Electrical General work in Connection with "AMRIT BHARAT STATION SCHEME: - Provision of New Station Building at Jalpaiguri Railway Station."

Provision of New Station Building at Jalpaiguri Railway Station."

Item- 1 Please see item breakup for details.

S No. Item Description of Item Unit Qty Rate Amount

1 1 Supply, wiring, testing & commissioning of FL Numbers 445.00 184.00 81880.00

point/ Lamp point/Fan point (loop wiring) with

angular/ batten holder by FR PVC insulated and

unsheathed single core, 1.5 sq mm

multistranded copper cable to be drawn through

rigid PVC conduit pipe not less than 20 mm dia

medium gauge including bends, joints etc. from

main line under PP shed and 1 sq mm single

core FR PVC insulated and unsheathed copper

wire for earth continuity without controlling

switch under PP shed/FOB as per instruction of

Engineer incharge at site.

KATIHAR DIVISION-ELECTRICAL/N F RLY

2 2 Supply, fixing, connection, testing & Numbers 445.00 4503.00 2003835.00

commissioning of Surface/Suspended mounted

LED Trunking Batten 40 watt, extruded

aluminum housing provided for efficient heat

dissipation with polycarbonate diffuser & Built-In

electronic driver. IP 54, CRI 80, THD(%) 10, CCT.

6500 K Power Factor 0.95, Operating

temperature: -10 C to +50 C, Operating voltage

range: 165 V - 270 V, Average life 50000 hours,

LED lumen efficacy 145 lm/W with a viewing

angle of 120, Powered by built-in electronic

driver (SMPS based constant current supply)

with Output Open/Short-circuit, Thermal fold

back, 440V 8 Hrs protection, Surge protection 4

KV & others safety test as per IS:15885 Part

2/Sec 13. Havells Model No.

ACETRUNKINGADVS40WLED865PSYMBOPCWHT.

3 3 Supply, wiring, testing & commissioning of Numbers 340.00 797.00 270980.00

concealed point wiring by FR PVC insulated and

unsheathed 1.5 sq mm, single core multi strand

copper wire with earth continuity wire by PVC

insulated and unsheathed 1 sq mm , single core

multi strand copper wire concealed on wall

through PVC rigid conduit pipe of dia not less

than 20 mm dia heavy duty including all types

of joints and bends as required, complete with 6

amps flush type controlling modular switch to

be mounted on modular GI inner plate and

modular mounting frame of suitable module as

per requirement complete to be concealed in

wall as per instruction of Engineer Incharge at

site. Existing wall should be cut and re-mended

to original finish by contractor's own material.

(a) FL Point/LED Tube Point/LED Recess Light

Point/Wall Bracket Fan Point/LED Mirror Light

Point/LED Decorative Wall Light Point with

5 5 (c) Fan point with c/rose and 5 step fan Numbers 60.00 1450.00 87000.00

7 7 (e) Plug point 6 amps on board complete Numbers 20.00 361.00 7220.00

8 8 Supply, wiring, testing & commissioning of Numbers 60.00 737.00 44220.00

c o n c e a l e d plug point on separate board

complete with 2 x 6 Amp modular socket and

6/10 amps modular switch to be mounted on

modular GI inner plate 6M and 6M modular

mounting frame with GI box to be concealed in

wall as per instruction of Engineer Incharge at

site. Existing wall should be cut and re-mended

to original finish by contractor's own material.

9 9 Supply, wiring, testing & commissioning of Numbers 60.00 855.00 51300.00

concealed 6/16 amps power plug point on

separate board complete with modular 16 amps

switch (with indicator) and 6/16 amps 3 pin

combined shuttered socket to be mounted on

modular GI inner plate 4M or suitable size with

modular mounting frame to be concealed in wall

as per instruction of Engineer Incharge at Site.

