REPAIR TO WOODEN FURNITURE AT MILITARY STATION KOTA

Amount

Chair dining FD 16, 203, 228, 279 Removing of old unserviceable following parts from chair dining and supply & fixing new parts made of first class hard wood (Teak wood) duly finished with existing shape and fixed with bamboo pin and fevicol including tightening of other joints and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings: -

(a) Front leg (Left or Right)

(b) Rear leg (Left or Right)

(c) Front/back/right/left side rail with holes for canning

(d) Stiffner bottom (side/centre)

(e) Back rest

(f) Removing of old unserviceable/broken shoe from chair dining and S&F new hard PVC shoe of superior quality, fixed with screw, complete all as specified, directed and shown on drawings.

(g) Applying french polishing including cleaning and preparing the surface with one or more coats to entire exposed wooden surfaces of repaired chair dining (new and old parts), complete all as specified and directed.

(h) Recaning of repaired chair dining with best quality of approved plastic cane of white or cream ivory shade, 2 mm wide and 0.4 mm thick, complete all as specified, directed and shown on drawings.

Chair Writing FD - 20, 202, 250, 280 Removing of old unserviceable following parts from chair writing and supply & fixing new parts made of first class hard wood (Teak wood) duly finished with existing shape and fixed with bamboo pin and fevicol including tightening of other joints, and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings: -

(a) Front leg (Left or Right) required as per drg.

(b) Rear leg (Left or Right) required as per drg.

(c) Front/back/right/left side rail with holes for canning

(d) Stiffner bottom (side/centre)

(e) Back rest

(f) Hand rest

(g) Removing of old unserviceable/broken shoe from chair writing and S&F new hard PVC shoe of superior quality, fixed with screw, complete all as specified, directed and shown on drawings.

(h) Applying french polishing including cleaning and preparing the surface with one or more coats to entire exposed wooden surfaces of repaired chair writing (new and old parts), complete all as specified and directed.

(j) Recaning of repaired chair writing with best quality of approved plastic cane of white or cream ivory shade, 2 mm wide and 0.4 mm thick, complete all as specified, directed and shown on drawings.

Chair Easy FD - 17, 201, 229 Removing of old unserviceable following parts from chair easy and supply & fixing new parts made of first class hard wood (Teak wood) duly finished with existing shape and fixed with bamboo pin and fevicol including tightening of other joints, and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings: -

(a) Front leg (Left or Right) required as per drg.

(b) Rear leg (Left or Right) required as per drg.

(c) Front/back/right/left side rail with holes for canning

(e) Back rail (Top/bottom/left/right) of back frame with holes for canning as per drg

(f) Stiffner bottom

(g) Hand rest

(j) Removing of old unserviceable/broken shoe from chair easy and S&F new hard PVC shoe of superior quality, fixed with screw, complete all as specified, directed and shown on drawings.

(k) Applying french polishing including cleaning and preparing the surface with one or more coats to entire exposed wooden surfaces of repaired chair easy (new and old parts), complete all as specified and directed.

(l) Recaning of repaired chair easy with best quality of approved plastic cane of white or cream ivory shade, 2 mm wide and 0.4 mm thick, complete all as specified, directed and shown on drawings.

Table centre FD-29, 235, 274 Removing of old unserviceable following parts from table centre and supply & fixing new parts made of first class hard wood (Teak wood) duly finished with existing shape and fixed with bamboo pin and fevicol including tightening of other joints, and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings: -

(a) Front or back rail required as per drg

(b) Side rail (Left or Right) required as per drg

(c) Leg required as per drg

(d) Stiffener required as per drg

(e) Removing of old unserviceable/broken shoe from table centre and S&F new hard PVC shoe of superior quality, fixed with screw, complete all as specified, directed and shown on drawings.

(f) Removing of unserviceable/ broken top from table centre and supply & fixing new top made of 17/18 mm thick prelaminated MDF board, exterior grade, ISI marked, duly fixed with 4 mm thick first class hard wood (teak wood) beading allround the top, complete all as specified, directed and shown on drawings.

