CONSTRUCTION OF PINK TOILET AT DIFFERENT LOCATIONS AND OPERATION & MAINTENANCE FOR 5 YEAR IN DIFFERENT WARDS OF SOUTH ZONE,AHMEDABAD.

Name of Work:- CONSTRUCTION OF PINK TOILET AT DIFFERENT LOCATIONS AND OPERATION &

MAINTENANCE FOR 5 YEAR IN DIFFERENT WARDS OF SOUTH ZONE,AHMEDABAD.

Name of Work:- દ ણ ઝોનના ુ દા ુ દા વોડમાં ુ દ ુ દ જ યાએ અલગ-અલગ જ યાએ િપક ટોયલેટ (મ હલાઓ માટ ખાસ

શૌચાલય) ંુ બાંધકામ અને ૫ વષ માટ સંચાલન અને િનભાવણી (Operation & Maintenance) ના કામ બાબત

Demolition & Dismantling work

Demolition of RCC work using Hydra Breacker including

stacking of servicable materials and disposal of

1 10.00 unservicable materials with all lead and lift.Removal Of

Existing Building Foundation and Super Structure If Any.

(Item Code 20002, 20.3 R&B SOR 2023-24 Pg No 140) 1047.38 Cu.M.

Demolition of Brick work and stone masonry including

stacking of serviceable materials and disposal of

unserviceable materials with all lead and lift.(ii) In Cement

Mortar.Removal Of Existing Building Foundation and Super

Structure If Any.(Item Code 20003B R&B SOR 2023-24 Pg

Dismentaling of sheet roofing including ridges, Hips,

Valleys, Gutters etc. stacking of serviceable materials and

disposal of unserviceable materials with all lead and

lift.(Item Code 20007A-B R&B SOR 2023-24 Pg No 140)

i 3.00 (i) G.I.sheet roofing. 47.25 Sq.mt

ii 3.00 (ii) A.C. sheet roofing. 53.55 sq.mt

Dismentling steel work including distempering and stacking

4 1000.00 the materials with all lead and lift.(Item Code 20003B R&B

Dismentling doors, windows, ventilators etc. (wood or steel)

shutters including chowkhats architraves, hold fasts and

other attachment etc. complete and stacking them with in

all lead and lift. (i)Notexceeding 3 Sq.M. in area. 165.9 Each

Removing & Scrapping of Old deteriorated Plaster of any

thickness from Masonary / R.C.C. member including

6 150.00 stacking of serviceable material & disposal of un

serviceable from site of work with all lead & lift.(Item Code

7 Excavation for foundation including sorting out stacking of

useful material & disposing of excavated stuff upto 50 mt.

lead. Loose & Soft soil.Executed With Manual Labour (Item

Code 04B001A/04B002A R&B SOR 2023-24 Pg No 50)

a 350.00 up to 1.5 mt. depth 201.81 Cu.M.

b 100.00 1.5 to 3.0 mt. depth. 222.72 Cu.M.

c Add extra for Disposing off the excavated stuff of above

150.00 items for lead of (A) 50 m to 100 m(Item Code 04005A

R&B SOR 2023-24 Pg No 48) 17.28 Cu.M.

d Add extra for Disposing off the excavated stuff of above

150.00 items for lead of (B) 100 m to 200 m (Item Code 04005B

R&B SOR 2023-24 Pg No 48) 34.56 Cu.M.

8 Provdg. & laying cement concrete 1:3:6 (1 cement :

coarse sand : 6 hand broken stone aggregates 40 mm

nominal size) and curing complete excluding cost of form

work in (Item Code 20003B R&B SOR 2023-24 Pg No 52)

a 3 (A) Foundation and plinth (Item Code 05003A R&B SOR

9 Supplying of graded hand brocken stone size of 90 mm to

15.00 127 mm at site (Rubble or Spoul) AMC Approved Rate

10 Labour charges for spreading the spouls 90 mm to 127 mm

thick layer good earth filling in voids correcting the grade &

60.00 camber comp. with rolling, watering, incl. preparing

thesurface by brushing for removing all loose or dirts

ect.comp. (Approved Rate) 18 Sq.mt.

11 Provdg. & laying cement concrete 1:4:8 (1 cement :

coarse sand : 8 hand broken stone aggregates 40 mm

75.00 nominal size) and curing complete excluding cost of form

work in foundation& plinth.(Item Code 05004A R&B SOR

12 Filling available excavated earth (excluding rock) in

trenches, plinth, sides of foundations etc. in layers not

300.00 exceeding 20 cm. in depth consolidation each deposited

layer by ramming and watering.(Item Code 4006 R&B SOR

13 a Conveyance charges of earth lime, murrum, building

rubbish, manure, garbage, sludge, excavated rock, fly ash,

aggregate of any kind etc. comp. upto 5 km lead.(Item

Code 030201A1 R&B SOR 2023-24 Pg No 06) 326.73 Cmt

b 360.00 Extra For Lead Above 5 km & upto 6 km 7.41 Cmt

c 360.00 Extra For Lead Above 6 km & upto 7 km 7.41 Cmt

d 360.00 Extra For Lead Above 7 km & upto 8 km 7.41 Cmt

e 360.00 Extra For Lead Above 8 km & upto 9 km 7.41 Cmt

f 360.00 Extra For Lead Above 9 km 7.41 Cmt

14 Filling in plinth with sand under floors including watering,

ramming, consolidating, compacting and dressing etc.

completed.(Item Code 04007A R&B SOR 2023-24 Pg No

15 Filling in foundation and plinth with murrum or selected soil

in layers of 20 cm. thickness including watering, ramming

and consolidating etc. Complete. (Item Code 04008A R&B

SOR 2023-24 Pg No 48) 286.2 Cmt

16 Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation

0.00 and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine

sand)(B) Conventional(Item Code 06002BA R&B SOR

a (a) in foundation & Plinth(Item Code 20003B R&B SOR

b Extra for brick work in superstructure above plinth level

102.00 upto floor two level (B) Conventional (Item Code 06006B

R&B SOR 2023-24 Pg No 71) 272.25 Cu.M.

17 (i) Half brick masonry in common brunt clay building bricks

having crushing strength not less than 35 Kg/Sq.Cm. in

0.00 Cement mortar 1:4 (1Cement : 4 -coarse sand ) in

foundation and plinth (B) Conventional.(Item Code

06008A2A R&B SOR 2023-24 Pg No 72)

a in foundation and plinth(Item Code 06008A2A R&B SOR

b Extra for half brick masonry in superstructure above plinth

105.00 level upto floor two level. (B) Conventional (Item Code

06008E2A R&B SOR 2023-24 Pg No 73) 40.09 Sq.M.