10 10 Supply, wiring, testing & commissioning of Numbers 15.00 1598.00 23970.00

concealed computer point on separate board

complete with 4 nos. 6 amps modular switch

and 4 nos. 6 amps 5 pin shuttered modular

socket to be mounted on modular GI inner plate

12M and 12M modular mounting

frame/combined plate to be concealed in wall as

per instruction of Engineer Incharge at Site.

KATIHAR DIVISION-ELECTRICAL/N F RLY

11 11 Supply, fixing, connection & testing of 40 Watt Numbers 168.00 1890.00 317520.00

LED Tubelight, Surface/ Pendent mounting LED

Battens in Extruded aluminium housing as per

instruction of Engineer Incharge at Site.

12 12 Supply, installation, testing & commissioning of Numbers 100.00 2303.00 230300.00

Surface/Recessed LED luminaire with slim line

CRCA sheet metal body, square type, (System

wattage-18 Watt, Nominal system efficacy 120

lm/watt) suitable for 600 x 600 mm modular

ceiling as per instruction of Engineer incharge

13 13 Supply and testing of wall mounted bracket fan Numbers 20.00 1998.00 39960.00

400 mm sweep complete with all accessories to

be fixed on wall by suitable fixing arrangement

including connection by 2 core, 1.5 sqmm PVC

insulated and FR PVC Round Sheathed, Copper

Conductor (flexible) industrial cable as per

instruction of Engineer Incharge at Site.

14 14 Supply, fixing, connection, testing & Numbers 12.00 1336.00 16032.00

commissioning of surface mounting sleek LED

mirror light 5 W or 7 W, IP 20, 1 ft version

powder coated CRCA housing, high output

diffuser including suitable fixing arrangement on

surface as per instruction of Engineer incharge

15 15 Supply and fixing of Wall mount Decorative light Numbers 40.00 2439.00 97560.00

fitting with 1 x 7 Watt LED lamp, E27 (Jaguar

JNL-CHR-WLSL55004E27 or similar), Heritage

type as per instruction of Engineer Incharge at

16 16 Supply, fixing & testing and commissioning of Numbers 10.00 670.00 6700.00

LED 12 W B22 CDL INVERTER BULB V2 as per

instruction of Engineer Incharge at Site.

17 17 Fixing, testing & commissioning of ceiling fan Numbers 60.00 46.00 2760.00

with supply & fixing of MS clamp with hook, nut,

bolt, washer etc. as per instruction of Engineer

incharge at site. (Fan will be supplied by

18 18 Supply, installation, testing & commissioning of Numbers 10.00 2824.00 28240.00

300 mm sweep (metallic) heavy duty exhaust

fan, 1400 RPM complete with fixing on wall by

suitable size bolts & nuts grouted on wall as per

instruction of Engineer incharge at site.

19 19 Supply, installation, testing & commissioning of Numbers 10.00 1292.00 12920.00

250 mm Sweep (PVC/Plastic Body) Exhaust Fan

complete with suitable size, bolts & nuts

grouted on wall as per instruction of Engineer

Incharge at Site.

20 20 Supply, wiring & testing of main wire by 2.5 sq Metre 6000.00 75.00 450000.00

mm, Single Core FR-LSH PVC Insulated Industrial

Grade Copper Conductor (Unsheathed) Flexible

Cables, 1100 Volts and earth continuity wire by

1.0 sq mm FR-LSH PVC Insulated Industrial

Grade Copper Conductor Conforming to IS: 694

concealed in wall through PVC rigid conduit pipe

not less than 20 mm dia as per instruction of

Engineer incharge at site.

21 21 Supply, wiring & testing of main wire by 4 sq Metre 6000.00 87.00 522000.00

mm, Single Core FR-LSH PVC Insulated Industrial

Grade Copper Conductor (Unsheathed) Flexible

Cables, 1100 Volts and earth continuity wire by

1.0 sq mm FR-LSH PVC Insulated Industrial

Grade Copper Conductor Conforming to IS: 694

concealed in wall through PVC rigid conduit pipe

not less than 20 mm dia as per instruction of

Engineer incharge at site.

