Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹25.8 LAccepted-AOC BLOCK B WARD NO 34 SURYASEN COLONY HARI MANDIR ROAD PO SILIGURI TOWN PS NEW JALPAIGURI DIST JALPAIGURI W B PIN 734004 | DARJEELING | WEST BENGAL | 734004 | L-1 | Accepted-AOC Being L-1 | |
| 2 | L-2₹27.1 L+₹30,242.25 (1.13%)Rejected-Finance PO BINNAGURI PS BANARHAT DIST JALPAIGURI PIN 735203 W B | JALPAIGURI | WEST BENGAL | 735203 | L-2 | Rejected-Finance Being L-2 | |
| 3 | L-3₹28.1 L+₹1.2 L (4.64%)Rejected-Finance DEPOPARA PO BINNAGURI PS BANARHAT DIST JALPAIGURI WEST BENGAL PIN 735 203 | JALPAIGURI | WEST BENGAL | 735203 | L-3 | Rejected-Finance Being L-3 | |
| 4 | L-4₹30.5 L+₹3.7 L (13.9%)Rejected-Finance BIRPARA LANKA ROAD PO BIRPARA DISTT JALPAIGURI PIN 735204 | BIRPARA | JALPAIGURI | WEST BENGAL | 735204 | L-4 | Rejected-Finance Being L-4 | |
| 5 | L-5₹31.3 L+₹4.5 L (16.9%)Rejected-Finance GAIRKATA ROAD POST BINNAGURI PIN 735 203 DIST JALPAIGURI W B | JALPAIGURI | WEST BENGAL | 735203 | L-5 | Rejected-Finance Being L-5 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
10 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH BINNAGURI
GE North Binnaguri Post Binnaguri Dist Jalpaiguri West Bengal PIN - 735232
COMPREHENSIVE MAINTENANCE REPAIR TO CERTAIN BLDGS IN MINOR UNITS AND A INF BN IN NORTH ZONE UNDER GE NORTH BINNAGURI
2023_MES_597178_1
NIT No. 8701 / 05 / 2023-24 / 02 / E8
Open Tender
Civil Works
Item Rate
270 days
BINNAGURI
Class D Category a i
8 documents required · 8 mandatory
₹500
Yes
GE NORTH BINNAGURI
₹80,000
Yes
28 Jun 2023
20 May 2023
12 Jun 2023
20 May 2023
10 Jun 2023
3 Jun 2023
Amount
Taking down chowkats or frames exc 1.5 sqm but n.exc 4 sqm (without taking off shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc complete all as specified and as directed.
Taking down chowkats or frames n.exc 1.5 sqm (without taking off shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc complete all as specified and as directed.
Taking down shutters of any description exc 1 Sqm and n.exc 2.00 Sqm each and removing from site complete all as specified and as directed.
S& F factory made Pressed steel frames confirming to IS, having profile of size 125 x 60 mm, 1.25 mm thick MS Sheet for doors with one or more rebates including necessary fixing lugs, lock, strike plate, etc with one shop coat of zinc chromate primer including S&F 10mm size MS butt hinges complete all as specified and as directed.
S& F factory made Pressed steel frames confirming to IS, having profile of size 105 x 60 mm, 1.25 mm thick MS Sheet for doors with one or more rebates including necessary fixing lugs, lock, strike plate, etc with one shop coat of zinc chromate primer including S&F 100mm size MS butt hinges complete all as specified and as directed.
M&L for PCC type C-1, 1:3:6 using 20mm graded aggregate as in bed block for fixing of hold fast, filling concrete in frame filling, gaps in between glazed & fly proof steel window, cills, railing up to 60 cm in height etc including necessary form work complete all as specified and as directed.
S&F of Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour printed PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed.
M & L for factory made solid panel PVC plain colour door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat molded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side &as gap insert for top rail & bottom rail paneling of wood grain printed PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to gathers with solvent cement supplying & fixing the frame at site complete all as specified and as directed.
M&L for 2nd class hard wood for plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, in pieces for replacing one leg or certain portion of decayed portion without taking down chowkhat or frame by cutting existing length/portion complete including making good disturbed opening by rich mortar in CM 1:4 complete all as specified and as directed.
S&F of 35mm thick 2nd class hard wood factory made, plain, framed, paneled shutter (two panel) with lock rails and panel of 9mm BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces. The size of rail and style as per SSR Part-I, Section 8, Clause No 8.24 complete all as specified and as directed.
S&F of factory made 30 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both side etc complete all as specified and as directed.
S&F for factory made 35mm thick 2nd class hard wood gauged and skeleton shutter open rebated and prepared to received gauge etc (without sash bars) for fly proof door shutter, edges of framing plain, chamfered or rounded, fitted with cut of any mitred beads for securing gauge etc, size of members of shutter as specified in SSR Part-I section 8 clause No. 8.24 and fitted to chowkats complete all as specified and as directed.
Taking down of wooden door shutter of any description of area exceeding 1 sqm and n exc 2 sqm each complete all as specified and as directed.
Supply only mild steel butt hinges, medium weight cold rolled of size 100mm complete all as specified and as directed.
S&F of SS butt hinges, medium weight cold rolled of size 100mm complete all as specified and as directed.
S&F 150 mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed.
S&F 200 mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed.
Supply & fixing aluminium anodised extruded fabricated type handle of 150mm long complete all as specified and as directed.
S&F Aluminium alloy anodised sliding door bolt of 250 mm long with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed.
S&F door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.
S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and as directed.
S&F factory made pressed steel windows of standard size and section as shown on HQ CE Siliguri Zone Drg No CESZ/2018/TD-07, Sheet 1/3 to 3/3 with double shutter i.e glazed & wire gauged shutter including all fittings and fixture like MS hold fast, box hinges, handles, MS tower bolts, stoppers, MS guard bar/grill etc complete including one shop coat of anti corrosive zinc chrome primer complete all as specified and as directed. Notes:- (a) Rate quoted shall be deemed to be including of all fittings fixtures . (b) Glass, wire mesh and painting shall be measured and paid separately under relevant items of this schedule. (c) PCC (1:3:6) type C1 to be filled in chowkats frame and paid under relevant item of this schedule.
All as per Item No 22 here-in-before but with single shutter of glazed/wire gauged shutter including one shop coat anti-corrosive zinc chrome primer complete all as specified and as directed. Notes:- (a) Rate quoted shall be deemed to be including of all fittings fixtures . (b) Glass, wire mesh and painting shall be measured and paid separately under relevant items of this schedule. (c) PCC (1:3:6) type C1 to be filled in chowkats frame and paid under relevant item of this schedule.
Supply and fixed in repairs factory made steel ventilator top hung shutter including hinges, steel peg stay , fixing lugs etc complete with or without glazing bars including one shop coat of zinc chrome primer compete all as directed.
M&L for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.
M&L for preparation of new or previously untreated steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.
M&L for preparation of new primer applied steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of new or previously undecorated wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of Pink primer complete all as specified and as directed.
Hacking out old broken unserviceable glass panes (any thickness, size, quality or description) for metal frame including punching or drilling out old glazing pins/spring clips and providing & fixing new one complete all as specified and as directed.
S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed.
S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and as directed.
M&L for 5.5mm thick sheet glass ordinary quality and glazing in square exc. 0.5 Sqm in each pane as in door & windows including supplying and fixing of necessary aluminium cleats, rubber gaskets etc and making good complete all as specified and as directed.
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with SS wire staples complete all as specified and as directed.
S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with SS wire staples complete all as specified and as directed.
Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.
M&L for brick work with fly ash bricks old size straight or curved on plain exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.
M&L for brick work with serviceable bricks obtained from demolition, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed. Note: The serviceable bricks obtained from demolition shall be reused.
Taking down cement plaster on wall of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M&L for 20 mm thick plaster of cement mortar (1:4) rendering on fair faces of brick work in two layers (10mm & 10mm) mixed with water proofing compound in top layer at the rate of 200 ml per beg of cement or as per manufacturer's instructions finishing the surface fair and even without using extra cement complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately.
M&L for rendering 5 mm thick cement plaster on ceiling surfaces with cement mortar (1:3) complete all as specified and as directed.