18a Providing and laying controlled cement concrete M.250 and

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (A)

Foundations, footings, Base of columns and Mass

concrete.(Item Code 05025AA R&B SOR 2023-24 Pg No

18b Providing and laying controlled cement concrete M.250 and

curing complete excluding the cost of formwork and

21.00 reinforcement for reinforced concrete work in (B) Walls,

from top of foundation level upto floor two level (Item Code

18c Providing and laying controlled cement concrete M.250 and

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (.C)

Slabs,landing,shelves,Balconies, Lintels, Beams, Girders

and Cantilever upto floor two level. (Item Code 05025CA

R&B SOR 2023-24 Pg No 57) 4496.07 Cu.M.

18d Providing and laying controlled cement concrete M.250 and

curing complete excluding the cost of formwork and

3.00 reinforcement for reinforced concrete work in (D) Columns,

Pillars posts and struts, upto floor two Level(Item Code

19a Providing and laying controlled cement concrete M.200 and

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (A)

Foundations, footings, Base of columns and Mass

concrete (Item Code 05024AA R&B SOR 2023-24 Pg No

19b Providing and laying controlled cement concrete M.200 and

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (.C)

Slabs,landing,shelves,Balconies Lintels, Beams, Girders

and Cantilever upto floor two level. (Item Code 05024CA

R&B SOR 2023-24 Pg No 57) 4460.36 Cu.M.

19c 3.00 Providing and laying controlled cement concrete M.200 and

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (D) Columns,

Pillars posts and struts upto floor two level. (Item Code

05024DA R&B SOR 2023-24 Pg No 57) 4558.2 Cu.M.

19d Providing and laying controlled cement concrete M.200 and

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (E)

Staircases excluding landing upto floor two leve (Item Code

20a 3.00 Providing and laying cement concrete work 1:2:4 (1-

Cement : 2- Coarse sand : 4- graded stone aggregates

mm nominal size) and curing complete excluding cost of

formwork and reinforcement for reinforced concrete work in

(A) Foundations, footings, Base or columns and Mass

concrete (Item Code 05011AA R&B SOR 2023-24 Pg No

20b 3 Providing and laying cement concrete work 1:2:4 (1-

Cement : 2- Coarse sand : 4- graded stone aggregates

mm nominal size) and curing complete excluding cost of

formwork and reinforcement for reinforced concrete work in

(B) Slabs, landing, shelves, Balconis , Lintels, Beams,

Girders and Cantilever upto floor two level. (Item Code

Providing and laying C.C. pavement of mix M-25 with ready

mixed concrete from batching plant. The ready mixed

concrete shall be laid and finished with screed board

20c 6.00 vibrator , vacuum dewatering process and finally finished

by floating, brooming with wire brush and including panel

shuttering etc. complete as per specifications and

directions of Engineer-incharge.(AMC Approved Rate) 8277.55 Sqmt

Providing and laying and fixing 25 mm thick expansion joint

by hydrocell semi rigid UV resistance with high

20d 3.00 performance laminated closed cell polythene foam joint

filler in sheet foam as directed, etc. complete. (Item Code

5049 R&B SOR 2023-24 Pg No 64) 738.13 Sqmt

21 Providing form work in ordinary timber planking so as to

give a rough finish including centering, shuttering, strutting

and propping etc. height of propping and centering below

supporting floor to celling not exceeding 4 M & removal of

the same for in situ reinforced or plain concrete work

in(Item Code 09001 CH. 9 R&B SOR 2023-24 Pg No 78)

a (A) Foundation, footings, bases of columns etc. and mass

concrete. ( Item Code 09001AA PG. NO. 78) 171.68 Smt

b (B) Flatsurfacessuchassoffitsof supspened floors slabs

180.00 Landings and the like. (1) Floors etc. upto 200 mm in

thickness. ( Item Code 09001B1A PG. NO. 78)

c (C)Vertical surface such as walls (any thickness) partitions

and the like including attached buttresses & string course &

the like. ( Item Code 09001CA PG. NO. 78)

(D) Columns, pillars, posts & struts.

d 30.00 (1) Square, rectangular, polygonal in plan ( Item Code 297.68 Smt

e (2) Circular or curved in plan. Item Code09001G2A, PG

f (H) (1) Sides and soffits of beam, haunchings cantilevers,

girders, bressumers, Coping and lintels not exceeding 1 M

in depth. ( Item Code 09001H1A PG. NO. 79)

g (2) Sides and soffits of beam, haunchings cantilevers,

75.00 girders, bressumers and lintels exceeding 1 M in depth.

ITEM CODE 09001H2A, Pg. no. 79) 259.88 Smt

h (L) chullah hoops, weather sheds, chhajas, carbels etc

including edges. ( Item Code 09001LA PG. NO. 80) 155.78 Smt

i (M) Staircase with-sloping or stepped soffits incl. risers &

3.00 strings excluding landing. ( Item Code 09001MA PG. NO.

22 Providing T.M.T Fe 500D bar reinforcement for R.C.C. work

including bending, binding and placing in position complete

up to floor two level.(Item Code 05014C R&B SOR 2023-

a 11000.00 All Floor Level 75.46 Kg.

23 Providing and laying polished Kota stone slab (Polished /

River Finish, Green colour ) flooring over 20 mm. (average)

thick base of cement mortar 1:6 (1 cement : 6 coarse sand)

12.00 or lime mortar 1:1.5 laid over and joined with grey cement

slurry including rubbing and polishing complete.25 mm

th.(Item Code 14012AA R&B SOR 2023-24 Pg No 121) 982.83 Sq.M.

24 Providing and laying polished Kota stone slab 25 mm. thick

in Platform ,Riser of Stair , Skirting, Tread , dado and

pillars laid on 10 mm. thick cement mortar 1:3 (1 cement :

54.00 3 coarse sand) jointed with grey cement slurry including

rubbing and polishing and MAking groove where it is

Required etc. compl (Item Code 14013A R&B SOR 2023-

25 Providing and laying white/Colur glazed tiles 6 mm thick in

flooring treads of steps and landing laid on a bed of 12 mm

3.00 thick cement mortar 1:3 (1 cement : 3 coarse sand)

finished with flush pointing in white cement. (Item

Code14008AA R&B SOR 2023-24 Pg No 120) 908.17 Sq. M.

