Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.9 LAccepted-AOC VPO KHIZRABAD PARTAPNAGAR YAMUNANAGAR | ₹3.9 L | L1 | Accepted-AOC L1 bidder |
| 2 | L2₹3.9 L+₹4,586 (1.18%)Rejected-AOC VILL BHAGERA P O MUJAFAT KALAN DISTT YAMUNA NAGAR | KURUKSHETRA | HARYANA | 136030 | ₹3.9 L+₹4,586 (1.18%) | L2 | Rejected-AOC L2 bidder |
| 3 | L3₹4.1 L+₹20,759 (5.35%)Rejected-AOC | ₹4.1 L+₹20,759 (5.35%) | L3 | Rejected-AOC L3 bidder |
| 4 | L4₹4.1 L+₹25,649 (6.60%)Rejected-AOC | ₹4.1 L+₹25,649 (6.60%) | L4 | Rejected-AOC L4 bidder |
| 5 | L5₹4.2 L+₹28,070 (7.23%)Rejected-AOC | ₹4.2 L+₹28,070 (7.23%) | L5 | Rejected-AOC L5 bidder |
Tender Value
₹4.1 L
EMD Value
₹9,685
Closing Date
1 Jun 2026, 12:00 pmClosed
VIKRANT SINGH
CE DCRTPP Yamuna Nagar
Construction of RCC barricade wall for prevention of movement of heavy mining vehicles on service roads at WYC HE Project, Bhudkalan
2026_HBC_523887_1
2026EB19B286 063A 4C0F 83BE 7B924BEEA58A711PGC
Open Tender
Civil Works
Works
45 days
BEGAMPUR NAINWALA BHUD KALAN
As per PQR of NIT
3 documents required · 3 mandatory
₹1,180
₹9,685
Yes
2 Jul 2026
23 May 2026
3 Jun 2026
23 May 2026
1 Jun 2026
23 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | HSR Item 4.12.1-Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge. 1. All kinds of soil | 45 | cum | 78 | ₹3,510 |
| 2 | HSR Item 6.1.4-Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 4. 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) | - | cum | 2,911 | - |
| 3 | HSR Item 6.14.1-Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) | 27 | cum | 4,374 | ₹1,18,098 |
| 4 | HSR Item 6.29.1-Centering and shuttering including strutting, propping etc. and removal of form work for : 1. Foundations, footings, bases for columns | 91.08 | Sqm | 155 | ₹14,117.4 |
| 5 | HSR Item 6.30.2-Centering and shuttering including strutting, propping etc. and removal of form for 2. Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. | 120.72 | Sqm | 282 | ₹34,043.04 |
| 6 | HSR Item 6.15.1-Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor four level, excluding cost of centering, shuttering, finishing and reinforcement : 1. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) | 18 | cum | 5,969 | ₹1,07,442 |
| 7 | HSR Item 6.33.6-Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level Note: Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. 6. Thermo-Mechanically Treated bars of grade Fe-500D or more | 1 | Kg. | 66 | ₹65.93 |
| 8 | HSR Item 6.34.6-Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect above plinth level Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. 6. Thermo-Mechanically Treated bars of grade Fe-500D or more. | - | Kg. | 68 | - |
| 9 | HSR Item 1.PM060-Hire charge of generator 3 KVA | 40 | Per Hour | 36 | ₹1,440 |
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.76 MB
BOQ_602834.xls
BOQ • 0.27 MB
CorrigendumRCCbarricadewall.pdf
PDF • 0.18 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .