PROVN OF OTM AND ALLIED INFRAINCLUDING 350KW SOLAR POWER PLANT FOR EME BN AT NAGROTA

Amount

Sch 'A' Part - I (Building Works). This Schedule is not prepriced by MES and the pre-priced rate indicated as "Rs. 0.00" under column 5 signifies this fact only.

Construction of Admin block (D/S) complete all as shown on drawings and as specified.

Construction of block of guard house and Ancilories ACCN (S/S) complete all as shown on drawings and as specified.

Construction of block of MT store & Technical office (S/S) complete all as shown on drawings and as specified.

Construction of block of storage ACCN for 197 FWC & 273 FWC (S/S) complete all as shown on drawings and as specified.

Construction of block of EME field repair workshop for 273 FWC and office & ADM Sec (D/S) complete all as shown on drawings and as specified.

Construction of block of single living accn for OR's Cook House, Dinning Hall & Tradesmen shop (D/S) complete all as shown on drawings and as specified.

Construction of block of JCO's Mess and club (D/S) complete all as shown on drawings and as specified.

Construction of technical block (D/S) complete all as shown on drawings and as specified.

Construction of block of grages (9-A) (S/S) complete all as shown on drawings and as specified.

Construction of block of garages (9-B) (S/S) complete all as shown on drawings and as specified.

Construction of block of garages (9-C) (S/S) complete all as shown on drawings and as specified.

Construction of block of garages (9-D) (S/S) complete all as shown on drawings and as specified.

Construction of block of garages for 5 bays car parking / scooter shed complete all as shown on drawings and as specified.

Construction of block of garages for 4 bays car parking / scooter shed complete all as shown on drawings and as specified.

Construction of Incinerator complete all as shown on drawings and as specified.

Construction of flag staff with base complete all as shown on drawings and as specified.

Construction of washing platform complete all as shown on drawings and as specified.

Construction of garbage bin complete all as shown on drawings and as specified.

Construction of gate office complete all as shown on drawings and as specified.

Total Amount of Sch 'A' Part - II (Internal Water Work)

Total Amount of Sch 'A' Part - III (Internal Electrification)

Total Amount of Sch 'A' Part - IV (Plumbing Work)

Total Amount of Sch 'A' Part - V ( Site clearence and area development)

Total Amount of Sch 'A' Part - VI (Retaining wall /Protective Work)

Total Amount of Sch 'A' Part - VII (Area Drainage work)

Total Amount of Sch 'A' Part - VIII (Road, Path, Culvert and Hard standing Work)

Total Amount of Sch 'A' Part -IX (Sewage disposal Work)

Total Amount of Sch 'A' Part - X (FENCING AND GATE)

Total Amount of Sch 'A' Part - XI (External Water Supply Work)

Total Amount of Sch 'A' Part - XII (FLAME PROOF LIGHT)

Total Amount of Sch 'A' Part - XIII (External Electric Supply Work)

Total Amount of Sch 'A' Part - XIV (Lightening Protection Work)

Total Amount of Sch 'A' Part - XV (Hot Water Supply Work)

Total Amount of Sch 'A' Part - XVI (REFRIGERATION / AIR CONDITIONING)

Total Amount of Sch 'A' Part - XVII CRANE)

Total Amount of Sch 'A' Part - XVIII (SOLAR POWER PLANT)

Total Amount of Sch 'A' Part - XIX (DISMENTLING/DEMOLITION)

Sch 'A' Part - XX(Misc Items work) Note : This Schedule is not Pre-Priced by MES and the Pre-Priced rate indicated as "Rs. 0.00" under col.5 signifies this fact only.

Supply and fixing complete set of automatic sliding gate of GAZE ISO 9001, GOST R, IRAM, UKAS,TUV quality assured micro computer controlled "SLID -O" double leaf automatic sliding door system with Card for entry and exit including 8 bit micro computer controller, DC 24V brush less motor and with teethed belt all as specified and directed.

Supply and fixing complete set of road boom barrier upto 4mt BEVX4 (Brand Allmatic made in Italy) with Push button 2Nos, Remote 2 Nos, Flashing Lamp 2Nos, Photocell pair 2Nos for entry and exit of Main block all as specified and directed.

Cat eye OS-776 of OSCAR SAFTY SOLUTIONS (100X100X20) complete all as specified as per manufacturer's instructions and directed.

Raod studs, aluminium alloy pressure dia cast OS-786 of OSCAR SAFTY SOLUTIONS (100X100X20) complete all as specified as per manufacturer's instructions and directed.

Road safety convex mirror Model OS-791 dia 100cm complete all as specified as per manufacturer's instructions and directed.

S&F ABS speed breaker of OS-793 of SAFTY SOLUTIONS (75X500X425) complete all as specified as per manufacturer's instructions and directed.

S&F stainless steel round pipe delineartors with reflective tape of OSCAR solution model No OS-802 complete all as specified as per manufacturer's instructions and directed.

Road marking paint, providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semi automatic thermo plastic paint applicator machine fitter with profie shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc complete all as per direction of Engineer-in-charge and accordance with applicable specification.

Supply , installation commissioning and testing solar power plant of capacity 350 KW on grid connected roof top solar power plant with allied infrastructure all as specified and directed by Engr-in-Charge. Consultancy services & designing of 350 KW solar plant including the following:- (a) Site survey to conduct feasibility study. (b) Estimation of yearly generation. (c) Shadow analysis of proposed site. (d) DPR including all above studies and analysis. (e) Detailed specifications of proposed components of solar power plant. (f) Preparation of BOQ and drgs. Make:- As per MNRE approved make list. NOTES:- 1 Design shall be vetted by Govt agency/ MNRE or IIT/NIT and approved by accepting officer before execution of work and no extra payment shall be paid on this account . 2 Installation of solar power plant will be carried out as a per DPR/BOQ submiotted by contractor duly vetted by IIT/NIT and approved by AO in presence of consultalt/authorized rep & agency preparing DPR will be responsible for complete execution, commissioning & testing and rate for the same deemed to include in item rate 3 Installation will be done on both new bldgs as well as existing bldgs depending on orientation. The total cost is inclusive of total system cost, its installation, commissioning, transporation, insurance, and applicable fees and taxes.

Supply anfd fixing jointing kit for 1100 Volts (Earthed) grade cable for indoor/outdoor termination Heat shinkable type joint complete with jointing meterial and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 400-500 Sqmm complete all as specified and as directed by Engr - in- Charge. Make:- 3M Electricals Markets Division, Cat Part No. MHI/OX1.1KV(HESL-6/4C)

Material and labour for cutting of existing pipeline of 150mm dia for taking branch connection alongwith insertion of GI tee of suitable size and connection material

Material and labour masonary chamber (valve pit) for opening and closing valve of internal dimensions (900mm x 900mm x 900mm) build in CM 1:6 including fixing MS sheet cover 3.15 mm thick over angle iron frame of size 50x50 x6 mm with laying and locking arrangement and 15mm thick cement plaster in CM 1:4 internally with two coat of synthetic enemal paint over one of red oxide primer including necessary excavation and eath work in any type of soil/strata, complete all as specified and directed.

Material and labour masonary chamber (valve pit) for opening and closing valve of internal dimensions (1200mm x 1200mm x 1200mm) build in CM 1:6 including fixing MS sheet cover 5 mm thick over angle iron frame of size 40x40 x4 mm with laying and locking arrangement and 15mm thick cement plaster in CM 1:4 internally with two coat of synthetic enemal paint over one of red oxide primer including necessary excavation and eath work in any type of soil/strata, complete all as specified and directed.

Supply & Install voltage stabilizer for automatic operation, single phase naturally air cooled indoor type and design for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy +/- 2.5% and of capacity 1 KVA.

Supply & Install voltage stabilizer for automatic operation, single phase naturally air cooled indoor type and design for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy +/- 2.5% and of capacity 2 KVA.

Supply & Install voltage stabilizer for automatic operation, single phase naturally air cooled indoor type and design for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy +/- 2.5% and of capacity 5 KVA.

Supply, installation and commissioning and testing Refrigerators double door frost free electric driven single phase 240 volt 50 Hz capacity 310 /311 Ltrs with 5 star rating all as specified and directed.