25 Providing and layingWhite / Colour glazed tiles of size

mmx200mm x 8 mm / 300 mmx 450mm x 8 mm in skirting,

risers of steps, Floor and dedo on 10 mm. thick cement

90.00 plaster 1:3 (1 cement : 3 coarse sand) and jointed with

white cement slurry.etc. complete in all respects etc.

complete as direction by E.I.C.(Item Code 14036 R&B SOR

27 3.00 Providing and laying marble stone slab flooring over

mm. (Average) base of cement mortar 1:6 (1 cement:

coarse sand) or L.M. 1:1.5 laid and jointed with grey

cement slurry including rubbing and polishing complete: (A)

Marble slab 25 mm. thick. (Item Code 14011A R&B SOR

28 P&L24"x24"vitrified8mmthicktileflooringover

20mm(average) baseof cementmortar 1:6 (

cement:6coarsesand)onnewsurfaceorfixingon existing

flooring by adhesive material including dismentalingof

existing flooringand jointedwith color cement slurry

including finisedwith flush pointing&cleaning thesurfaceetc.

complete for light shade (Item Code 14022 R&B SOR

29 ProvidingandlayingVitrifiedtiles 8to10mmthick , 24'' x24''

inskrtingrisersof stepsanddedoon 10mm thick cement

450.00 plaster 1:3 (1-cement : 3coarse sand) and jointed with

white cement slurry (Item Code 14009CA R&B SOR 2023-

30 Grouting the joints of flooring tiles having joints of 3 mm

width, using epoxy grout mix of 0.70 kg of organic coated

filler of desired shade (0.10 kg of hardener and 0.20 kg of

resin per kg), including filling / grouting and finishing

complete as per direction of Engineer-in-charge. Size of

Tile 600x600 mm (Approved Rate) 258.65 Sq. M.

31 Providing and laying Ceramics tiles 6 to 8 mm thick in

flooring, treads of steps, landing and dedo on 12 mm. thick

cement plaster 1:3 (1 cement : 3 coarse sand) and jointed

6.00 with white cement slurry etc. comple(Item Code 20003B

R&B SOR 2023-24 Pg No 140)te in all respects etc.

complete as direction by E.I.C. (Item Code 14008BA R&B

32 Providing & Laying 18 mm thick Mirror polish granite For

flooring , counter , stair -riser , tread , skirting , dedo

Jambs etc. machine cut or chiselled on bed of cement

150.00 mortar 1:1 pointing with neat cement slurry incl. moulding,

Making grooves where it is required etc. comp. as per

instruction of engineer in charge.(Approved Rate)

33 Provdg.15 to 20 mm. thick Finish / Mala cement plaster in

single coat on fair side of brick / concrete walls for interior

375.00 plastering upto floor four level and finished even and

smooth in C.M.1:4.(Approved Rate)

34 Providing and mixing water proofing materials in cement Per Bag

mortar in proportion recommended by the manufacturer. of 50 Kg

etc. comp. as per instruction of engineer in of

charge.(Approved Rate) 45.78 Cement

35 Providing 20 mm th. Double coat Sand face / Mala Cement

Plaster on Walls upto floor four level Above Ground level

consisting of 12 mm th. Backing coat of C.M. 1:3 (

cement : 3 Ssand ) & 8 mm th. Finishing coat of C.M. 1:1 (

1 cement : 1 sand ) ets. Complete. (Item Code 17017 R&B

36 White / Color washing with lime on undecorated wall

surfaces (two coats) to give an even shade including

15.00 thoroughly brooming the surface to remove all dirt, dust

mortar drops and other foreign matter. (Item Code

37 Finishing walls with Acrylic Smooth exterior paint of

required shade :New work (Two or more coat applied @

126.00 1.67 ltr/10 sqm over and including priming coat of exterior

primer applied @ 2.20 kg/10 sqm) (Approved Rate)

38 P./L. METALIC HERITAGE SURFACE TEXTURE

Providing and fixing of HERITAGE textured homogeneous

wall finishing system from BAKELITE HYLAM LTD or

equivalent make consisting of a two component system of

(25 kgs per Pack) made of 92% silica particles coated with

fade resistant pigments, 100% acrylic polymer bonding

agent (5kgs per pack) with the applied thickness of the

coating being between 0.8mm-1.2mm to be applied on

acured, smooth level plaster without keying, as per the

shades/combinations approved, as per the manufacturer

directions, for usages, tobe applied by an approved

applicator of the manufacturer, as per the directions /

supervision of the engineers in charge, all complete.

Approve Rate) 815.90 Sq.M.

39 Wall Painting (two coats) with plastic emulsion / Oil paint of

approved brand and manufacture and of shade required on

undecorated wall surfaces to give an even shade, over and

including a priming coat with alkali resistance primer of

210.00 approved brand and manufacture after thoroughly brushing

the surface free from mortar droppings, and other foreign

matter and also including preparing the surface even and

sand -papered smooth(Item Code 18031 R&B SOR 2023-

40 Extra over above item for every subsequent coat of of wall

225.00 painting with plastic emulsion / Oil paint of approved brand

(Item Code 18032 R&B SOR 2023-24 Pg No 135) 33.39 Sq.mt.

41 Applying two coats of putty & two coats of primer of

approved brand and manufacture on new wall surface to

give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matter

and sand papered smooth.(Item Code 19032 R&B SOR

42 Providing & Laying & Jointing glazed stoneware pipes incl.

excavation up to 2.0 mt.,refilling, trasporting the pipe to

work site, unloading, lowering in trenches, laying and

jointing the pipes in c.m. 1:1 incl. all jointing materials such

as cement, sand, hemp, bitumen as dire. testing the pipe

line to a head of 1.5 mt. and hydraulic test as dire incl.

watering trenches, spreading , and carting away of surplus

earth within 100 mt.lead as dire. etc. comp.(Aproved rate)

a 225.00 23 cm dia. 386 Rmt

b 45.00 15 cm dia 183 Rmt

c 15.00 10 cm dia. 134 Rmt

43 Constructing brick masonry chamber for under ground C.I.

Inspection chamber and bends with bricks having croshing

strength not less than 35 Kg. Cm2 in C.M. 1:5 C.I. cover

with frame (Lightduty) 455mm x 610 mm intenal

dimensions total weight of cover with frame to be not less

than 38 Kg. (Wt. of cover 23Kg.) and Wt. of frame 15Kg.)

