Construction of Shed & Room For Firing Simulator with Container in PTC Campus at Junagadh (Including Electric)

Name of Work : Construction of Shed & Room For Firing Simulator with

Container in PTC Campus at Junagadh (Including Electric)

:: SCHEDULE B ::

Statement showing the approximate quantities for the items of the above work to be carried out and approximate cost put to

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

1 Excavation for foundation upto 1.50mt. depth including sorting out 9.00 Cum 121.72 Rupees One Hundred

and stacking of useful materials and disposing of the excavated Twenty One And Paise

stuff upto any lead & Lift. [A] Loose or Soft Soil. Seventy Two Only

2 Excavation for foundation upto 1.50mt. depth including sorting out 18.00 Cum 155.60 Rupees One Hundred

and stacking of useful materials and disposing of the excavated Fifty Five And Paise

stuff upto any lead & Lift. [B] Dense or Hard Soil. Sixty Only

3 Excavation for foundation upto 1.50mt. depth including sorting out 58.00 Cum 273.50 Rupees Two Hundred

and stacking of useful materials and disposing of the excavated Seventy Three And

stuff upto any lead & Lift. [D] Soft Rock Paise Fifty Only

4 Providing & laying Cement Concrete 1:4:8 ( 1 cement : 4 coarse 11.00 Cum 2742.27 Rupees Two Thousand

sand : 8 M/C graded stone aggrigates of 20 mm nominal size) Seven Hundred Forty

curing complete including cost of formwork in FOUNDATION AND Two And Paise Twenty

PLINTH. Seven Only

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

5 Providing and laying TMT Steel reinforcement (Grade Fe- 5890.00 Kg 76.52 Rupees Seventy Six And

500/500D) for RCC work including cutting,bending,binding and Paise Fifty Two Only

placing in position etc.comp for all floor. Steel must be used as per

approved material list of Gsphcl.

6 Providing & laying controlled cement concrete M- 250 and finishing 11.00 Cum 4722.49 Rupees Four Thousand

smooth with curing etc.complete including the cost of formwork of Seven Hundred Twenty

plywood only with fair finish & Proping must be of steel only so as Two And Paise Forty

to give a fair finish but excluding the cost of reinforcement for Nine Only

R.C.C. work in Column Footing. Rate are also Inclusive Of

Providing & Mixing Plastisizer Of Approved Make & In Proportion

As per mix design.

7 Providing & laying controlled cement concrete M- 250 and finishing 8.00 Cum 9363.25 Rupees Nine Thousand

smooth with curing etc.complete including the cost of formwork of Three Hundred Sixty

plywood only with fair finish & Proping must be of steel only so as Three And Paise Twenty

to give a fair finish but excluding the cost of reinforcement for Five Only

R.C.C. work in Column Up to Plinth for any cross sectional area

at Rate are also Inclusive Of Providing & Mixing Plastisizer Of

Approved Make & In Proportion As per mix design.

8 Filling available excavated earth (excluding rock ) in trenches, 52.00 Cum 135.56 Rupees One Hundred

plinth sides of foundation etc. in layers not exceeding 20 cms. in Thirty Five And Paise

depth consolidation each deposited layer by ramming and watering. Fifty Six Only

9 Filling in foundation and plinth with murrum or selected soil in 92.00 Cum 298.79 Rupees Two Hundred

layers of 20 cm. Thickness including watering, ramming and Ninety Eight And Paise

consolidating etc. complete. Seventy Nine Only

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

10 Providing & laying controlled cement concrete M- 250 and finishing 8.00 Cum 7318.48 Rupees Seven

smooth with curing etc.complete including the cost of formwork of Thousand Three

plywood only with fair finish & Proping must be of steel only so as Hundred Eighteen And

to give a fair finish but excluding the cost of reinforcement for Paise Forty Eight Only

R.C.C. work in Plinth Beam for any cross sectional area at Rate

are also Inclusive Of Providing & Mixing Plastisizer Of Approved

Make & In Proportion As per mix design.

11 Brick work using common burnt clay building bricks having 15.00 Cum 4172.60 Rupees Four Thousand

crushing strength not less than 35 Kg/Sq.cm.in foundation and One Hundred Seventy

plinth in cement mortar 1:6 (1-cement;6-coarse sand), Two And Paise Sixty

Conventional bricks. Bricks with frog only shall be used. Only

12 Supplying and Filling in plinth with sand under floors including 23.00 Cum 477.03 Rupees Four Hundred

watering, ramming, consolidation and dressing etc.complete. Seventy Seven And

Paise Three Only

13 Applying general insecticide pest control treatment to floors, cup 204.00 Sqm 38.70 Rupees Thirty Eight And

boards etc., including labour, material etc. complete. Paise Seventy Only

14 Providing and laying damp proof course 25mm thick cement 10.00 Sqm 318.78 Rupees Three Hundred

concrete 1:2:4 (1-Cement : 2 coarse sand : 4 stone aggregate 10 Eighteen And Paise

mm nominal size) and curing Complete Seventy Eight Only

15 Providing and laying cement concrete 1:5:10 ( 1 cement ; 5 18.50 Cum 2581.11 Rupees Two Thousand

coarse sand; 10 hand broken stone aggregate 40mm nominal size) Five Hundred Eighty

and curing complete including cost of form work in foundation and One And Paise Eleven

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

16 Providing & laying controlled cement concrete M-150 and finishing 36.00 Cum 4040.21 Rupees Four Thousand

smooth with curing etc.complete including the cost of formwork of Forty And Paise Twenty

plywood only with fair finish & Proping must be of steel only so as One Only

to give a fair finish but excluding the cost of reinforcement for

R.C.C. work in Grade slab for any cross sectional area at Rate

are also Inclusive Of Providing & Mixing Plastisizer Of Approved

Make & In Proportion As per mix design.

17 Providing & laying controlled cement concrete M- 250 and finishing 6.00 Cum 10819.77 Rupees Ten Thousand

smooth with curing etc.complete including the cost of formwork of Eight Hundred Nineteen

plywood only with fair finish & Proping must be of steel only so as And Paise Seventy

to give a fair finish but excluding the cost of reinforcement for Seven Only

R.C.C. work in Column for any cross sectional area at Ground

Floor Rate are also Inclusive Of Providing & Mixing Plastisizer Of

Approved Make & In Proportion As per mix design.

18 Providing & laying controlled cement concrete M- 200 and finishing 3.00 Cum 6110.86 Rupees Six Thousand

smooth with curing etc.complete including the cost of formwork of One Hundred Ten And

plywood only with fair finish & Proping must be of steel only so as Paise Eighty Six Only

to give a fair finish but excluding the cost of reinforcement for

R.C.C. work in Lintel Band for any cross sectional area at

Ground Floor. Rate are also Inclusive Of Providing & Mixing

Plastisizer Of Approved Make & In Proportion As per mix design.

