Renovation Of GSTES Office - At Gandhinagar

No. Qty Rate

Removing and scraping of old deteriorated

plaster of any thickness fromm wall / R.C.C

1 500.00 member including stacking of serviceable 20.55 Sqm

material and disposal of unserviceable from

site of work with all lead and lift

Dismantling tiled of stone floors laid in mortar

including stacking of serviceable materials

and disposal of unserviceable materials with

all lead and lift.

Dismantling doors, windows, ventilators etc.

(wood or steel) shutters including chowkhats

3 20.00 architraves, holdfasts and other attachment 263.90 EACH

etc. complete and stacking them within all

lead and lift.(ii) Exceeding 3 Sq.M. in area.

Dismantling sanitary fittings like wash basin.

W.C. pan Indian and European type, flushing

tank etc. including stacking the materials with

all lead and lift.

Dismantling C.I. pipes G.S.W.pipes abd A.C.

rain water pipes with fittings and clamps

including stacking the materials with all lead

and lift ( for any dia, of pipe)

(i) Half brick masonry in common brunt clay

building bricks having crushing strength not

6 91.80 less than 35 Kg/Sq.Cm. in Cement mortar 1:4 629.80 Sqm

(1- Cement : 4 -coarse sand ) in foundation

and plinth (B) Conventional

Providing 15mm thick cement plaster in

single coat on Rough (Similar)side of single

7 405.23 or half brick walls for interior plastering up to 185.41 Sqm

floor two level and finished even and smooth

in (I) Cement mortar 1:3 (1-cement:3-sand)

Providing & Laying 600 mm * 600 mm Anti-

skid Matt finished tiles flooring over 20 mm

(average) base of cement mortar 1:6 (

cement: 6 coarse sand) on new surface with

mm spacer and epoxy filling with 7.5 cm

skirting & cleaning the surface etc. complete

as per detail approved by Architect/ Engineer

Providing & Fixing 600*600 premium quality

GVT tiles dedo up to 8 feet height on 10mm

thick cement plaster 1:3 (1-cement : 3-coarse

sand) and jointed with coloured cement slurry

etc. complete as per detail approved by

Architect/ Engineer in charge

Add Extra for Disposing off the excavated

stuff of above items for lead up to 3.00 km.

Caring out plinth treatment to post

construction / existing structure by spraying

chemical solution for termite control

treatment including labour and material

consistent with I.S.I specification. Using

Chlordane and Chiorpurfiles 20 EC. As Per

11 300.00 6131_paret-II Concentration Weight one 111.25 Sqm

percent is recommended i.e. one liter 20 EC

chemical emulsion with 19 liter give 1 %

concentration inclusive of one liter chemical

emulsion application at the rate of 5 Liter

chemical / Sqm of surface is recommended as

Designing, Providing & Fixing Three Track

colour Anodized aluminum slide windows

having colour anodized sections (of Domal

Section or Equivalent Make) as per design

.The top of the window shall be fixed with

mm thick Frosted/sand ballasted toughened

glass and at the bottom solid panel shall be

fixed . The cost is including of locking

arrangement, Roller, Bearing, 5 mm thick

12 44.53 Frosted/sand ballasted toughened glass with 7,811.09 Sqm

fitting & fixture, black EPDM & transparent

silicon Sealant on outer framing, all necessary

accessories etc. complete for window and

including Mosquito Shutter consisting of

S.S.wire gauge of average width aperature

mm with wire of dia meter 0.63mm necessary

cutting and making good etc. for window as

per detailed drawings and instructions of an

Architect/ EIC.

Designing, Providing & Fixing ventilation

having colour anodized sections (of Domal

Section or Equivalent Make) fixed with

mm thick frosted glass louvers and fixed glass

window. The cost is including of locking

arrangement, fitting & fixture, black EPDM &

transparent silicon Sealant on outer framing,

all necessary accessories etc. complete as per

detailed drawings and instructions of an

Architect/ EIC.

Pro. And fixing single layer water proof

gypsum board 12.5 mm thick sections using

water proof board of size 1220 mm x

mm x 8.0 mm suspended by GI suspender

channel of size 25 mm x 3 mm with

intermediate channel go size 18 mm x 40 mm

x 0.8 mm at 1220 mm center to center ceiling

14 404.25 section of size 40 mm x 35 mm x 0.55 mm at 606.95 Sqm

457 mm c/c and perimeter channel A of size

20 mm x 27 mm x 30 mm x 0.5 mm at edges

& drops incl.paper tap sand sofit cleat, anchor

fastener, scoch bolt connecting cleat, joining

compound top coat on ceiling incl.making

necy.opening for light fitting, diffuser etc.

comp. as per detail drawing as directed

Pro. And fixing single layer water proof

gypsum board 12.5 mm thick sections using

water proof board of size 1220 mm x

mm x 8.0 mm suspended by GI suspender

channel of size 25 mm x 3 mm with

intermediate channel og size 18 mm x 40 mm

x 0.8 mm at 1220 mm center to center ceiling

section of size 40 mm x 35 mm x 0.55 mm at

15 404.25 457 mm c/c and perimeter channel A of size 606.95 RFT

20 mm x 27 mm x 30 mm x 0.5 mm at edges

& drops incl.paper tap sand sofit cleat, anchor

fastener, scoch bolt connecting cleat, joining

compound top coat on ceiling incl.making

necy.opening for light fitting, diffuser etc.

comp. as per detail drawing as directed

Boarder Patta Less Then 0.30 MM is

Considered in it

Providing and laying 16 to 18mm thick

Granite of specified size colour, shade and of

approved make, in skirting, risers of steps,

Ramp, dado, cladding, sill and jambs of door,

window & ventilation frame with mini. two

coat of construction chemical and as per

13 64.20 manufacture specification incl. rubbing and 3,252.20 Sqm

polishing, rounding edge and All joints filled

with coloured cement putty as per architect

detail and wiped to give sharp joints with flush

pointing and washed clean with acid As per

drawings and design supplied by architect and

instruction given by authority and E.I.C.

Constructing Platform with fixing black

granite stone 18 mm thick laid on Polished

Kota Stone , Provision of Polished Kota Stone

Shelf and Sandwich Polished kota stone

14 2.84 Support as per Drawing including rubbing 5,696.61 Sqm

Polishing and Making the surface level and

Clean etc. Completed (Only Top Surface Area

of Platform shall be considered for

Measurement & Payment)

Supply and application of Royal Shine

premium quality acrylic emulsion paint or

equivalent approved brand, suitable for

interior/exterior surfaces, providing a smooth,

durable, and high-gloss finish. The paint shall

be applied on properly prepared surfaces

including cleaning, sanding, and application

of primer/putty wherever required to achieve

an even and long-lasting coating. The work

includes surface preparation, primer coat, and

minimum two coats of Royal Shine paint

applied by brush/roller/spray as per

manufacturer specifications to obtain uniform

shade, superior shine, and weather resistance

Providing and applying elastomeric

waterproofing treatment on terrace over

existing China mosaic tiles using Dr Fixit

16 630.00 Wonder proof 100 or equivalent approved 813.05 Sqm

product, including surface preparation, crack

filling and application of waterproof coating

complete as per manufacturer specifications.

Providing and laying 1200 mm × 600 mm size

Anti-Skid Vitrified Tiles flooring fixed in

mm thick cement sand mortar (1:4), including

machine cutting of 4 mm wide grooves on

both sides of tiles, filling joints and grooves

17 420.00 with epoxy grout, maintaining proper 2,393.85 Sqm

alignment and level, cutting of tiles where

required and cleaning the surface complete

with all materials, labour, tools, machinery

and incidentals as directed by the Engineer-in-

Providing and fixing 75 mm thick full-height

partition made of 18 mm thick HDMR boards

on both sides, fixed on aluminum square pipe

18 164.00 framework, including insulation material 4,089.41 SQMT

inside cavity and provision of door opening

complete in all respects as per approved

drawing and direction of Engineer-in-Charge

Providing, fabricating and fixing in position

full-height glass partition using 12 mm thick

clear toughened safety glass of approved

19 78.00 make such as Saint Gobain or equivalent, 5,807.50 SQMT

from finished floor level up to false ceiling

level, complete in all respects as per drawings

and Architect’s instructions.

Providing, supplying and fixing in position

single/double leaf frameless toughened glass

door of approved design and size, fabricated

from 12 mm thick clear toughened safety glass

conforming to relevant IS standards, machine

polished on all edges with arrises, complete as

per approved drawings and as directed by

Architect in charge (EIC).

Providing & Fixing Executive Table as per

Section Given in Detail Specification With

21 1.00 All Required Fixing Material & Labour ETC 92,920.00 NOS

as per approved drawings and as directed by

Architect in charge (EIC). ED Sir Cabin Table

Providing, supplying, delivering and placing

in position Class-I Officer table complete with

low height side storage unit, drawers and

shutters, conforming to approved PWD / R&B

22 2.00 furniture standards, including all materials, 59,236.50 NOS

hardware, labour, polishing and finishing as

per approved drawings and as directed by

Architect in charge (EIC). Class 1 Office

Providing, supplying, delivering and placing

in position Class-II Officer table complete

with low height side storage unit, drawers and

23 3.00 shutters, conforming to approved PWD / R&B 52,267.50 NOS

furniture standards, including all materials,

hardware, labour, polishing and finishing.

Class 2 Office Tables

Providing & Fixing Desk as per Section

Given in Detail Specification With All

24 29.69 Required Fixing Material & Labour ETC As 2,903.75 SQMT

per instructed by engineer in charge Account

Staff , EMRS,Admin,Engineer,HR unit

Providing & Fixing Low Height & Upper

Cabin ate Storage as per Section Given in

25 48.00 Detail Specification With All Required Fixing 7,080.75 SQMT

Material & Labour ETC As per instructed by

engineer in charge All Cabin Storage Units

Providing and supplying approved make

High-Back Executive Revolving Chair

26 1.00 suitable for office use, complete in all respects 17,132.13 NOS

as per PWD / R&B standards and as directed

by the Engineer-in-Seat & Back ED Sir Chair

Providing & Fixing Chair as per Section

Given in Detail Specification With All

27 6.00 Required Fixing Material & Labour ETC As 16,435.23 NOS

per instructed by engineer in charge ED Sir

Cabin Visitor Chair

Providing and supplying High Back

Revolving Executive Chair of approved make

28 5.00 and model, conforming to the following 12,486.13 NOS

specifications & As per instructed by engineer

in charge Class 1 & Class 2 Office Chair

Providing, Supplying and Delivering of

Medium Back Revolving Office Chair (Mesh

Back Type) complete in all respect as per

29 10.00 approved design and specification for use in 12,079.60 NOS

Government Offices (R&B / PWD) ETC & As

per instructed by engineer in charge Class 1 &

Class 2 Office Visitors Chair

Providing & Fixing Chair as per Section

Given in Detail Specification With All

30 25.00 Required Fixing Material & Labor ETC As 3,716.80 NOS

per instructed by engineer in charge All Cabin

Providing & Fixing Palmet or Wall Paneling

as per Section Given in Detail Specification

31 112.35 With All Required Fixing Material & Labour 4,308.01 SQMT

ETC As per instructed by engineer in charge

Providing, Supplying and Placing in Position

ED Sir Visitors sofa set (3-Seater + 1-Seater +

1-Seater) as per approved design, complete in

32 1.00 all respects, suitable for office / hospital / 97,333.70 NOS

public waiting area, with the following

specifications As per instructed by engineer

in charge ED Sir Visitors Sofa

Providing Visitor Sofa as per Section Given

in Detail Specification With All Required

33 2.00 Fixing Material & Labour ETC As per 41,523.63 SQMT

instructed by engineer in charge ED Sir Anti

Room & Main Office Visitor Sofa

Providing & Fixing MS Decorative Jali as

per Section Given in Detail Specification

34 3.00 With All Required Fixing Material & Labour 4,856.02 SQMT

ETC As per instructed by engineer in charge

Decorative with Fluted Glass & Ms Frame

Providing and fixing Blackout Roller Curtain

of approved make and shade as per site

requirement. 1. The curtain shall be made of

100% blackout polyester fabric with

minimum 300 GSM thickness.2. Fabric hall

have PVC coated / rubber coated backing to

ensure complete light blocking.3. The roller

tube shall be made of heavy-duty aluminum

pipe of minimum 32mm/38mm dia as

required.4. Mechanism shall be side-operated

chain type with smooth clutch

system.5Bottom rail shall be powder coated

aluminum section.6. Side brackets shall be

MS/Aluminum with powder coating finish.7.

Chain shall be high strength plastic or SS bead

chain.8. Installation shall include all

necessary hardware, screws, fasteners and

supports.9. Shade and colour shall be

approved by Engineer-in-Charge.10. Size

shall be as per site measurement and attached

drawing.11. The rate shall include supply,

installation, testing and commissioning

complete As per instructed by engineer in

charge Roller Curtains

Providing & Fixing Soft Board as per Section

Given in Detail Specification With All

Required Fixing Material & Labour ETC As

per instructed by engineer inchargeSoft Board

Providing and fixing approved make self-

adhesive crystal dusted decorative privacy

glazing film (Opac film) on existing clear

glass of office cabins, partitions, doors, etc.,

including surface preparation, cleaning,

alignment, trimming, finishing, and all

necessary accessories complete as directed by

the Engineer-in-Charge

Providing and fixing PANDORA - UV Print

on Translucent Fabric Providing and fixing

de-mountable PANDORA Stretch Fabric

ceiling made in Germany PVC base with uV

Printing Translucent Fabric on self-supporting

PVC/Aluminum frame Profile. Printing

machine is in house Japanese technology (10

Years Warranty) A proprietary semi rigid

PVC harpoon is welded on the periphery of

the PVC ceiling membrane and light box

should be sealed in a way it should be dust

free. Contractor to ensure all services viz

painting including other interior finishing

works should have been completed before its

installation. With INPUT VOLTAGE -

VDC RATED POWER - 12w per Meter

INPUT WATTAGE PER METER - 12W

WATT PER LED LUMENS/1 WATT-

120/130 ARAMETERS LENS

SPECIFICATION: BEAM - 170 DEG TEMP

- 35-95ENVIRONMET - SGS ROHS LPV

LED - 5 year Warranty. (Powered by

OSRAM) as directed by the Engineer-in-

Supply, installation, testing & commissioning

of Mobile File Compactor System complete

39 1.00 with CRCA steel shelving, mobile carriage, 464,600.00 NOS

rail track, drive mechanism, locking system

and accessories. 4 BAY Compact

Providing, fabricating and fixing decorative

Stainless Steel mural panel made from SS

grade sheet of minimum 1.5 mm thickness,

designed and cut using CNC / Laser cutting

technology as per approved design, drawings

and pattern. The work shall include cutting,

shaping, finishing, polishing and edge

grinding of the SS sheet to achieve smooth

and accurate decorative patterns. The mural

shall be supported with MS / SS backing

frame of suitable section, properly welded,

ground and finished. The panel shall be fixed

to the wall / structural surface using SS studs,

anchor fasteners, spacers and necessary

hardware, maintaining required gap from the

wall as per design. All welding joints shall be

properly finished and surfaces shall be

hairline / mirror finish as approved by the

Engineer-in-Charge.