M&L 15mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surface finished fair and smooth (without using extra cement) complete all as specified and as directed.
Supply only liquid water proofing compound complete all as specified and as directed.
M&L for preparation of newly plastered surface of wall and applying two coats of colour/white wash to match the colour of existing adjacent surface complete all as specified and as directed.
M&L for preparation of newly ceiling plastered surfaces and applying three coats of white wash on wall complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises including taking down cement plaster complete all as specified and as directed.
M&L for non skid coloured joint free ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but n. exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in white or coloured cement to match as in floor complete all as specified and as directed.
M&L for coloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in whiter or coloured cement to match complete all as specified and as directed.
M&L for chequered tiles of size 300 mm x 300 mm x 25mm thick, set, jointed and pointed in neat cement slurry in floors including 15mm thick screed bed or bedding layer in cement mortar (1:6) pre-polished and chemically treated smooth finish exterior grade coloured chequered tile as in path complete all as specified and as directed.
M&L for glazed ceramic coloured tiles in vertical surface of size 300x600x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed white or colour cement to match complete all as specified and as directed.
M&L for vitrified ceramic tiles 7 to 8mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors/skirting etc. set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor/skirting and pointed in white or coloured cement to match complete all as specified and as directed.
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces to receive a wall tiles using cement mortar 1:4 complete all as specified and as directed.
M&L for Machine cut kota stone slab flooring 15-20 mm thick over 15 mm thick cement screed bed using cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (mirror finish) complete all as specified and as directed.
M&L for Machine cut kota stone as in riser/skirting 15-20 mm thick over 10 mm thick rendering using cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed.
Demolition of cement concrete (un-reinforced ) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
Material & labour for PCC (1:3:6) Type C-2 (40mm graded aggregate) as in plinth protection including finishing the concrete surface even and smooth w/o using extra cement complete all as specified.(Note: The unit rate quoted shall be deemed to include for providing the concrete in alternate bays n exc 3 mtr long with 12 mm wide and 50 mm deep joint between the bays which shall be filled with mastic filling with hot bitumen 85/25 and 1:2 mix by volume.)
M&L for 75 mm thick cement concrete type D2, 1:4:8 using 40 mm graded crushed stone aggregate as in sub base to flooring etc similar works complete all as specified and as directed.
Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 15 mm bore complete all as specified and as directed.
S&F of Tubes, medium grade, 15mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and as directed.
Refixing of old steel tubing and connections in new or old position (wall, ceiling, floors, etc) of 15 mm bore complete all as specified and as directed. Note : The serviceable GI tube obtained from taking down shall be reused.
M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing etc., and making good, cutting not exceeding 10 cm girth in brick walls complete all as specified and as directed.
Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 20 mm bore complete all as specified and as directed.
S&F of Tubes, medium grade, 20 mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and as directed.
Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc complete all as specified and as directed. Note : The serviceable GI tube obtained from taking down shall be reused.
Dismantling water tank exc 250 & n.exc 1000 ltr capacity and removing to store complete all as specified and as directed.
Supplying & fixing of PVC water storage tank 500 ltr capacity HDPE double layered, cylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet of 20 mm GI Pipe connection including locking arrangement, including supplying & fixing of Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe 20 mm dia and (Minimum weight 20 mm - 210 gms) complete all as specified and as directed. Note : GI inlet, outlet & wash out pipe will be measured and paid separately.
Supplying & fixing of PVC water storage tank 1000 ltr capacity HDPE double layered , cylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet of 20 mm GI Pipe connection including locking arrangement, including supplying & fixing of Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe 20 mm dia and (Minimum weight 20 mm - 210 gms) complete all as specified and as directed. Note : GI inlet, outlet & wash out pipe will be measured and paid separately.
S&F in repair of ball valves of 20mm bore high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed (Minimum weight 20 gms-210 gms) complete all as specified and as directed.
S&F in repairs 15 mm dia chromium plated bib taps brass chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.
S&F in repair 15mm dia concealed stop cock CP, cast copper alloy fancy type with long shank and cup for 15mm iron pipe complete all as specified and as directed.
S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.