(g) Applying french polishing including cleaning and preparing the surface with one or more coats to entire exposed wooden surfaces of repaired table centre (new and old parts), complete all as specified and directed.

Teapoy FD - 34, 232, 278 & 382 Removing of old unserviceable following parts from teapoy FD and supply & fixing new parts made of first class hard wood (Teak wood) duly finished with existing shape and fixed with bamboo pin and fevicol including tightening of other joints, and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings: -

(a) Leg of teapoy FD required as per drg

(b) Front or back rail required as per drg

(c) Side (Left or right) rail required as per drg

(d) Stiffener (side or centre) required as per drg

(e) Removing of old unserviceable/broken shoe from teapoy FD and S&F new hard PVC shoe of superior quality, fixed with screw, complete all as specified, directed and shown on drawings.

(f) Removing of unserviceable/ broken top from teapoy FD and supply & fixing new top made of 17/18 mm thick prelaminated MDF board, exterior grade, ISI marked, duly fixed with 4 mm thick first class hard wood (teak wood) beading allround the top, complete all as specified, directed and shown on drawings.

(g) Applying french polishing including cleaning and preparing the surface with one or more coats to entire exposed wooden surfaces of repaired teapoy FD (new and old parts), complete all as specified and directed.

Table Peg FD- 25, 236, 266, 277, 384 Removing of old unserviceable following parts from table peg and supply & fixing new parts made of first class hard wood (Teak wood) duly finished with existing shape and fixed with bamboo pin and fevicol including tightening of other joints, and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings: -

(a) Front or back rail of table peg required as per drg

(b) Side rail ( Left or Right) required as per drg

(c) Leg required as per drg

(d) Stiffener bottom (side/centre) required as per drg

(e) Removing of old unserviceable/broken shoe from table peg and S&F new hard PVC shoe of superior quality, fixed with screw, complete all as specified, directed and shown on drawings.

(f) Removing of unserviceable/ broken top from table peg and supply & fixing new top made of 17/18 mm thick prelaminated MDF board, exterior grade, ISI marked, duly fixed with 4 mm thick first class hard wood (teak wood) beading allround the top, complete all as specified, directed and shown on drawings.

(g) Applying french polishing including cleaning and preparing the surface with one or more coats to entire exposed wooden surfaces of repaired table peg (new and old parts), complete all as specified and directed.

Table 3' x 2' with or without drawer FD-41, 224, 283, 42, 209, 223, 231, 284 Removing of old unserviceable following parts from table 3'x2' and supply & fixing new parts made of first class hard wood (Teak wood) duly finished with existing shape and fixed with bamboo pin and fevicol including tightening of other joints, and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings: -

(a) Front or back rail required as per drg

(b) Side rail (Left or Right) required as per drg

(c) Leg required as per drg

(d) Stiffener (side/centre) required as per drg

(e) New drawer as per drg

(f) Removing of old unserviceable/broken shoe from table 3'x2' and S&F new hard PVC shoe of superior quality, fixed with screw, complete all as specified, directed and shown on drawings.

(g) Removing of unserviceable/ broken top from table 3'x2' and supply & fixing new top made of 17/18 mm thick prelaminated MDF board, exterior grade, ISI marked, duly fixed with 4 mm thick first class hard wood (teak wood) beading allround the top, complete all as specified, directed and shown on drawings.

(h) Applying french polishing including cleaning and preparing the surface with one or more coats to entire exposed wooden surfaces of repaired table 3'x2' (new and old parts), complete all as specified and directed.

