Balance Work of Som Kunj Circuit House Building at Palampur Distt. Kangra (HP) (SW- Water Supply and Sanitary Installation, Aluminium work etc)

Amount

Providing and fixing Polyethelene-Aluminium Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbonblack having thermal stability for hot & cold water supply,capable to withstand temperature up to 80°C, includingall special fittings of composite material (engineeringplastic blend and brass inserts wherever required) e.g.elbows, tees, reducers, couplers & connectors etc., withclamps at 1.00 metre spacing. This includes the costs ofcutting chases and including testing of joints complete , as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

2025 (25 mm OD) pipe

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid, as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan., as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

Providing and fixing toilet paper holder :C.P. Brass, as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

Providing and fixing 600x450 mm beveled edge mirior supperior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete, as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap , as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge, as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

Providing and fixing two hole basin mixing fauct F2 006405HTF 3001405 wall mixer with spout (Non shower arrangement) , as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

Providing and fixing wall mixing fauet for shower and bath hand showers with angle shower arrangement and rest holder QT F 2006404 NFT 3001464 wall mixer with telescopic shower , as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

Providing and fixing CP brass waste for wash basin or sink 32 mm Dia , as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals . .

Providing and fixing rubber plug for wash basin or sink 32 mm Dia , as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

Providing and fixing uplasticised PVC connection pipe with brass unions 450 mm length 15mm , as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

Providing and fixing 100mm dia CP iron grating of ESS-KSS for nalhni trap , as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

Providing and fixing CP brass angle valve 15 mm with out nuts and pipe a) stop cock consisting of exposed partvQTF206351 , as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

Providing and fixing CP brass angle valve 15 mm with out nuts and pipe flush cock consisting of exposed QTF 4060101 , as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

Providing and fixing 15mm diameters C.P. brass bib tap Long Nose of Jaguwar or contra with capstan head, as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

Providing and fixing mixer for kitchen sink with casted swing spout at top QTF 2006501 HTF 3001501 Sink mixer long swived spout connectiing wall and flanger, as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

Providing and fixing chromium plated brass soap dish of Jaguwar or contra with C.P. brass brackets fixed to wooden cleats with C.P. brass screws , as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms , as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

Providing and fixing chromium plated brass towel ring complete with CP brass brackets F5002105 , as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank, as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete, as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required 610x460 mm bowl depth 200 mm, as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

Providing and fixing high pressure PVC spigot and socket soil, waste and ventilating pipes ISI Marked i/c fixing with approved adhesive etc. Cpmplete, as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

75 mm (Seventy five milimetre) Dia

150 mm (One hundred fifty milimetre) Dia

Providing and fixing PVC floor trap of self cleaning design including fixing with approved adhesive cost of cutting and making good the wall and floor etc. Complete, as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

Providing and fixing PVC Single Equal Branch with oval asses ISI Marked insertion rubber washer 3 mm thicK bolt and nuts complete i/c fixing with approved adhesive etc. Cpmplete, as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

75 mm (Seventy five milimetre) Dia

110 mm (One hundred ten milaimetre) Dia

Providing and fixing PVC offset 45° ISI Marked i/c fixing with approved adhesive etc. Complete, as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

75 mm (Seventy five milimetre) Dia

110 mm (One hundred ten milaimetre) Dia

Providing and fixing PVC Y Junction with oval acess door intersection rubber washer 3 mm thick bolta and nuts ISI Marked i/c fixing with approved adhesive etc. Complete , as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

75 mm (Seventy five milimetre) Dia

110 mm (One hundred ten milaimetre) Dia

Providing and fixing PVC Y plain junction with oval acess door intersection rubber washer 3 mm thick bolta and nuts ISI Marked i/c fixing with approved adhesive etc. Complete, as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

75 mm (Seventy five milimetre) Dia

110 mm (One hundred ten milaimetre) Dia

Constructing masonry Chamber 90x90x100 cm inside, inbrick work in cement mortar 1:4 (1 cement : 4 coarsesand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep(inside) with chained lid and RCC top slab 1:2:4 mix (1cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ), i/c necessary excavation, foundationconcrete 1:5:10 (1 cement : 5 fine sand : 10 gradedstone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarsesand) 12 mm thick, finished with a floating coat of neatcement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5, as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

Providing and fixing lequid soap dispenser QT No F5007111 , as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

Providing and fixing CP brass tumbler holder QT No F 5002107, as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

Providing and fixing power coating aluminum work minimum thickness of power coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately), as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

Providing and fixing bright brass sliding door bolts, with nuts and screws etc complete as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

300x16 mm , (Three hundred into sixteen milimetre)

250x16 mm (Two hundred fifty into sixteen milimetre)

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. Complete , as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

:200x10 mm (Two hundred into ten milimetre)

150x10 mm (One hundred fifty into ten milimetre)

Providing and fixing bright finished brass handles with screws etc. complete: , as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

150mm (One hundred fifty milimetre)

100 mm (One hundred milimetre)

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete, as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

Providing and fixing aluminium die cast body tubulartype universal hydraulic door closer (having brand logowith ISI, IS : 3564, embossed on the body, door weightupto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete , as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

Providing and fixing insulation board lining with butt joiniting and nails ( frame work and cover filets to be measured and paid for sepertely 18 mm thick, as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as perASTM518:1991, in true horizontal level suspended oninterlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Providing & fixing in position Phenol bondedm reveal profile (white/black),comprising of main T runners of size 15x42mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate crossT of size 15x42 mm of length 600mmto form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge , as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m, as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

Providing and laying cement concrete 1:4:8 (One cement : four sand : eight graded/crushed stone aggregate 40mm nominal size) and curing complete excluding form work in foudation and plinth, as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete , as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

C M RANA