(R.C.C.top slab with 1:2:4 mix (1-cement:2-coarse sand:4-

graded stone aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15 mm thick with cement mortar 1:3

finished smooth with a floating coat of neat cement on walls

and bed concrete etc. complete.(i) Inside dimensions

mm x 610 mm and up to 850 mm deep (Item Code

44 Constructing Manhole with R.C.C. top slab in 1:2:4mix (1-

cement: 2-coarse sand:4-graded stone aggregate 20 mm

nominal size) foundation concrete 1:3:6 mix (1-cement:3-

coarse sand:6-Brick bats 40+50mm size) inside plastering

15mm thick with Cement Mortar 1:5 (1-Cement:5-coarse

sand) finished with a floating coat of neat cement and

making channels in cement concrete 1:2:4 mix (1-

Cement:2 -Coarse sand:4-stone aggregate 20 mm nominal

size) finished smooth complete including curing and festing

(i) Inside size 900mm x 1200mm and up to 1.5M. deep

including C.I. cover with frame size 560 mm diameter total

weight of cover and frame to be not less than 128kgs. (Wt.

of cover 64Kg. and Wt. of frame 64Kg.) (A) With 230 mm

thick walls of brick masonry using brick having crushing

strength not less than 35Kg./Sq.cm. in Cement Mortar 1:5

(1-Cement: 5-Coarse sand) (2)B type depth up to

Metre (Item Code 24008B R&B SOR 2023-24 Pg No 175)

45a Providing and fixing C.P. brass bib cock of approved quality

conforming to IS:8931 of Approved make as approved by

engg. in charge all complete. 15 mm Nominal Bore Dia

(Approved Rate) 434.2 No.

45b Providing and fixing C.P. brass angle valve of approved

quality conforming to IS:8931 of Approved make as

approved by engg. in charge all complete. 15 mm Nominal

Bore Dia (Approved Rate) 500.35 No.

45c 3.00 Providing and fixing C.P. brass shower rose with 15mm or

20mm inlet Shower Arm.(A) 100mm dia. Each (Item Code

46 Provdg. & laying S.W. Gully trap with C.I. garting brick

masonry chamber & water tight C.I. cover with frame of

12.00 300 mm x 300 mm size ( inside) with standard weight.

sqare mouth trap size 150 x100 mm P trap (Approved Rate)

47 Providing erecting and fixing double coated ISI water tank

of required capacity each with all necessary fittings and

connection etc. complete on terrace(Item Code 22014 R&B

SOR 2023-24 Pg No 158) 3.91 Litre

48 Extra rate over item of excavation of earth for excavation of

asphalt pavement/RCC of thickness up to 0.20 meter

including demolishing the asphalt carpet, metal, soiling /

cutting Reinforcement etc.comp. with stacking the material

as directed.-up to 0.20 meter thickness(Item Code 20003B

R&B SOR 2023-24 Pg No 140) 80 Sq.M.

49 P/F PVC / C.I. (span) nahni trap and all of the following

nominal dia of self cleanising design with C.I.Screw down

21.00 or hinged greeting inclusive cost of cutting and making

good the walls and floors for drain 75 mm dia. etc. comp.

(Aproved rate) 368.55 No.

50 a Providing laying and jointing in true line and level 15mm

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

70.00 C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

(Item Code 23061 R&B SOR 2023-24 Pg No 170)

50b Providing laying and jointing in true line and level 25mm

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

75.00 C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

(Item Code 23062 R&B SOR 2023-24 Pg No 170)

50c Providing laying and jointing in true line and level 32mm

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

15.00 C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all

materials.(Item Code 23036 R&B SOR 2023-24 Pg No 170)

50d Providing laying and jointing in true line and level 40mm

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

30.00 C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all

materials(Item Code 23064 R&B SOR 2023-24 Pg No 170)

50e Providing laying and jointing in true line and level 50mm

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

15.00 C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials

(Item Code 23065 R&B SOR 2023-24 Pg No 170)

51 Providing and fixing concealed center point to wall ceiling &

floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete(Item Code

52 Provdg. And fixing to wall ,ceiling and floor 10.00 kg.

F/Sq.Cm2 working pressure polythelene pipes of the

following outside diameter, low, density, complete with

special flange compression type fittings, wall clips etc.

making good wall ceiling and floor.(Item Code 23004F/G

R&B SOR 2023-24 Pg No 164)

a 60.00 (A) 75mm dia 274.68 Rmt

53 Providing and fixing water closet squatting Pan (Indian type

W.C. Pan) size 580mm (Earthwork, bed concrete, foot

3.00 reste and trap to be measured and paid for separately) (A)

Vitreous China.(I) Long pattern = White colour (Item Code

54 Providing and fixing 100mm size P or S trap for water

closet squatting pan including jointing the trap with the pan

3.00 and soil pipe in cement Mortar 1:1 (1-Cement : 1-Fine

sand)(A) Vitreous China.(Item Code 23011 R&B SOR 2023-

55 Providing and fixing in Cement Mortar 1:3 (1Cement: 3-

coarse sand)a, pair of white vitreous China 250mm x

3.00 130mm x 30mm footrest to long pattern squatting pan

water closet.(Item Code 23012 R&B SOR 2023-24 Pg No

56 Providing and fixing white vitreous china extended wall

mounting water closet of size 780x370x690 mm of

approved shape including providing & fixing white vitreous

12.00 china cistern with dual flush fitting, of flushing capacity

litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat

cover, and cistern fittings, nuts, bolts and gasket etc

complete. (Aproved rate) 13036.55 No.

57 Providing and fixing chromium plated brass half trun flush

0.00 cock of approved quality including fixing in pipe line etc.

complete. (Aproved rate)

58 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible

tube upto 1 metre long with S.S. triangular plate to

Eureopean type W.C. of quality and make as approved by

Engineer - in - charge.,(Aproved rate) 299.35 No.

59 3.00 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen

sink as per IS:13983 with C.I. brackets and stainless steel

plug 40 mm, including painting of fittings and brackets,

cutting and making good the walls wherever required

:Kitchen sink without drain board 610x460 mm bowl depth

200 mm (Aproved rate) 3337.85 No.