S&F in repair 15mm bore Stop cock of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) complete all as specified and as directed.
S&F in repairs of swivel shower of PTMT any coloured for fixing with 15mm pipe (Minimum weight 40 gms) complete all as specified and as directed.
S&F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm including CP waste coupling, PVC connection 450 mm long, waste pipe & removing the existing Basin, cutting for and pinning ends of brackets or erecting stand complete all as specified and as directed.
S&F in repairs 15 mm bore pillar taps brass chromium plated, capstan head, screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.
S&F vitreous china squatting pan "Orissa" pattern size 580x440mm white with integral foot rests(excluding flushing cistern and flush pipe) with 'P' or 'S" trap from or back inlet etc including connection to trap and flushing pipe and provision of cement concrete bedding in repairs including demolition of existing one complete all as specified and as directed.
S&F in repairs vitreous china wash down water closet pedestal pattern white excluding fixing bolts, flushing cistern and flush pipe complete but including PVC seat cover with aluminium/PVC hinging devices & EWC Jet chromium plated with 1.00 mtr long PVC connection pipe etc complete all as specified and as directed.
Supply & fixing in repair PVC low level flushing cistern 10 ltr capacity sleek type having weight not less than 1.80 KG including PVC bend, supporting brackets with all accessories white colour complete all as specified and as directed.
S&F in repair Vitreous China Urinal, Half stall type, white with flush pipe,connecting pipe & waste pipe, CP urinal spreader complete all as specified and as directed.
S&F in repair Vitreous China Urinal partition white of size 310 x 700 mm complete all as specified and as directed.
S&F in repair 15 mm dia brass chromium plated angle cock with flange complete all as specified and as directed.
S & F grating doom 125mm dia with waste hole of PTMT (min wt 40 gms) complete all as specified and as directed.
Taking down PVC/AC pipe of any dia and any description including all fittings complete all as specified and as directed.
S&F 110 mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall or laid in floors complete all as specified.
S&F 75 mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall or laid in floors complete all as specified.
S&F 110mm dia PVC SWR bends of any radius with out access door complete all as specified.
S&F 110mm dia PVC (SWR) junction single 'T' equal or unequal with access door Complete all as specified.
S&F 110mm dia PVC (SWR) branch piece, single ‘Y‘ equal or unequal Complete all as specified.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
M&L for RCC type B1 (1:2:4) using 20 mm graded stone aggregate in fins, fascias, louvres, parapets, chajja/sunshade, shelves and railings , newels, balustrade & the like complete all as specified and as directed.
Formwork to Fins, fascias, louvres, parapets, chajja/sunshade, shelves and railings , newels, balustrade & the like for fair finished surfaces of concrete flat complete all as specified and as directed.
M&L for mild steel TMT bars 6mm to 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and as directed.
Taking down tarfelt with cement plaster from roof surfaces and lowering and removing the same to a distance exc. 50m and n. exc. 100m including roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and as directed .
M&L for 10mm thick screed bed or bedding layer in cement mortar (1:4) mixed with WPC in order to maintain proper slope over existing roof surfaces for laying APP base polymeric membrane, finished even and smooth without using extra cement complete all as specified and as directed.
M&L for providing, cement concrete type B1 1:2:4 using 20 mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges, padding to roof etc complete all as specified and as directed.
M&L for water proofing treatment to RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top :- (a) Applying bituminous primer @ 0.4 ltrs per Sqm over plastered surfaces of roof including parapet surface. (b) Over the priming coat laying one layer APP based polymembric membrane of approved manufacturer 3 mm thick weight not less than 3.6 Kgs per Sqm reinforced with non woven polyester fabric weight not less than 150 gms per Sqm. Polymeric membrane shall be taken to a height of 60cm (min) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. Notes :- (i) Laying APP based polymeric membrane shall be done torch on method or as per manufacturer's instructions. (ii) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturer's instruction. (iii) Applying two coats of Aluminium paint over APP membrane. (iv) The rate including cutting groove in brick wall 75 mm wide and 65 mm deep and sopping horizontal face of groove with cement mortar 1:3.