19 Brick work using common burnt clay building bricks having crushing 34.00 Cum 4451.53 Rupees Four Thousand

strength not less than 35 Kg/Sq.cm.in Ground Floor in cement Four Hundred Fifty One

mortar 1:6 (1-cement;6-coarse sand), Conventional bricks.Bricks And Paise Fifty Three

with frog only shall be used. Only

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

20 Providing & laying controlled cement concrete M-200 and finishing 1.00 Cum 9715.75 Rupees Nine Thousand

smooth with curing etc.complete including the cost of formwork of Seven Hundred Fifteen

plywood only with fair finish & Proping must be of steel only so as And Paise Seventy Five

to give a fair finish but excluding the cost of reinforcement for Only

R.C.C. work in finishing smooth for R.C.C. Chhajjas having any

thickness up to floor two level including finishing the exposed

surface with cement mortar 1:3 ( 1 cement : 3 fine sand) to give a

smooth surface for ALL FLOOR. Rate are also Inclusive Of

Providing & Mixing Plastisizer Of Approved Make & In Proportion

As per mix design.

21 Providing & laying controlled cement concrete M- 200 and finishing 2.00 Cum 9079.22 Rupees Nine Thousand

smooth with curing etc.complete including the cost of formwork of Seventy Nine And Paise

plywood only with fair finish & Proping must be of steel only so as Twenty Two Only

to give a fair finish but excluding the cost of reinforcement for

R.C.C. work in Beam. for any cross sectional area at Ground

Floor Rate are also Inclusive Of Providing & Mixing Plastisizer Of

Approved Make & In Proportion As per mix design.

22 Providing 15 mm. thick cement plaster in single coat on wall for 165.00 Sqm 220.46 Rupees Two Hundred

interior plastering and finished even and smooth in C:M 1:4 (1 Twenty And Paise Forty

cement; 4 sand) including finishing with a floating coat of neat Six Only

cement slurry at Ground Floor.

23 Providing 20mm thick SAND FACED cement plaster on walls 249.00 Sqm 339.02 Rupees Three Hundred

above ground level consisting 12mm thick backing coat of C:M 1:3 Thirty Nine And Paise

(1 cement; 3 sand) and 8mm thick finishing coat of C:M 1:1 (1 Two Only

cement; 1 sand) etc. complete for any height. [Gutka Plaster only]

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

24 Providing & Laying 24" x 24" Double Charge vitrified 8 to 10 mm 11.00 Sqm 1513.90 Rupees One Thousand

thick tile flooring over 20 mm (average) base of cement mortar 1:6 Five Hundred Thirteen

( 1 cement: 6 coarse sand) on new surface orfixing on existing And Paise Ninety Only

flooring by adhesive including dismentaling of existing flooring and

material jointed with color cement slurry including finised with flush

pointing & cleaning the surface etc. size and shade as per

approved drawings or as per diection of engineer in charge.

25 Providing and laying 24" x 24" in Skirting riser of steps and dado 5.00 Sqm 1445.20 Rupees One Thousand

Double Charge vitrified 8 to 10 mm thick tile over 10 mm thick Four Hundred Forty Five

Cement plaster of cement mortar 1:3 (1 cement: 3 coarse sand) And Paise Twenty Only

jointed with color cement slurry including finised with flush pointing

& cleaning the surface etc. size and shade as per approved

drawings or as per diection of engineer in charge.

26 Providing & Laying 24" x 24" Double Charge vitrified 8 to 10 mm 49.00 Sqm 1453.19 Rupees One Thousand

thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( Four Hundred Fifty

1 cement: 6 coarse sand) on new surface or fixing on existing Three And Paise

flooring by adhesive including dismentaling of existing flooring and Nineteen Only

material jointed with color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for Anti Skid.

27 Providing and laying 25mm thick mirror Polished (Dimond Cut) 9.00 Sqmt 1108.30 Rupees One Thousand

Kota Stone Slab Flooring over 20mm thick base of cement mortar One Hundred Eight And

1:6 ( 1 cement : 6 coarse sand) laid over & jointed with grey cement Paise Thirty Only

slurry including rubbing & polishing etc. Complete as Directed By

Engineer In Charge For All Floors.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

28 P & F to Wall Ceilling and Floor SWR Rain Water pipe as Per IS- 14.00 Rmt. 323.15 Rupees Three Hundred

13592 of 90mm Dia Complete with Special flings, Compressor type Twenty Three And Paise

Fittings, Wall clips on wooden patty including making good the Fifteen Only

ceiling and floor on terrace rain water pipe shall be 90 mm Dia.

SWR horizontal pipe and vertical pipe and 90mm bend at the end

near by Ground level rate are Inclusive of all Necessary Fittings

required. [Pipe Fixing Single Pipe Bracket System with U Bolt

Rubber mounted for Pipe Supporting Clamping System or S4

Channel System (S4 Channel+Profile Backet + U Bolt For Multi

pipe fixing & paid Separately in Number Base] for 90 mm dia.

29 Provinding and Laying 18 mm thick Granite Stone Slab Flooring 6.00 Sqm 2158.45 Rupees Two Thousand

over 20mm thick average base of C.M. 1:6 (1cement : 6 coarse One Hundred Fifty Eight

sand) laid and jointed with grey cement slury including Rubbing and And Paise Forty Five

Polishing etc. Complete for All Floors. Only

30 Providing and laying Granite Slab (18 mm thick) of approved 5.00 Sqm 2247.24 Rupees Two Thousand

colour & quality & brand, one side polished flooring over 20 mm Two Hundred Forty

(average) base of cement mortar 1:6 (1 cement : 6 coarse sand) Seven And Paise

laid and jointed with grey cement slurry including rubbing, curing Twenty Four Only

including grooving, moulding, nosing of corners and mirror polishing

complete.For flooring of steps, stairs with treads & risers etc.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

31 Providing and Fixing Granite of Telephonic Black Colour 15 to 6.00 Sqm 2428.00 Rupees Two Thousand

18mm thick for jambs and sills of doors & windows using neat Four Hundred Twenty

cement slurry laid over 20 mm average base of cement mortar 1:1 Eight Only

(1 cement:1 Coarse Sand) and jointed with grey cement slurry

including racking (Tancha Work) rubbing and polishing,

scaffoldings, tools and tackles, scaffolding etc. complete. (with

base of neat cement) as per direction of Engineer in charge

including rounding the exposed edges as directed etc. Complete for

32 Providing and laying 25mm thick polished KOTAH STONE SLAB 150.00 Sqm 1009.30 Rupees One Thousand

FLOORING over 20mm average thick base of cement mortar 1:6(1 Nine And Paise Thirty

cement; 6 coarse sand) over and jointed with grey cement slurry Only

including rubbing and polishing etc. complete for All floors.

33 Providing and laying polished kota stone slab 25mm thick in risers 3.00 Sqm 1098.09 Rupees One Thousand

of steps,skirting Dedo and pillars laid on 10mm thick cement mortar Ninety Eight And Paise

1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury Nine Only

mixed with pigment to match the shade of slab including rubbing

and polishing etc. complete.

34 Steel work, welded in built up sections framed work includig cutting, 72.00 Quntl 9018.30 Rupees Nine Thousand

hoisting, fixing in position and paint. (A) In Beams and joints, Eighteen And Paise

channels angles Tees, flats, with connectiog plates or angle cleats Thirty Only

as in main and cross beams. Hip and jack rafters, purlins conneted

to common rafters and the like. Structural Steel material should

be used ISI marked only.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

35 Providing, Fabricating and fixing M.S. GRILL/GATE of approved 440.00 Kg 75.11 Rupees Seventy Five

pattern fabricated from M.S. flat,square bars, round bars,c-channel, And Paise Eleven Only

box pipe as per detail Drawings. Rate is inclusive of welding with

grinding smooth surface, two coats of Oil paint and one coat of

yellow Zinc primer coat of approved brand only. Oil paint shall be

Luxol Enamel paint of Berger Paint india limited. or asian paint

apcolite premium gloss Enamel of asian paint or Dulux premium

gloss enamel of dulux paint and nerolac synthetics enamel of

nerolac paint for all floor and at any height only. Used Structure

steel Mebmer ISI Mark Only.