60 Providing and fixing wash basin with C.I. brackets, 15 mm

C.P. brass pillar taps, 32 mm C.P. brass waste of standard

pattern, including painting of fittings and brackets, cutting

15.00 and making good the walls wherever require:White Vitreous

China Wash basin size 550x400 mm with a pair of 15 mm

C.P. brass pillar taps (Aproved rate)

61 Provdg. & fixing 600mm x 450 mm Bevelled edge mirror of

superior glass mounted of .6 mm th. A.C. sheet or plywood

12.00 sheet and fixed to wooden pluge with C.P. brass screws

and washers(Item Code 23024 R&B SOR 2023-24 Pg No

62 Providing and fixing mirror of superior glass (of approved

quality) and of required shape and size with plastic

6.00 moulded frame of approved make and shade with 6 mm

thick hard board backing : Rectangular shape 1500x450

mm (Aproved rate) 1817.2 No.

63 Providing and fixing PTMT liquid soap container 109 mm

wide, 125 mm high and 112 mm distance from wall of

9.00 standard shape with bracket of the same materials with

snap fittings of approved quality and colour, weighing not

less than 105 gms.(Aproved rate) 146.3 No.

64 Providing and fixing toilet paper holder.(A) C.P. Brass (Item

Code 23026/8 R&B SOR 2023-24 Pg No 167) 414.53 No.

65 Provdg. & fixing C.P..Brass towal rail complete with C.P.

brass brackets fixed to wooden plugs with C.P. Brass

screws.(600 mmx 20 mm size) (Item Code 23025 R&B

66 Providing and fixing ball valve (brass) of approved quality,

High or low pressure, with plastic floats complete :(Item

Code 23030A/B/C R&B SOR 2023-24 Pg No 167)

67 Providing and fixing gun metal gate valve with C.I. wheel of

approved quality (screwed end) : (Item Code 23031 R&B

SOR 2023-24 Pg No 167)

68 Provdg. & fixing C.P.brass pillar tap capstan head, screw

down high pressure with screws shanks and back nuts. (A)

15 mm dia (Item Code 23029A R&B SOR 2023-24 Pg No

69 Providing and laying broken chine mosaic flooring for

terrace using 12 mm to 20 mm broken pieces of glazed

tiles to be laid over cement mortar 1:3 to plain or slope and

to be tempered to bring mortar creme out upto surface

150.00 using white cement including rounding off junctions and

extending them upto 15 cm along the wall,clearing with

water and oxalic acid etc. as directed.(Item Code

R&B SOR 2023-24 Pg No 124)

70 Providing and applying fibre reinforced elastomeric liquid

water proofing membrane with resilient acrylic polymers

having Sun Reflectivity Index (SRI) of 105 on top of

concrete roof in three coats @10.76 litre/ 10 sqm. One coat

of self-priming of elastomeric waterproofing liquid (dilution

with water in the ratio of 3:1) and two coats of undiluted

180.00 elastomeric waterproofing liquid (dry film thickness of

complete application/system not less than 500 microns).

The operation shall be carried out after scrapping and

properly cleaning the surface to remove loose particles with

wire brushes, complete in all respect as per the direction of

Engineer-in-Charge.( Aproved rate)

71 Providing and laying Cement concrete flooring for I.P.S.

1:2:4 (for Indian Patent Stones) (1 cement: 2 coarse sand:

4 graded stone aggregate 20 mm. nominal size) lain in

180.00 layer finished with a floating coat of net cement- 50 mm th

by addition of waterproof chemical etc. complete.( Aproved

rate) 232.05 Sq.M.

72 Providing and fixing M.S.grill, gate,stair / balcony railing

elevation element of required pattern in frames of windows

etc. with M.S. flats, square or round bars etc. including

priming coat with approved steel primer all complete. (

73 Applying priming coat over new steel and other metel

surface after and including preparing the surface by

throughly cleaning, oil, grease, dirt and other foreign matter

25.00 and scoured with brushes fine steel wood, scrapers and

sand paper with ready mixed priming paint brushing red

lead.(Item Code 19001 R&B SOR 2023-24 Pg No 136)

74 Painting two coats (excluding priming coat) on new steel

and other metal surface with enamel paint, brushing,

interior to give an even shade including cleaning the

surface an even shade including cleaning the surface of all

dirt, dust and other foreign matter.(Item Code 19002 R&B

SOR 2023-24 Pg No 136) 86.94 Sqmt

75 Providing and fixing stainless steel ( Grade 304) railing

made of Hollow tubes, channels, plates etc., including

welding, grinding, buffing, polishing and making curvature

(wherever required) and fitting the same with necessary

stainless steel nuts and bolts complete, i/c fixing the railing

with necessary accessories & stainless steel dash

60.00 fasteners , stainless steel bolts etc., of required size, on the

top of the floor or the side of waist slab with suitable

arrangement as per approval of Engineer-incharge, (for

payment purpose only weight of stainless steel members

shall be considered Including fixing accessories such as

nuts, bolts, fasteners etc.).(Aproved rate)

76 Providing and fixing in position collapsible steel shutters

with vertical channels 20x10x2 mm braced with flat iron

diagonals 20x5 mm size with top & bottom rails of T-iron

40x40x6 mm with 38 mm dia. Steel pulleys complete with

15.00 bolts , nuts , locking arrangement , stoppers , handles

including applying a priming coat of red lead paint & two

coats of enamel paint of selected shade & approved

make.(Item Code 11003A R&B SOR 2023-24 Pg No 105)

77 3.00 Providing corrugated G.I. sheet of class-3 roofing fixed with

glavanished iron J or L Hooks, Bolts and nuts 8mm

diameter with bitumen and G.I. limpet washer or G.I. limpet

washer. filled with white lead complete excluding the cost of

purlins, Rafters and Trusses.(1) 0.80 mm thick sheet..(Item

Code 15001A R&B SOR 2023-24 Pg No 125)

78 6.00 Providing valleys 900 mm. overall in plain 1.6 mm. thick

G.I. sheet Class – 3 fixed with ‘J’ or ‘L’ hook bolts and nuts

galvanized from ‘J’ or ‘L’ hook bolts and bitumen washers

complete.(Item Code 15003A R&B SOR 2023-24 Pg No

79 Providing and fixing window having extruded aluminum

Colour anodized section frame main outer size 63.50 x

38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two

track member size 61.85 mm x 31.75 mm x 1.20mm @

wt.of 0.695 Kg/mt, vertical member of size 61.85 mm x

31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with sliding

shutters of horizontal member size 40mm x 18mm x

1.29mm @ wt.of 0.456Kg/mt, vertical member of size

0.457 Kg/mt with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame

as per details etc complete for window.(Item Code

80 roviding and fixing standared extruded of alluminium

section of size 63mm x 38.10mm x 1.2mm @ Wt.

Kg/mt with colour anodized alluminium frame for ventilation

with 5 mm thick frosted glass as details etc complete for

Ventilation(Item Code11030 R&B SOR 2023-24 Pg No 108)

81 Providing and fixing standared extruded of

alluminiumsectionofsize63.50x38.10x1.95mm @Wt

1.094Kg / Rmt with colour anodized alluminium framewith

5mm thick transparent bronze colour tinted float glass with

colour anodizedalluminiumframe for ventilationwith5 mm

thick frosted glass as details etc complete for.window.(Item

Code 11029 R&B SOR 2023-24 Pg No 108)

Providing and fixing ISI marked 35 mm thick flush door

shutters conforming to IS : 2202 (Part I) decorative type,

core of block board construction with frame of 1st class

hard wood and well matched teak 3 ply veneering with

vertical grains or cross bands and face veneers on both

faces of shutters with 1.00 mm thick Decorative Laminated

Sheet on both faces of shutters including ISI marked

Stainless Steel butt hinges, bright /matt finished 125 mm

Stainless Steel handles of approved quality & make, ISI

marked oxidised M.S. door latches of Size 300x20x6 mm

conforming to IS:5930 with necessary screws etc. complete

as per direction of Engg. incharge. (Approved Rate)

a 65.00 Flush shutter with both side laminate 4238.5 Sq.M.

83 Providing and fixing 35 mm th. Shutters for doors windows

& clearstory windows incl. wood frames as specified

cm. x 7cm. size incl. anodised alluminium fixtures and

fastenings including primer coat of approved quality and

two coats of oil paint etc. complete. (Item Code

10032A/B/C R&B SOR 2023-24 Pg No 88)

a 3.00 Fully glazed 4788.50 Sq. M.

b 3.00 Fully panelled 5478.89 Sq. M.

c 3.00 Partly panelled and partly glazed 5133.69 Sq. M.

84 Providing and fixing FRP frame size 125x65 mm and

35mm thick FRP shutter with wood grain raised panneled

design finish shutter having extra reinforcement on sides &

edges in Gel coat finish. The core of the shutter & frame is

to be filed up with injected polyurethene foam done in situ

alongwith embedded wooden pieces for stiffening & also

taking hinges & fintures. The whole FRP frame & shutter is

to be water proof weather proof, termite proof & resistance

to mild acid/alkali. Rates are to be inclusive of S.S hinges

with fastener sleeve & alluminium fixtures & fastenings.

(Item Code 10036 R&B SOR 2023-24 Pg No 90)

Making connection of drain or sewer line with existing

manhole including breaking into and making good the

walls, floors with cement concrete 1:2:4 mix (1 cement :

coarse sand : 4 graded stone aggregate 20 mm nominal

size) cement plastered on both sides with cement mortar

1:3 (1 cement : 3 coarse sand), finished with a floating coat

of neat cement and making necessary channels for the

drain etc. complete (Approved Rate)

85 1.50 For Pipe 100 mm to 250 mm diameter 683.70 No.

86 1.50 For Pipe 250 mm to 300 mm diameter 785.90 No.

87 5.00 For pipes 350 to 450 mm diameter 1134.65 No.

88 Making connection of G.I. distribution branch with G.I. main

of following sizes by providing and fixing tee, including

cutting and threading the pipe etc. complete : (Item Code

a 1.50 25 to 40 mm nominal bore 757.10 No.

b 1.50 50 to 80 mm nominal bore 600.08 No.

89 Providing throating or plaster drip, grooves and moulding

to Wall , R.C.C. chajja and slab.(Approved Rate) 27.5 Rmt

90 Cementvata10cm.x10cm.sizequarterroundincement mortar

75.00 1:1 (1 cement : 1 sand including neat cement finishing)

(Item Code 15 R&B SOR 2023-24 Pg No 186) 2.55 Rmt

91 Carring out plinth treat ment to post construction/ existing

structure by spraying chemical solution for termite control

treatment including labour and material consist ment

withI.S.I specification. Using Chlordene and Chiorpur files

20EC. As Per 6131_ paret- II Consentration Weight one

100.00 percent is recommended i.e one litre 20EC chemical

emulsion with19 liter give1% concrentration inclusive of one

litre chemical emulsion appication at the rate of 5 Litre

chemical/ Sqm of surface is recommended as per I.S (Item

Code 22007A R&B SOR 2023-24 Pg No 157)

92 Carrying out wall treatment for termite control

includingsprayingwithchemicalsolutioninoilbase including

labourandmaterialUsingChlorpyriphos 20ECAsper

IS6313part- II (1%concentrationby mass) is recommended

i.e one litre chemical emulsion diluted with 19 liter oil base.

Total solution will be 20 liters inclusive of one liter

chemicalemulsionapplicationattherateof7.5litre chemical

/Sqmofsurfaceisrecommendedasper I.S..(Item Code

R&B SOR 2023-24 Pg No 157)

93 Providing and fixing pre-cast Rubber Dye / steel Dye

interlocking concrete block 60 mm thick with grade of

concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design Confirming to IS

15658:2006 including 35 mm Sand layer for levelling and

filling the joint with sand in proper line and level as per

guidline sof IRC : SP 632018 etc. Complete.(Item Code

94 Supplying and fixing of 300 mm-L x 150 mm-B x

mm-H Kerb block for Footpath in M-20 grade using

mm nominal size black trap aggregate of Sevaliya/Timba

or equivalent quality for pre-cast blocks, reasonably

exposed finish/ formwork , mould with well equipped

with vibratory system for kerb stones of approved

design including curing, etc. complete, including the

cost of formwork etc. complete. The rate shall also

include necessary cutting of asphalt, fixing the Kerb

stones in line and level on 5 cm thick sand bedding with

necessary equipments and materials. The rate shall also

include the flush pointing in CM (1:3) for all joints of the

kerbstones. Filling of zari alone the sides of the kerb

stone fixed with Bituminous concrete Bituminous

concrete / C.C. mixed in proper position to flush with

the road surface as directed by Engineer in change to

form a portable mixture. a) Laying on 5 cm thick Sand

Bedding (Approved Rate) 350.89 R.mt.