Supply, installation and commissioning and testing Refrigerators double door frost free electric driven single phase 240 volt 50 Hz capacity 360 Ltrs with 5 star rating all as specified and directed .

Supply & Install desert cooler electric driven operation on single phase,230 volts, 50Hz, Ac supply having nominal air flow capacity of 4000 Cum/Hr , fan size 450mm, complete with submersible water pump, maximum power consumption 250 watt alongwith angle iron supporting bracket made out of 50X50X6mm and making necessary arrangement for fixing of stand in the wall / floor by making holder and using PCC and making good the disturbed surfaces, complete all as specified and directed (Plastic Body/PVC Body).

Supply, installation, commissioning and testing Refrigeratior single//double door frost free electric driven single phase 240 volt 50 Hz capacity 190 Ltrs with 5 star rating all as specified and directed. Make:- Godrej/Whirlpool or equivalent.

Supply and fix water heater storage type, electric, capacity 50 litres. BEE 5 star rated complete all as specified and directed by Engr - in- Charge. Make:- Havells, Cat Part No. GHWAMGSWH050

Supply ,installation, commissioning and testing of EOT crane electrically operated on 3 phase 415 Volts over head crane of capacity 5 ton as per design standard IS-807-1976 & 3177-1999 duty class-II as per IS 3177 & IS-807 including electrical and mechanical parts, control panel, cable, double girder box type plate fabricated as per IS-807- 1976 & 3177-1999, DSL system and gear box totally encloused dust proof splash lubrication type gears etc. The crane shall have electrically operated vertical and horizontal movement complete and shall be provided within the hanger including all accessories for lifting the goods, etc. The overhead crane (EOT crane) specifications are as under:- (a) Span= suitable for 38.6 mtrs (b) Capacity=5 Ton (c) Power Supply = 415 volts 3 phase at 50Hz (d) Longitudial traverse speed = 20 mtr/min (e) Cross traverse speed =15 mtr/min (f) Crane hoisting speed = 3.0 mtr/min (g) Hoist travelling height from floor of hanger = 7 mtr(minimum) (h)Suitable for Bay length =55 mtr Note:- The EOT crane shall also be provided with suitable capacities and no of squirrel cage motors for main hoist -01 Nos, Cross travel-01 No, long travel-02 Nos with suitable VVFD drive. Crane shall also be provided with suitable hydraulic thruster type BREAKING SYSTEM for main hoist cross travel and long travel. Drum couplings with suitable dia wire ropes of min tensile grade 157 N/Sqmm connected with "C" SHANK type hook with safety latch shall be provided. Wheel-04Nos,160mm dia for cross travel and 04 Nos, 200 mm dia for long travel. PLATFORM with full length on each side of bridge girder with rubber cushioning shall be provided. Crane has to be provided with two coats of zinc chromite primer followed by two coats of golden yellow synthetic enemel paint. Note:- Any other item required for smooth & efficient operation of the crane will be part of the item and no extra amount will be paid on this account. Make- Rockwell Hoisto cranes Pvt. Ltd/Cranex limited/Kone cranes.

Supply and fixing flameproof cum weather proof single LED tube light fitting 20 watt, 4ft , 230V AC including following tecchnical details:- a) Make- Prateek Explosionproof Pvt.Ltd b) Material - Cost Aluminium Alloy LM-6 c) Rating: 1x 20Watt x4 Ft LED tube light fitting at 230 VAC d) Tube: Philips /Crompton e) Glass : Heat & Stress Free Clear type borosilixare Glass f) Reflector: M.S Vitreous enemeled g) Gasket :Noeprene gasket h) Wireguard: M.S Galvanised j) ENTRY : 3/4 " ET - 2 Nos - Cable Entries k) Temp class : T6 l) Protection: IP66 m) Hardware: Stainless Steel n) Earthing : One Nos.Internal (M4) & two Nos. External (M6) o) Finish : Anti corrrosive epoxy powder coated (631 shade of IS5) p) Standard: IS /IEC 60079-1 :2007, Zone 1,2,21 & 22 (q) Certificate: Approved and certified by CIMFR (r) CAT NO> PE/EXFTL/90 HSN CODE : 9405