KATIHAR DIVISION-ELECTRICAL/N F RLY

22 22 Supply, wiring & testing of main wire by 6 sq Metre 4000.00 100.00 400000.00

mm, Single Core FR-LSH PVC Insulated Industrial

Grade Copper Conductor (Unsheathed) Flexible

Cables, 1100 Volts and earth continuity wire by

1.0 sq mm FR-LSH PVC Insulated Industrial

Grade Copper Conductor Conforming to IS: 694

through PVC rigid conduit pipe/polythene pipe

not less than 20 mm dia as per instruction of

Engineer incharge at site.

23 23 Supply, installation, testing & commissioning of Numbers 15.00 4200.00 63000.00

ILLUMINA PENDANT 1LS E27 MATT GLD Ceiling

Light with an elegant oval-shaped fixture with a

matte gold finish designed to illuminate from it's

center perfectly pairing with Dazzle Shine lamp

as per instruction of Engineer Incharge at Site.

24 24 Supply, fixing & testing of hanging type Mini Numbers 2.00 23882.00 47764.00

Chandelier, Colour-Gold with 5 watt LED Lamp

as per instruction of Engineer Incharge at Site.

25 25 Supply, installation, testing & commissioning of Numbers 30.00 16193.00 485790.00

LED Luminaire Flood Light, Flame Proof 250

watts complete with pressure die cast

aluminium housing, IP 66, Luminous efficacy

120 lm/watt with heat sink feature, surge

protection etc including wire connection as per

instruction of Engineer incharge at site.

26 26 Supply, installation, testing & commissioning of Numbers 26.00 1193.00 31018.00

modular power unit complete with 32 Amp mini

MCB DP "C" series 3kA , 25 amps starter, 25

Amp Socket and 25 Amp plug to be mounted on

6 module GI box, 6 module combined plate

concealed on wall and wiring by 6 sq mm, Single

Core FR-LSH PVC Insulated Industrial Grade

Copper Conductor (Unsheathed) Flexible Cables,

1100 Volts with earth coninuity wire by 1 sq mm

copper cable Conforming to IS: 694 to be drawn

through Rigid PVC conduit pipe not less than 20

mm dia as per instruction of Engineer incharge

at site. (For AC & Geyser)

27 27 Supply, installation, testing & commissioning of Numbers 20.00 54091.00 1081820.00

Inverter Split Air Conditioners 1.5 Ton, (BEE star

rating-5 star, Coil material-Copper, Echo-friendly

refrigerant, Nominal cooling capacity in Ton /

(kcal/hr)-1.5 Ton / 4500 kcal/hr) with all

accessories as per OEM suitable for operation

on 230V AC ,single phase, 50 Hz as per

instruction of Engineer incharge at site. Re-

mending work should be done after installation

of RAC. (with 1 pair outdoor wall stand)

(Industrial AC/Heavyduty AC)

28 28 Supply, installation, testing & commissioning of Numbers 6.00 11309.00 67854.00

Stationary storage type electric water heater

(Geyser), Digital display, Type:-Vertical,

Capacity (Ltrs):25, Power input: 2000 watt,

Class:-I, Star Rating: 5 Star suitable for

operation on 230 Volts, single phase AC, 50 Hz.

Storage electric water heater shall be complete

in all respect with fittings as per general

technical requirements and as per instruction of

Engineer incharge at site.

KATIHAR DIVISION-ELECTRICAL/N F RLY

29 29 "Supply, installation, testing & commissioning of Numbers 4.00 100011.00 400044.00

Aquaguard Institutional Water cooler-cum-

Purifier with Storage Capacity 120 Ltrs. & Option

for Cold & Normal Purified Water. a) Approx.

