supplying installation testing and commissioning of VT pump set having discharge 75 m3hr and head 35 m and other electro mechanical allied works at Raw water pumping plant for kuru rural water supply scheme

Cost towards all labour, tools, tackles and technician for taking out old and damaged VT pump set from Intake well along with column pipe with all accessories, demolition of mounting channel for installation of new VT pump set.

Supplying, Installation, Testing & Commissioning of Vertical Turbine pump set at raw water pumping plant kuru, capable of discharge 75 m3/hr against a total head of 35 meter meters (Make- Kirloskar/Mather and Platt/ Jyoti / WPIL) coupled with suitable SPDP vertical hollow shaft V.T squirrel cage induction motor 3 ph, 415 V ± 10% , 1400 to 1500 RPM, Make- Kirloskar/ Jyoti / C.G /ABB with suitable discharge head, base plate and accessories such as suitable M.S column pipe flanged type 50 ft. (10 ft. long – 05 nos.,) spider bearing, line shaft, cut less bush, foot valve with strainer, pressure gauge, double flanged C.I Sluice valve and C.I N.R valve rating PN 1.6 etc. all complete job. Testing of pump set on full load at site.

Cost towards breaking of old PCC foundation and removing of all residuals from pump house to outside with lead of 200m with all tools and tackles Complete, and lifting of old 10 HP VT pump set with column pipes, line shafts from intake well including all labours, tools and tackles etc. all complete.

Cost towards making new construction P.C.C foundation with stone chips, sand, cement, in the ratio (1:2:4) foundation nut bolts, spring washer, plastering, punning of foundation, all complete.

Cost towards supplying, Installation, testing & commissioning of free standing type floor mounted cubical LT motor control panel fabricated with MS sheet of suitable gauge and size duly painted with two coats of red oxide primer comprising of 200 Amp, 440V copper busbar arrangement 4 pole consisting of following accessories: (i) 160 Amp MCCB – 1 No. (Incoming feeder) (ii) 100 Amp MCCB – 02Nos (outgoing feeder). (iii) 100 Amp MCCB – 01No. (As spare) (iv) 32 Amp MCB -1 No. for lighting load and other utility load. (v)Fully Automatic Star Delta (FASD) Starter (L&K/Havell’s/Siemen’s/Schneider/BCH make) suitable for Above pump set or more etc.- 2 Nos. (vi) 3-phase Digital display Voltmeter & Amp Meter -2 Sets, Phase indicating light R-Y-B -3 Nos. (vii) Copper Bus Bar- 04 Pole 200 Amp, 415V Copper strip bus bar enclosed in MS sheet along with overload relay, Dry Run Protection, Motor protection device (MPD), Proper power & control wiring inside by suitable size of copper conductor and wires etc. all complete set including transportation and fitting & mounting charges at P/Plant.

Cost towards complete overhauling of 30 KVA,3 phase, 50 hz servo controlled voltage stabilizer by replacing its damaged parts such as operating motors, control card, R.C. unit, control transformer, neon lamp, pot switch, voltmeter, ammeter, micro switches DPDT & SPDT etc. all complete including labour, tools and technician cost.

Supplying and laying of 50 mm sq. 1.1 K.V grade, 3.5 core P.V.C insulated and sheathed unarmored Aluminum cable in air /wall from stabilizer to panel board as required with lugs socketing, making connection all complete. make – Polycab / Havell’s /KEI, ISI marked, (JSOR M-328 Energy deptt. )

Cost of supply & laying, commissioning of 3 core 16 mm² copper conductor cable 1.1 KV grade PVC insulated and PVC sheathed unarmored cable from panel to starter and starter to motor with lugs socketing. Make- Polycab / Havell’s /KEI, ISI marked.

Chemical earthing 3 meters and 80mm hole size with electrode and chemical compound etc. with watering pipe and locking arrangements including soldering, riveting, jointing G.I. flat strip 50mm X 6mm to all equipments or as per direction of E/I

Cost towards making earthing connection from earth pit to change over, stabilizer, panel, starter, motor with 6 SWG G.I wire. (JSOR 3.16 Energy deptt. )