Supply and fixing flame proof heavy duty exhaust of 12" (300 mm) sweep, made out of dynamically balanced hub of aluminium alloy LM -6, having air discharge capacity of 1250CFM, coupled with flameproof motor of o.25HP, Single phase, 1440 RPM, noise level < 78 db, duly, IP66 approved and certified by CIMFR complete all as specified. Make:- Prateek Exposionproof Pvt. Ltd

Supply and fixing flameproof cum weather proof distrubution board 4 way incl following technical detail:- a) Make- Prateek Explosionproof Pvt.Ltd b) Size: (600x450x300)mm c) Material - Cost Aluminium Alloy LM-6 d) Components : Main incomer-32A, DP/MCB-01 Nos. Outgoing - 16A,SP /MCB-02 Nos. e) Entry: 3/4" ET 03 Nos. on bottom side. f) Temp class : T6 IP: IP55 g) Hinges: Stainless steel hinges-02 Nos. h): Terminal: 2.5Sqmm-06 Nos. clip -on type din rail mounted (connect well) j) Hardware: Stainless Steel k) Earthing : One Nos.Internal (M4) & two Nos. External (M6) l) Finish : Anti corrrosive epoxy powder coated (631 shade of IS5) m) Standard: IS /IEC 60079-1 :2007, Zone 1,2,21 & 22 n) Certificate: Approved and certified by CIMFR o) CAT NO> PE/EXDB/90250 p) CIMFR: CIMFR/TC/P/260 q) PESO: P33654/5 r) HSN CODE: 8536

Supply and fixing flameproof cum weather proof rotary switch 16 amp incl following technnical detail:- a) Make- Prateek Explosionproof Pvt.Ltd b) Type: Indirect c) Material - Cost Aluminium Alloy LM-6 d) Rating: 16 Amp, 230 Volts AC e) Components : 16A, DP rotary switch, 230VAC-01 Nos. f)Cable entry: 3/4" ET -02Nos. g) Temp class : T6 h) Protection: IP66 j) Hardware: Stainless Steel k) Earthing : One Nos.Internal (M4) & two Nos. External (M6) l) Finish : Anti corrrosive epoxy powder coated (631 shade of IS5) m) Standard: IS /IEC 60079-1 :2007, Zone 1,2,21 & 22 n) Certificate: Approved and certified by CIMFR o) CAT NO> PE/EXRS/90 p)HSN CODE: 8536

Material and labour for construction of platform for installation of transformer of size 3mx2.5mx1.2m including necessary earth work, fencing and gate complete all as shown on drg No. CEUZ/TD 1516/15 sheet (1/1) complete all as specified and as directed by Engr - in-Charge.

Supply and fixing cable jointing kit for 1100 Volts (Earthed) grade cable for indoor/outdoor termination Heat shrinkable type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 240-300 sqmm complete all as specified and as directed by Engr-in-charge. Make - 3M Electricals Markets Division, Cat Part No. MHI/OX1.1KV(HESL-5/4C) or equivalent in other approved make..

Supply and fixing cable jointing kit for 1100 Volts (Earthed) grade cable for indoor/outdoor termination Heat shrinkable type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 70-120 sqmm complete all as specified and as directed by Engr-in-charge. Make - 3M Electricals Markets Division, Cat Part No. MHI/OX1.1KV(HESL-3/4C) or equivalent in other approved make..

Supply and fixing cable jointing kit for 1100 Volts (Earthed) grade cable for indoor/outdoor termination Heat shrinkable type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 25-50 sqmm complete all as specified and as directed by Engr-in-charge. Make - 3M Electricals Markets Division, Cat Part No. MHI/OX1.1KV(HESL-2/4C) or equivalent in other approved make..

Supply and fixing steet light bracket made out of GI pipe light grade not less than 1.5 metre long 40mm dia duly bend by 120 degree by means of cutting, welding including clamps made out of 50x6 mm flat iron, nuts , bolt washer etc, including painting one coat of synthetic enemal paint over a coat of red oxide suitable for street light pole complete all as specified and directed by Engr-in-Charge.