S&F Powder coated aluminium window sliding type three track (2 glazed & one gauze shutter ) aluminium sections weighing not less than 1.67kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazing cleats, rubber packing, screws, handle, locking arrangement and 5.5mm thick plain/tinted glass and aluminium mosquito proof gauge including taking down of old existing steel window and making good disturbed surface of wall complete all as specified and as directed.
M&L for preparation of old decorative surface of wall and applying two coats of colour/white wash to match the colour of existing surface all as specified as directed.
M&L for washing, rubbing down and scraping of old decorated surfaces of ceiling surfaces for applying one coat of white wash complete all as specified and as directed.
M&L for washing, rubbing down and scraping of old decorated surfaces of wall surfaces for applying one coat of white/colour wash on wall complete all as specified and as directed.
Taking down Wall paneling and similar work complete all as specified and as directed.
S&F Solid PVC Wall Lining consisting of 5mm thick Single Side Prelam colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and as directed.
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed.
M&L for water proofing treatment to sunken floor with the following course of treatment/ specification:- (i) Cleaning top surface of floors /slabs and laying 50 mm thick (avg) PCC of grade M10 (Nominal mix), mixed with WPC as per manufacturer's instruction laid in slope 1:20 towards spouts including coveting corners (ii) 15 mm thick plastering in CM (1:4) on sides mixed with WPC as per remanufacturer's instruction. (iii) Applying 1st layer of slurry @ 0.488 kg / sqm mixed with acrylic based polymer modified cementious compound @ 0.253 kg /sqm This layer shall be allowed to air cured for 4 hrs. (iv) applying 2nd layer of slurry @ 0.242 kg/sqm mixed with acrylic based polymer modified cementenous compound @ 0.126 kg/smithies layer shall be allowed to air cured for 4hrs followed with water curing for 48 hrs.(v) Applying a coat of industrial bitumen 85/25 penetration @ 1.50 kg/sqm on plastered and concrete surfaces (vi) Providing 150 micron thick polyutethene paint in two coats (each of 75 micron measured dry on dry surface over a coat of PU primer including preparation . (Make of PU primer - Dek guard EP -302 of M/S Fosroc or equivalent approved brand. Make of PU paint - Deck guard PUor equivalent approved brand. (vii) 2 Nos 32mm bore GI medium grade 450mm long spout ,to be provided through external wall to drain out accumulated water.(vii) Sunken floor shall be tested for water tightness by filling water for 72 hrs before and after treatment work is carried out and ensure that no leakage /seepage exists (ix) Sunken portion shall be filled with lean concrete of grade M7.5 stone aggregate
S& F 25 mm dia PVC coated MS curtain rod with require brackets, decorative piece on ends with teak finish appearance as in repairs complete all as specified and as directed.
Demolition of wall and ceiling board (Fibre,pulp,insulation etc.) or insulation board /slab/blankets any thickness including cover fillet complete all as specified and as directed.
Supply & fixing false ceiling with Gl powder coated frame work and 4 mm thick,(E-board) non asbestos fibre reinforced cement board, reinforced design board tiles conforming to IS-14862,of approved texture at a height duly suspended ceiling laid on hot dip galvanised iron imposed Grid of size 600 mm x600 mm ,T section/ Angle section including cutting holes in brick wall and making good surface with cement concrete 1:2:4 type B-0/1:3 cement mortar complete all as specified and having following details:- (a) 27mm x 27mm angle 0.55 mm thickness,GI powder coated hot dip glvanised plugged at the rate 600mm centre to center alongwith te perimeter of wall. (b) 25 mm x 25 mm Tee 0.55 mm thickness,GI powder coated hot dip galvanised as main and cross runner suspended with 1.6 mm dia GI wire suspenders (not exc 1.2 mtr length) with adjustable clamps and dash true fasteners plugged in RCC slab or angle iron runner of slopped roof placed at the rate 600 mm centre to centre along with the perimeter of wall.
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.
Dismantling mild steel work of any description not otherwise provided for complete all as specified and as directed.
S&F of rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantry, rails, fastening, heavy bracket framing (Beam, tee, angle, channel or flat section,Tube etc), including distance pieces, cleats etc. conforming to Fe - 410- W including cutting, welding & necessary fittings such as nut bolt, plate etc complete all as specified and as directed.
