DAY TO DAY MAINTENANCE AND CLEANING OF SEWAGE LINE AND REPAIRS TO BOUNDARY WALL FENCING GATE HARDSTANDING MANHOLES SEPTIC TANK REPAIRS TO DRAIN ETC AT 17 FBSU 257 SU 340 TRU AFSC UNDER AGE BR II GE AF TRIVANDRUM

Amount

Checking of joinery (wooden/steel) iron/aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, minor adjustment of joinery, door /windows by means of planer/chiselling etc. including petty repairs material like screws/nails, plug etc. to make it functional. Note : Any items required to be replaced shall be paid under respective items of this schedule and in that case this items shall not be measured and paid.

S&F in repairs Aluminium curtain rod 20mm dia with holder/bracket, stops, rollers etc all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins or spring clips and providing and fixing new clips or pins all as specified.

S&F in repairs stainless steel wire cloth, 0.56mm nominal dia wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staple, wooden beads or galvanised steel small nut and bolts etc. all as specified and directed.

S&F in repairs 1st class hard wood beads, straight (any size) for glazed or gauzed joinery, renewed, including miters etc. all as specified and directed.

S&F in repairs MS helical door spring 300mm size including roller and roller plate fixed to wooden or steel frames with welding etc complete all as specified and directed.

S&F in repairs 100 mm long aluminium anodised hasp and staple with mild steel hinge pin including bolts to hinge plate and fixed with screws all as specified and directed.

All as per Ser item No. 8 above but 125 mm long.

All as per Ser item No. 8 above but 150 mm long.

S&F in repairs aluminium alloy sliding door bolt 300 mm long with hasp, staple ( bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F in repairs 150 mm aluminium handles, cast type, anodised complete all as specified and directed.

All as per Ser item No. 12 above but 125 mm Size.

S&F in repairs 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F in repairs 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified and directed.

S&F in repairs mild steel cold rolled butt hinges medium weight 100 mm long fixed to pressed steel/angle iron frames by welding.

S&F in repairs 200 mm long mild steel barrel tower bolts, stove enameled black, with bright bolt complete all as specified and directed.

S&F in repairs mild steel sliding door bolt plate type 300 mm long stove enameled black with bright bolt not less 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F in repairs 125 mm long mild steel pressed steel handle, oval type, stove enameled black all as directed.

S&F in repairs 18/19 mm thick block boards, grade-2 quality, interior grade, commercial type, fixed with screws as in shelves and shutters of cup board etc complete all as specified and directed.

S&F in repair 18/19 mm thick prelaminated particle boards, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work complete all as specified and directed.

S&F in repairs ply wood grade BWR type BB, 12 mm thick fixed to timber frame work with nails etc complete all as specified.

Taking down chowkats or frames (without taking off shutters from frame) not exc 1.50 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed.

Taking down chowkats or frames (without taking off shutters from frame) exc 1.50 Sqm and not exc 4.00 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed.

Taking down Shutters of any description exc 1.0 sqm and n.exc 2 sqm each all as specified and directed.

S&F 30 mm thick 2nd class hard wood plain framed, panelled shutter (any number of shutter) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood partical board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S & F 30 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with plain, chamfered or rounded, mitered and rebated sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule part – I (Specifications - 2009) complete all as specified and directed.

S & F 30 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton window shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with plain, chamfered or rounded, mitered and rebated sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (b) of MES schedule part – complete all as specified and directed.

S&F plain, solid, 2nd class hard wood straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered put together with pinned at joint etc complete.

S&F MS flat iron as in hold fast etc, wall ties, hooks for hanging fans and similar small articles conforming to Fe-290-0 Gde-E-165 all as specified.

S&F 75 mm long mild steel butt hinges, medium weight, cold rolled and fixed all as specified.

S&F 100 mm long mild steel butt hinges, medium weight, cold rolled and fixed.

S&F 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed.

S&F 200 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed.

S&F 100 mm long aluminium handles, cast type, anodised and fixed.

S&F 150 mm long aluminium handles, cast type, anodised and fixed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.

S&F floor door stoper of 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor.

S&F 300 mm, mild steel ordinary rat tail, rod pattern springs including roller and roller plate complete.

S&F aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or aluminium wire staples complete all as specified and directed.

S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, size 140 mm complete all as specified and directed.

S&F in repairs door closers of aluminium die cast body hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to1000 mm in width and of weight between 61 to 80 kgs and fixed.

S&F 3.00 mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F 4.80 mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beads in squares exceeding 0.50 Sqm in each pane complete all as specified and directed.

S & F 6mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) all as specified and as directed.

Checking and attending to water leakage from taps, flushing cisterns, wash hand basins and other sanitary fittings/fixtures and any obstruction to water supply, requiring plumber work and carryout minor repairs such as replacement of washers, check nuts, tightening of fittings of flushing cistern etc including petty materials like washers of all sizes, thread(shoot), M-seal, screws, nails to make water supply/ plumbing lines functional and leak proof. Note : Any item required to be replaced shall be paid under respective item and in that case this above item shall not be measured and paid.

S&F in repair pillar taps, fancy type chromium plated copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe of dia 15 mm all as specified.

S&F in repairs 15 mm stop valves, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe complete.

S&F in repairs 15 mm CP fancy type bib tap cast copper alloy with crutch or butter fly handle, scewed down, screwed for iron pipe or for brass ferrule and fixed complete.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 15mm dia.

S & F 20mm bore, 3- layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings complete all as specified and directed

S & F 25 mm bore, 3- layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long all as directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair C.P. grating 100mm square/round with or without hole.

S&F in repairs 32 mm dia PVC waste pipe for WHB complete all as specified

S&F in repairs 40 mm dia PVC waste pipe for sink, complete all as specified

S&F in repairs stainless steel sink with drainage board made of stainless steel 1.00 mm thick with rawl plug washers and waste pipe including bedding in cement mortar to dwaef wall or including fixing M S cantilever brackets of size 25mmx25mm x4mm thick and connecting union to pipe, overall size of 915 mmx460mm bowl size 410mx330mmx160mm complete all as specified and directed.

S&F in repairs stainless steel toilet paper holder fixed with wooden gutties and screws to wall surfaces all as directed.

S&F in repairs stainless steel soap tray fixed with wooden gutties and screws to wall surfaces all as directed.

S&F in repair water closet (Squat pattern) including lime concrete bedding, vitreous china long pan orissa pattern 580x440mm, white with integral foot rests (excluding flushing cistern & flush pipe) complete all as specified and directed.

S & F in repairs, vitreous china WHB white, flat back, size 550x400mm with brackets, inc. cutting for & pinning in ends of brackets, inc. waste fitting, PTMT 32mm dia and pillar taps of PTMT 15mm dia complete all as specified and directed.

S&F in repair 10 ltr capacity PVC valveless, syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connection to pipe but fixed complete all as specified.

Cleaning of water tank capacity 500 ltrs and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc complete all as specified and directed.

Cleaning of water tank capacity 1000 ltrs and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc complete all as specified and directed.

S&F in repairs EWC seat cover of any pattern including cover and Mild steel chromium plated hinging devices of any colour all as specified and directed.

S&F in repairs PVC water tank cover of any pattern and any colour all as specified and directed.

S&F in repairs health faucet, CP with flexible pipe of bore 15mm with necessary holder, screws and fasterens fitted to wall complete all as specified and directed.

Supply & fix in repair vitreous china wash down water closet pedestal pattern (EWC), White including connection to trap and to flushing pipe with ‘P’ or ‘S’ trap, making good to floor, plastic water closet seat cover with mild steel chromium plated hinges and Health Faucet with pipe complete all as specified

S & F in repairs brass CP mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F in repair for 500 ltrs capacity rotational moulded polyethylene water storage tanks 3 layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

S & F in repair 25 mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod &high density plastic ball screwed for iron pipe and fixed .(Minimum weight 15mm-142 gms/20mm -210 gms/25mm -455 gms/40 mm-690 gms)

S & F in repairs 125 mm size chromium plated brass shower rose with or without swivel joints and swivel arms for fixing with 15 mm dia bore pipe complete all as specified and directed.

S & F in repairs 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in walls or floors complete all as specified and directed

S & F in repairs 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in walls or floors complete all as specified and directed

M&L for preparation of new wooden surfaces of any description, not otherwise described over 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc. all as directed.