Supply and fixing LED street light 70 watt, pinnacle plus, made up of pressure die cast aluminium housing with integrated polycarbonate lens, high power ceramics LEDs with IP66 protection, 10KV SPD included complete all asa specified and directed by Engr-in-Charge. Make:- Crompton, Cat Ref-LST-70-CDL)

Supply and fixing LED food light 60 watt, made up of pressure die cast aluminium housing with toughened glass and high pwer LEDs; and secondary lenses with IP66 protection, 10KV SPD included complete all as specified and directed by Engr-in Charge. Make :- Crompton, Cat Ref-LST-60-CDL/60M)

Supply and fixing thermoplastic cable junction box/distribution board IP55/IP65 with metric knock outs for cable entry of size 16 sqmm x4 core includding MS clamp of size 25x3 mm including nut bolt etc. With LT pole box size 200x160x98 mm hinged cover with locking arrangement including with terminal K9105, MCB SP 6 Amp aluminium bus bar of 4 strip Make: Hensel (cat ref-KF5255) or equivalent of sintex complete all as specified.

Supply , laying and testing PVC insulated, FR PVC round sheathed cable galbanised with stranded copper of size 1.5 sq mm,,2 core ,1100 volts grade. Make: Havells, cat ref -WHMFDSKB21x5 (for street light connection from junction Box, pere pole 6RM x50 polles)

Material and labour digital time switching including all fittings for timer switch programmable every 1 min, with backup of 6 years, 28 memory locations, current capacity 16A, weekly program, with 1 changeover (1CO), total 28 programs complete all as specified and as directed by Engr-in-Charge. Make:-Indoasian or equivalent, model name-DIN type daily /weekly with 1 CO, cat ref TDA43110, HSN code:9107.

Supplying, installation, commissioning and testing of Lt switch gear control panel board 440 volt AC 3 phase 4 wire for out door installation "KIOSK TYPE" with sloping canopy fabricated out of steel sections i.e CRCA sheet 3.15 mm thick (14 SWG), angle / channel and flat iron sections of suitable size with opening on front and back, door in two halves fitted with handle and bolts for pad lock. The panel door shutters fixed with stainless steel hinges, heavy duty and with door stoppers. The door opening shall not be less than 150 degree. The construction of panel board shall be dust, vermin proof, IP 54 standard, with phosphatised powder coating painting externally and internally to protect against corrosion: The panel shall be mounted on suitable size of channel section having ground clearance 60cms from grouting bolts, conforming to IEC 60 439 complete duly incorporated with following accessories: - (Main Panel - 1) (a) Bus bar chamber with electrolytic grade aluminum strip with heat shrikable sleeves with colour code supported on epoxy resin based insulators 4 strip of suitable length for current rating 1000 amps

(b) ACB 4 pole 415 V, with Thermal Magnetic Release (Manual Fixed Typee) of capacity 630 Amps = 02 Nos (incoming - one for transformer and one for solar power). (c) MCCB 4 pole 415 V AC, current rating 100 amps, breaking cap 25 KA =01 Nos Outgoing Adm Block) (d) MCCB 4 pole 415 V AC, current rating 400 amps, breaking cap 36 KA =01 Nos Outgoing - LT Panel 2)) (e) MCCB 4 pole 415 V AC, current rating 200 amps, breaking cap 25 KA =01 Nos Outgoing -LT Panel 4) f) MCB SPN 220 V AC, current rating 6 amps, breaking cap 10 KA =01 Nos (Outgoing - Adm Block Parking) (g) MCB TPN 415 V AC, current rating 32 amps, breaking cap 10 KA = 02 Nos ( Outgoing - Street Lights) (h) Digital type AC voltmeter 0.500 V 96 mm square flush panel mounting =01Nos (on income supply) (j) Digital type AC voltmeter 0.800 Amp 96 mm square flush panel mounting =01Nos (on main load) (k) Voltmeter sector switch, type SG 101C, 10 amps 3 pole (RY-YB-BR-OFF-RN-YN-BN)=01 Nos. (l) Ammeter sector switch, type SG 101C, 10 amps 3 pole (R-Y-B--OFF)=01 Nos. (m) Indication pilot light to operate on direct supply 230 V AC with 2.4 watt bulb (R,Y,G) with smooth lens=03 Nos. (n) Complete wiring of the panel board with FRLS PVC insulated multistrand copper conductor cables of suitable current capacity end terminated with lugs and bolts, nuts and washers of galvanised iron. (o) Current transformer (Bar primery low tension )type CBF-0.6 -D1 ratio 800/5 amps,15 VA accuracy class -1 set pf three.