36 Providing and Corrugated JSW Pre coated sheet roofing fixing with 368.00 Sqm 984.37 Rupees Nine Hundred

galvanised iron J or L hooks, Bolts and nuts 8mm Diameter with Eighty Four And Paise

bitumen and G. I. Limpet washer or G. I. Limpet washer with white Thirty Seven Only

lead complete excluding the cost of Purlins, Rafter and trusses.

37 Providing and Fixing 13mm Thick Heat Insulation fixing with proper 96.00 Sqm 575.00 Rupees Five Hundred

technic and material is approved brand with including cost of labour Seventy Five Only

& Required material as Per Engineer Incharge

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

38 Providing and fixing of Ridge flashing for roof panel shall be made 37.00 Rmt. 515.28 Rupees Five Hundred

out of 0.5 mm thick pre coated GI sheet . The Precoated sheet Fifteen And Paise

shall be of minimum 240 mpa steel grade confirming to IS Twenty Eight Only

14246:1995 and shall have zinc coating of minimum 120 gsm as

per IS:277:1992 , 57 microns epoxy primer on both side of the

sheet and polyester top coat 15-18 micron. The PPGI Sheet shall

have plastic protective guard film of minimum 25 microns to avoid

scratches during transportation. The ridge shall be fixed to the

steel members by pop rivet or self drilling/self stitching fastners @

maximum 450 mm c/c along length of capping/flashing etc

39 Providing and fixing 150mm wide 450mm over all semicircular plain 16.00 Sqm 575.56 Rupees Five Hundred

G.I.sheet class-3 gutter with Iron brackets 40mm x 3mm size Bolts, Seventy Five And Paise

Nuts, washers etc. including making necessary connection with rain Fifty Six Only

water pipes. (i) 0.80 mm thick Sheet

40 Providing and fixing window having extruded alluminum Colour 5.00 Sqm 1696.73 Rupees One Thousand

anodized section frame main outer size 63.50x38.10x1.95mm, @ Six Hundred Ninety Six

Wt 1.094 Kg/Rmt, horizontal two track member size 61.85mm And Paise Seventy

x31.75mm x1.20mm @ wt. of 0.695Kg/mt, vertical member of size Three Only

61.85mm x31.75mm x1.30mm @ wt. of 0.659Kg/mt with sliding

shutters of horizontal member size 40mm x18mm x1.29mm @ wt.

of 0.456Kg/mt, vertical member of size 40mm x18mm x1.29mm

@wt. of 0.456Kg/mt, @ Wt. 0.457Kg/mt with 5mm thick transparent

bronze colour tinted float glass with powder coated alluminum fitting

sand fixture sand transparent silicon sealant glas fixing to frame as

per details etcc omplete for window.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

41 Providing and fixing standared extruded of alluminium section of 1.00 Sqm 1163.92 Rupees One Thousand

size 63mm x 38.10mm x 1.2mm (Jindal Section :2434, @ Wt. One Hundred Sixty

0.643 Kg/mt) with colour anodized alluminium frame for ventilation Three And Paise Ninety

with 5 mm thick frosted glass as details etc complete for Two Only

42 Providing & Fixing extruded alluminium section 15 microns regular 5.00 Sqm 4174.70 Rupees Four Thousand

anodized (Coating with Matt finished and excellent outdoor One Hundred Seventy

durability) door with partly glazed 5mm clear float glass and partly Four And Paise Seventy

both sides prelaminated parial board of 12mm thick as per detailed Only

drawings and specificatio gaskets of EPDM quality shall be

Provided for weather toghtening along with the silicon sealents of

down corning / G.E. silicon / wackers germany of equivalent

complete etc as per approved by architect complete as per the

following section of jindal make or equivalent. [A] Frame

44.45 X 1.80 mm). [C] Shutter Top & side - 19581 (83.50 X 44.45 X

2.00 mm). [D] Middel & Bottom - 1964 (100 X 44.45 X 2.00 mm).

[E] Glazing clip -19352 (0.70 mm). [Half panelled & Half Glazed

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

43 Pro & Fix False ceiling of Plain gypsum board of gypsum india 60.00 Sqm 600.94 Rupees Six Hundred

Ltd.As per the specificaions and directives issued by the And Paise Ninety Four

company.The G.I. Sections for the frame work Should Be Of the Only

Company (gypsum india Ltd.)No local sections shall be used for the

framework company made section every 2'00" C/C both directives

of L section at wall face Which are hanging frame the M.S. framed

structure weight 8 kg/sqm (10'6" ht framed the floor level) with

fasteners as per the comp.instructions 12mm gypsum board tiled

properly screwed & concealed with tape parameters on all four

sides of the light fixtures.the ceiling shall be of totally in line, level &

where the tapes are fixed on joints, no joints shall be visible.

44 Finishing wall with Plastic Emulsion Paint on wall Surfaces (Two 165.00 Sqm 179.92 Rupees One Hundred

Coats) to give an Required shape and even shade after thoroughly Seventy Nine And Paise

brushing the surface to remove all dirt, and remains of loose Ninety Two Only

powdered materials etc. complete. Rate are inclussive of Applying

Two Coats of Lappy (Putty) and One Coat of Primer on New wall

Surfaces to give an even shade including throughly brushing the

surface free from mortar droppings and other foreign matter and

sand papered smooth. Putty, Primer and Plastic Emulsion Paint

Shall be used as per approved material list by GSPHC.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

45 Finishing walls with Weather Proof Exterior Emulsion Paint on 249.00 Sqm 153.35 Rupees One Hundred

Wall Surfaces (Two Coats) over and above Applying one coat of Fifty Three And Paise

Primer to give an Required shape and even shade after thoroughly Thirty Five Only

brushing the surface to remove all dirt, and remains of loose

powdered materials etc. complete. Primer and Exterior Emulsion

Paint shall be used as per approved material list of GSPHCL.

46 Providing a I.S.I. mark 7 levers three key brass pad lock of 2.00 No. 211.86 Rupees Two Hundred

NAVATAL (Godrej) make 65mm dia on completion of project. Eleven And Paise Eighty

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

47A Providing and erecting Point wiring with 1.1 KV grade ISI marked 30.00 Point 481.00 Rupees Four Hundred

2 X 1.5 sq. mm copper PVC insulted FRLS wire with 1.5 sq. mm Eighty One Only

(green) copper PVC insulated FRLS wire for earth continuity in FIA

approved ISI mark medium class white colour 20/25 mm dia.

embossed rigid PVC pipe with PVC fitting fixed with adhesive

solution erected on/in Brick Wall / slab along with continuous G.I.

fish wire to draw wires and laid in approved manner zari for PVC

pipe and boxes shall be filled with cement mortar and finishing the

surface to match the wall / ceiling complete with approved make 5/6

Amp. ISI make modular type switch and accessories mounted in

G. G.I. company fabricated metallic box covered with appropriate

front plate modules erected flushed with wall / ceiling with

necessary modular lamp holder / modular ceiling rose / HD

Connector (make & model approved by EIC and matching colur

with switches accessories) as directed for concealed wiring. Light

point. Cat.-III.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

Necessary sheet / tape / polythene / sand must be erected or filled

in all box to prevent mortar going into the box. Length of point

wiring must not increase than 10 mtr. For that necessary switch

boards and their locations must be finalised before execution by

agency otherwise payment will not be done for extra long point.