M& L Granite (of any type) work, 20 mm thick, (table rubbed and polished) in steps jambs, pillars, window cills, cooking platforms, and the like in cement mortar (1:4) including pointing in white cement (1;2) using marble dust with admixture of pigment to match with shade of granite including 10 mm thick screed bed in CM 1:4 all as specified and directed.

Repair to aluminium door or window of any size, shape and description including easing, cutting, drilling, including provn of parts such as rubber gasket, blanket cloth, etc to make door or window fully functional complete all as directed by Engr-in- Charge.

Demolition of brick work or stone masonry built in cement mortar including all quions, arches, pillars,etc but excluding ashlar facings, dressed stone work and precast concrete articles all as specified

M & L Brick work with sub class old size 'B' bricks straight or curved on plan exc 6m mean radius built in cm 1:6 all as specified and as directed

M & L precast cement concrete solid blocks exc 10 cm in width, built in cement mortar 1:6 type C1 1:3 :6 using 20 mm graded stone aggregate all as specified and as directed

M& L for stone masonary walling of random rubble un coursed well bonded bedded and solidly hearted built in CM 1:6 complete all as specified and as directed.

M & L for raised pointing to random rubble masonary, uncoursed or brought upto courses complete all as specified.

M & L for rendering 15 mm thick on fair faces of brick or concrete wall surfaces finished to even and smooth without using extra cement in CM 1:4 complete all as specified and directed.

M & L 25 mm thick precast cement concrete louvres and jallies,Type C-0, 1:3:6 (using 12.5 mm graded aggregate) measured solid including all moulding set in cement mortar 1:6 complete all as specified & directed

S&F TMT bars 6 to 8mm mm dia cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for PCC Coping in PCC 1:3:6 type C-1 using 20mm graded aggregate, chamfered edges etc including necessary formwork all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of weather coat paint over a coat of primer on plastered surfaces as on walls complete all as specified and as directed.

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for flooring hardsting etc complete all as directed.

M&L 75 mm thick PCC type D-2,1:4:8(using 40 mm graded stone aggregate) as in sub base of hard standing, flooring and paving etc complete all as specified and directed.

M & L Chequered cement concrete tiles 25 mm thick, any shape and size, set & jointed in neat cement slurry in floors with grey cement and pigments over and incl. 20mm thick screed bed in CM 1:4 complete all as specified and directed.

Demolition of Stone slabs /cement tiles etc of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar all as spd & directed.

M&L for 200 mm thick as in Granular sub base of kankar or laterite, spread, rolled and consolidated to gradient and camber required etc complete all as specified and directed.

Sand filling under floors including watering and consolidation complete all as specified & directed.

M & L Machine pressed precast concrete coloured interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-30 Grade with pigments complete all specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified.

Dismantling of posts or struts embedded in cement concrete, brick work etc (wood, steel or RCC) any section including taking out embedded portion and making good disturbed ground all as directed.

M&L for cement concrete type C2 1:3:6 (40 mm graded aggregate) as in foundation and mass concrete etc complete all as specified and as directed.

S&F Joist, channel, angle, or tee sections, fixed independently without connecting plates etc Fe 410 W Grade E- 250 complete all as specified and directed.

S&F framed works as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel, sheeting, or other covering, running rails and guides) and hanging also fastenings and fixing complete.

Dismantling old fencing wire mesh, any type complete all as specified

Supply only chain link galvanised over PVC coated , of mesh size 50 x 50 mm complete all as specified and directed by Engr in Charge.

Fixing only chain link fencing including line wires, any mesh, any type of standards, rails, straining bolts, etc. including provission of binding wire. complete all as specified and as directed.

S & F in repairs galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (Note: each line wire to be measured)

Supply and fixing in repairs crossed spiral concertina coil 610mm dia/ 1000 mm dia , made up of 2.6mm HTGS spring core wire having tensile strength of 1600 N/Sqmm and punched tape of 0.5 mm thick and 13 mm wide after crimming. punched tape shall be of hot dipped galvanised min 20 micron and having medium barbs of 24mm width @ 35mm centre to centre. Each concertina coil shall be of min 50 turns and 5 clips in two turns ( weight of coil 8 Kg to be stretched up to 6-8 mtr i e 1.14 Kg/ RM) complete all as spd & directed.

M & L preparation of new or previously untreated steel surfaces, of any description over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over red oxide zinc chrome priming complete all as specified and directed.