The rate shall include all materials, labour,

CNC cutting charges, frame fabrication,

polishing, transportation, lifting, fixing,

scaffolding if required and all necessary

accessories, complete in all respects as per

approved drawing, design and instructions of

the Engineer-in-Charge

Providing, fabricating, supplying and fixing

of individual Stainless Steel (S.S.) Letters,

41 3.00 Figures and Logo of approved design, size and 43,742.09 SQMT

pattern, complete in all respects as directed by

the Engineer-in-Charge

Providing and fixing factory made solid core

flush door shutter of approved make

conforming to IS:2202 (Part-I), 35 mm thick,

with hardwood internal frame and solid block

board / particle board core, finished with

mm thick decorative laminate sheet of

approved brand and shade on both sides,

including approved adhesive, pressed in hot

42 6.00 press, edges lipped with 1st class teak wood / 6,744.14 SQMT

hardwood lipping 6 mm thick, including

making a vertical glass slit of required size

and fixing 5 mm thick clear / frosted glass

with teak wood beading and screws, complete

in all respect including necessary cutting,

finishing, labour, tools & tackles but

excluding cost of fittings & fixtures, complete

as directed by Engineer-in-Charge.

Point wiring for Light / Bell with 2-1.5

sq.mm & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to

10 mtr length , in below type of pipe erected

with 6A Modular type switch / bell push &

accessories and earth continuity of following

type, erected on PVC / Metallic/Wooden box,

43 36.00 449.45 Point

single mounting base frame covered with

extured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling

rose / H.D.Connector as directed.(f) with

medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete

Point wiring for secondary light point with 2-

1.5 sq.mm & earth wire of 1.5 sq.mm (green)

both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires, in

below type of pipe to be erected complete with

earth continuity and necessary connection

with primary light with accessories erected on

44 95.00 151.50 Point

Metal / PVC / wooden box covered with 3 mm

thick PC (Polycarbonate) / Acrylic sheet for

open / concealed wiring. with necessary Lamp

holder / ceiling rose / H.D.Connector as

directed.(f) with medium class Rigid PVC

pipe and accessories erected concealed in

wall/ceiling complete

Point wiring for Two Way Controlled Light

Point with 2-1.5 sq.mm & earth wire of

sq.mm (green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in following

type of pipe to be erected concealed in /

flushed on wall / ceiling complete with 6A

45 2.00 Tissino Type ISI marked accessories with 349.46 Point

earth continuity erected on

Metal/PVC//Wooden box covered with 3 mm

thick PC (Polycarbonate) / Acrylic sheet. with

necessary Lamp holder/ceiling rose /

H.D.Connector as directed(a) with medium

class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (Green) both are of

ISI marked 1.1 KV Grade FRLS PVC

insulated multi strand copper wires up to

mtr length, in below type of pipe erected with

6A Modular type switch and hum free EME

step type electronic fan regulator mounted

and accessories with earth continuity of

46 25.00 following type erected on PVC / 629.23 Point

Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white

front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary

ceiling rose / H.D.Connector as directed.(f)

with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

Point wiring for on board Looped Plug with

6A Modular type switch & 5 pin socket

erected on PVC / Metallic/Wooden box,

47 17.00 single mounting base frame covered with 241.39 Point

textured / metallic/white front plate modules

erected on / in wall / ceiling with following

type accessories CAT-III

Point wiring for Individual Plug with & earth

wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length,

in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on

PVC / Metallic/Wooden box covered with

48 9.00 appropriate front plate modules erected on / in 473.69 Each

wall / ceiling as per pipe erected with

following type of accessories.[I] For 6A Plug

and 6 a switch with 2-1.5 sq.mm Cu. Wire

from nearby switchboard/mcb db board(f)

with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete Cat. III

Point wiring for Individual Plug with & earth

wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length,

in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on

PVC / Metallic/Wooden box covered with

appropriate front plate modules erected on / in

wall / ceiling as per pipe erected with

following type of accessories.[II] For 16A

Plug and 16 amp switch with 2-2.5 sq.mm Cu.

Wire from mcb db board.(f) with medium

class Rigid PVC pipe and accessories erected

concealed in wall/ceiling completeCat. III

Providing following type of Modular Type

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate, modules erected with necessary

connections as per site situation directed by

Engineer In charge. Blank Plate Single cat

Providing and erecting ISI mark Medium

class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling

51 283.00 erected with necessary PVC fittings & 23.23 Mtr

Junction boxes fixed with adhesive solution &

Clamps with following dia of pipes, in

approved manner as directed.(A)20 mm

Providing and erecting ISI mark Medium

class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling

52 227.00 erected with necessary PVC fittings & 32.32 Mtr

Junction boxes fixed with adhesive solution &

Clamps with following dia of pipes, in

approved manner as directed.(B)25 MM

Providing and erecting Mains with 1.1 KV

grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following

type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm

copper conductor FRLS PVC insulated

stranded wire of green colour for earth

continuity of following size (A) with medium

class Rigid PVC pipe and accessories (a)

wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV

grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following

type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm

54 415.00 copper conductor FRLS PVC insulated 78.78 Mtr.

