oil, grease,dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete including carriage of material in all leads and lifts:- With ready mixed priming paint brushing red lead. Red/oxide/zinc oxide chrome.
Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give fair and smooth surface including cleaning the surface of all dirt, dust, dust and other foreign matter:-Enamel paint other than white including carriage of material in all leads and lifts.
Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering and knotting Ready mixed paint brushing wood primer pink including carriage of material in all leads and lifts.
Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint to give fair and smooth surface including cleaning the surface of all dirt, dust and other foreign matter, sand papering and stopping including carriage of material in all leads and lifts:- With white/ other than white enamel paint.
Applying Birla white wall care putty over plaster surface after througly brushing the surface free from mortar drops ,dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete, including carriage of material in all leads and lifts.
Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge. including carriage of material in all leads and lifts.
1216 (16mm O.D.) outer Dia
Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge.
1620 (20mm O.D.) outer Dia
Providing and laying in trenches, galvanised mild steel tubes (medium grade), tube fittings (earth work in trenches to be measured and paid separately) including carriage of material in all leads and lifts:- 20mm nominal bore.
Making connection of galvanized steel distribution branch with galvanized mild steel main 20 to 40mm nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of material in all leads and lifts.
Providing and fixing PVC water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level including carriage of material in all leads and lifts;-1000 litres net capacity tank
Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.
110 mm dia.
75 mm dia.
Providing and fixing PVC single equal branch with ovel access door, ISI marked insertion rubber washer 3mm thick bolts and nutscomplete including fixing with approved adhsive etc. complete including carriage of material in all leads and lifts.
110 mm dia
75 mm dia
Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.
110 mm dia.
75 mm dia.
Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.
110 mm dia.
75 mm dia.
Providing and fixing PVC cowl ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.
110 mm dia.
75 mm dia.
Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete including carriage of material in all leads and lifts.
110 mm dia
75 mm dia
Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of material in all leads and lifts;-110 mm X 75 mm..
Providing & fixing vitreous china wash down, water closet (European type W.C. pan ) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement ; 1 sand ) Seat and cover to be measured and paid for separately) including carriage of material in all leads and lifts;- Ordinary closet
Providing and fixing PTMT coloured/ white high density polyethylene / poly propylene 10 litres capacity ( full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) including carriage of material in all leads and lifts
Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.
110 mm dia
75 mm dia
Providing & fixing vitreous China wash basin with single/double hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings including carriage of material in all leads and lifts.;- Flat back 550mmx400mm.
Providing & fixing vitreous China pedestal for wash basin complete recessed at the back for the reception of pipes and fittings including carriage of material in all leads and lifts.
Providing & fixing C.P. Brass waste for wash basin or sink including carriage of material in all leads and lifts;-32mm dia
Providing & fixing M.I. union for wash basin or sink 32mm dia confirming to BIS specification including carriage of material in all leads and lifs.
Providing and fixing 100mm dia chromium plated grating of superior quality for floor, gully or nahani trap including carriage of material in all leads and lifts.
Providing and fixing G.I./M.I Union of following sizes (where not included in the items) including carriage of material in all leads and lifts.
Providing and fixing 32 mm P.V.C. waste pipe for wash basin or sink including brass check nut including carriage of material in all leads and lifts.
Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers including carriage of material in all leads and lifts;-white plastic seat and cover.
Providing and fixing PTMT jet spray of approved quality and colour with one metre tube including carriage of material in all leads and lifts .
Providing & fixing 600mm x 120 mm glass shelf with C.P. Brass bracket and guard rail complete, fixed to wooden plugs with C.P. Brass screws including carriage of material in all leads and lifts.
Providing & fixing C.P.Brass toilet paper holder including carriage of material in all leads & lifts.
Providing & fixing 600mm x 450 mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers including carriage of material in all leads and lifts.
Providing & fixing C.P. Brass Towel rail complete with C.P. Brass brackets fixed towooden plugs with C.P. Brass screws including carriage of material in all leads and lifts;-600mmx20mm
Providing and fixing brass full way valve with wheel including carriage of material in all leads and lifts.
15mm nominal bore
20mm nominal bore
Providing & fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws including carriage of material in all leads and lifts.
Providing & fixing C,P brass pillar tap with capastan head including carriage of material in all leads and lifts;-15mm dia
Providing & fixing C,P brass bib tap short body with capastan head including carriage of material in all leads and lifts;-15mm dia
Providing & fixing C.P. brass angle valve 15mm without Nuts and pipe including carriage of material in all leads and lifts
Cutting holes through existing brick/stone work including making good the same in cement mortar 1:6( 1cement:6 sand) per cms. Depth of cutting , including carriage of material in all leads and lifts :i) Holes up to and including 400 sqcm in area.
Constructing man hole with RCC top slab in 1:2:4 mix (1cement:2sand: 4graded stone aggregate 20mm nominal size ) Foundation concrete 1:4:8 (1cement : 4sand : 8 graded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortor 1:3(1 cement:3 sand) finished with a floating coat of neat cement and including making channels in cement concrete 1:2:4 mix (1cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished smooth complete including curing and testng.(a) Inside size 800mm x 800mm and 500mm deep including S.F.R.C. frame and cover medium duty 500mm diametre internal size.With 200mm thick walls of brick masnoey using common burnt clay building bricks in cement mortor 1:3 (1 cement :3sand) including carriage of materials in all leads and lifts.
Supplying and fixing cast iron cover with frame for man holes of internal diamensions 450x610 mm rectangular C,I, cover (light duty) single seal pattern the weight of cover and frame to be not less than 38 kg ( weight of cover 23kg and weight of frane 15kg) including carriage of material in all leads & lifts.
MNBN Enterprises
Sada Nand
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .