Replacement of faulty street light cables and providing LED street light fixtures near Anamudi hostel block and Indoor stadium in IISER, Thiruvananthapuram

Amount

Supply, installation, testing and commissioning of pre-wired LED street light with following specificiation, the fixture should be epoxy powder coated pressure diecast aluminium housing with clear diffuser,polycarbonate modular secondary lens optics, THD<10%, PF>=0.95, 5700K pure white, min 4KV surge protection, IP66 protection, conforms to IS 10322 Part 5 complete, including necessary interconnections and earthing as required. (Approved makes: Bajaj /Havells/Philips/Crompton)

lumen level not less than 14400lumens and not more than 120W power.

lumen level not less than 5400lumens and not more than 45W power

Supply and installation of follwing height hot dip galvanised octagonal poles with 130 mm bottom A/F & 70 mm top A/F made up of 3mm thick HR steel sheet along with base plate of size 200X200X12mm thick along with GI singel arm street light mounting bracket, fully galvanised J type foundation bolts on reinforced cement concrete as per the drawing recommended by the pole manufacturer including excavation, refilling, finishing etc. and with 6A DP MCB , 3core x 1.5sqmm flexible PVC copper cable for interconnecting light fixture to the MCB, GI sheet for connecting cable gland, earthing etc as required. Approved make: Bajaj/Crompton/RR ISPAT/Transrail

8 meter

4 meter

Supply of FRLS XLPE power cable of 1.1 kV grade of following size as required. Approved make: Gloster/RR Kabel/Havells/Polycab/ Universal

3C x 2.5 sqmm Copper armoured cable (A2XFY)

2C x 16 sqmm Aluminium armoured cable (A2XFY)

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. Direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

50 mm dia (OD-50 mm & ID-38 mm nominal)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC HUME/ METAL/DWC HDPE pipe as required.

Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size fixing on wall surface as required.

Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct on ground incuding excavation and refilling the trench as required, but excluding sand cushioing and protective covering.

Above 185sqmm upto 400sqmm

Supplying and making end termination with brass compression gland for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1kV grade as required. Approved make: Dowells/jainson/Comet

3core X 2.5 sq. mm

2C x 16 sqmm(22mm)

Supply and installation of weather proof terminal boxes of size 100mm x 100mmx 70mm with IP 66 protection, IK09 with cable connecting terminals, metric knockouts for cable entry and fixing the box on the wall surface complete as required. Make : Syntex/Henzel

Dismantling and re-Installation of solar street light fixture consists of solar PV panel, battery, ABS enclosures, necessary wires along with 5mtr height pole on RCC pole foundation including earth excavation, suitable j bolt,earthing etc complete as required and as directed by Engineer in charge. Note: The pole foundation above the FFL should be nealty cement plastered with fine sand.

AJESH KK (BID ID -3163741)