stranded wire of green colour for earth

continuity of following size (A) with medium

class Rigid PVC pipe and accessories(B) with

medium class Rigid PVC pipe and accessories

(a) 2 wire 2.5 sq. mm

providing and erecting Mains with 1.1 KV

grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling

55 20.00 with 2.5 sq. mm copper conductor FRLS PVC 107.06 Mtr.

insulated stranded wire of green colour for

earth continuity of following size.(A) with

medium class Rigid PVC pipe and

accessories.(a) 2 wire 4 sq. mm

Supplying and erecting LED indoor fittings

with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/aluminum

pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser

housed in aluminum casted body with

company mark/name 160V to 270V,Power

Factor more than 0.95, THD < 15 %, CCT

3000 K to 6500K, Luminaire efficacy>

56 123.00 589.84 Point

lumens/watt, LED driver efficiency > 85 % (

fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

any wattage capacity between the ranges

shown.)(A) Square/ Circular shaped

Surface/Recessed Mount Down light with

provision for spring loaded mounting clips

complete.IP20 (iii) 16-20 watts, Surge-2 KV

Supplying and erecting LED indoor fittings

with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/aluminum

pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser

housed in aluminum casted body with

company mark/name 160V to 270V,Power

Factor more than 0.95, THD < 15 %, CCT

57 2.00 220.18 Point

3000 K to 6500K, Luminaire efficacy>

lumens/watt, LED driver efficiency > 85 %(

fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

any wattage capacity between the ranges

shown.)(D) LED Strip Light (ii) Minimum

7.2W -240 LED per meter,(2 wire, IP-65) with

non integral suitable Driver complete CAT-III

Supplying and erecting LED indoor fittings

with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/aluminum

pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser

housed in aluminum casted body with

company mark/name 160V to 270V,Power

Factor more than 0.95, THD < 15 %, CCT

58 2.00 3000 K to 6500K, Luminaire efficacy> 85 1,794.77 Point

lumens/watt, LED driver efficiency > 85 % (

fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

any wattage capacity between the ranges

shown.)(B) LED Panel Light with provision

for Plane front frame with translucent cover

fixed to housing complete.IP20(vi) 36 watts,

24" x 24", Surge- 2KV cat-iii

Supplying and erecting LED indoor fittings

with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/aluminum

pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser

housed in aluminum casted body with

company mark/name 160V to 270V,Power

Factor more than 0.95, THD < 15 %, CCT

3000 K to 6500K, Luminaire efficacy>

59 4.00 312.09 Point

lumens/watt, LED driver efficiency > 85 %(

fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

any wattage capacity between the ranges

shown.) (A) Square/ Circular shaped

Surface/Recessed Mount Down light with

provision for spring loaded mounting clips

complete.IP20 (H) Mirror Light 9 Watts, wall

mounted minimum 1 feet long

Supply, Installation, Testing and

Commissioning of suitable sweep, BEE 5 Star

rated, Ceiling fan with Brush Less Direct

Current (BLDC) permanent ferrite magnet

Motor, class of insulation: B, Rust free

nos.Aluminium blades, 2 nos. canopies,

shackle kit with earthling provision, copper

winding, Power factor not < 0.9, Service

Value (CMM/W) minimum 6.85, Air delivery

minimum 215 CMM, 350 RPM,230v

60 25.00 (tolerance as per IS : 374-2019), THD < 10%, 2,885.57 Each

with remote unit for Speed Control and all

remaining accessories including safety pin,

nut bolts, washers, temperature rise =

degree C (Max.), suitable for 140 to

Voltage and rectifier circuit with surge, over

current and overload protection , 50 Hz,

Single phase AC Supply, earthling etc.

Complete as required.[ Make shall be

approved by Engineer in Charge] (B)

mm Sweep (48")

Supplying & erecting fan hook box of 10 mm

M.S. round bar bounded to the RCC bars up

to 50mm length each side and pierced through

a 16 Gauge M.S. box / Heavy Duty PVC box

complete erected concealed in Ceiling with

necessary finishing.

Providing 2.5mm.thick laminated acrylic

sheet to cover the fan hook or Fan box.

Supplying & erecting approved make low

noise decorative exhaust fan having square

frame ABS body with inbuilt lowers & square

frame.250mm with 1350 RPM Cat.II

providing and erecting Approved make

RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for

operation on single phase 240 V,50Hz. having

characteristic of quick action & tripping with

all advance feature & do not incorporate any

electronic component. For following Max.

Rating erected as directed (I) 25 Amps. DP

providing and erecting Approved make

RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for

operation on single phase 240 V,50Hz. having

characteristic of quick action & tripping with

all advance feature & do not incorporate any

electronic component. For following Max.