M & L for prepration of old wall surfaces and applying one coat of weather proof coat paint complete all as specified.

M&L for preparing old steel surfaces exceeding 10 cm width or girth and applying one coat of synthetic enamel paint including preparation of surface all as specified and directed.

Demolition of reinforced cement concrete as in cover slab of drain not exceeding 15 cm thickness all as specified

M&L for precast reinforced concrete 1:2:4 type B1 using 20 mm graded stone aggregate for cover slab set in and pointed in CM 1:6 including necessary formwork complete all as specified and directed.

S&F TMT bars 10 mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Dismantling of floor/ wall tiling including cement mortar bedding (but not backing) removing of unserveable tiles and rubbish of the premises complete all as specified and directed

M & L for 18 to 20 mm thick black granite (of any type) work (table rounded and polished) in gate pillars/ slabs/platforms etc, including15mm thick screed bed in CM 1:6 , pointing with white cement using admixter to match etc complete all specified and directed.

Cleaning of gulli trap/Nahani trap/floor trap with cleaning tools and getting out sludge, mud, silt or other foregin materials complete all as specified and as directed by Engineer in Charge. Note :- Obtained waste materilas shall be disposed of to a distance not less than 100 mtrs all as specified and as directed.

M&L for making good damaged surfaces of surroundings of nahani trap, Gulli trap/floor traps etc with CM 1:3 or white cement complete all as directed by Engineer in Charge.

Cleaning of septic tank / soak pits by removing man hole cover including removing of earth/soil spread over the cover if any, from the frame of a septic tank and receiving chambers, pumping out liquid contents and excavating night soil sediments and waste materials etc, clearing off up to the bottom floor and dispose off the materials excavated to contain night soil, place back the man hole cover to its original position. Disposal of the same shall be the responsibility of the Contractor. Disposal of waste shall be made in accordance with the regulations of authorities concerned without any extra expediture to the Government.Note:-The measurment shall be inclusive of water content from bottom of tank to the top level of water all as specified and directed

Opening manholes of septic tanks, removing night soil, other sediments, solid waste and liquid waste in any condition by septic tank cleaning vehicle, cleaning internal surfaces of the tank with clean water and refixing the manhole cover on completion of work complete all as specified and directed. Notes:- (a) The night soil, sediments, solid and liquid waste in any condition removed from septic tank shall be taken away from respective vicinities and premised in closed containers/converyance and disposed off out of Defence land. (b) Disposal of the same shall be the responsibility of the Contractor. Disposal of waste shall be made in accordance with the regulations of authorities concerned without any extra expediture to the Government.

Cleaning Man holes by removing man hole cover, dewatering and getting out sludge, deposit mud, silt or other foregin materials and vegetation and cleaning the sides and floors of the man hole, removing over flowed sulage from sorounding of man holes and removing the same outside the defence land including taking of manholes covers and refixing the same in position and testing of manholes by filling with water complete all as specified and as directed.Manhole depth n exc 1.5 Mtr depth.

All as per item No 120 above but for manhole depth exceeding 1.5m and not exceeding 3.00m complete all as specified and as directed.

Cleaning of SWG/PVC/CI pipe sewage line using mechanically compressor and removing foreign materials for 75mm dia pipe in vertical walls/floors complete all as specified and directed.

Cleaning of SWG/PVC/CI pipe sewage line using mechanically compressor and removing foreign material for 110mm dia pipe on vertical walls/floors complete all as specified and directed.

Cleaning of SWG/PVC/CI pipe sewage line using mechanically compressor and removing foreign material for 150mm dia pipe complete all as specified and directed.

M&L for PCC Coping in PCC 1:3:6 type C1 using 20mm graded aggrgate including chamfered edges all as specified and directed

M&L for rendering 15mm thick in CM 1:4 on on fair faces of brick work or concrete surface even and smooth using water proofing compound (WPC) & without using extra cement all as specified and as directed by Engr-in-charge.

Supply only liquid water proofing compound

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required including excavation and returning filling etc complete all as specified.

S & F in repairs 150 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in walls or floors complete all as specified and directed

M&L for cement concrete bed to drain pipe 150 mm dia in cement concrete 1:3:6 type C2 including packing under the haunching on sides all as directed and specified

Dhanyaconstructions (BID ID -3346042)