S&F for pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F in repair CP health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.
Supply and fixing for brass chromium plated fancy type towel ring square fixed etc complete all as specified and as directed.
Supply and fixing for brass chromium plated fancy type towel rail 600 mm long complete all as specified and as directed.
M&L for dismantling/demolition of RCC fins/parapets of any size incl. cutting down rusted reinforcement and making good with CM 1:3 and provided drip course 25 mmx10 mm deep with CM 1:3 at edges of RCC slab/chajjas etc complete all as specified and as directed.
INTERNAL ELECTRIFICATION Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten/ conduit/ gutties/ wooden boards/ switches/ sockets/ regulators/ light fittings etc and separating the serviceable items like fan regulators and light fittings for re-use under respective items and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing complete all as specified and as directed.
Taking down the existing unserviceable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.
Taking down the existing unserviceable sub main wiring of any type / description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.
M&L for concealed conduit point wiring with 1.5 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core copper cable working voltage 1100 volts grade conforming to IS-694 with stranded copper conductor in and including PVC conduit of adequate size with all accessories (including cutting chases & making good the disturbed surface to its original specification) including MS sunk box, 3mm thick hylum sheet top cover fixed by means of brass machine screw and cap washer including size 1.5 sq mm (nominal cross sectional area) PVC insulated unsheathed single core multistranded copper conductor cable as earth continuity conductor connected to main switches/DB's or common earth dolly for one light point controlled by one, one way switch complete all as specified and as directed.
Description all as per item No 121 here in before but for one Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator complete all as specified and as directed.
Description all as per item No 121 here in before but for one 3 point 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and as directed.
Description all as per item No 121 here in before but for one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified and as directed.
Description all as per item No 121 here in before but for light point controlled by two way switch Amps complete all as specified and as directed.
Description all as per item No 121 here in before but for one bell point controlled by one, bell switch 5 Amps complete all as specified and as directed.
Description all as per item No 121 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point incl running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and as directed.
S & F switch piano single pole flush type 5 amps, 230 volts one way complete all as specified and as directed.
S & F switch piano single pole flush type 5 amps, 230 volts two way complete all as specified and as directed.
S & F bell push flush type 5 amps, 230 volts.complete all as specified and as directed.
S & F socket combination flush type multipurpose 2/3 pin 5 amps 2 in 1, 230 Volts complete all as specified and as directed.
S & F switch socket combination flush type multipurpose 2/3 pin 5 amps 2 in 1 230 Volts complete all as specified and as directed.
S & F switch socket combination 2 in 1 multipurpose 3/5 pin 5/15 amps flush type complete all as specified and as directed.
S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified and as directed.
S & F ceiling fan regulator step type, flush type heavy duty suitable to work on 230 volts Ac supply complete all as specified and as directed.
S & F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with PVC round/square blocks complete all as specified and as directed.
S&F in repair switch piano single pole flush type 5 amps, 230 volts including removal old existing unsv one complete all as specified and as directed.
S&F in repair socket combination flush type multipurpose 2/3 pin 5 amps 2 in 1, 230 Volts all as specified including removal old existing unsv one complete all as specified and as directed.
S&F in repair switch socket combination flush type multipurpose 2/3 pin 5 amps 2 in 1 230 Volts all as specified including removal old existing unsv one complete all as specified and as directed.
S&F in repair switch socket combination 2 in 1 multipurpose 3/5 pin 5/15 amps flush type including removal old existing unsv one complete all as specified and as directed.
S&F in repair ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm including removal old existing unsv one complete all as specified and as directed.
S&F in repair ceiling fan regulator step type, flush type heavy duty suitable to work on 230 volts Ac supply including removal old existing unsv one complete all as specified and as directed.
S&F in repair lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with wooden round blocks including removal old existing unsv one complete all as specified and as directed.
S&F in repair call bell suitable to work on 230 volts Ac supply including removal of old unsv call bell complete all as specified and as directed.
S&F in replacement LED Lamp 9/10 Watt with B 22 base complete all as specified and as directed.