95 Designing, fabricating, testing, installing and fixing in

position Curtain Wall with Aluminium Composite Panel

30.00 Cladding, with open grooves for linear as well as curvilinear

portions of the building , for all heights and all levels etc.

including: (Approved Rate) 4474.2 Sq.mt.

(a) Structural analysis & design and preparation of shop

drawings for pressure equalisation or rain screen principle

as required, proper drainage of water to make it watertight

including checking of all the structural and functional design.

(b) Providing, fabricating and supplying and fixing panels of

aluminium composite panel cladding in pan shape in

metalic colour of approved shades made out of 4mm thick

aluminium composite panel material consisting of 3mm

thick FR grade mineral core sandwiched between two

Aluminium sheets (each 0.5mm thick). The aluminium

composite panel cladding sheet shall be coil coated, with

Kynar 500 based PVDF / Lumiflon based fluoropolymer

resin coating of approved colour andshade on face # 1 and

polymer (Service) coating on face # 2 as specified using

stainless steel screws, nuts, bolts, washers, cleats, weather

silicone sealant, backer rods etc.

(c) The fastening brackets of Aluminium alloy 6005 T5 / MS

with Hot Dip Galvanised with serrations and serrated

washers to arrest the wind load movement, fasteners, SS

316 Pins and anchor bolts of approved make in SS

Nylon separators to prevent bi-metallic contacts all

complete required to perform as per specification and

drawing The item includes cost of all material & labour

component, the cost of all mock ups at site, cost of all

samples of the individual components for testing in an

approved laboratory, field tests on the assembled working

curtain wall with aluminium composite panel cladding,

cleaning and protection of the curtain wall with aluminium

composite panel cladding till the handing over of the

building for occupation. Base frame work cost for ACP

cladding is included in this item rate. The Contractor shall

provide curtain wall with aluminium composite panel

cladding, having all the performance characteristics all

complete , as per the Architectural drawings, as per item

description, as specified, as per the approved shop

drawings and as directed by the Engineer-in-Charge.

However, for the purpose of payment, only the actual area

on the external face of the curtain wall with Aluminum

Composite Panel Cladding (including width of groove) shall

be measured in sqm. up to two decimal places.

96 Providing and Fixing Box type metal letters forming

composite box made from 1mm thick stainless steel plate

of grade 304 having brush finish of following font size to be

fixed at Main Gate in english and or Gujrati and including

fixing charges. etc. complete as per direction of Engg.

incharge. for Payment Purpose Height of Letter will be

a 6480.00 Upto 300 mm Height (Approved Rate) 110.74 R.Inch

97 36.00 Providing and Fixing MURAL made out of 2mm thick s.s.

plate grade 304, including making necessary design as per

Architect dwg. Through laser cutting including connection

to the R.C.C./Masonary with necessary frame,anchor

fastnuts,M.S.Plate etc. complete as per direction of Engg.

incharge. (Approved Rate) 8028.8 Sq.mt.

98 9000.00 Providing and Fixing Sinage - internal and external signage

boards with Vinyle Text on ACP sheet / 2 mm th. S.S. Plate

etc. complete as per direction of Engg. incharge. (Approved

Rate) 11.07 Sq.mt.

Electrical Work

S.N. Qty Items Unit Total Amount in Rs

S.N. Qty Items Unit Total Amount in Rs

1.0 INTERNAL WIRING

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell push &

1 accessories and earth continuity of following type, erected on PVC

/ Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling

rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in below

type of pipe erected with 6A Modular type switch and hum free

EME four or more step type electronic fan regulator with separately

mounted and accessories with earth continuity of following type

erected on PVC / Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected. with necessary

ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete

Point wiring for secondary light point with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires, in below type of

pipe to be erected complete with earth continuity and necessary

connection with primary light with accessories erected on Metal /

PVC / wooden box covered with 3 mm thick PC(Polycarbonate) /

Acrylic sheet for open / concealed wiring. with necessary Lamp

holder / ceiling rose / H.D.Connector as directed.

Note:- Maximum up to 6 mtrs length, excess will be

considered as Mains for Secondary Point.

(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

4 erected complete with Modular type switch & 5 pin Plug erected

on PVC / Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected with

following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from

nearby switchboard/mcb db board

(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu.

Wire from mcb db board.

(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete

Point wiring for on board Looped Plug with 6A Modular type

switch & 5 pin socket erected on PVC / Metallic/Wooden box,

5 63.00 single mounting base frame covered with textured / metallic/white 255.00 Pt

front plate modules erected on / in wall / ceiling with following

type accessories

Providing and erecting ISI mark Medium class RIGID PVC PIPES

of following size complete to be erected on/in wall or ceiling

6 erected with necessary PVC fittings & Junction boxes fixed with

adhesive solution & Clamps with following dia of pipes, in

approved manner as directed

Providing & erecting PVC Corrugated Flexible Conduit with

7 required nos. of coupling, PVC bushes, Check-nuts etc. complete

of following sizes.

Supplying & erecting XLPE(IS:7098)(I)-88 ISI

8 unarmoured copper cable 1.1 KV grade to be

erected as directed of following size.

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on wall/ceiling,

with 1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following

(A) with medium class Rigid PVC pipe and accessories

providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size (A) with medium class

Rigid PVC pipe and accessories

450.00 (a) 2 wire 4 sq. mm 111.00 Mtr

2.0 MCBDBs & MCBs

providing and erecting Miniature circuit breaker single pole

6A to 25A suitable to operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in existing box. confirming

to IS 8828/1996 with ISI Mark

Providing & erecting 240 V MCB double pole switch for motor

12 & inductive load (C Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following capacity

Sheets steel powder coated enclosure suitable for incorporating

One/Two nos. MCB.

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The

DBs should be used of same company of MCB to be used)

(A) single phase incoming and horizontal single phase outgoing (b)

sheet steel double door (IP-43)

providing and erecting Approved make ELCBs / RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for operation on

single phase 240 V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not incorporate any

electronic component. for following Max. rating erected as directed

Follow IS code :3043 is the guideline for the earthing

Providing and erecting required size HOT deep Galvanised iron

16 165.00 strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel 77.00 KG

board, Motors etc. using proper clamp.