Dimensions : 750 mm (W) x 570 mm (D) x 1350

mm (H) b) Power rating : 850 ± 10% watt c)

Water flow capacity : 80 LPH d)Operating power

supply : 170-260 VAC, 1 ph e)No. of stages for

filter-cum-purifier : 3 nos. f) Storage capacity :

120 Ltr g) Nos. of Faucets : 03 nos. h) Body

material: Front SS 304 and the rest in Pre-

coated steel i) Refrigerant used: Freon 22 or

30 30 Supply,installation, testing & commissioning of Numbers 10.00 3490.00 34900.00

insect killer of dimension (L - 26 inch X W - 4.5

inch x H - 11 inch) having coverage area 550 ft

with 02 nos tube of power consumption 60 watt

as per instruction of Engineer incharge at site. It

should be fixed with necessary clamping.

31 31 Supply, installation, testing & commissioning of Numbers 10.00 59202.00 592020.00

Pure Sine Wave 2400 VA Inverter with

Integrated 2560 WH LiFePO4 Lithium-Ion

Battery as per instruction of Engineer Incharge

32 32 Supply, installation, testing & commissioning of Set 2.00 229608.00 459216.00

Power One' make 3 KVA true online UPS system,

1 Phase input & 1 Phase output with Exide /

Amara Raja make SMF batteries of 12V, 150 AH

x 8 Nos. (Total: 14400 VAH) to provide 4-6 Hrs.

backup along with suitable Battery Rack &

battery interlink as per instruction of Engineer

Incharge at Site.

33 33 Supply, installation, commissioning & testing of Square 180.00 1772.00 318960.00

LED indication station name board (Length of Foot

board will be as per proportion of letter so that

all the 4 side of the board will have extra space)

with channel letters with 3.75 ft. in lenght with

suitable widen and 4 mm projection size which

inside ACP board (Brand- ALUDECOR, category-

AL 33 series exterior & thikness-3 mm) with

acrylic face on front and having Sumsung 5630

LED's (Shape- Lens type, operating voltage- 12

V DC, carring current-80 mA, power Dissipation-

0.96 watt, working hours-50000, case material-

ABS ,protection-IP68) inside for illumination

letters in English, Hindi, Bengali or regional

language complete with all materials including

provision of erection structure made of MS

angle/channel/flat duly painted with aluminium

paint over a coat of red oxide primer with CC

foundation (1:3:6) of cement, sand and stone

chips as required at site and as per instruction

of Egnineer incharge at site.

KATIHAR DIVISION-ELECTRICAL/N F RLY

34 34 Design, manufacture, display of wall /hanging / Square 120.00 2868.00 344160.00

floor mounting type LED illuminated sign / Foot

direction boards in half elliptical shape. The

display sheet shall be of unbreakable 040

translucent polycarbonate sheet of 2 mm

thickness. The text / graphics matter visibility

shall not be less than 160 deg. The approved

colour text and graphics shall be printed / router

cut on monomeric calendered vinyl of 70 mm

thickness and shall be firmly pasted on display

sheets. The mounting arrangement shall be

hanging, wall mounting, ceiling mounting, pole

mounting or floor mounting and as per site

requirement. The signage shall have the integral

mounting arrangements with sturdy structural

frame and ACP cladding on the back side of the

signage to avoid rusting and entry of dust. The

LED board shall have uniform illumination with

4-8 W / sq. ft and with brightness more than

ambient light. Suitable size end cap of 1.5 mm

thick SS 304 should be provided. (Signage

Board should as per Railway Board Letter No.

35 35 Erection and installation of wall / hanging / floor Square 120.00 287.00 34440.00

mounting type LED illuminated sign / direction Foot

boards in half elliptical shape. The display sheet

shall be of unbreakable 040 translucent

polycarbonate sheet of 2 mm thickness. The

text/graphics matter visibility shall not be less

than 160 deg. The approved colour text and

graphics shall be printed / router cut on

monomeric calendered vinyl of 70 mm thickness

and shall be firmly pasted on display sheets.

The mounting arrangement shall be hanging,

wall mounting, ceiling mounting, pole mounting

or floor mounting and as per site requirement.

The signage shall have the integral mounting

arrangements with sturdy structural frame and

ACP cladding on the back side of the signage to

avoid rusting and entry of dust. The LED board

shall have uniform illumination with 4-8 W / sq.

ft and with brightness more than ambient light.

Suitable size end cap of 1.5 mm thick SS 304

should be provided. (Signage Board should as

per Railway Board Letter No. 2023/SD-

36 36 Supply, installation, testing & commissioning of Numbers 6.00 13091.00 78546.00

swaged type GI tubular pole 9 mt long conforms

to IS - 2713/1980 with following technical

specification and complete with base plate and

cap: - a) Length of section : - Bottom - 5 mt,

Middle - 2 mt, Top - 2 mt b) Outside diameter

and thickness of section : - Bottom - 114.3 x

4.50 mm, Middle - 88.9 x 4.05 mm , Top - 76.1 x

37 37 Supply & testing of GI octagonal pole 6 mt long Numbers 30.00 14193.00 425790.00

with foundation bolt, loop box of bakelite sheet

with one 6A SP MCB and 16 sq mm stud type

connector etc. The octagonal pole shall be hot

dip galvanized in single dip. Technical

specification of pole as following:- Height - 6 mt

Top dia (A/F) - 70 mm Bottom dia (A/F) - 130

mm Sheet thickness - 3 mm Base plate (L x B x

T) - (200 x 200 x 12) mm Foundation Bolt size

(no.x dia) - 4 x 20 dia mm Pitch Circle Dia (PCD)

- 200 mm Bolt length - 600 mm Projected Bolt

Length - 100 mm .

38 38 Supply & fixing of 1 mtr GI Single arm bracket Numbers 30.00 1615.00 48450.00

(header) and holder with Nut & bolt as per

instruction of Engineer incharge at site.

KATIHAR DIVISION-ELECTRICAL/N F RLY

39 39 Erection of Rail/Tubular/Octagonal pole to 1/5 th Numbers 36.00 1712.00 61632.00

of its height with CC foundation from base block

(30 cm x 30 cm x 15 cm) including digging &

refilling of earth to a height of 30 cm above

ground level as per drawing

no.CEE/OH@47'40@FGA) in ratio 1:3:6 by

cement sand & Chips 19 mm & down including

excavation of earth.

40 40 Supply, installation, testing & commissioning of Numbers 30.00 14159.00 424770.00

150 Watt LED Street Light made up of pressure

die cast aluminium housing with high efficiency

LEDs as lighting source and lens embedded PC

cover having TOP Opening seperate driver

compartment with IP66 protection and impact

resistance of IK08. as per instruction of Engineer

incharge at site.

41 41 Supply, installation, testing & commissioning of Metre 100.00 1561.00 156100.00

Hot Dipped Galvanized Wire Mesh Cable Tray of

size (Depth- 54 x Width- 150) mm, made of

carbon steel (ASTM A510, Grade-1008 specified)

finished by electrozinc plating (ASTM B 633

specified) alongwith all accessories like suitable

type of splices, locking tab, divider coupler,

preclick, SWK, clamp, Tee, bend, bracket, nut,

bolts etc. Trays should comply standard EN ISO

1461: atleast 550 h of SST. Assemblies with

specific fire resistant properties must have an

E30-E90 certificate. Rod-dia must be from 3.9

mm to 5.9 mm or higher and as per site site

requirement and as per instruction of engineer

incharge at site.

42 42 Supply, installing, testing & commissioning of Numbers 1.00 404250.00 404250.00

High Volume Low Speed (HVLS) FAN, 3 Phase,

1.2 KW, 20 ft. Diameter, 6 (Six) Blade with

Control Panel and all acessories as per

Instruction of Engineer Incharge at Site.

43 43 Supply & execution of transformer bed by CC cum 24.00 4433.00 106392.00

foundation (1:3:6) of size (3.0 m x 2.0 m x 2.0

m) including plastering by morter ratio (1:4)

including digging of soil/surface as per

instruction of Engineer incharge at site. (For

installation of transformer)

44 44 Supply, erection, testing & commissioning of 11 Set 4.00 5174.00 20696.00

kV lightning arrestor polymer type with all

accessories. Lighting arrestor must conform to

IEC-60099-4 IS: 3070 (Part-III) (3 no in a set) as

per instruction of Engineer incharge at site.

45 45 Supply, erection, testing & commissioning of 11 Numbers 4.00 11314.00 45256.00

kV, 200 amps, 3 Pole vertical type Gang

Operated Air Break switch TILTING type

complete with square shaft, operating pipe,

handle, guide clamp etc ( 3 no in a set) as per

instruction of Engineer incharge at site.

46 46 Horizontal machine boring of 300 mm dia hole Metre 100.00 2538.00 253800.00

across track/Road/High drain etc. at a depth of

1.0 mtr below of ground level with suitable

boring instruments & neessary arrangement

and as per technical procedure.

47 47 Supply, laying, commissioning & testing of CI Metre 120.00 877.00 105240.00

Pipe 100 mm dia Class LA type (IS 1536-2001)

to be laid partly along the pole and partly

through ground under railway track/road in

cable trench for protection of cable with suitable

fixing arrangement by MS clamp,

nut,bolt,washer etc.as per instruction of

Engineer incharge at site.

KATIHAR DIVISION-ELECTRICAL/N F RLY

48 48 Supply, laying, commissioning & testing of HDPE Metre 500.00 383.00 191500.00

pipe 110 mm dia PN-6 grade conforming IS

4984/1995 or latest to to be laid partly along the

p o l e with suitable fixing arrangement by MS

clamp made of MS flat of size 50x6 mm and

suitable size nut, bolt, washer as per instruction

of Engineer incharge at site.

49 49 Supply, laying, commissioning & testing of HDPE Metre 500.00 70.00 35000.00

pipe 50 mm dia, PN-6 grade to be laid partly

along the p o l e / w a l l with suitable fixing

arrangement by MS clamp made of MS flat of

size 50x6 mm and suitable size nut, bolt,

washer etc as per instruction of Engineer

Incharge at site.

50 50 Supply, fixing, testing & commissioning of IP Numbers 2.00 10035.00 20070.00

66/67 thermoplastic cable junction box / loop

box of size (300 x 450 x 170) mm with

knockouts & 04 nos terminals as per instruction

of Engineer Incharge at Site.

51 51 Supply, fixing, testing & commissioning of IP Numbers 16.00 5291.00 84656.00

66/67 thermoplastic cable junction box / loop

box of size (210 x 310 x 116) mm with

knockouts & 04 nos terminals as per instruction

of Engineer incharge at site.

52 52 Supply & Erection of earth by 50 mm dia 3 Mtrs. Numbers 20.00 4349.00 86980.00

long (3.6 mm thickness) GI pipe, 32x6 mm GI

strip- 5 Mtrs, GI nuts, bolts including masonry

materials for earthing pit, salt, charcoal,

soldered end terminal etc. and construction of

earth pit covered with RCC cover slab12.7 mm

thickness and watering pipe as per Drg. No.-

PCEE/ELG/DRG/2024/1 Date:- 30.09.2024 and as

per instruction of Engineer Incharge at site.

53 53 (a) Supply, installation, testing & commissioning Set 8.00 12330.00 98640.00

of 4 way VTPN MCCB DB (MCCB+12 modules)

with IP 43 grade protection, metal door with

wire sets, busbar, earth bar, blanking plates,

cable ties etc with supply and fixing of following

MCCB/MCB as per instruction of Engineer

incharge at site.