Rating erected as directed (ii) 40 Amps. DP

Providing and erecting Miniature circuit

breaker single pole 6A to 25A suitable to

operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with

ISI Mark .Cat.III (1 ph DB + LDB)

Providing & erecting 415V MCB Four Pole

Switch for Lighting Load (B curve) having

67 3.00 10KA breaking capacity & confirms to IS 638.32 Each

:8828 in existing box having following

capacity (b)40 Amp. Cat-III.

Providing and erecting Sheet Steel powder

coated MCB distribution board - flush /

surface mounted fitted with busbar, neutral

link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB

to house appropriate nos. of MCBs.(The DBs

should be used of same company of MCB to

be used) suitable for(B) three phase incoming

and single phase horizontal type outgoing Per

phase isolation type (PPI) (i)4 way

Providing and erecting Sheet Steel powder

coated MCB distribution board - flush /

surface mounted fitted with busbar, neutral

link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB

to house appropriate nos. of MCBs.(The DBs

should be used of same company of MCB to

be used) suitable for(B) three phase incoming

and single phase horizontal type outgoing Per

phase isolation type (PPI) (ii)6 way

Providing and erecting XLPE (IS:7098)(I)-88

ISI armoured cable multistrand / Solid

Aluminium conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing

trench / pipe of following size of cables(A)

core 4 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88

ISI armoured cable multistrand / Solid

Aluminium conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing

trench / pipe of following size of cables(B)

core 6 Sq. mm

Providing and, fixing heavy duty flange type

brass cable gland with rubber ring for PVC

72 6.00 insulated armoured cable complete with out 33.33 Each

going tails, insulating tape etc for following

size of cables.(A) 2 to 4 core 2.5/4 Sq. mm

Solder less crimping type Copper lugs

conforming to IS suitable for cable of

following size evenly crimped with high

73 2.00 pressure tool & connected to switchgear 8.08 Each

terminals with brass/cadmium plated nut bolts

in an approved manner. (A) 1.5/2.5 to

Supplying & erecting in earthpit of minimum

bore dia. 225mm size approved make Safe

Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of

corrosion free hot dipped G.I.Pipes having

Outer pipe dia of 80 mm having 80-200

Micron galvanising, Inner pipe dia of 40 mm

having 200-250 Micron galvanising,

connection terminal dia of 14 mm with

constant ohmic value surrounded by highly

conductive compound with high charge

dissipation suitable for following type of

74 2.00 applications with chamber and heavy duty 10,593.89 Each

cover.(approved make OEM has to submit

test certificate including value of earth

resistane of installation.[C] For Electrical

Installation covering Transformer Neutrals,

Lightning arrester Earthing, A.C.Plant &

Sensitive Computer System(like

Automation, SCADA)i.e. independent

Earthing located in other than normal soil

i.e. Soft Rock, Marshy Soil etc..

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of

Providing and erecting required size HOT

deep Galvanised iron strip for earthing of H.T.

, OCB/ ACB/ Transformer LT panel board,

Motors etc. using proper clamp.

Providing and erecting HOT deep Galvanised

iron strip wire 8 to 16 SWG.

SITC of Digital / PCM / TDM EPABX

System having SMT design, system with

flexible universal slots. Inbuilt Auto attendant

facility, Minimum 15 Nos. conference,

Analog extension line, Calling GSM, E&M

line, PRI / EI & VOIP program me through

Analog telephone digital key from Ethernet,

public address cord, shall have unrestricted

simultaneous dialing facility,

QSIG protocol on PRI, 95 / STD / ISD / Local-

Locking, Class of Service, Quick Dial-Single

Digit dialing of any two external number,

Once only ring device, Chairman / Secretary -

Do not disturb Facility, Power Down Mode,

Hot Line, Hot Outward Dialing, Day Night

Mode, Auto Call Back, Barge-in, Call Pick Up

& Call Transfer, Call transfer while Ringing

with Voice Guide System, (DISA), Caller ID

(CLI), CLI Base ECF, CLI Base routing

Internet Ready Port, External Music Port, Call

Budgeting, Call Most Calculation (ASMDR),

DID Direct Inverse Dialing, External Music

Input, Fax Homing, Global Directory Printing

with following capacities [[Approved by

Competent Authority i.e. not Below the rank

of Executive Engineer ] [C] No of Extension

48, No of Junctions 9, 8 Port IP Resource in-

built, 4 Port Web base Video Conferencing,

No of expandable ports : 128, Operators

Console - 01 Compatible : ISDN

Supplying & erecting push button type

telephone instrument having speaker phone

Caller ID & hands free dialing system &

memories with display system Single line

[[Approved by Competent Authority i.e. not

Below the rank of Executive Engineer ]

Providing following type of Modular Type

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate , modules erected with necessary

connections as per site situation directed by

Engineer In charge.(3) Two Pin/RJ-11

Telephone Socket [A] For One Gang cat III

Providing & Erecting 6 core fibre optic SM

80 50.00 9/125um double sheath, CSTA, Unitube, 58.58 MTR

Outdoor cable (per m)

SITC of Patch Panel Cat 6 UTP Keystone

Type- 24 Port-Fully Loaded [Approved by

Competent Authority i.e. not Below the rank

of Executive Engineer ]