(For future extention, if required, agency has to erect one higher

size metal box and modular plate as per instruction of EIC. Cost of

blank plate shall be paid as per tender item) [Wire must be having

box packing] [This item include cleaning (inside/outside) of all G.I.

switch boards, electric point box, fan box, MCBDB & box cutting

plaster finishing for modular plate B14 without any gap] [conductor

resistance should be as per IS:8130/1984]

47B For Fan Point (with 6 A. Modular type switch and two module hum 4.00 Point 668.00 Rupees Six Hundred

free EME Five step type Electronic fan regulator both having ISI Sixty Eight Only

47C For separate Point (with 6 Amp. Switch & 5 pin socket both are 7.00 Point 505.00 Rupees Five Hundred

with ISI Mark) Cat.-III Five Only

47D For Looped on switch board (with 6 Amp. Switch & 5 pin socket 15.00 Point 255.00 Rupees Two Hundred

both are with ISI Mark) Cat.-III Fifty Five Only

48A Providing and erecting 1.5 mm thick FIA approved and ISI mark 150.00 Mtr. 24.00 Rupees Twenty Four

(embossed) RIGID white Colour PVC PIPES of following size Only

complete erected with necessary PVC fittings & Junction boxes

fixed with adhesive solution concealed in wall / slab along with

contineous fish wire to draw mains, laid in approved manner with

plastering by cement mortar & finishing the surface to match the

wall / ceiling. 20 mm dia.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

48B 25 mm dia. 100.00 Mtr. 33.00 Rupees Thirty Three

48C 32 mm dia. 50.00 Mtr. 54.00 Rupees Fifty Four Only

49A Providing and laying Mains with FRLS PVC Insulated wire ISI 150.00 Mtr. 62.00 Rupees Sixty Two Only

marked 1.1 KV grade with FIA approved ISI mark medium class

20/25/32 mm dia. embossed rigid PVC pipe with PVC fitting fixed

with adhesive solution to be erected on/in brick wall / slab along

with continuous G. I. fish wire to draw mains laid in approved

manner with plastering by cement mortar & finishing the surface to

match the wall / ceiling complete with FRLS PVC insulated wire for

earth continuity. (Approved ISI make only) [a] 2 x 1.5 sq.mm.

FRLS copper multi stranded conductor mains with 1.5 sq.mm.

FRLS copper multi stranded conductor for earthing as per

standard colour code. [conductor resistance should be as per

49B 2 x 4.0 sq.mm. FRLS copper multi stranded conductor mains with 50.00 Mtr. 111.00 Rupees One Hundred

2.5 sq.mm. FRLS copper multi stranded conductor for earthing as Eleven Only

per standard colour code. (Conductor resistance should be as per

49C 2 x 6.0 sq.mm. FRLS copper multi stranded conductor mains with 80.00 Mtr. 146.00 Rupees One Hundred

2.5 sq.mm. FRLS copper multi stranded conductor for earthing as Forty Six Only

per standard colour code. [conductor resistance should be as per

50 Providing & fixing 20 mm. dia. PVC insulated G.I. Corrugated 20.00 Mtr. 30.95 Rupees Thirty And Paise

Flexible pipe with necessary socket, PVC bushes, saddle, Check- Ninety Five Only

nuts etc. complete of following sizes.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

51 Providing & fixing 25 mm. dia. PVC insulated G.I. Corrugated 20.00 Mtr. 37.14 Rupees Thirty Seven

Flexible pipe with necessary socket, PVC bushes, saddle, Check- And Paise Fourteen

nuts etc. complete of following sizes. Only

52 Providing and fixing Plug Point wiring with 1.1 KV grade ISI 14.00 Point 738.00 Rupees Seven Hundred

marked approved make 2 x 2.5 sq.mm copper PVC insulated FRLS Thirty Eight Only

wire with 1.5 sq.mm (green) copper PVC insulated FRLS wire for

earth continuity in FIA approved ISI mark white colour medium

class 20/25 mm dia. embossed rigid PVC pipe with PVC fitting

fixed with adhesive solution erected in wall/slab along with

continuous G. I. fish wire to draw wires and laid in approved

manner zari for PVC pipe & boxes shall be filled with cement

mortar & finishing the surface to match the wall / ceiling complete

with 16 Amp Modular type Swich and accessories mounted in

G. GI company fabricated metallic box covered with appropriate

front plate modules erected flushed with wall. (a) 16 Amp.

Indicator switch & 1 No. 6/16 A universal socket white colour

suitable for 3 pin top duly both having ISI mark. (Necessary

sheet / tape / polythene / sand must be erected or filled in all box

To Prevent Mortor Going In To The Box) (Conductor resistance

should be as per IS:8130/1984) Cat.-III. (Conductor resistance

should be as per IS:8130/1984)

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

53 Providing and fixing Plug Point wiring with approved ISI marked 4.00 Point 863.00 Rupees Eight Hundred

1.1 kv 2 x 4.0 sq.mm copper PVC insulated FRLS wire with 2.5 Sixty Three Only

sq.mm (green) copper PVC insulated FRLS wire for earth continuity

in FIA approved ISI mark white colour medium class 20/25 mm

dia. embossed rigid PVC pipe with PVC fitting fixed with adhesive

solution erected in wall/slab along with continuous G.I. fish wire to

draw wires and laid in approved manner. zari for PVC pipe &

boxes shall be filled with cement mortar & finishing the surface to

match the wall / ceiling complete with 1 No. 16 Amp. Modular type

Indicator Swich and 1 no. 16 Amp. universal 3 pin socket

suitable for 3 pin top duty. [Both Having ISI mark must] mounted

in 20 G. G.I. company fabricated metallic box covered with

appropriate front plate modules erected flushed with wall.Above

accessories will be erected combined or separately as per site

requirement and instruction of EIC. Cat.-III. (A.C. POINT)

(Necessary Sheet Must Be Erected On All Box To Prevent Mortar

Going Into The Box) (Conductor resistance should be as per

54 Providing and erecting following type of Modular Type 30.00 Each 25.00 Rupees Twenty Five

Accessories mounted with 20 G G. I. company fabricated metalic Only

box, single mounting base frame covered with textured / metallic

front plate, modules erected with necessary connection. As desired

by Engineer in charge. Blank plate single Cat.-III.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

55 Providing & Erecting 2.0 mtr long Earthing system by making 4.00 Each 7025.00 Rupees Seven

minimum bore of 225 mm dia in soft soil. Suitable for doing pipe-in- Thousand Twenty Five

pipe technology earthing.Earthing electric rod must be made from Only

Corrosion free Hot dip galvanizing pipes having following

(A) Earthing Electrode: outerpipe:- 88 mm minimum O.D., ISI 'B '

Class ISI mark of Reputed Brand, Inner pipe:- 42 mm minimum

O.D., Pipe B Class ISI mark reputed Brand Terminal Size: 70mm X

100mm length, Terminal Should be made from inner pipe for that

pipe must be pressed and gave rectangular shape so its work as a

terminal.The hot deep galvanising must be done after above

process.Galvanised thickness must be minimum 75 micron any

where. SS Nut bolt:- 2 no.with washer suitable for 14mm dia. hole

must be provided at terminal. total minimum Weight(approx.) of

earth electrodewith inside conductive material minimum should be

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load &

dry form, Sulphar content:- <2%

(C) Back fill Compound:- Earthing compound should be capable to

retain moisture for long time Back Filling Compound weight is

(D) Chamber and cover:- Earthing chamber should be size of

mm X 400 mm X 400 mm depth and Cover should be heavy duty

cast iron with required size of 300 mm X 300 mm X 4 mm thick.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item

specification only] [OEM has to submit all detail & sample for

approved before supplying]

[Water must be poured in bore before starting earthing. Earthing

value must be measured with earth tester. Agency has to bring the

earth resistance to at least 02 ohms & voltage between neutral &

Earthing upto 02 volt. Agency has to maintain earthing & its value

for one year. Earthing must be done in the presence of A.E.

56 For Above Earthing Additional charges for boring in hard rock soil 4.00 Each 276.00 Rupees Two Hundred

(By Breaker) & filling soft soil in earth pit. (Certificate for soil have to Seventy Six Only

given by DEE/AE along with Photographs).

57 Supplying and erecting M.S./G.I. metal box having 16 Gauge 200.00 Sq. 5.94 Rupees Five And Paise

painted with red oxide be concealed in wall with necessary Inch Ninety Four Only

plastering & finishing with 3 mm thick laminated sheet with grooving

as directed of following depth 3" depth.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

58 Supplying and Erecting LED indoor fitting of approximately 4 5.00 Each 370.00 Rupees Three Hundred

feet long with LED of wat age 0.2W to 0.5W assemble on single Seventy Only

MCPCB with housing use as a heat sink shall be made from

Aluminum extrusion having enough strength (sample must be

approved by EIC) with polycarbonate diffuser with following

specification: (A) Company mark/name on the fitting.(B) Rated

input voltage and frequency: 220V to 240 VAC ; 50Hz. (C) Rated

input wattage: max. 24w (D) Rated input current : 0.2 Amp, (E)

Power Factor : Min. 0.90, (F) ATHD : Max. 15% , (G) Rated

Luminous flux: Min. 2420 lm, (H) CCT: 6500K, (I) CRI: Min. 80Ra,

(J) Driver Ef iciency: Min. 80%, (K) LED life span: Min. 50000 Hrs

@ L70, (L) Over Voltage protection: Withstand up to 440V/AC for

Hrs., (M) Surge protection : Min. 2KV, (N) IP rating: IP 20, (O) IK

rating : IK 02, (P) Short circuit , Open circuit & Reverse Polarity

Protection must be provided (Q) Fixing clamp design & strength

should be suf icient to hold the fitting erected on wall or ceiling., (R)

3 core copper wire of appropriate size with earthing connector

(Note:-The manufacturer/ authorized Channel partner of the

manufacturer has to submit 5 yrs free replacement Guarantee for

complete Fixture) [Approval will be given strictly subject to item

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

59 SITC of Indoor Commercial Recess / Surface mounted (IP20) 24 W 2.00 Each 751.00 Rupees Seven Hundred

Cool/Warm white Color LED Down lighter office Lighting Fifty One Only

Luminaire with separate potted driver with single piece pressure die

cast aluminium alloy housing with corrosion resistant powder

coated finish with PMMA/PS/Injection moulded Polycarbonate

diffuser with high brightness LED complete (only from Philips

Lumileds, CREE, Nichia, Bridgelux, Seoul & Osram) CRI > 80, with

24 W. The LED's should be mounted on metal core PCB for better

heat conduction and long life of LED. The Fixture should comply all

International Standarad third party (LM 79 for complete fixture,

LM80 for individual LED). The Fixture have protection like

miswiring, over voltage, over load, wrong wiring, THD < 15%,, P.F >

0.95, efficiency ≥ 90 lm/w & driver efficiency > 85%. For 24 W

fixture wide voltage range from 160 V to 270 V, 50/60 HZ @ 240V

application, 2 KV surge protection.

The fixure must have min. 2160 lumen light output. The fixture

should be provided with external separate Potted driver, latest Valid

BIS approved Luminaire and driver. The Fixture efficiency ≥

lumens/watt only for safety and performance. (L70 @ 30,000 Hrs.)

The fixture should be able to easily mount on POP / Grid false

ceiling. The Luminiare should be tested as per IP 20 and following

test reports should be submitted at the time of approval: heat

resistant test, thermal test, Ingress protection test, drop test,

Photobiological report with 3 core X 1.0 Sq.mm. flexible wire as per

site requirment [Note:-The manufacturer / authorized Channel

partner of the manufacturer has to submit 5 yrs. free replcement

Guarantee for complete Fixture]

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

60 SITC of Indoor Commercial Recess/ Surface mounted (IP20) Max. 9.00 Each 2071.00 Rupees Two Thousand

45 W Cool/Warm White Color LED office Lighting Luminaire Seventy One Only

having size (2'X2')/(4'X1') with suitable separate metal frame with

white powder coating for installing fitting in gypsum false ceiling

with external separate driver having BIS certification for installation

in Gypsum ceiling with single piece pressure die cast aluminium

alloy housing with corrosion resistant powder coated finish with

PMMA/PS/Injection moulded Polycarbonate diffuser with high

brightness LED complete (only from Philips Lumileds, CREE,

Nichia, Bridgelux, Seoul & Osram) CRI>80 with 45W.The LED's

should be mounted on metal core PCB for better heat conduction

and long life of LED. The Fixture should comply all International

Standarad third party (LM 79 for complete fixture, LM80 for

individual LED). The Fixture have protection like miswiring, over

voltage, over load, wrong wiring, THD < 15%,, P.F > 0.95, efficiency

≥ 90 lm/w & driver efficiency > 85%. For 45 W fixture wide voltage

range from 160 V to 270 V, 50/60 HZ @ 240V application, 2 KV

surge protection.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

Fixture must have Min. 4050 Lumens light output. The fixture

should be provided with external separate Potted driver, latest Valid

BIS approved Luminaire and driver. The Fixture efficiency ≥

lumens/watt only for safety and performance. (L70 @ 30,000 Hrs.)