Table dining 6 Persons FD- 273, 376 Removing of old unserviceable following parts from table dining 06 pers and supply & fixing new parts made of first class hard wood (Teak wood) duly finished with existing shape and fixed with bamboo pin and fevicol including tightening of other joints, and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings: -

(a) Front or back rail required as per drg

(b) Side rail (Left or Right) required as per drg

(c) Leg for table dining 06 pers required as per drg

(d) Stiffener (bottom support of table top) required as per drg

(e) Wooden cleat sitffener required as per drg

(f) Removing of old unserviceable/broken shoe from table dining 6 pers and S&F new hard PVC shoe of superior quality, fixed with screw, complete all as specified, directed and shown on drawings.

(g) Removing of unserviceable/ broken top from table dining 6 pers and supply & fixing new top made of 17/18 mm thick prelaminated MDF board, exterior grade, ISI marked, duly fixed with 4 mm thick first class hard wood (teak wood) beading allround the top, complete all as specified, directed and shown on drawings.

(h) Applying french polishing including cleaning and preparing the surface with one or more coats to entire exposed wooden surfaces of repaired table dining 6 pers (new and old parts), complete all as specified and directed.

Table dining 8 Persons FD- 273, 376 Removing of old unserviceable following parts from table dining 08 pers and supply & fixing new parts made of first class hard wood (Teak wood) duly finished with existing shape and fixed with bamboo pin and fevicol including tightening of other joints, and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings: -

(a) Front or back rail required as per drg

(b) Side rail (Left or Right) required as per drg

(c) Leg for table dining 08 pers required as per drg

(d) Stiffener (bottom support of table top) required as per drg

(e) Wooden corner (cleat) required as per drg

(f) Removing of old unserviceable/broken shoe from table dining 8 pers and S&F new hard PVC shoe of superior quality, fixed with screw, complete all as specified, directed and shown on drawings.

(g) Removing of unserviceable/ broken top from table dining 8 pers and supply & fixing new top made of 17/18 mm thick prelaminated MDF board, exterior grade, ISI marked, duly fixed with 4 mm thick first class hard wood (teak wood) beading allround the top, complete all as specified, directed and shown on drawings.

(h) Applying french polishing including cleaning and preparing the surface with one or more coats to entire exposed wooden surfaces of repaired table dining 8 pers (new and old parts), complete all as specified and directed.

Table writing FD-33, 249, 275 Removing of old unserviceable following parts from table writing and supply & fixing new parts made of first class hard wood (Teak wood) duly finished with existing shape and fixed with bamboo pin and fevicol including tightening of other joints, and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings: -

(a) Leg (Left / right side) required as per drg

(b) Long rail required as per drg

(c) Short rail required as per drg

(d) Side stiffener required as per drg

(e) Centre stiffener required as per drg

(f) Replacement ply 6 mm thick commercial for box of the table writing required as per drg .

(g) Replacement of left/ right side of box of table made of 17/18 mm thick prelaminated MDF board, both side natural teak shade including 4 mm thick teak wood beading, complete all as specified, directed and shown on drawings.

(h) Replacement of shutter of table writing using 17/18 mm thck prelaminated MDF board, required as per drg including continuous piano hinge, knob and 4 lever brass mortise lock.

(j) Replacement of drawer of table writing required as per drg

(k) Removing of old unserviceable/broken shoe from table writing and S&F new hard PVC shoe of superior quality, fixed with screw, complete all as specified, directed and shown on drawings.

(l) Removing of unserviceable/ broken top from table writing and supply & fixing new top made of 17/18 mm thick prelaminated MDF board, exterior grade, ISI marked, duly fixed with 4 mm thick first class hard wood (teak wood) beading allround the top, complete all as specified, directed and shown on drawings.

(m) Applying french polishing including cleaning and preparing the surface with one or more coats to entire exposed wooden surfaces of repaired table writing (new and old parts), complete all as specified and directed.

Side board FD-26, 241, 371

(a) Removing of old unserviceable broken shutter from side board and supply and fix new shutter made of 17/18 mm thick prelaminated MDF board including 4 mm thick first class hard wood teak wood beading alround the shutter and fixing in position with MS piano hinges of suitable flap width and providing one No. anodised aluminium knob, complete all as specified, directed and shown on drawings.