Supplying, installation, commissioning and testing of Lt switch gear control panel board 440 volt AC 3 phase 4 wire for out door installation "KIOSK TYPE" with sloping canopy fabricated out of steel sections i.e CRCA sheet 3.15 mm thick (14 SWG), angle / channel and flat iron sections of suitable size with opening on front and back, door in two halves fitted with handle and bolts for pad lock. The panel door shutters fixed with stainless steel hinges, heavy duty and with door stoppers. The door opening shall not be less than 150 degree. The construction of panel board shall be dust, vermin proof, IP 54 standard, with phosphatised powder coating painting externally and internally to protect against corrosion: The panel shall be mounted on suitable size of channel section having ground clearance 60cms from grouting bolts, conforming to IEC 60 439 complete duly incorporated with following accessories: - (Main Panel - 2) (a) Bus bar chamber with electrolytic grade aluminum strip with heat shrikable sleeves with colour code supported on epoxy resin based insulators 4 strip of suitable length for current rating 600 amps

(b) MCCB 4 pole 415 V,AC, current rating 400 amps, breaking cap 36 KA -01 Nos (incoming) (c) MCCB 4 pole 415 V AC, current rating 320 amps, breaking cap 36 KA =01 Nos Outgoing -273 FWC) (d) MCCB 4 pole 415 V AC, current rating 100 amps, breaking cap 25 KA =01 Nos Outgoing -197 FWC) (e) MCB SPN 2 pole 220 V AC, current rating 32 amps, breaking cap 10 KA =01 Nos Outgoing -MT Accn) f) MCB SPN 2 pole 220 V Ac, current rating 06 amps, breaking cap 10 KA =03 Nos Outgoing garage 01,02,03 (g) Digital type AC voltmeter 0.500 96 mm square flush panel mounting =01Nos (on income supply) (h) Digital type AC voltmeter 0.400 96 mm square flush panel mounting =01Nos (on main load) (j) Voltmeter sector switch, type SG 101C, 10 amps 3 pole (RY-YB-BR-OFF-RN-YN-BN)=01 Nos. (k) Ammeter sector switch, type SG 101C, 10 amps 3 pole (R-Y-B--OFF)=01 Nos. (l) Indication pilot light to operate on direct supply 230 V AC with 2.4 watt bulb (R,Y,G) with smooth lens=03 Nos. (m) Complete wiring of the panel board with FRLS PVC insulated multistrand copper conductor cables of suitable current capacity end terminated with lugs and bolts, nuts and washers of galvanised iron. (n) Current transformer (Bar primery low tension )type CBF-0.6 -D1 ratio 400/5 amps,15 VA accuracy class -1 set pf three.

Supplying, installation, commissioning and testing of Lt switch gear control panel board 440 volt AC 3 phase 4 wire for out door installation "KIOSK TYPE" with sloping canopy fabricated out of steel sections i.e CRCA sheet 3.15 mm thick (14 SWG), angle / channel and flat iron sections of suitable size with opening on front and back, door in two halves fitted with handle and bolts for pad lock. The panel door shutters fixed with stainless steel hinges, heavy duty and with door stoppers. The door opening shall not be less than 150 degree. The construction of panel board shall be dust, vermin proof, IP 54 standard, with phosphatised powder coating painting externally and internally to protect against corrosion: The panel shall be mounted on suitable size of channel section having ground clearance 60cms from grouting bolts, conforming to IEC 60 439 complete duly incorporated with following accessories: - (LT Panel- 4):- (a) Bus bar chamber with electrolytic grade aluminum strip with heat shrikable sleeves with colour code supported on epoxy resin based insulators 4 strip of suitable length for current rating 300 amps