The fixture should be able to easily mount on POP / Grid false

ceiling. The Luminiare should be tested as per IP 20 and following

test reports should be submitted at the time of approval: heat

resistant test, thermal test, Ingress protection test, drop test,

Photobiological report with 3 core X 1.0 Sq.mm. flexible wire as per

site requirment [Note:-The manufacturer / authorized Channel

partner of the manufacturer has to submit 5 yrs. free replcement

Guarantee for complete Fixture]

61 Supplying and erecting 8 W LED lamps with following wattage 7.00 Each 111.00 Rupees One Hundred

capacity of 220 to 240 voltage, minimum 15000 burning hours life, Eleven Only

500 V in built-surge protection,Polycarbonate diffuser, mounting

suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED Lamps

integral type, with PC diffuser suitable LAMP holder

62 Providing and erecting Polycarbonate body surface mounting LED 2.00 Each 780.00 Rupees Seven Hundred

Bulk head type 9 watt Lighting Fitting with electronic driver having Eighty Only

THD < 15%, CRI>80, P.F.0.95 And lumen output from luminaire

720 lm, input voltage range 90-300 V AC, 50 Hz cool white (3000 to

6500 k), inbuilt driver having efficiency >=80lm/w, -20 deg C to +

deg C working temperature, AL frame with Beam Angle 120 deg.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

63 Providing, erecting, testing Ceiling Fan confirming to IS: 374/1979 4.00 Each 1929.00 Rupees One Thousand

AMDT No. 1 to 6 Class-I, 50 Hz. Specification of Ceiling Fan must Nine Hundred Twenty

be as per below. (1) Sweep: 1200 mm, (2) Operating Voltage: 180 Nine Only

to 230 V, (3) Power Factor: > 0.9, (4) Power Consumption:

maximum 53W, (5) RPM: minimum 330, (6) Service value:min

m3/min. (7) Class of insulation: 'B', (8) No. of heavy duty premium

quality Ball bearing: Two, (9) Total Body: Top & Bottom should be

alluminium, (10) Blade: Aluminium approx 1.1 mm thick, (11)

Colour: White high grade powder coating, (12) Canopy: Two Nos.

Heavy duty, (13) Condenser: min 1.5 MFD (15% Tolerance )as per

is 1709-1984, Aluminium body premium quality, Branded

make,(14) Down road: up to 1.0 mtr as per site requirment, (15)

Required fixing accessories, (16) 3 core 0.75 sq.mm ISI wire as per

site requirment, (17) No vibration and noise due to mechanical

parts. (Agency has to erect safey wire with ceiling fan and checked

with EIC) (OEM has to approved model as per tender specification

and tested at ERDA) (Necessary test reports should be submitted

strictly at the time of approval. Sample approved by EIC subject to

above specification only)

64 Supplying & Erecting Fan Hook Of 10 mm M.S Round bar 4.00 Each 125.00 Rupees One Hundred

bounded to the RCC bars up to 50 mm Length each side & Twenty Five Only

piereced through 18 Gauge G.I Box having 125 mm dia depth of

mm complete erected concealed in ceiling with necessary round

65 Providing & erecting Fan clamp of 30x5 mm flat of required length 4.00 Each 98.00 Rupees Ninety Eight

& 10 mm M.S. Bolt & Nuts erected with necessary hook of 10 mm Only

M.S. Round Bar.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

66 Supplying & erecting 19/20 mm. nominal bore "B" class G.I. pipe / 15.00 Rn. 107.00 Rupees One Hundred

M.S. pipe down rod erected duly painted for fan complete with Mtr. Seven Only

necessary 24/0.2 flat 3 core flexible Core with earthing. [The down

rod thikness, hole, locking arrangement, construction, poweder

coating, colour shed should be same as original down rod brought

with ceiling fan. For that agency has to give original down rod

sample to fabricator and one sample down rod should be approved

with EIC. After approval given by EIC, agency can use the down

rod as per approved sample. If without approval down rod will be

erected on site, agency has to replace them with own cost.]

67 Supplying & erecting approved make low noise Decorative 1.00 Each 1687.00 Rupees One Thousand

exhaust fan having size 150/200 mm with 1350 RPM with round / Six Hundred Eighty

square frame ABS/metalic body with Grill / inbuilt lowers.(Make & Seven Only

model approved by EIC)

68 Supplying and erecting approved make oscillating type bracket 1.00 Each 2509.00 Rupees Two Thousand

fan A.C. 230 V. 50 cy/s 400/450 mm sweep wall mounted with Five Hundred Nine Only

height adjustment and rotary tilting device complete with guard,

flexible Core plug top complete erected with lead wires as directed.

(Make & model approved by EIC) Cat II

69 Providing & erecting 14 SWG galvanized mild steel chain with end 30.00 Mtr. 26.00 Rupees Twenty Six Only

rings for hanging tube fitting as directed.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

70 Providing & erecting weather proof, dust & vermin proof, floor 0.50 Sq. 10365.00 Rupees Ten Thousand

mounted front operated indoor type cubical panel board having IP- Mtr. Three Hundred Sixty

42 & above protection as per approval from engineer incharge and Five Only

made from 2 mm. thick CRC M.S. sheet for outer body & doors,

mm. thick CRC M.S. sheet for internal partitions with necessary

supporting angles, flats including skirting, bending, drilling, welding,

riveting with internal partitions & cable alley as per requirements &

instruction of engineer-In-Charge with erection of supplied

switchgears, busbars with suitable size of interconnecting PVC

copper wire / Copper-Aluminium strips, rubber gromets, rib, control

wires, backelite control fuses, measuring instruments, earth bus &

earth bolts, foundation flange-bolts-base plates, sufficient nos. of

hinged doors, handle with locking arrangement, rubber gasket

complete with Required Nos. heavy Duty Connector with Cadmium

plated nut and bolt for Anti rusting

The panel shall be supplied with Seven Tank chemical process

which shall be carried out before applying painting, painted with

powder coating. (The rates excludes the cost of switchgears,

busbars, interconnecting mains & Copper / Aluminium strip, fuse,

meters etc. The dimension shall be measured excluding base

beams) (A) locally fabricated panel board (i) With 350 mm

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

Panel manufacturer have to give 5 years maintenance and service

support if in case of breakdown or fault. Panel manufacturer have

to submit electrical meter calibration report. Agency should design

the panel in such a way that there should not be any excess in

panel area (sq.mtr) & length of bus-bar (mtr), if any excess occurs

draw attention to GSPHCL at the time of approval of G.A. drawing.

Loading and unloading of above item shall be done by hydra and

skill work force under supervision of electrical engineer and

guidelines given by manufacturer to avoid damage to the item.

Picture of it to be submitted in running bill / final bill.

Size of door and Ele. room / Pump room shall be checked by

agency's engineer before giving order. If found any problem in size

discuss with GSPHCL engineer for rectification before giving order.

[Including Necessary numbering / marking on PANEL done with red

colour radium sticker as per site requirement and instructions given

by EIC on site. Font / number size given by EIC on site as per

71 Supplying & erecting approved make Four Pole 415 V change 1.00 Each 4738.00 Rupees Four Thousand

over switch interior for panel mounting with operating mechanism Seven Hundred Thirty

A.C.23 duty confirming to IS For 63 Amp. Eight Only

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

72 Providing ad erecting approved make single phase Double Door 1.00 Each 4906.00 Rupees Four Thousand

metal clad D.B. as per relevant indian standards ammended upto Nine Hundred Six Only

date. Supplying and fixing following way single phase MCB

distrubution board of company fabricated IK 09 certificate with

sheet box with powder coated inside and outside after apply seven

tank chemical process of MS sheet cover complete with suitable

integral single piece construction tinned copper busbar and link with

all necessary interconnection and with necessary size MS frame for

mounting MCBDB. Manufacturer must be provided (1) IP 43 and as

per IS:8623-1 & 3, IEC 61439-1 & 3 having D type PU gasket. (2)

Seventank Powder coating Certificate (3) Tinned Copper/Brass

make neutral & Earthing link with isolation & Protecting Cover. For

240 Volts on surface / recess complete with loose wire box,

terminal connectors for all incoming and outgoing circuits, with

suitable size FRLS PVC insulated copper conductor up to terminal

blocks and internal connection, tinned coppper bus bar, 1 no.

tinned copper neutral link, tinned copper earth bar, din bar,

detachable gland plate, interconnections, powder painted including

earthing etc. Single phase incoming and horizontal single phase

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

For 12 Way MCBDB: Including MCB DP 40 Amp. 30 mA double

pole ELCB (ELCB confirming to IS:12640/1988 having

sensitivity of 30 mA and breaking capacity of 10 KA), MCB

Amp. double pole switch (C curve) and S.P. MCB of rating 6 to

32 Amp. with NL suitable to operate on 230 Volt A.C. power. (6

Amp:- 3 Nos., 16 Amp:- 3 Nos. & 25 Amp: 2 Nos.) (The DBs

should be used of same company of MCB / ELCB to be used)

(MCBDB must be erected in line & level with spirit level and finish

the external edge with box cutting plaster) (Same colour

MCB(SP/DP) should be used as same as MCBDB) [Including

Necessary numbering / marking on box done with red colour

radium sticker as per site requirement and instructions given by EIC

on site. Font / number size given by EIC on site as per requirement]

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

73 Providing and erecting Approved make Double Door metal clad 1.00 Each 2316.00 Rupees Two Thousand

D.B. company fabricated 16 G.M.S. sheet box with powder coated Three Hundred Sixteen

MCB distribution board - inside and outside after apply seven Only

tank chemical process of M.S. sheet cover complete with suitable

integral single piece construction tinned copper busbar- and link

with all necessary interconnection, confirming to IS 13032 and BS

5486-1986 without MCB to house appropriate nos. of MCBs.

Manufacturer must be Provided (1) IP 43 Protection Certificate (2)

IK 08 Certificate (3) Seventank Powder Certificate (4) Copper/Brass

make neutral & Earthing link with isolation. (The DBs should be

used of same company of MCB to be used) Three phase 4 way

SS Double door for horizontal single phase outgoing [Including

Necessary numbering / marking on box done with red colour

radium sticker as per site requirement and instructions given by EIC

on site. Font / number size given by EIC on site as per requirement]

74 Providing & erecting 415 V MCB Four Pole for Motor & Inductive 4.00 Each 730.00 Rupees Seven Hundred

Load (C Curve) having 10KA breaking capacity & confirms to Thirty Only

IS:8828 in existing MS box having following capacity. For 63 Amp.

75 Providing & erecting 240 V MCB Double pole switch for Motor and 8.00 Each 327.00 Rupees Three Hundred

inductive load (C curve) having 10 KA breaking capacity & confirms Twenty Seven Only

to IS:8828 in Existing M.S. box having following capacity. For

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

76 Providing and Erecting of Miniature circuit breaker single pole 6 10.00 Each 111.00 Rupees One Hundred

Amp. to 25 Amp. suitable to operate on 240 V A.C. system and Eleven Only

having breaking capacity 10 KA to be erected in existing MS box

confirming to IS 8828/1996 with ISI Mark.

77A Supplying & fixing box for housing RCCB + MCB combination 2.00 Each 272.00 Rupees Two Hundred

made of 18 SWG sheet steel duly powder coated with gasket, Seventy Two Only

dust & vermin proof bakelite shield two earthing terminals for

following type of RCCB, RCCB + MCB [a] For 2 pole [Same

company metal box used as MCB / ELCB used with earthing

terminal with necessary Numbering / marking with oil Paint by

77B [b] For 4 pole [Same company metal box used as MCB / ELCB 3.00 Each 442.00 Rupees Four Hundred

used with earthing terminal with necessary Numbering / Forty Two Only

marking with oil Paint by painter]

78 Supplying and Erecting KITKAT pattern porcelain cutout with 6.00 Each 416.00 Rupees Four Hundred

base of following current capacity erected on existing block board. Sixteen Only

79A Supplying and laying UPVC cable trunking system comprising 40.00 Mtr. 275.00 Rupees Two Hundred

unplasticised polyvinyl, chloride rigid material with ignition free & Seventy Five Only

flame proof confirming BS .All necessary accessories and

measuring of following sizes. [1] 75 mm x 50 mm trunking.[MK,

LEGRAND, OBO make Only]

79B 100 mm x 50 mm trunking .[MK, LEGRAND, OBO make Only] 20.00 Mtr. 424.00 Rupees Four Hundred

Twenty Four Only

80 Providing and erecting metalic danger notice board for MEDIUM 2.00 Each 69.00 Rupees Sixty Nine Only

VOLTAGE installation to be erected as per I.S.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

81 Providing, erecting, fabricating the M.S. structure as per 200.00 Kg. 75.00 Rupees Seventy Five

requirement of site as per structure design Including proper size Only

approved by EIC of M.S. angles, flats, bars, square pipe, channels,

sections (Tata, Jindal, Asian, JSI Make) complete with cutting,

welding, grinding and finishing duly painted with Asian/Nerolac

make premium quality oil paint and true care red oxide metal

primer,asian paint make with erection on site as per direction of

engineer in charge with necessary grouting cementing, plastering

and finishing complete. All hole opening of square pipe end must

be closed with M.S plate welding. Payment will be done on KG as

per Actual weight.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

82 SITC of Outdoor aesthetically designed LED Flood Light 6.00 Each 6228.00 Rupees Six Thousand

Luminaire with total consumption of maximum 90 W with single Two Hundred Twenty

piece die cast aluminium housing, LED's mounted on high quality Eight Only

metal core based PCB with extremely precison designed heat sink,

complete with IP66 protection Class, with polycarbonate /

Toughened glass cover. The fixture should be suitable for

pole/bracket mounting. The fixture to comply both LM79 and LM

guidelines with LED minimum 130 lumen/watt with L70 at

hrs, provided with high quality polycarbonate Seperate lenses for

better light distribution. The Fixture Should be able to be Pole

Mounted and also bracket mounted, provided with high quality

potted driver for protection against, high and low Voltage cut Off,

opertional for high amibient and high humid envirnoments, THD of

driver should be less than 10% and P.F > 0.95. Also the Fixture

should meet the following technical criterias. Operating range

Voltage 160 to 270V, system efficiency > 110 lm/w, CCT > 5000K,

CRI >65, beam angle 120 deg, 4kV integral & non integral surge

immunity level at least 10 KV non integral... Flood Light lumens

shall be more than 9900 (Note:- The manufacturer / authorized

Channel partner of the manufacturer has to submit 5yrs free

replcement Guarantee for complete Fixture)

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

83 Supplying & erecting approved make SMC press moulded 8.00 Each 472.00 Rupees Four Hundred

composite FRP. loop-in, loop-out approx. 2mm thick box complete Seventy Two Only

with Bakelite connector strip 5way(3P+N+E),DIN rail for mounting

mob & hinged doors as per requirement having locking

arrangements with mounting clamp with nuts, bolts & washers

suitable for erection on pole with cable clamps& earth bolt of

following size of box.(C)150mm x 125mm x 100mm [deep]