(b) Removing of old unserviceable Left or right side and S&F new prelaminated MDF board 17/18 mm thick and fixing in position, complete all as specified, directed and shown on drawings.

(c) Removing of old unserviceable bottom of side board and S&F new prelaminated MDF board 17/18 mm thick and fixing in position, complete all as specified, directed and shown on drawings.

(d) Removing of old unserviceable shelf of side board and S&F new prelaminated MDF board 17/18 mm thick and fixing in position, complete all as specified, directed and shown on drawings.

(e) Removing old unserviceable back ply from side board S&F back ply of 6mm thick both side commercial, ISI marked and fixing in position, complete all as specified, directed and shown on drawings.

(f) Removing old unserviceable leg and batten of side board S&F New leg and batten of 1st class Hardwood (Teak wood) and fixing in position with screw / Nails all as showsn on drg and a directed.

(g) Removing old unserviceable / broken knob from side board and S&F New aluminium anodised knob of 38 to 40mm dia and fixed with machine made screws, complete all as specified, directed and shown on drawings.

(h) Removing old unserviceable drawer from side board and S&F New drawer in position, complete all as specified, directed and shown on drawings.

(j) Removing of unserviceable/broken top from side board and supply & fixing new top made of 17/18 mm thick prelaminated particle board duly fixed with 4 mm thick first class hard wood (teak wood) beading alround the top, complete all as specified, directed and shown on drawings.

(k) Applying french polishing including cleaning and preparing the surface with one or more coats to entire exposed wooden surfaces of repaired side board (new and old parts), complete all as specified and directed.

Table Bed Side FD-28, 210, 248, 276

(a) Removing of existing unserviceable side (left or right) of Table Bed Side and providing new side made of 17/18 mm thick prelaminated MDF Board including 4 mm thick teak wood beading on front sides, rest all as specified, directed and shown on drawings.

(b) Removing of existing unserviceable top of Table Bed Side and providing new top of 17/18 mm thick prelaminated MDF Board including providing 4 mm thick teak wood beading on front side, rest all as specified, directed and shown on drawings.

(c) Removing of existing unserviceable shelf of Table Bed Side and providing new shelf made of 17/18 mm thick prelaminated MDF Board including providing 4 mm thick teak wood beading on front side, rest all as specified, directed and shown on drawings.

(d) Removing of existing unserviceable back of Table Bed Side and providing new back made of 6mm thick commercial face plywood, fixed with headless nails in existing position, complete all as specified, directed and shown on drawings.

(e) Applying french polishing including cleaning and preparing the surface with one or more coats to entire exposed wooden surfaces of repaired table bed side (new and old parts), complete all as specified and directed.

SOFA SET 4/ 5 PERSON WITH CUSHION FD-281, 373

(a) Removing the existing unserviceable cushion of sofa set 4/5 seater and replacing with new foam cushion (40 Kg/Cum density) of size 560mm x 530mm x 100mm duly covered with new tapestry cloth including mulmul cloth and chain in one side, complete all as specified, directed and shown on drawings. Note :- The tapastry cloth shall not be less than Rs. 400/- per metre and of design/pattern as approved by the Engineer in Charge.

(b) Removing the existing unserviceable front leg from Sofa and providing new first class hard wood (Teak) leg of size 70mm x 35 mm x 300mm, complete all as specified, directed and shown on drawings.

(c) Removing the existing unserviceable rear leg from Sofa and providing new first class hard wood (Teak) leg of size 70mm x 35 mm x 300mm, complete all as specified, directed and shown on drawings.

(d) Removing the existing unserviceable arm rest from Sofa and providing new first class hard wood (Teak) arm rest of size 35mm x 70 mm x 725mm, complete all as specified, directed and shown on drawings.