S&F in replacement LED Lamp 20 Watt with B 22 base complete all as specified and as directed.
S & F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnetic locking system complete including taking down of old unsv sheet metal enclosure complete all as specified and as directed.
S & F sheet metal enclosure MCB DB TPN 4 way with 200 amps rated bus bar 415 volts double door with magnetic locking system complete including taking down of old unsv sheet metal enclosure complete all as specified and as directed.
S & F MCB TPN 415 volts suitable for fixing in MCB DB of capacity 40 / 60 amps complete all as specified and as directed.
S & F MCB SPN 230 volts suitable for fixing on MCB DB of capacity 6 to 30 Amps complete all as specified and as directed.
S & F MCB SP 6 to 30 Amps 240 volts for fixing on MCB DB's complete all as specified and as directed.
M&L for sub main wiring with 2 run of 6.00 sqmm (nominal cross-sectional area) PVC insulated unsheathed single core FRLS cable of working voltage 1100 volts grade with stranded copper conductor including one run of 6.00 Sqmm (nominal cross sectional area) PVC insulated unsheathed cable with stranded copper conductor as continuous earth wire connected to common earth dolly drawn in PVC rigid non- metallic concealed conduit all as specified and as directed. Note : Two runs of sub main wiring cable along with one run of earth wire with and including 25 PVC conduit pipe shall be measured as one unit length.
All as per item No 152 above but using two run 4.0 Sqmm multistranded copper conductor single core cable with one run 4.00 sqmm multistranded copper conductor single core cable as earth wire complete all as specified and as directed.
M&L for SPN enclosure with two pin and earth plug and socket with 240 volts 20 Amp SPN MCB including removal old unsv one complete all as specified and as directed.
S&F IP 20, class I, LED light 1X18 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified and as directed.
S & F Energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete incl removal of old unsv fitting complete all as specified and as directed.
S&F IP 20, Class I, LED Mirror light fitting 1 x 9 W, (or nearest next higher wattage) 5700 K, wall /Surface mounted with aluminium housing 2 feet long, integrated type, with high efficiency PMMA diffuser, integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/square blocks, screws etc complete including 01 No 10 W LED lamp with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size including necessary taking down the old unserviceable fitting complete all as specified and as directed.
S&F bulk head luminaire with B22 base holder suitable for 9 Watt LED inverter type bulb light IP66 grade, with and including 9 watt LED (or nearest next higher wattage) lamp (LED Bulb with B22 base 900 Lumens in normal mode and 450 lumens in power back up mode, charging time 8-10 Hrs and around 4 Hrs Power backup with inbuilt surge protection of 3 KV) (or nearest next higher wattage) and connecting up with and including PVC insulated 3 core of size 0.75 Sqmm copper conductor from ceiling rose to terminal block of light fitting including necessary taking down the old unserviceable fitting complete all as specified and as directed.
S & F Post top lanterns 15 watt LED light fitting ,new generation, energy saving, environmental friendly, longlife with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source, spun aluminium canopy, with opal/clear acrylic diffuser and complete with all accessories internally prewired including connecting up with three core twisted flexible copper conductor cable up to ceiling rose and necessary mounting arrangements complete all as specified and as directed.
S&F in repair hylam sheet 3 mm thick white in colour of size 130 mm x 180 mm including taking down existing unserviceable complete all as specified and as directed.
S&F in repair hylam sheet 3 mm thick white in colour of size 120 mm x 170 mm including taking down existing unserviceable complete all as specified and as directed.
S&F in repair hylam sheet 3 mm thick white in colour of size 230 mm x 280 mm including taking down existing unserviceable complete all as specified and as directed.
S&F in repair hylam sheet 3 mm thick white in colour round type of size 80 mm dia including taking down existing unserviceable complete all as specified and as directed.
MESSRS SEN BROTHERS
M/S MOHAN KUMAR BANSAL
S.N. GHOSH AND CO.
M/S VIRENDRA KUMAR SINGH
M/S SINHA ENTERPRISE
R K AGARWAL
SG ENTERPRISE
M/s. MD IRSHAD
M/S MAJUMDER CONSTRUCTION
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .