PETTY REPAIR / MAINT / REPLACEMENT OF INTERNAL ELECTRIC WORKS AT VARIOUS OTM ACCN FOR JRC, JLA, SADAR AND CONNECTED AREA OF BAREILLY CANTT UNDER GE (WEST) BAREILLY.

Amount

Taking down carefully existing Aluminum/Copper point wiring (light/ Fan / Socket/Power Point) complete fittings etc. making good to disturbed surface of wall/Floor etc to match the existing surface/ finishes all as directed.

Material and labour for point wiring with single core PVC sheathed 1100 volt grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, with all conduit accessories, screws, rawl plugs (concealed conduit wiring in walls and casing capping on ceiling or roof) including pressed steel terminal sunken boxes and covered with 3 mm thick plastic laminated sheet cover of suitable size with new brass screws for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC sheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for:-

(a) One light / fan/ exhaust fan point controlled by one switch.

(b) One 5 pin 5 Amp switch socket out let point on an independent board.

(c) One 5 pin 5 Amp socket out let point controlled by one switch on same board.

(d) One buzzer/ bell point controlled by one push button on the same board with other switches or independent

(d) One light point controlled by two Nos switch 2 way

All as per item 2 here in before but for one 15 Amp 6 Pin switch socket out let independent with 2.5 Sqmm FRLS (Nominal Area) PVC unsheathed copper conductor single core multistranded incl 2.5 sq mm FRLS PVC copper conductor single core used as earth continuity conductor complete all as specified and directed.

Material and labour for point wiring with single core PVC sheathed 1100 volt grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, with all conduit accessories, screws, rawl plugs (concealed conduit wiring in walls and casing capping on ceiling or roof) including pressed steel sunken boxes suitable for modular fittings and covered with modular plate of any size and type with new brass screws for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC sheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for:-

(a) One light / fan/ exhaust fan point controlled by one switch.

(b) One 5 pin 5 Amp switch socket out let point on an independent board.

(c) One 5 pin 5 Amp socket out let point controlled by one switch on same board.

All as per item 4 here in before but for one 15 Amp 6 Pin switch socket out let independent with 2.5 Sqmm FRLS (Nominal Area) PVC unsheathed copper conductor single core multistranded incl 2.5 sq mm FRLS PVC copper conductor single core used as earth continuity conductor complete all as specified and directed.

S&F Switch piano, flush type single pole, one way 5 Amp complete all as specified and directed.

S&F Switch piano, flush type single pole, one way 15 Amp complete all as specified and directed.

S&F Socket outlet 2 in 1, 3 pin, 5A flush type complete all as specified and directed.

S&F Socket outlet 2 in 1, 6 pin, 15/5A flush type complete all as specified and directed.

Supply and fixing bell push switch flush type complete all as specified and directed.

S&FSwitch piano, flush type single pole, two way 5 Amp complete all as specified and directed.

S&F Modular switches 1 way, 6 A, 1 module complete all as specified and directed.

S&F Modular switches 1 way, 16 A, 1 module complete all as specified and directed.

S&F Modular sockets 6 A,-2/3 pin combined 2 module complete all as specified and directed.

S&F modular sockets 6 A/ 16 A,-2/3 pin combined 2 module complete all as specified and directed.

S&F in repairs P/switch flush type 5/6 Amp SP one way. complete all as specified and directed.

S&F in repairs P/switch flush type 15/16 Amp SP one way. complete all as specified and directed.

S&F in repairs ceiling rose 2/3 terminals complete all as specified and directed.

S&F in repairs lamp holder PVC Angular/ pendent/ bakelite complete all as specified and directed.

S&F in repairs socket outlet ,3/5 pin 5 amp flush type complete all as specified and directed.

S&F in repairs socket outlet 2 in one, 3/5 pin 5 and 15 Amp flush type complete all as specified and directed.

S&F in repairs Modular switches 1 way, 6 A, 1 module complete all as specified and directed.

S&F in repairs Modular switches 1 way, 16 A, 1 module complete all as specified and directed.

S&F in repairs Modular sockets 6 A,-2/3 pin combined 2 module complete all as specified and directed.

S&F in repairs Modular sockets 6 A/ 16 A,-2/3 pin combined 2 module complete all as specified and directed.

S&F in repairs Hylem sheet 3mm thick of size 8'' X 11'' including cutting of sheet for fixing switch / socket. complete all as specified and directed.

S&F in repairs Hylem sheet 3mm thick of size 8'' x 5'' including cutting of sheet for fixing switch / socket. complete all as specified and directed.

S&F in repairs Hylem sheet 3mm thick of size 5'' x 5'' including cutting of sheet for fixing switch / socket. complete all as specified and directed.

S&F in repairs Modular fan regulators step type, 120 W, 2 module any type and size. complete all as specified and directed.

S&F in repairs fan regulator resistance/electronic step piano type single phase 230 volt. complete all as specified and directed.

S&F in repairs MCB SPN 32 to 63 Amps 240 volts.10kA complete all as specified and directed.

S&F in repairs MCB SP 6 to 32 Amps 240 volts, 10 kA. complete all as specified and directed.

S&F in repairs MCB TPN 63 Amps,415V,10kA complete all as specified and directed.

S &F MCCB 16 kA,125Amp thermal magnetic and electronic earth leakage module including dismantling of existing old U/S MCCB completeall as specified and directed.

Taking down unserviceable existing sub main wiring with aluminium conductor stranded cable upto 6 Sqmm single core including earth wire from existing conduit or wooden battens including taking out unserviceable wooden gutties etc, matching with the existing surfaces complete all as specified and as directed.

M & L Sub main wiring concealed type with two single core cable PVC insulated cable with 4.0 Sqmm (Nominal area) multi stranded copper conductor cable 1100 volts gde incl earth continuity conductor using PVC insulated cable of copper conductor of size 4 Sqmm connected to common earth dolly and drawing into rigid PVC conduit with lock pattern incl. making good the disturbed surface complete all as specified and directed. (Note : PVC conduit and its accessories including 2 runs of cable & 1 run of earth continuity conductor cable unsheathed shall be measured and paid as single unit).

M & L Sub main wiring concealed type with two single core cable PVC insulated cable with 6.0 Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde incl earth continuity conductor using PVC insulated cable of stranded copper conductor of size 6.0 Sqmm connected to common earth dolly and drawing into rigid PVC conduits of 25 mm dia medium grade size incl. making good the disturbed surfaces complete all as specified and directed. (Note : PVC conduit and its accessories including 2 runs of cable & 1 run of earth continuity conductor cable unsheathed shall be measured and paid as single unit).

Supply and Fixing in repairs double door MCB distribution boards sheet steel, powder coated DBs suitable for MCBs fitted with bus bar, neutral link earth bar and din rail single phase and neutral confirms to IS : 13032-1991 of 4 ways complete all as specified and directed.

Supply and Fixing in repairs double door MCB distribution boards sheet steel, powder coated DBs suitable for MCBs fitted with bus bar, neutral link earth bar and din rail single phase and neutral confirms to IS : 13032-1991 of 8 ways complete all as specified and directed.

Supply and Fixing in repairs double door MCB distribution boards sheet steel, powder coated DBs suitable for MCBs fitted with bus bar, neutral link earth bar and din rail single phase and neutral confirms to IS : 13032-1991 of 12 ways complete all as specified and directed.

S&F in replacement LED batten with aluminium housing and integrated electronic driver 20watt 4 feet White colour including dismentiling and taking down any type of FTL/LED complete all as specified and directed by Engr-in-Charge. Make Cat Pt No LUMILINE+BS 20WLED830SPCSS of Havells / Orient Cat Pt No LBLN-20-C-SQ-AL / Jaquar Cat Pt No LKBS01SO20XC

S&F in replacement LED batten with aluminium housing and integrated electronic driver 10watt 2 feet White colour including dismentiling and taking down any type of FTL/LED complete all as specified and directed by Engr-in-Charge.

S &F in replacement of LED bulk head luminaire with aluminium die cast housing and vandal resistant cover finished in epoxy powder coated housing of 10 Watt incl all connection complete all as specified and directed by Engr-in-Charge. Make Cat Pt No RUGBYGENXFTS10WLED865SSYMBOPC of Havells or LIBHP-10-C-V1 of Orient and LBLK03X040XC of Jaquar

S&F in repairs building security light highly efficient front openable IP 65 LED street light with aluminium pressure die cast housing toughned glass in the front of peanut lense for batwing light distribution 20 watt CAt including GI pipe bracket 32 mm dia with clamp including complete connection wih copper wire all as directed and specified by Engr-in-Charge.

S&F in replacement of precisely designed decorative PMMA diffuser 2x2 panel LED recess/ surface mounted fitting 36 Watt, 230V, with integrated electronic driver high transcluent frosted diffuser, connector block, etc. complete with all accessories suitable for modular false ceiling internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

S&F PVC non metallic casing caping of 25 mm size with accessories including dismentaling/takingdown of old unserviceable/broken PVC conduit/cashing caping fixed on surface/concealed inclduing making good the disturbed surface complete all as specified and directed by Engr-in-Charge.

Supply and Fixing in replacement of PVC insulated Flexible twin core,copper cable multistranded 24/.0020sqmm,1100 V grade complete all spd and directed by Engr-in-Charge .

Supply and Fixing in replacement of PVC insulated multistranded copper conductor of size 1.5 sq mm , 1100 V grade complete all spd and directed by Engr-in-Charge .

Supply and Fixing in replacement of PVC insulated multistranded copper conductor of size 2.5 sq mm , 1100 V grade complete all spd and directed by Engr-in-Charge .

Supply and Fixing in replacement of PVC insulated multistranded copper conductor of size 4.0 sq mm , 1100 V grade complete all spd and directed by Engr-in-Charge .

Supply and Fixing in repairs Condenser 2.5 Mfd complete all spd and directed by Engr-in-Charge . make universal/Usha /Bajaj/Epcos.

Supply and Fixing in repairs Condenser 3.5 Mfd complete all spd and directed by Engr-in-Charge . Make universal/Usha /Bajaj/Epcos.

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600x 6.0 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel and connecting to main switch or switch board complete and incl PCC masonry pit of 300x300x300mm interier diamentions in PCC 1:2:4 type B1 RCC cover with GI frame, charcoal and common salt 15cm in layers all round the earth plate, 15mm dia GI watering pipe, a funnel with wire mesh should be provided on top of watering pipe complete all as specified including testing after completion.

Supply and fixing in replacement of aesthetically designed IP 65 LED post top with aluminium enclouser, powered with high power LEDs as light source and die cast heat sink , Alumnium PDC heat sink, opal PC diffuser and clear acrylic with all fixing arrangement as reqd at site of cap 50 Watt complete all spd and directed by Engr-in-Charge .

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed 10 sq. mm x 2 core nominal cross section complete all spd and directed by Engr-in-Charge .

Notes:- Tenderers may note that amount as given in schedule of credit will be deducted from the total amount to worked out the net contract sum at the time of Acceptance of tender.

N S ELECTRICALS (BID ID -3116051)

M/s Yash Trading Company (BID ID -3110048)

S S ELECTRICALS (BID ID -3108548)

M/S MAHIRA ENTERPRISES (BID ID -3119791)

K.S.Traders (BID ID -3106895)

LEEJA ENTERPRISES (BID ID -3102083)