Supplying, installation, commissioning and testing of Lt switch gear control panel board 440 volt AC 3 phase 4 wire for out door installation "KIOSK TYPE" with sloping canopy fabricated out of steel sections i.e CRCA sheet 3.15 mm thick (14 SWG), angle / channel and flat iron sections of suitable size with opening on front and back, door in two halves fitted with handle and bolts for pad lock. The panel door shutters fixed with stainless steel hinges, heavy duty and with door stoppers. The door opening shall not be less than 150 degree. The construction of panel board shall be dust, vermin proof, IP 54 standard, with phosphatised powder coating painting externally and internally to protect against corrosion: The panel shall be mounted on suitable size of channel section having ground clearance 60cms from grouting bolts, conforming to IEC 60 439 complete duly incorporated with following accessories: - (LT Panel - 3, Adm Bldg Left Wing) (a) Bus bar chamber with electrolytic grade aluminum strip with heat shrikable sleeves with colour code supported on epoxy resin based insulators 4 strip of suitable length for current rating 500 amps

Supply an fixing high round highbay light 100 watt in PDC housing suitable for industrial/workshop application. The luminaire has efficiency upto 110Lm/W to reduce quantity/wattage thereby redusing operationa;l cost weith ingress protection of IP 66 complete complete all as specified and directed by Engr-in-Charge. Make Cropton, Cat ref -LHB11-100-CDL/60-M

Supply and fixing rectangular LED flood light 100 watt, 5700 K, made up of aluminium die -acast housing luminaire with unique lense system for enhanced uniform illumination and toughened glass with silicon gasket for IP66 protection complate all as specified and directed by Engr-in-Charge. Make- Wipro, cat ref-LF20-122-060-57-G2

Supply and fixing wall mixer (Exposed adjustable legs) with telephone shower aggangement & crutch complete all as specified and directed. Make:- Jaguar, cat No. -SOL-6271

Supply and fixing 15mm bore two way stop valve/angle valve, chromium plated cast copper alloy screwed down high pressure a handle screwed both ends for iron pipe or union, complete all as specified and directed. Make:- Jaguar, product code -MQT -ESS-526AFKN

Supply and fixing health faucet 15mm bore premium chrome 2 in 1 (with tube & huck) complete all as specified and directed. Make:- Pear, cat No. -HF-131.

Supply and fixing modular white cover plate including modular base frame and powder coated modular sheet metal concealed box for 8 module complete all as specified and directed.

Supply and fixing modular white cover plate including modular base frame and powder coated modular sheet metal concealed box for 12 module complete all as specified and directed.

Suplply and fixing modular blanking plates 1 module complete all as specified and directed.

Supply and fixing sheet metal enclosure for DB's, MCB DB VTPN 4 way double door including 125A MCCB 10KA, 415 V as incomer IP 54 protection and isolated neutral and earth bus bar complete all as specified and directed.

Supply and fixing sheet metal enclosure for DB's, MCB DB VTPN 8 way double door including 125A MCCB 10KA, 415 V as incomer IP 54 protection and isolated neutral and earth bus bar complete all as specified and directed.

Supply and fixing MCB single pole 230 volts of capacity 63 A complete all as specified and directed.

Supply and fixing MCB single pole 230 volts of capacity 6 to 32 A complete all as specified and directed.

Supply and fixing LED bulb 7 watt B22 CDL 3 star lamp, 230V, 6500K complete all as specified and directed by Engr -in-Charge.

Supply and fixing air circulator fan heavy duty 230 V AC having sweep size of 600 mm complete all as specified and directed

Deduction to be made from BOQ for Schedule 'A' Part-XXI (Credit Schedule from dismentling/taking down items) worth Rs 28,77,952.50 during AOC. Note :- Tenderers shall not quote for this Schedule.

Onkar Nath Bhalla And Sons Contractor Pvt. Ltd.

Saru Enterprises Pvt Ltd

Rabina Enterprises Pvt Ltd

Agarwal Jagdish Construction Company Pvt. Ltd.

ENGINEER CONSTRUCTION PVT. LTD.

KAPAHI CONTRACTS PVT LTD

NITYA NAND AND SONS CONTRACTORS PVT LTD

SOOD ASSOCIATES PVT LTD