84 Providing & laying HDPE Double walled corrugated pipes (DWC) 250.00 Mtr 117.00 Rupees One Hundred

(conforming to IS: 16205 (part 24) 2018)) with minimum load Seventeen Only

required of 450N capacity with anti rodent and ultra violet material

properties with necessary connecting accessories of same

material at required depth to be laid 90 cms. under ground for

laying of cable below ground / road surface for enclosing cable and

back filling the same to make ground as per original. (A) For Outer

dia. 50 mm and Inner dia. 38 mm. (Test Certificate to be

85 Providing & laying HDPE Double walled corrugated pipes (DWC) of 80.00 Mtr 150.00 Rupees One Hundred

polyethylene (conforming to IS: 16205 (part 24) 2018) with Fifty Only

minimum load required of 450N capacity with anti rodent and ultra

violet material properties with necessary connecting accessories

of same material at required depth to be laid 90 cms. under ground

for laying of cable below ground / road surface for enclosing cable

and back filling the same to make ground as per original.For Outer

dia. 90 mm and Inner dia. 75 mm. (Test Certificate to be

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

86 Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured 300.00 Mtr. 361.00 Rupees Three Hundred

Copper cable for 1100 volt to be laid 90 cms. Under ground or to be Sixty One Only

laid on wall with suitable G.I. heavy guage 1.0 mm thick cable

clamp or in existing DWC pipe underground or road crossing or

floor of following size of cables. [a-1] For 4 core x 4 sq.mm.

87 Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured cable 100.00 Mtr. 152.00 Rupees One Hundred

multistrand Aluminium conductor for 1.1 KV. to be laid 90 Fifty Two Only

cms.Under ground or to be laid on wall with suitable G.I. heavy

guage 1.0 mm thick cable clamp or in existing DWC pipe

underground or road crossing or floor of following size of cables. [d]

4 core x 16 Sq. mm

88 Supplying & Erecting following size of Light duty “A” Class G.I. 20.00 Mtr. 171.00 Rupees One Hundred

Pipe & erecting as directed by Engineer-in-charge. For 25 mm Seventy One Only

89 Providing & Erecting Flexible PVC insulated multistrand 60.00 Mtr. 77.00 Rupees Seventy Seven

multicore 1.1 kv grade ISI marked copper wires of following size Only

to be erected as directed. 3 core 2.5 sq.mm. PVC insulated

round copper wire ISI mark.

90 Providing and Laying of Mains with ISI marked, 1.1 KV grade 200.00 Mtr. 141.00 Rupees One Hundred

electrolyte multi stranded, annealed copper conductor with heat Forty One Only

resistant PVC insulated conforms to IS:694, IEC - 227 erected in

existing pipe of following size (Specifically for control panel, relays,

power switchgears, motor starters & control wiring) with required

size of copper lugs, nuts and bolts if required. [g] One wire

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

91A Providing & fixing double compressed heavy duty flange type 30.00 Each 43.00 Rupees Forty Three

brass cable gland with rubber ring for P V C insulated armoured Only

cable complete with outgoing tails, insulating tape etc. For following

size cables. For 2 to 4 core x 4.0 Sq. mm. (Sigma, MCI, Commet

91B For 4 core*16 Sq. mm (Sigma, MCI, Comet Make Only) 10.00 Each 57.00 Rupees Fifty Seven Only

92 Solderless crimping type Copper lugs conforming to IS suitable for 200.00 Each 8.00 Rupees Eight Only

cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut

bolts in an approved manner. (a)1.5/2.5 to 6 Sq.mm

93 Solderiess crimping type Aluminium Lugs conforming to IS suitable 40.00 Each 15.00 Rupees Fifteen Only

for cable of following size evenly crimping with high pressure tool &

connected to switchgear terminals with brass/ cadmium plate nut

bolts in an approved manner. For 16-25 Sq.mm.

94 Providing & Erecting Universal Astro 5 KVA intelligent streetlight 2.00 Each 12895.00 Rupees Twelve

control system insu with weather proof box for outdoor Thousand Eight

application. (As per specification attached separately) (Make and Hundred Ninety Five

model approved by EIC) Only

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

95 Supplying and fixing radium sticker or Painting the number and 100.00 Each 2.00 Rupees Two Only

words for inventory Identification on erected fittings / equipment’s

or Such accessories (MCBDB, Panel, Pole, Rack, Earthing, Pump,

Door etc.) as may required with good quality of enamelled paint or

fade proof, weather proof, waterproof high quality vinyl radium

sticker for indoor / outdoor application as directed by engineer in

charge. For one character 50 mm height.

(The colour of sticker / paint should be as per instruction given by

EIC as per site requirement)

96 Providing and erecting Inverter based approved make split air- 2.00 Each 51155.00 Rupees Fifty One

conditioning unit consisting of condensing unit with variable Thousand One Hundred

speed fan motor, inverter type hermetically sealed rotary Fifty Five Only

compressor with accessories etc. duly connected separately

erected evaporating unit and blower motor with its accessories by

means of extra supplied proper insulated copper tubing,drain PVC

pipes suitable for ( cost includes Eco Friendly green gas charging

and 15A plug top & Remote Control & MS Stand) with necessary

core cutting.(1)For ISEER Range (KWH/KWH)(3.1 to 3.99) (C) for

1.7 to 2 ton capacity.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

97 Executing All inclusive maintenance (service + Spare parts) 2.00 Each 9334.00 Rupees Nine Thousand

contract for defect liability period as per tender Items & conditions. Three Hundred Thirty

HVAC agency has to provide Four (04)(Dry Services and wet Four Only

Services with water or Chemical as per site requirement ) services

per year during Defect liability period. One copy of necessary

service reports duly signed by concern police officer and No Defect

certificate from police department at the time of releasing Security

Deposit will be submitted to DEE(Ele.), GSPHCL. Agency has to

compulsary submit FDR of approved bank as per clause

section 3 Rs.18668.00 +GST or quoted rate (asper tender

premium % above) whichever is higher to G.S.P.H.C.L. for

minimum maturity period of Five years in favour of

G.S.P.H.C.L.,which will be released after successful completion of

AMC and at the completion of defect liability period. In any case

without submitting FDR final bill submission will not be

done.Without above service reports security deposit of whole

project will not be released. (Agency has to submit stability and

performance certificate regarding AC system from authorized

dealer/OEM of AC) for 1.7 ton to 2 ton capacity Inverter type

split air-conditioning unit.

98 Supplying and erecting insulated pair of soft copper tubing open or 30.00 Rmt. 956.00 Rupees Nine Hundred

concealed including power and control cable,necessary PVC drain Fifty Six Only

pipes for Split AC machine up to 4 TR capacity

99 SITC of Rigid UPVC drain pipe of 10 Kg/cm2.rating with 9 mm 30.00 Rmt. 67.00 Rupees Sixty Seven

thick.nitrile rubber insulation.(E) 19 mm dia. Only

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

100 carry out RCC Core cutting- up to 100 mm dia./200mm thick 4.00 Job 1188.00 Rupees One Thousand

Wall/beam/slab with providing PVC pipe of 3 mm thick inside and One Hundred Eighty

necessary finishing on both ends of wall . Eight Only

Total Amounts Rs.

I/C. Exe.Engineer

…………………………… G.S.P.H.C.Ltd

Contractors Signature Junagadh