Renovation and Repairing

Amount

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge

Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material :All kinds of soil.

Extra for carriage of excavated earth to dumping site @ 5 km.

Providing and Laying dry stone soling maximum size 100-75mm hand packed tightly incl all costs and carriage.

Providing and laying in position specified grade of cement concrete excluding the cost of centering, shuttering, finishing and reinforcement.All work upto plinth level.1:4:8(1cement:4sand:8stoneaggregate)crushed 40 mm nominal size.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand)

12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 4 ( 1 cement : 4 fine sand)

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.

Dry random rubble masonry with hard and stone

Random Rubble masonry with hard and quarry stone with Cement mortar 1:6 (1 Cement : 6 coarse sand).

Centering and shuttering including strutting ,proppingetc and removal of form work. a)Foundations, footings, bases of columns etc. for mass concrete.

Centering and shuttering including strutting ,proppingetc and removal of form work. b) Suspended floors, roofs, landings, balconies and access platforms.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Mild steel and medium tensile steel bars.

Providing and laying in position specified grade of reinforced cement concrete includingcuring but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).

Dismantling tile work(damaged) in floors and roofs laid in cement mortar including stacking material within 50 meters .For thickness of tiles 10 mm to 25 mm

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown or as directed by Engineer-in-charge.

Dismantling C.I. or asbestos rain water pipes with fittings and clamps including stacking the material within 50 meters lead 100 mm dia pipe.

Providing and fixing of 2’x2’ size manhole C.I. cover and frame complete as per the directions of Engineer-in-charge.

Providing and fixing of master trap of standard quality

Constructing brick masonry chamber for underground C.I. inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg ) R.C.C. top slab with 1:1 ½ : 3 mix ( 1 cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design. a)Inside dimensions 455x610 mm and 45 cm deep for single pipe line or as as directed by Engineer-in-charge.

Constructing brick masonry chamber for underground C.I. inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg ) R.C.C. top slab with 1:1 ½ : 3 mix ( 1 cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design. b)Inside dimensions 600x850 mm and 45 cm deep for single pipe line with three or more inlets.

Providing and fixing of pvc floor trap/S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 ( 1 cement : 1 fine sand) including cost of cutting and making good the walls and testing of joints etc. complete

Providing and fixing PVC pipe of standard quality 4" dia: Length= 200' or 60.96m

Providing and fixing of pvc door bends of standard quality 4" dia

Providing and fixing of pvc door junction of standard quality 4" dia

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc.a) 20mm: Length= 50'

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc.b) 15mm: Length= 50'

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work).a) 20mm

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work).b) 15mm

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 20 mm nominal bore

Dismantling of flushing cistern of all types(C.I/PVC/Vitreous china) including stacking of useful materials near the site and disposal of unserviceable materials within 50 meters lead

Removing of existing Urinals including stacking of useful materials near the site and disposal of unserviceable materials within 50 meters lead

Providing and fixing white vitreous china pedestal typewater closet (European type) with seat and lid 10 litre low level white vitreous china flushing cistern and CP flush with fittings and C. I. brackets, 40mm diameter flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floorswherever required: WC pan with ISI marked white solid plastic seat and lid.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. Brass spreaders with Brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: Range of four urinal basins with 10 liter white P.V.C automatic flushing cistern.

Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 liter capacity- white.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing of hot water geyser of standard quality including all acesssories complete job-25lt capacity as directed by Engineer-in-charge.

Providing and fixing wash basin with C.I brackets, 15 mm C.P. brass pillar taps, 32mm brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White vitreous China Wash Basin size 630x450mm with a pair of 15mm C.P. brass pillar taps.

Providing and fixing White vitreous China pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. as per the directions of Engineer-in-charge.

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.

Providing and fixing of mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing. Rectangular shape 453x357mm.

Providing and fixing PTMT grating of approved quality and colour. 150 mm nominal size square 100 mm diameter of the inner hinged round grating.

Providing and fixing of C.P CISTERN PIPE of approved quality as per the directions of Engineer-in-charge.

Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4(1 cement : 4 fine sand).

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(2mm avg thickness)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats.

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work.

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture.

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) a)For fixed portion: Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) b)For shutters of doors, windows & ventilators includingproviding and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Anodized aluminum (Anodized transparent or dyed to requiredshade according to IS:1868, minimum anodic coating of grade AC 15)

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead :Of area of 3 sqm. and below

Dismantling aluminum / Gypsum partitions, doors, windows, fixedglazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material within 50 meters lead as directed by Engineer-in-charge.

Fixing of available aluminium partition section including cost of nuts/bolts and screws as per the directions of Engineer-in-charge

Filling the gap in between aluminum frame and adjacent RCC/Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.Upto 5mm depth and 5mm width.

Providing and fixing 12mm thick prelaminated particle board flatpressed three layer or graded wood particle board (conforming to IS:12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge. Pre-laminated particle board with decorative lamination on oneside and balancing lamination on other side.

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge. (Cost of aluminum snap beading shall be paid in basic item.)With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm)

Providing and fixing aluminum casement windows fastner of required length for aluminum windows with necessary screws etc. Complete job. Anodized (AC 15) aluminum

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete job : 300x10 mm

Providing and fixing aluminum round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-charge Anodized (AC 15) aluminum

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminum doors including necessary cutting and making good etc. complete.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Complete job.

Cleaning of tiles of floors and walls with chemicals, rubbing complete as per directions of Engineer-in-charge.

Carriage of materials from source to site a)Quarry Stone from 6km

Carriage of materials from source to site b)Stone aggregate from 10km

Carriage of materials from source to site c)Sand from 10km

Carriage of materials from source to site d)Bricks from 10km

Dismantling of existing heating/light/fan/bell/ socket out let point on separate board/ wiring and circuit with insulated wire in casing/ conduit/ batten fitting and accessories complete job.

Dismantling of existing socket outlet point on same board in any system of wiring with fittings/accessories complete job.

Wiring for light points with 3 x 1.5 sq mm FRLS PVC insulated multistarnded copper conductor single core 1100/660 volts voltage grade ISI marked in surface rigid 25 mm2 PVC 2 mm conduit including the cost of providing and fixing of 240 V, thick with 10/6 amp single pole modular type rocker operated flush mounted switch of approved quality ,Colour,make and design in 1.6mm thick GI box with moulded cove plate and earthing of fixtures and the outlet box with 1.5 Sq mm FR insulated multistarnded copper conductor of any colour laid inside same conduit etc as required including all connected charges for the complete job excluding cost of wire.

Wiring for 16 Amp socket outlets (1 outlet wired on one circuit) with 3 x4 sq mm (P+N+E) FRLS PVC insulated 660/110 voltage grade flexible stranded copper conductor wires in ISI embossed 25 mm dia PVC recessed of any colour laid inside same conduit etc as required including providing and fixing of 16 amps 3-pin switched socket of approved make and design in 1.6mm thick GI boxes with grid plates and earthing the third pin of socket outlet with 4 Sq. mm PVC insulated copper wire and all connected charges for the complete job excluding cost of wire.

Wiring for circuits for light/ Fan/5 Amp plugs etc with 2x2.5 mm 2 FR PVC insulated 1100 volt grade multistarnded copper conductor wire, FR 1.5 mm 2 Green insulated multistarnded copper conductor for earth wiring in existing conduits complete including connections all the three wires for phase, neutral and earth shall have to be taken to switch board and then distributed further (without PVC Conduits)

Wiring for exhausts fans etc with 3x2.5 mm 2 FR PVC insulated 1100 volt grade multistarnded copper conductor wire with 230V,3-pin 5/6Amps socket near exhaust fan and controlling 230 V,5/6A,SP grid plate mounting switch away from exhaust fan and wiring as follows with FR 1.5 mm 2 Green insulated multistarnded copper conductor for earth wiring in existing conduits complete including connections all the three wires for phase, neutral and earth.

Wiring for ceiling or wall fan etc with 3x2.5 mm 2 FR PVC insulated 1100 volt grade multistarnded copper conductor wire with 230V,3-pin 5/6Amps socket near fan and controlled by stepped regulator 200 watts,5/6A control switch and 15mm dia circular or hexagonal in 1.6mm thick MS zinc passivity sheet steel body and 12mm dia MS bar hook complete of suitable colour 3mmm thick 200 mmm dia laminated circular cover, with FR 1.5 mm 2 Green insulated multistarnded copper conductor for earth wiring in existing conduits complete including connections all the three wires for phase, neutral and earth.

Supplying,fixing,installation, testing and commissioning of Ceiling fans/wall fans of standard make(Crompton Greeves,Havells,Usha or Equivalent make) (300 mm sweep, air delivery = 100cubic m./ min. speed= 1800-2100 rpm, power consumption = 65-100 W, 3- blade, colour = white/ grey) including all connected charges for the complete job.

Supplying, fixing & testing of exhaust fan with shutters of standard make(Crompton Greeves,Havells,Usha or Equivalent make) (200 mm sweep, speed= 1800-2100 rpm, power consumption = 65-100 W, 3- blade, colour = white/ grey) including all connected charges for the complete job.

Supply and fixing of 25 mm, 2 mm thick PVC ISI certified Channel square conduits in following sizes required at site including cost of junction boxes, bends, elbows, sockets, tees,Chinese nails etc laying in slab/ floor cutting chassis and making good or surface mounted including all fixing charges for the complete job.

Supplying,fixing,installation, testing and commissioning of 9 Watt LED Bulb 6500 K luminaries with Flat/Angle(L-type) Batten of Hevell's,Anchor,GM or equivalent make depending upon the site conditions.

Supplying and laying of 4 pair 0.5 mm2 unarmoured solid annealed bare copper telephone cables including all connected charges for the complete job.

Supplying and fixing of telephone socket RJ-11 with top including GI box making complete connections as required including all connected charges for the complete job

Supplying, installation & testing of 4 pair UTP CAT-6 cable in PVC conduits including all connected charges for the complete job.

Supplying and fixing of telephone 10 pair D.B box with frame, gasket and lock, suitable for Krone type connector including connectors including all connected charges for the complete job.

Supplying and fixing of computer jack socket outlet RJ-45 with top including GI box making complete connection as required including all connected charges for the complete job.

Supplying, fixing & testing of stranded LED recessed lighter (round) with 15 w cool white, 900 lumens luminary alongwith with drop down kamp shade including all connected charges for the complete job.

Supplying,fixing,installation, testing and commissioning of 10-20amp, 10 KA rating single pole C class 240 volts of LEGRAND,HAVELLS or equivalent make including all connected charges for the complete job.

Supplying,fixing,installation, testing and commissioning of 20-32 amp, 10 KA rating double pole C class 240 volts of LEGRAND,HAVELLS or equivalent make including all connected charges for the complete job.

Supply & fixing of 40 ampere, 10 ka rating double pole C class 240 volts in the existing MCB DB box complete testing and commissioning as required including all connected charges for the complete job.

Supplying,fixing,installation, testing and commissioning of 63 amp, 10 KA rating double pole C class 240 volts of LEGRAND,HAVELLS or equivalent make including all connected charges for the complete job.

Supply, installation, testing and commissioning of 8 WAY SINGLE DOOR Distribution Board Panel with copper bus bars and MCB's or DPs flush surface mounted, flat version for fixing of outgoing 63 A DP MCB for incoming service lines of LEGRAND,HAVELLS or equivalent make including all connected charges(the board is to be duly recessed in walls with res-surfacing of walls with cement plaster) for the complete job.

M/S ABDUL AZIZ GANAIE

ADIL BASHIR GILKAR

Showkat Ahmad Dhaar