REPAIR TO SEWAGE LINES, MANHOLE COVERS, CLEANING OF LINE SEPTIC TANKS IN TECH AREA AT AF STN PHALODI

Amount

M&L for cleaning and desilting of sewage lines by honey sucker 100mm dia of any size and shape upto any depth by pumping out /removing liquid waste/sewage ,plugging the ends pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same(silt,sludge &other waste material) in leak proof trucks covered with tarpoline to outside of MOD land all as per existing rules and regulations of civil authorities and flushing the sewer lines with fresh water etc complete all as specified and directed.

All as per item No 1.00(here-in-before) but sewage lines exc 150mm dia complete all as specified and directed.

M&L for cleaning and desilting of manholes depth not exceeding 1.50 metre by pumping out/removing liquid waste/sewage and plugging the ends sewer pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same(silt,sludge &other waste material) in leak proof trucks covered with tarpoline to outside of MD land all as per existing rules and regulations of civil authorities and cleaning the manholes with freah water etc complete all as specified and directed.

M&L for cleaning and desilting of manholes depth exceeding 1.50 metre but not exceeding 3.00 metre by pumping out/removing liquid waste/sewage and plugging the ends sewer pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same(silt,sludge &other waste material) in leak proof trucks covered with tarpoline to outside of MD land all as per existing rules and regulations of civil authorities and cleaning the manholes with freah water etc complete all as specified and directed.

M&L for cleaning the chocked/blocked in AC/CI/PVC soil waste pipe of any dia by removing cleaning eye and refixing the same after cleaning the pipe, making good damaged cement joints, dia of pipe not exc 150mm dia upto ground/stilt plus four floors complete all as specified and directed.

M&L for cleaning the gully trap/nahani trap by removing all sludge/waste etc including cleaning of connected pipe up to 1st Manhole to remove blockage and finally washing with clean water including disposing of all sludge/waste etc (in covered tanks) outside MOD land complete all as specified and directed.

M&L for removal of blockage from WC/EWC by removing all sludge/waste etc including cleaning of connected pipe up to 1st Manhole to remove blockage and finally washing with clean water including disposing of all sludge/waste etc (in covered tanks) outside MOD land complete all as specified and directed.

M&L for Cleaning and desludging of septic tank/soakage well of any size & capacity by honey sucker(mechanically) including pumping out sewage & sludge and deposing all waste including liquid in covered tanks out side the MOD land & buried in excavated pit of adequate size including excavation and covering with earth complete all as specified and directed.

Excavation in trenches, not exc. 1.5 mtr wide and n.exc 1.5 Mtr deep for laying sewage pipe including forming bottom surface at required gradient & getting out in hard/dense soil complete all as specified and directed.

Excavation in trenches, not exc. 1.5 mtr wide and exc 1.5 Mtr but n. exc 3. Mtr deep for laying sewage pipe including forming bottom surface at required gradient & getting out in hard/dense soil complete all as specified and directed.

Demolition and breaking up drain pipes of 100mm bore (Salt glazed stoneware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

Demolition and breaking up drain pipes of bore 150mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

Demolition and breaking up drain pipes of bore 200mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

M&L for 100 mm bore salt glazed stoneware pipe, grade 'A' laid & jointed complete with collars in CM (1:1) with spun yarn & tested complete all as specified & directed.

M&L for 150 mm bore salt glazed stoneware pipe, grade 'A' laid & jointed complete with collars in CM (1:1) with spun yarn & tested complete all as specified & directed.

M&L for 200 mm bore salt glazed stoneware pipe, grade 'A' laid & jointed complete with collars in CM (1:1) with spun yarn & tested complete all as specified & directed.

M&L for Plain cement concrete (1:4:8) type D2 using 40mm graded crushed stone aggregates as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 100mm bore complete all as specified and directed.

M&L for Plain cement concrete (1:4:8) type D2 using 40mm graded crushed stone aggregates as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore complete all as specified and directed.

M&L for Plain cement concrete (1:4:8) type D2 using 40mm graded crushed stone aggregates as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 200mm bore complete all as specified and directed.

Cutting in to existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B1 smooth finished, and reforming benching as required 100 mm bore (internal dia of pipe) complete all as specified and directed.

Cutting in to existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B1 smooth finished, and reforming benching as required 150 mm bore (internal dia of pipe) complete all as specified and directed.

Cutting in to existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B1 smooth finished, and reforming benching as required 200/225 mm bore (internal dia of pipe) complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed.

Removing excavated soil material n exc. 50m and depositing where directed at a level n exc. 1.50m above the starting point complete all as specified and directed.

Demolition of Precast concrete articles /Precast concrete block masonry built in cement mortar of any type complete all as specified and directed.

M&L for precast cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in block masonry with solid blocks, exc. 10 cm in width and setting in Cement mortar (1:6) complete all as specified and directed.

M&L for Precast Cement Concrete (1:2:4) type B1 using 20mm graded stone aggregate as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM (1:6) complete all as specified and directed. Note: reinforcement steel shall be measured and paid sepereatly.

Taking down cement plaster of any description and of any thickness on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L for rendering 15 mm thick comprising first coat 10 mm thick in cement mortar (1:6) and second coat of 5 mm thick in cement mortar (1:4) mixed with water proofing compound in second coat only on fair faces of brick work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed. Note:- WPC will be measured and paid seperatly.

Supply only integral water proofing compound complete all as specified and directed.

M&L for rendering 10 mm thick in CM (1:6) on stone masonary surfaces or other than fair face of brick work including finished even and smooth without using extra cement complete all as specified and directed.

S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or fixed to wall of 75 mm bore complete all as specified and directed.

S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or fixed to wall of 110 mm bore complete all as specified and directed.

S&F PVC (SWR) bends any radius of 75 mm dia complete all as specified and directed.

S&F PVC (SWR) bends any radius of 110 mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl 75mm bore fixed complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm bore fixed complete all as specified and directed.

S&F PVC (SWR) branch piece, single Y equal or unequal 75 mm bore complete all as specified and directed.

S&F PVC (SWR) branch piece, single Y equal or unequal 110 mm bore complete all as specified and directed.

S&F in repairs 200mm bore PVC (SWR) pipes single socketed in any length with solvent joints fixed to walls with and including MS stack clamps out of 50x5 mm flat iron in the interval of 1.50m and 16mm dia round iron stays, including bolts and nuts and securing ends of stays, finishing the mouth of pipe leakproof with CM (1:2) complete all as specified and directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed. Note :Reinforcement cut as required to facilitate demolition.

M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished of flat surface complete all as specified and directed.

M&L for Reinforced cement concrete (1:2:4) type B1 using 20mm graded crushed stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

S&F in repairs white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, Plastic water closet seat cover with hinges, white, closed pattern with flat bottom, and cover with aluminised hinging device, 'P' or 'S' trap of 100 mm bore including all connection complete all as specified and directed.

S&F in repair Stainless steel gratings with or without 100mm bore size fixed with white cement, complete all as specified and directed.

S&F in repair PVC (SWR) 75mm bore floor trap/nahani trap, plain with grating including jointing with solvent cement fixed complete all as specified and directed.

S&F in reapir PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement etc complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15 cm thick (below or above ground level) of any description not other specifically provided for etc complete all as specified and directed.

M&L for hardcore of broken stone of gauge n.exc 63 mm deposited, spread and leveled in layers n exc 15 cm thick, watered and remmed to a true surface etc (for plinth protection) complete all as specified and directed.

M&L for Cement concrete 100 mm thick type D2 (1:4:8) using 40 mm graded aggregate and finishing the concrete surface even and fair without using extra cement complete all as specified and directed.

M&L for Plain cement concrete type B1 (1:2:4), using 20 mm graded crushed stone aggregate,40 mm thick , as in floor and finished even and smooth using extra cement laid in alternate bay and joints filled with and including bituminous compound grade 'A' complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and directed

M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate ) as in floor finishes and leveling course complete all as specified and directed.

M&L Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but n.exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 15mm thick screed bed in cement mortar (1:6) for laying floor finishes complete all as specified and as directed.

Dismantling of stone slab and tiles of any description or thickness in floors, etc. complete all as specified and directed.

Labour only for relaying machine pressed precast conctete interlocking paver block with grey cement & pigment any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M&L for sand filling under floors or in foundation complete all as specified and directed. Note :- Punned thickness shall be measured and paid for.

M&L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortat (1:3) using water proofing compound @ 3% by weight of cement finished even and fair as in sunken floor and wall complete all as specified and directed. Note: WPC will be measured and paid separetely.

M&L for applying two coats of water proofing coating by using water proofing chemical mixed in chemical water and cement ratio as per manufacturer's instructions both on floor as well as on walls of sunken complete all as specified and directed.

M&L for PCC (1:5:10) type E-2 using 40mm graded stone aggregate as in sunken portion complete all as specified and directed.

M&L for 1000mm x 1000mm three mouthpiece HDPE manhole confirming to IS 14796 having minimum thickness 37mm with manhiole cover alongwith necessary fitting complete all as specified and directed.

M&L for 150mm bore HDPE DWC pipe confirming to IS-16098(Part2): 2013 fusing twin layers with inner surfaces smooth and outer surface corrugated, stiffness class SN4 (length 6mtr) alongwith necessary fittings such as tees, bends, socket and leak proof jointing materials etc and laid & jointed complete with collars complete all as specified and directed.

M&L for joint free (edge cut) white glazed ceramic tiles 7 mm to 8 mm thick (square / rectangular) polished of size 350x 250x 7 mm/ 450X 350X 7mm as in skirting / dado etc laid over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete including electric fittings all as specified and directed.

M&L for machine pressed precast conctete interlocking paver block with grey cement & pigment any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M/S BHERA RAM & SONS (BID ID -3372433)

M/S SOLANKI GENERAL SUPPLIERS (BID ID -3372245)