(e) Removing the existing unserviceable side rail from Sofa and providing new first class hard wood (Teak) side rail of size 35mm x 100 mm x 725mm, complete all as specified, directed and shown on drawings.

(f) Removing the existing unserviceable bearer from Sofa and providing new first class hard wood (Teak) bearer of size 40mm x 40 mm x 725mm, complete all as specified, directed and shown on drawings.

(g) Removing the existing unserviceable batten from Sofa and providing new first class hard wood (Teak) batten of size 50mm x 20 mm (length as per drg), complete all as specified, directed and shown on drawings.

(h) Removing the existing unserviceable front rail from Sofa 3 seater and providing new first class hard wood (Teak) front rail of size 35mmx100mmx1590mm, complete all as specified, directed and shown on drawings.

(j) Removing the existing unserviceable front rail from Sofa single seater and providing new first class hard wood (Teak) front rail of size 35mmx100mmx530mm, complete all as specified, directed and shown on drawings.

(k) Removing the existing unserviceable support of back frame from Sofa 3 seater and providing new first class hard wood (Teak) back frame, complete all as specified, directed and shown on drawings.

(l) Removing the existing unserviceable support of back frame from Sofa single seater and providing new first class hard wood (Teak) back frame, complete all as specified, directed and shown on drawings.

(m) S&F in replacement PVC shoes of superior quality, 25mmx25mm dia, fixed with 30mm long screws, complete all as specified, directed and shown on drawings.

BED HARD/ BED PLY TOP (1980mmx900mmx660mm) FD-246/ 247 Removing of old unserviceable following parts from bed hard/bed ply top and supply & fixing new parts made of first class hard wood (Teak wood) duly finished with existing shape and fixed with bamboo pin and fevicol including tightening of other joints, and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings: -

(a) Long rail, 35x90 mm in section and length as per existing size of bed.

(b) Short rail, 35x90 mm in section and length as per existing size of bed.

(c) Complete head board including legs.

(d) Complete foot board including legs.

(e) Stiffener, 40x60 mm in section and length as per existing size of bed.

(f) S&F in repairs 4 mm thick one side teak face and other side commercial face plywood of head board including 12 mm dia half cut Teak wood beading, provided alround on both sides of head board, complete all as specified, directed and shown on drawings.

(g) S&F in repairs 4 mm thick both side teak face plywood of foot board including 12 mm dia half cut Teak wood beading, provided alround on both sides of foot board, complete all as specified, directed and shown on drawings.

(h) S&F in repairs flat iron of bed ply top, size 35mm x 5mm, bent to right angle and fixed on each corner of Bed Hard, complete all as specified, directed and shown on drawings. (Each flat iron support shall be measured and paid separately as one unit).

(j) S&F 12mm thick plywood top of size 1800x900 mm, BWR Grade, approved quality in single piece without any joint to the bed frame with suitable screws wood/steel with cup washer including removal of damaged ply wood top, complete all as specified, directed and shown on drawings.

(j) S&F 12mm thick plywood top of size 1920 to 1950 x900 mm, BWR Grade, approved quality in single piece without any joint to the bed frame with suitable screws wood/steel with cup washer including removal of damaged ply wood top, complete all as specified, directed and shown on drawings.

TABLE DRESSING GENTS FD-230

(a) S & F in repairs new top or bottom of table dressing gents made out of 17/18 mm thick pre-laminated MDF board with both side decorative choice lamination including providing 4 mm thick teak wood beading on front side, complete all as specified, directed and shown on drawings.

(b) S & F in repairs new back of table dressing gents made out of 12 mm thick Ist class HW (Teak) plank including key plate and applying french polishing on all exposed wooden surfaces including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings.

(c) S & F in repairs new drawer of table dressing gents as per drawing including one No. anodised aluminium knob and applying french polishing on all exposed wooden surfaces including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings.

(d) Supply & fixing in repairs Knob of table dressing gents made of anodized aluminium and fixed with screw, complete all as specified, directed and shown on drawings.