Providing & erecting Switch board for

Computer or electric apparatus consisting of

following modular type accessories mounted

with PVC / Metallic concealed/open box

with single mounting base frame covered with

textured/metallic /white front plate,modules

erected with necessary connections as directed

1 no. 6A/16A universal plug-switch

combined. 3 nos. 6A Switch 3 nos. 6A 5 pin

Plug Cat III

SITC of CAT6 UTP 24AWG PATCH

CORD:1M,Plug 30U' Snag less [Approved by

Competent Authority i.e. not Below the rank

of Executive Engineer ]

Providing following type of Modular Type

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate , modules erected with necessary

connections as per site situation directed by

Engineer In charge[B] For Two Gang(8)

Computer RJ-45 socket Cat.III

Providing & Erecting approved make

following size of TV Co-axial flexible cable

comprising inner conductor of solid bare

copper insulated with Foam PE & Secondary

conductor made of poly - Aluminium film

bonded Al. Braids @ suitable coverage

overall sheathed with black PVC

insulation.(e) RG-11

Supplying & erecting approved make LAN

86 100.00 cable of following size in existing pipe as per 45.45 Mtr

direction [C] CAT -

Providing and erecting Inverter based

approved make split air-conditioning unit

consisting of condensing unit with variable

speed fan motor, inverter type hermetically

sealed rotary compressor with accessories etc.

duly connected separately erected evaporating

87 12.00 unit and blower motor with its accessories by 59,694.03 EACH

means of extra supplied proper insulated

copper tubing,drain PVC pipes suitable for (

cost includes Eco Friendly green gas charging

and 15A plug top & Remote Control & MS

Stand) with necessary core cutting.(C) for

to 2 ton capacity-Premium Cat.

Supplying & installing MS standard type

stand mounting for outdoor unit of Split A.C.

upto 4 TR capacity erected with necessary

hardware materials as directed.

Supplying and erecting insulated pair of soft

copper tubing open or concealed including

89 360.00 power and control cable,necessary PVC drain 822.14 MTR

pipes for Split AC machine up to 4 TR

SITC of Microprocessor based Net-workable

Analogue Addressable Fire Alarm Control

Panel. The Panel shall be compliant with

EN54-2, EN54-4 and approved by LPCB. The

Fire Alarm Control Panel shall have inbuilt

one loop. The Panel must have large graphic

display. The Panel must also have the

90 1.00 capability to take Addressable Intelligent 93,930.00 EACH

Wired and Wireless Devices on same loop.

Each loop shall have a capacity of

analogue Addressable devices and 127 Base

sounders/Base Sounder Beacons. The Panel

shall have 240 V AC power supply along with

automatic Battery Charger. Non-Networkable

Approved by LPCB

SITC of Analogue Addressable Multi- Sensor

which is fully compatible with Analogue

Addressable Protocol,having removable high

performance chamber with Twin fire LED's

91 41.00 sensitivity modes 1% to 4.5% obs/m, 4,545.00 EACH

Incorporate Optical and dual Heat elements,

lock mechanism (sensor to base),

Electronically addressed, Pulsing/non-pulsing

controlled from panel. Approved by LPCB &

SITC of sensor common mounting base,

includes stainless steel contacts, slim profile -

92 1.00 only 8mm, quick connection via square cable 454.50 EACH

clamps, facility for remote indicator,

Approved by LPCB

SITC of Analogue addressable loop powered

Base Sounder, variable sound output 50 ~

dB(A) (±2 dB(A)) output at 1 metre, 51 user-

compatible), Auto shutdown feature prevents

noise-pollution, Approved by LPCB & VdS

SITC of Analogue Addressable Multi- Heat

Sensor which is fully compatible with

Analogue Addressable Protocol,having

removable high performance chamber with

Twin fire LED's allow 360 degree viewing,

degree Celsius, Incorporates Fixed

Temperature and Rate Of Rise Heat elements,

lock mechanism (sensor to base),

Electronically addressed, Pulsing/non-pulsing

controlled from panel. Approved by LPCB

(EN54: Part 5)

SITC of Manual Call Point approved to EN54-

95 1.00 11:2001, Approved by LPCB 4,545.00 EACH

Easy to install, push-fit wiring terminals

96 1.00 Addressable Call Point PCB 4,545.00 EACH

Providing lying and jointing in true line and

level 15 mm dia. U.P.V.C. Pipe (as per ASTM

D 1785 SCH - 40) line including fittings make

or equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with

the help of clamp at every two meter C/C or

shall be connected as directed including

testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all

materials.

Providing lying and jointing in true line and

level 25 mm dia. U.P.V.C. Pipe (SCH - 40)

line including fittings make or equivalent as

approved by Engineer In Charge. Pipe shall be

98 10.00 fixed on the wall with the help of clamp at 108.36 Mtr.

every two meter C/C or shall be connected as

directed including testing of pipe and joints

and fixing the same with adhesive solvent,

including cost of all materials.

Providing lying and jointing in true line and

level 40 mm dia. U.P.V.C. Pipe (SCH - 40)

line including fittings make or equivalent as

approved by Engineer In Charge. Pipe shall be

99 25.00 fixed on the wall with the help of clamp at 174.76 Mtr.

every two meter C/C or shall be connected as

directed including testing of pipe and joints

and fixing the same with adhesive solvent,

including cost of all materials.