Conforms to IS/IEC 60898 - 1:2002

56 56 (a) Supply, installation, testing & commissioning Set 8.00 2005.00 16040.00

of 12 way SPN Distribution Board, Flush/Surface

mounting, IP 43 grade protection with copper

bus bar, fully shrouded neutral bar, earth bar,

cable ties, metal double door as per IS 8623 - III

with supply and fixing of following RCBO/MCB's

as per instruction of Engineer Incharge at Site.

Conforms to IS/IEC 60898 - 1:2002

Conforms to IS/IEC 60898 - 1:2002

KATIHAR DIVISION-ELECTRICAL/N F RLY

59 59 (a) Supply, fabrication, erection, testing, Set 1.00 32916.00 32916.00

commissioning & painting of floor mounted

powder coated cubicle panel board (Modular

look) of suitable size (neither big nor small) ),

outdoor type with double door made of suitable

size MS/GI angle 50 x 50 x 6 mm, MS/GI flat 50 x

6 mm, 14 SWG MS sheet/Powder coated CRCA

sheet with provision of weather proof,rust

proof,dust proof,water proof having internal

rubber gasket with supply and fixing of following

ACB/MCCB/Bus bar/Meter etc. (Connections to

be made by copper strips, glands should be

provided at cable entry and exit, components

should be compartmentalized, Each

compartment will be provided with the door and

pad locking arrangement. The compartment

illumination lamp with door operated switch

shall be provided for each compartment. Panel

board drawing approval must be obtained with

clear indication of make of items of

electrolytic grade copper consisting of 4 bars ( 3

Ph and Neutral ) ( Bus bar should have

insulation cover)

64 64 (f) Digital voltmeter (0-500) amps and Digital Set 1.00 5581.00 5581.00

ammeter (0-500) amps with s/switch and CTs

66 66 (h) Supply, installation and testing of Astro Set 1.00 9777.00 9777.00

(Analog) time switch with 3 pole 63 amp

contractor and suitable thermoplastic box and

fitted on mounting plate/DIN rail.

67 67 Supply, laying & testing of 3 core, 2.5 sq mm Metre 500.00 147.00 73500.00

PVC insulated and FR PVC Round Sheathed,

Copper Conductor (flexible) industrial cable,

1100 Volt, conforming to IS 694 as per

instruction of Engineer Incharge at Site.

68 68 Supply, drawing, commissioning & testing of 3 Metre 500.00 179.00 89500.00

core, 4 sq mm PVC insulated and FR PVC Round

Sheathed, Copper Conductor (flexible) industrial

cable, 1100 Volts, conforming to IS: 694 as per

instruction of Engineer incharge at site.

insulated and FR PVC Round Sheathed, Copper

Conductor (flexible) industrial cable, 1100 Volt,

conforming to IS 694 as per instruction of

Engineer Incharge at Site.

70 70 Laying, commissioning & testing of HT/LT Metre 3500.00 55.00 192500.00

XLPE/PVC cable of different sizes partly along

the pole and partly through ground in cable

trench by excavation of ground below 1.5 mt

from ground level with suitable fixing

arrangement by MS clamp of size 50x6 mm and

suitable size nut, bolt. Loading, Unloading &

Carrying of cable to actual work site by

contractor's own arrangement. (Aluminium

Crimping Socket should be provided for each

Cable Termination). (Cable will be supplied by

KATIHAR DIVISION-ELECTRICAL/N F RLY

71 71 Excavation of cable trench (0.3 x 1.5) mtr below Metre 1530.00 148.00 226440.00

ground level for laying of cable & refilling the

soil after digging the earth as per instruction of

Engineer incharge at site. Cable should be laid

on bedding of height 75 mm sand at the bottom

of trench, and covering it with additional sand of

height 75 mm and thereafter protecing it by

mean of bricks before refilling the soil as per IS

72 72 Supply, erection, testing & commissioning of HT Set 7.00 23700.00 165900.00

11 kV (E) cable termination Kit out door, heat

shrinkable type for 3 core, 120-185 sq mm XLPE

insulated PVC armoured cable complete with

jointing materials as per instruction of Engineer

Incharge at Site.