(e) S & F in repairs new mirror frame of table dressing gents made out of Ist class HW (Teak) including key plate and applying french polishing on all exposed wooden surfaces including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings.

(f) Supply & fixing in repairs plywood back of mirror of table dressing gents, made out of 6 mm thick plywood, complete all as specified, directed and shown on drawings.

TABLE DRESSING LADIES FD-251

(a) S & F in repairs new top or bottom of table dressing ladies made out of 17/18 mm thick pre-laminated MDF board with both side decorative choice lamination including providing 4 mm thick teak wood beading on front side, complete all as specified, directed and shown on drawings.

(b) S & F in repairs new side (Left or right) of table dressing ladies made out of 17/18 mm thick prelaminated MDF board with both side decorative choice lamination including providing 4 mm thick teak wood beading on front side, complete all as specified, directed and shown on drawings.

(c) S&F in repairs new back support made out of 12 mm thick plywood for box of Table dressing ladies, complete all as specified, directed and shown on drawings.

(d) S&F in repairs base frame legs with batten of table dressing ladies made out of Ist class hard wood Teak and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings.

(f) Removing the existing unserviceable aluminium channel from table dressing ladies and S&F new aluminium channel, fixed with screws, complete all as specified, directed and shown on drawings.

(g) S & F in repairs new mirror frame of table dressing ladies made out of Ist class HW (Teak) including key plate and 6 mm thick plywood mirror back and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings.

(j) S & F in repairs drawer of table dressing ladies as per drawing including one No. anodised aluminium knob and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings.

(k) Supply & fixing in repairs Knob of table dressing ladies made of anodized aluminium and fixed with screw, complete all as specified, directed and shown on drawings.

ALMIRAH MESS UTENSILS FD-93 (M)

(a) Removing of old unserviceable broken shutter from Almirah Mess Utensil and supply and fix new shutter made out of 17/18 mm thick prelaminated MDF board with both side decorative choice lamination including 4 mm thick first class hard wood teak wood beading alround the shutter and fixing in position with new bright finish MS piano hinges, complete all as specified, directed and shown on drawings.

(b) Removing of old unserviceable broken shelf from Almirah Mess Utensil and supply and fix new shelf made out of 17/18 mm thick prelaminated MDF board including 4 mm thick first class hard wood teak wood beading on front side of the shelf, complete all as specified, directed and shown on drawings.

(c) Supply & fixing in repairs plywood back of almirah mess utensils, made out of 6 mm thick plywood and fixed with headless nails, complete all as specified, directed and shown on drawings.

(d) S&F in replacement side (left or right) of almirah mess utensils made out of 25 mm thick Ist class HW (Teak) and fixed in existing position and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings.

(e) Removing old unserviceable bottom frame of Almirah mess utensil S&F New bottom frame made out of Ist class Hardwood (Teak) and fixing in position with screws/Nails and applying french polishing on all exposed wooden surfaces including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings.

BIN LINEN MULTIPURPOSE FD/E6/MAP/09

(a) S&F in replacement PVC beading of Bin Linen Multipurpose, superior quality, complete all as specified, directed and shown on drawings.

(b) S & F in replacement handle of bin linen multipurpose, superior quality and fixed in existing position, complete all as specified, directed and shown on drawings.

M&L preparation of old wooden surfaces by scraping and filling bore holes with putty and finally rubbing with sand paper/abrasive cloth throughly for smooth and clean surface and applying one coat of French polish and over it applying a coat of Touchwood glossy polish (Asian Paints), complete all as specified and directed for the following furniture articles: -

(a) Bed plywood top/ Hard wood FD - 246

(b) Sofa Set 5 Seater FD-281

(c) Sofa Set 4 Seater FD-281

(d) Table Dressing Gents FD-230

(e) Table Dressing Ladies FD-251

(f) Almirah mess utencils FD-93(M)

M/S CHANDER SHEKHAR

SK INDUSTRIES