SPECIAL REPAIRS TO BUILDING NO P-97 (04XJCO QTRS) AT REYNOLDS ROAD ARMY AREA TRICHY.

Amount

Taking down cement plaster of any description on brick or stone walls and ceiling including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed.

M&L for rendering in cement morter 1:6,15mm thick finished even and smooth without using extra cement on fair faces of brick/concrete surfaces complete all as specified and as directed.

M&L for rendering in cement mortar 1:3, 5mm thick finished the surfaces even and smooth on fair faces ceiling surfaces and without using extra cement complete all as specified and as directed.

M&L for rendering in cement morter 1:6, 10mm thick as a backing coat and finishing coat in cement morter 1:4, 5mm thick using WPC compound @ 3% by weight of cement finished even and fair complete all as specified and as directed (Note:- WPC shall be measured and paid in relevant item)

M&L for preparation of new plastered wall surface and applying two coat of cement base paint over a alkali resitant primer on wall surfaces complete all as specified and directed.

M&L for preparation of old treated surface by complete removal of existing treatment of any description over 10 cm girth or width, not other wise described and applying two coat of cement base paint over a alkali resitant primer on wall surfaces complete all as specified and directed.

M&L for preparation of new plastered wall surfaces and applying two coats of oil bound distemper over a priming coat using chalk whiting complete all as specified and directed

M&L for preparation of newly plastered wall surfaces and applying three coats of white wash all as specified and directed.

M&L for complete removal of existing treatment, preparation of old treated wall surfaces and applying two coats of oil bound distemper over a priming coat using chalk whiting complete all as specified and directed .

M&L for preparation of newly plastered ceiling surfaces and applying three coats of white wash all as specified and directed.

M&L for complete removal of existing treatment,washing with water and bleaching powder soloution and applying three coats of white wash on ceiling surfaces complete all as specified and directed.

M&L for complete removal of existing treatment,washing with water and bleaching powder soloution and applying three coats of white wash on walls complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick, light shades, (square/rectangular) area of each tile not exceeding 0.36 sqm,set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors etc.complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer of mortar in cement morter 1:6 for laying floor finishes complete all as specified and directed.

M&L for coloured / light coloured glazed ceramic tiles 300 x 200 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match as in vertical surface including 10 mm thick cement plaster as backing coat in CM 1:4 complete all as specified and directed.

M&L for non skid coloured/light coloured cermaic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match in floors etc. including and over 15 mm thick screed bed or bedding layer for laying floor tiles in CM 1:4. complete all as specified and directed.

M&L for machine cut kota stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as in flooring Including screed beding layer of cement morter 15 mm thick in CM 1:6 and including rounding of edges complete all as specified and directed.

M&L machine cut kota stone slab flooring 20-25mm thick laid over cement screed base laid and jointed with grey cement to match the shade of the slab including rubbing and polishing as in riser of steps, skirting, dado and pillar complete all as specified and directed.

M&L for granite slab (of any type) 20mm thick machine cut, laid over and including 20mm thick cement screed in cement mortar 1:6, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match with the shades of granite stone as in platforms/cooking tops including cutting and polishing etc., complete all as specified and as directed,

Rounding to edge of stone slabs one edge such as steps, cooking platform and other similar situatiion complete all as specified and directed.

M&L for chequred cement concrete tiles with gray cement and pigment 20 cm x 20 cm x25 mm thick set and jointed and pointed in neat cement slurry as in floors including and over 15 mm thick cement screed bed or bedding layer for laying floor tiles in CM 1:4. complete all as specified and directed.

M&L for drilling holes exceeding 25mm and not exceeding 60mm dia in 20mm thick granite top laid over 75mm thick RCC slab for bolts, pipes, etc. complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F for galvanised steel water tubing, medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc., fixed to walls/ceilings or laid in floors etc., complete all as specified and directed for following bore of pipes:-

(a) 15mm dia bore

(b) 20mm dia bore

Refixing of old steel tubing and connection in new or old position ( wall, ceiling, floors etc.,) steel tubing and connection, including cleaning for refixing of

(a) 15mm dia bore

(b) 20mm dia bore

Dismantling water tanks of capacity exceeding 500 and not exceeding 1000 ltrs and removing to store

S&F rotational moulded polyethylene water storage tanks of capacity 750 Ltrs (cylindrical vertical with closed top) hoistsed and fixed in position all as specified in SSR Part I and as directed.

S&F 20 mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grams) complete all as specified and directed.

Demolition of concrete of any description and in any position not otherwise specifically provided for all as specified and directed.

M&L for 15mm thick waterproofing plaster in cement mortar 1:3 mixed with WPC at the rate of 3% by weight of cement for sunken treatment complete all as specified and as directed. Note- WPC shall measured and paid in relevant item.

M&L PCC (1:5:10), Type E2 (using 40mm graded stone aggregate) as in filling of sunken floor all as specifiied and directed.

S&F in repairs vitreous china wash down water closet pan, (Pedestal pattern) white, excluding fixing bolts flushing cistern and flush pipe complete all as specified and directed.

S&F in repairs PVC low level flushing cistern 10 ltrs capacity with complete accessories, PVC flush pipe, PVC over flow pipe etc., and connected to water closet as per manufacturers instruction and as directed by the Engineer-in-Charge including removal of existing cistern etc.complete all as specified and directed.

S&F 15mm dia stop valve, fancy type cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F 15mm dia repairs stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F 15mm bore PVC connection with PTMT nuts, 450 mm long complete all as specified and directed.

S&F 15mm bore PVC connection with PTMT nuts, 600 mm long complete all as specified and directed.

S&F repairs vitreous china wash hand basin, white, flate back of size 600x480mm excluding taps, waste, chain and plug and porcelain stopper out including brackets complete all as specified and directed.

S&F waste coupling for 32 mm bore dia of discharge pipe of PTMT (half or full threaded) (Minium weight 45 gms) complete all as specified and directed.

S&F soap dish, vitreous China white, approximate size 160 x 160 x 90mm complete all as specified and directed.

S&F in repairs 15mm bore pillar taps, fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed.

S&F 15mm bore bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15mm bore bib taps, fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 75mm brass chromium plated shower rose of size swivel joints including shower arm, 15mm bore, 195mm long with bend of 45 degree with flange for fixing with 15mm bore pipe complete all as specified and directed.

S&F toilet paper hold white various china box type all as specified and as directed by Engineer in charge.

S&F towel rail, 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 190 gms) complete all as specified and directed.

S&F 32 mm bore high density polyethylene pipes (HDPE) of pressure rating 6 Kgf/cm2 including making thread for fixing with waste coupling complete all as specified and directed.

S&F in repairs stainless steel sink of over all size 495x420mm and bowl size with draining board and bowl size 410x330x160mm, made out of 1mm thick stainless steel sheet of good quality including provn of waste coupling and 40mm dia waste pipe fitted over a pair of CI brackets all as specified and as directed by the Engineer-in-Charge

Taking down eaves gutters and waste water pipes (any size or pattern), including all fittings, head, shoes, bends, swan necks etc, including removal to store complete all as specified and directed.

S&F PVC (SWR) floor trap,75mm outlet dia plain with grating including joining with solvent cement all as specified and directed

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110mm dia including breaking the existing pipe complete all as specified.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75mm dia including breaking the existing pipe complete all as specified.

S&F in repairs PVC (SWR) bends any radius with access door suitable for 110mm dia pipes all as specified and as directed

S&F in repairs PVC (SWR) bends any radius with access door suitable for 75mm dia pipes all as specified and as directed.

S&F in repairs PVC SWR branch piece double 'Y' equal or unequal 110mm bore with access door all as specified and as directed

S&F in repairs PVC SWR branch piece double 'Y' equal or unequal 75mm bore with access door all as specified and as directed

S&F in repairs PVC (SWR) Vent cowl suitable for 110mm dia vent pipe all as specified and as directed

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area not exceeding 1.5 sqm each including separating guard bars/grills/wire mesh etc., all as specified and as directed

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exceeding 1.5 sqm but not exceeding 4sqm each including separating guard bars/grills/wire mesh etc., all as specified and as directed

Taking down shutters of any description not exceeding 1sqm each including builders hardware all as specified and as directed

Taking down shutters of any description exceeding 1sqm but not exceeding 2 sqm each including builders hardware all as specified and as directed

Taking down and refixing in shutters In same opening of any description exceeding 1 sqm and not exceeding 2 sqm etc all as specified and as directed

M&L for second class hard wood, plain solid straight chowkats and frames rebated on the solid, rounded or chamfered put together with glue pinned at joints, supplied and fitted all as specified and as directed.

M&L for 35mm thick, 2nd class hard wood, glazed and skeleton door shutters open rebated and prepared to receive glass, gauze, etc. with sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); supplied and fitted to chowkats all as specified and as directed.

S&F 30 mm tthick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides fitted to chowkets complete all as specified and as directed

S&F in repairs 18/19mm thick preliminated particle boards interior grade, preliminated one side with dacorative choice lamination & other side blancing white lamination fixed with screws to timber frame work complete all as specified and as directed

S&F 6mm thick teak wood lipping on 12mm thick prelaminated particle board, fixed with nails complete all as specified and as directed

S&F stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wood/steel frames fixed in repairs, all as specified and as directed by the engineer-in-charge.

S&F steel windows with side hung shutters inlcuding projecting type hinges with chromium plate steel handles and steel peg stay, complete with glazing bars dovetailed or welded including one shop coat of zinc chromate primer complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge metred cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall in repairs by drilling 100mm long MS screws using PVC fastener all as per specification and directed.

S&F Factory made solid PVC molded door shutter with wood free EPS 28 to 30mm thick with 2,4,6 raised panel design with 2mm thick molded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing and all as directed.

S&F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed..

S&F 4mm thick sheet glass in squares n.exc 0.50 sqm each pane. plain ordinary quality and glazing with oil putty/wooden beads complete all as specified and as directed.

S&F in repairs 4mm thick sheet glass in squares not exceeding 0.50 sqm each pane, plain ordinary quality and glazing with oil putty/wooden beadscomplete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames, including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.

S&F securing glass of any description in existing metal frames glazed with putty/beads including removing loose or decayed putty/beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work complete all as specified and as directed.

S&F 75mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F 100mm size aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F 200mm size aluminium anodised barrel tower bolts, extruded section complete all as specified and as directed

S&F 75mm size aluminium handles, cast type, anodised complete all as specified and as directed

S&F 100mm size aluminium handles, cast type, anodised complete all as specified and as directed

S&F 150mm size aluminium handles, cast type, anodised complete all as specified and as directed

S&F aluminium alloy, anodised sliding door bolts 300mm long with hasp and stable (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and as directed.

S&F 300 mm mild steel ordinary rat tail rod pattern springs including rollar and rollar plate complete all as specified and as directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring with 140 mm over all length of cover plates, fixed in floor complete all as specified and as directed.

S&F in repairs continous piano hinges mild steel, bright finish or electro galvanised width of flaps when open in mm 30mm complete all as specified and as directed.

S&F in repairs curtain rail, aluminium alloy with fixing brackets, stops, rollers etc.complete all as specified and as directed.

S&F 40 mm dia cuboard knobs, 40mm dia, brass bright finished fixed with nuts, screws and washers of mild steel all as specified and as directed

M&L for preparation of new wooden surfaces of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed

M&L for preparation of new steel surfaces of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed

M&L for preparation of old wooden surfaces of any description exceeding 10cm width or girth applying one coats of synthetic enamel paint all as specified and as directed.

M&L for preparation of old steel surfaces of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed.

M&L for 75 mm thick plain cement concrete in 1:3:6, type C2, using 40mm graded stone agregate as in plinth protection all as specified and as directed.

M&L for brickwork built in CM 1:6 with subclass `B' bricks, straight or curved on plan exceeding 6m mean radius all as specified and as directed.

Demolition of brick work or stone/boulders masonry built in cement mortar or cement lime mortar all as specified and as directed.

Supply only integral Water proofing Compound.

al mecho fab