17 75.00 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 787.00 KG

Providing and erecting HOT deep Galvanised iron strip wire 8 to

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm with constant

ohmic value surrounded by highly conductive compound with high

19 charge dissipation suitable for following type of applications with

chamber and heavy duty cover.(approved make OEM has to

submit test certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 / meter testing as

per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form,

Sulphar content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long time

Necessary test report must be submitted.

(b)For Electrical installation up to 11 KV in normal soil.

9.00 Length of Pipe : 2.00 mtrs 5703.00 E.a.

Back filling Compound :1 no. Bag of 25 Kg.

Light Fixtures & Fans

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/ aluminium die cast powder coated and high U.V.

& corrosion resistance with diffuser with company mark/name

160V to 270V, Power Factor more than 0.95, THD < 15%, CCT

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)

(A) Tube Light with integral driver

20.1 15.00 (iii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet

(A) Square/ Circular shaped Surface/Recessed Mount Downlight

with provision for spring loaded mounting clips complete.IP20

20.2.1 30.00 (i) 5-9 watts,Surge-2 KV 218.00 No

20.2.2 15.00 (ii) 11-15 watts, Surge-2 KV 423.00 No

20.2.3 15.00 (I) Mirror Light 9 Watts, wall mounted minimum 1 feet long 309.00 No

Providing & erecting Approved make Ceiling Fan with double

ball bearing with Condenser 230 volt A.C.50 Hz. 900 mm

sweep complete having 3 Aluminium blades, canopy erected

complete. [ Make shall be approved by Engineer in Charge]

Providing & erecting Approved make Power Saving 50 Watt

Ceiling Fan with double ball bearing ISI mark with Condenser

22 6.00 230 volt A.C. 50 Hz 1200 mm sweep complete having 3blades 1929.00 No

with aluminium blades with , canopy & 30 cm. down rod erected

with earthing.(Make shall be approved by Engineer in charge))

Supplying & erecting approved make low noise decorative exhaust

23 15.00 fan having size 200mm with 1350 RPM with square frame ABS 1687.00 No

body with inbuilt lowers & square frame.

Supplying & erecting fan hook box of 10 mm M.S. round bar

bounded to the RCC bars up to 50mm length each side and

pierced through a 16 Gauge M.S. box / Heavy Duty PVC box

complete erected concealed in Ceiling with necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan

hook or Fan box.

Supplying and erecting 19 / 20 mm. nominal bore Medium Class

26.0 2.00 M.S. Pipe down rod erected duly painted for fan complete with 107.00 Mtr

proper insulation without leakage and earthing.

0.00 EXTERNAL LIGHTING

Supply , Installation, testing and commissioning of pre-wired, LED

fitting /post top luminaries etc of all typesof external lights,

complete with all accessories and tube etc. directly on pole / pole

bracket , including connection with 1.5 / 2.5 sq. mm FRLS PVC

insulated,3 core flexible, copper conductor, with flexible conduits

and coupler and earthing etc. as required.

Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 1Watt and above assembled

on single MCPCB, efficiency more than 130 lm/w and corrosion

free High pressure die cast aluminum housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses with company mark/name engraved

or embossed 120 to 300 V,Power Factor more than 0.95, THD <

0.00 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency > 85 %.CREE /

OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux

(U.S.A.) make LED used for luminaire. ( fittings required LM-79 &

LM-80 certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges

(B) Flood Light (IP-65), Surge -4KV,Light must have 440VAC

0.00 line supply protection. It should withstand 48 hours for

440VAC line supply

12.00 (iv) above 90 to 120 watts 6501.00 No

Providing & laying approved make Double walled corrugated

pipes (DWC) of polyethylene(conforming to IS 14930 II )with

28.00 0.00 necessary connecting accessories of same material at required

depth in existing trench for laying of cable. below ground / road

surface for enclosing cable

270.00 (A)50 mm outer dia 62.00 Mtr

Supplying & erecting approved make Automatic liquid level

controller 6A. with sensor testing as per instruction of Engineer

in charge on site complete with wiring connection with existing

wires , with copper conductor from pump to upper and lower tank.

Supplying and erecting Flexible PVC insulated multistrand

30.0 0.00 multicore 1.1 kv grade ISI marked copper wires of following size

to be erected as directed.

420.00 e) 1.50 Sq.mm 3 core round PVC sheathed 45.00 Mtr

Providing & erecting water cooler having storage capacity 150 Ltr.

& cooling capacity 150 Ltr.per hour @ an ambient temp of 45˚ C.

The outlet temp. of the water should drop by 15˚C within a hour,

The water cooler should be comprising of hermetically sealed

compressor, fan motor, condensing unit, water tank surrounded by

evaporating, coil, thermostats, relay etc.complete with necessary

inlet & outlet connection. The body of water cooler will be made

from Stainless Steel.

Supplying & erecting 5 stage single reverse osmosis water

purification system with M.S. powder coated frame, prefilter

housing with 'O' ring presediment filter GAC filter, carbon filter

32 3.00 suitable buster DC pump capacity 80 psi, mention with 40 psi inline 15466.00 No

type post carbon filter auto low & high pressure switches with

following size of storage tank & LPH capacity & erected as

directed with one year comprehensive maintenance guarantee.

0.00 [B] 25 Ltr / Hr with 30 Ltr. S.S. Pressure Tank

Providing & erecting open well horizontal mono block pump set

33.0 0.00 with cast iron body, complete for three phase submersible motor

(B) 1 H.P. single phase open well motor pump set suitable for

6.00 LPM discharge @ 25 mtr. head, suitable for 32 mm dia. Delivery 9518.00 No

pipe with control panel.

0.00 SUB - TOTAL OF MISC.

0.00 FIRE EXTINGUISHER

1 Supplying & erecting D.C.P. type fire extinguisher for following 2000 No

capacity cartridge type with gun metal cap 150 gram CO2 gas

cartridge, powder and brackets confirming to IS 2171 1985 and

complete erected with necessary clamps made from 50 x 6 mm M

S Flat with nuts and bolts grouted in wall complete. [A] For 5 Kg

2 Supplying & erecting carbon dioxide (CO2) fire extinguisher user of 7700 No

following capacity with necessary clamps made from 50 x 6 mm

M.S. Flat with nut & bolts grouted in wall complete. [A] For 4.5 Kg

3 Supplying & erecting ABC powder type 'Ceasefire' type Fire 990 No

9.00 extinguisher as per IS 13849 or 1 Kg capacity with necessary

clamp for erection on wall

SUB TOTAL of FIRE EXTINGUISHER