Providing lying and jointing in true line and

level 50 mm dia. U.P.V.C. Pipe (SCH - 40)

line including fittings make or equivalent as

approved by Engineer In Charge. Pipe shall be

100 20.00 fixed on the wall with the help of clamp at 230.90 Mtr.

every two meter C/C or shall be connected as

directed including testing of pipe and joints

and fixing the same with adhesive solvent,

including cost of all materials.

Providing & fixing in position cowl vent to

pipes of 75 mm

Providing & fixing in position cowl vent to

pipes of 110 mm

Providing and Laying & Jointing 75 mm dia

uPVC SWR Pipe Type B conforming to IS

13592-1992 with one end plain & other end

103 18.00 socketed with solvent/rubber ring & fittings 556.76 Mtr.

conform to IS:14735 with clamps at 2 mtr

center to center on wall including testing of

pipes, adhesive solvent cement, etc complete

Providing and Laying & Jointing 110 mm dia

uPVC SWR Pipe Type B conforming to IS

13592-1992 with one end plain & other end

104 35.00 socketed with solvent/rubber ring & fittings 936.52 Mtr.

conform to IS:14735 with clamps at 2 mtr

center to center on wall including testing of

pipes, adhesive solvent cement, etc complete

Providing & Fixing PVC SWR Nahni Trap IS

14735 for drain - 100 mm diameter with jali

of 150 mm diameter with self cleansing design

with CI scread down or hinged grating

including cost of cutting & making the good

Providing and fixing wash down water closet

( European type, WC pan) with integral P or S

trap including jointing the trap with soil pipe

in cement mortar 1:1 (1 Cement : 1 fine sand)

( Seal and cover to be measured and paid for

separately) A) Vitreous China, white colour

Providing and fixing 25 mm half turn CP flush

cock with all accessories

Providing & fixing of Hand Shower (Health

108 4.00 Faucet), ABS body, 1 Rmt Long pvc Tube and 686.80 Mtr.

Wall Hook accessories to complete the item.

Providing & fixing in position 15 mm C.P.

brass 2 way bib cocks of best quality

Providing and fixing GI inlet connection for

flush pipe with WC pan

Providing and fixing plastic seat and cover for

wash down water closet with C.P. brass hinges

and rubber buffers A) Black plastic seat and

Providing and fixing undercounter/table top

type wash basin with single hole for pillar trap

including cutting holes and making good the

112 4.00 same but excluding granite/marble platform 656.50 Mtr.

a) Vitreous china table top wash basin

560mm X 400mm size in white colour,

oval/rectangular shape

Providing and fixing C.P. brass waste for

wash basin or sink of 32 mm

Providing and fixing M.I. fisher union for

wash basin or sink. of 32 mm

Providing & Fixing of SS Sink Glosy ASIS

304 Grade x 1mm thick with over all size

610x460 mm & bowl size 560x410x200 with

Providing and fixing 600mmX450mm

bevelled edge mirror of superior glass

116 4.00 mounted on 6mm thick A.C. sheet or plywood 615.09 Mtr.

sheet and fixing to wooden plug with C.P.

brass screws and washers.

Providing and fixing of CP angle valve of

117 3.00 following size 480.76 Mtr.

Providing and fixing of screwed down bib taps

118 2.00 of following size Brass Chromium plated Bib 220.47 Mtr.

tap of 15 mm

Providing and fixing pillar tap capstan head

119 2.00 screw down high pressure with screw and 364.31 Mtr.

back nuts of 15mm of 15 mm size

Providing and fixing gun metal check or non

return full way wheel valve of 40 mm

Providing and fixing gun metal full way wheel

121 1.00 valve of 25 mm (Chapter- 23-Page-211-R&B 156.80 Mtr.

SOR 2021-22, Item code 23037A1

Providing and fixing gun metal full way wheel

valve of 40 mm (GWSSB SOR 22-23)

Providing and fixing gun metal full way wheel

valve of 50 mm(GWSSB SOR 22-23)

Providing and fixing 50 mm Float Velve

(GWSSB SOR 22-23)

Providing and fixing Chromium plated bottle

125 5.00 trap with necessary coupling of approved 331.29 Mtr.

quality for wash basin.

Providing erecting and fixing double coated

Syntex or equivalent HDPE (ISI) mark water

126 1.00 tank of required capacity each with all 3.79 Mtr.

necessary fittings & connections etc.

completed on terrace.

Supplying, installing, testing and

commissioning of Domestic Reverse Osmosis

(RO) Water Purification System of minimum

8–12 LPH capacity, wall mounted type,

consisting of minimum 5-stage purification

system including sediment filter, activated

carbon filter, RO membrane, post carbon filter

and mineral / UF cartridge, complete with in-

built food grade storage tank (minimum 8–12

litres), booster pump, auto cut-off system, low

& high pressure switch, inlet solenoid valve,

fittings, RO faucet, electrical and plumbing

connections, complete in all respects,

including one year comprehensive warranty

with minimum three free services, as directed

by Engineer-in-Charge