ANGANWADI WORK 43 AND 54 AND MINI MCF AND SHG WORKSHED

Amount

Anganwadi no.43&54,Mini MCF,SHG work shed

Stone for masonry work

Through and bond stone size 24x24x39cm

Portland cement

Royalty for good earth

Coarse sand(zone 3)

Stone aggregate 40 mm

Stone aggregate 20mm

Hire charge for Concrete mixer

Vibrator (needle 40 mm)

Structural steel such as tees,angles,channels

Red oxide zinc chromate primer

Adjustable telescopic prop 3 m

Beam clamp 300-380mm

Wall for panel 1250x500 mm

Corner angle 45x45x5 mm 1.5m long

100 mm Channel shoulder 2.5m long

Double clip

Single clip

M S Tube 40 mm dia

Wall for panel 1250x450 mm

Corner angle 45x45x5 mm 2.5 m long

Column clamp 450x1070

prop 2m (2-3.5m)

Second class kailwood in planks

Second class kailwood in scantling

Hollock ballies 125 mm dia

Adjustable span ESO+SI (2.35-3.40)

Stone aggregate (single size) 10mm

Twisted steel/deformed bars

Solid block of size 30x20x15 cm

Anjili wood scantls

Mild steel round bar above 12 mm dia

Flats up to 10mm thickness

Rawl plug 50mm (designation 10 nos)

Float glass sheets of nominal thickness 4 mm

Bright finished or black enameled ms hinges 100x58x1.90mm

Bright finished or black enameled steel butt hinges 50x37x1.50

Bright finished or black enameled steel Screws 40 mm

Bright finished or black enameled steel Screws 20 mm

Factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded

35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished

Powder coated M.S butt hinges 100 x58x1.9 mm

Anodised aluminium towern bolt (barrel type) 300x10mm

Chromium plated Brass screws 30 mm

200 mm aluminium aldrop

Anodised aluminum handels 125 mm with plate 175x32 mm

Chromium plated Brass screws 25 mm

Brass hard down hookes and eyes 150 mm

Fine sand (zone 4)

satna lime

Ceramic glazed tiles 1st quality 300x300 in all shades and design of white, Ivory, grey,Fume red, brown etc

Ceramic glazed tiles 1st quality minimum thickness 5 mm in all colours shades and design except burgundy, bottle green black

Vitrified floor tile 60x60 cm

Deharadun whitw lime

Pink primer (for wood)

Synthetic enamel paint in black or choclate shade

Plastic emulsion Paint

Inter locking C.C paver block (80 mm thick,M-30)

Black plastic seat (solid) with lid C.P brass hinges and rubber buffers

Vitreous china pedestal type water closet

Flushing cistern P.V.C 10 its capacity (low level) (white)(with fittingsm, accessories and flush pipe)

Vitrous china flat back wash basin 550x400

15 mm C.P brass tap

C.P brass waste 32 mm

C.I Bracket for wash basin and sinks

Stainless steel Kitchen sink- with out drain board 470x420 mm bowl depth 178 mm

Polythene water storage tank cover and suitable locking arrangement

PVC Pipe 20 mm outer dia 10 kgf/cm2

PVC Pipe 50 mm outer dia 6kgf/cm2

PVC Pipe 110 mm outer dia 6kgf/cm2

Mild steel tubes hot finished welded type

Welding by electric plant

G.I Trafford sheet 0.35

Bitumen washer

G.I Limpet washer

Galvanised steel J or L hooks 8 mm dia

Galvanised steel bots & nuts 6mm dia and 25 mm long round head with slots

Green net 75% shade

Galvanised wire mesh of average width of aperture 1.4 and nominal dia of wire 0.63

Wire nails

G .I Pipes 50 mm dia

G.I Pipes 40 mm dia

Epoxy paint

Mason (for plain sone work) 2nd class

Bhisti

Mason (average)

Blacksmith 2nd class

Carpentar 2nd class

Mason(brick layer) 2nd class

Carpenter (average)

White Washer

Assistant Fitter or 2nd class fitter

Bandhani

Fitter ( grade 1)

Painter

Black smith 1st class

Mason (brick layer) 1st class

Glazier

Carpender 1st class

mistry

Paulson K T

Bidder Name

Paulson K T

BIBIN MATHEW