E Tender No 07/EDC(K)/2022-23

Supply Item

Supply of Stay Clamp for PCC Pole made of M.S. Flate Size 50x6 mm duly Red Oxide Painted with Fitted 18m dia hole for 65x16 mm nut and bolts and washer without cracks & burrs. (As Per Specification & Drawing of UPCL)

Supply of M.S. Half Clamp for PCC Pole made of M.S. Flate Size 35x5 mm duly Red Oxide Painted with Fitted 18m dia hole for 65x16 mm nut and bolts and washer without cracks & burrs for Fixing of LT Distribution box. (As Per Specification & Drawing of UPCL)

Supply of M.S. Clamp for PCC Pole made of M.S. Flate Size 35x5 mm duly Red Oxide Painted with Fitted 18m dia hole for 65x16 mm nut and bolts and washer without cracks & burrs for Fixing of Box Bottom Side. (As Per Specification & Drawing of UPCL)

Supply of M.S Clamp for PCC Pole made of M.S. Flate Size 50x6 mm duly Red Oxide Painted with Fitted 18m dia hole for 65x16 mm nut and bolts and washer without cracks & burrs for Dead End Clamp. (As Per Specification & Drawing of UPCL)

Supply of M.S Clamp for PCC Pole made of M.S. Flate Size 50x6 mm duly Red Oxide Painted with Fitted 18m dia hole for 65x16 mm nut and bolts and washer without cracks & burrs for Suspension Clamp.(As Per Specification & Drawing of UPCL)

Supply of SMC Three Phase L.T. Distribution Box for connection of LT consumer With in built Panel Lock with key, Al bus bar RYB 25x6 mm & Al bus bar N 40x6mm. MAKE- (SINTEX/Other IS Complied Reputed Company)

Supply of Shear Head type Insulated Piercing Connector body moulded from high quality mechanical Climate and UV resistant glass reinforced polyamide hot dipped galvanized bolts & contact teeth ABC size 120 Sq mm to 120 Sq mm/95 sq mm. MAKE- (TYCO/RPG/3M/SICAME/ENSTO)

Supply of Shear Head type Insulated Piercing Connector body moulded from high quality mechanical Climate and UV resistant glass reinforced polyamide hot dipped galvanized bolts & contact teeth ABC size 120 Sq mm to 25/16 Sq mm MAKE- (TYCO/RPG/3M/SICAME/ENSTO)

Supply of Shear Head type Insulated Piercing Connector body moulded from high quality mechanical Climate and UV resistant glass reinforced polyamide hot dipped galvanized bolts & contact teeth ABC size 16 Sq mm to 4/6 Sq mm MAKE- (TYCO/RPG/3M/SICAME/ENSTO)

Supply of Dead End Clamps With I Hook. (As Per Specification & Drawing of UPCL)

Supply of Suspension Clamps With I Hook. (As Per Specification & Drawing of UPCL)

Supply of L.T. Bare Neutral Connectors PG Clamp 95 sq mm to 25 sq mm single bolt.(As Per Specification & Drawing of UPCL)

Supply of L.T. Bare Neutral Connectors PG Clamp 95 sq mm to 95 sq mm double bolt.(As Per Specification & Drawing of UPCL)

Supply of Aluminum Lugs 'O' type size 25 mm for connecting PVC cable 4x25 sq mm.(As Per Specification & Drawing of UPCL)

Supply of Aluminium Lugs 'O' type Size 95/120 mm for connection LT AB Cable to T/F.(As Per Specification & Drawing of UPCL)

Aerial Bunch Cable Laying Work

Cartage of PCC Pole by private truck from store centre Rudrapur /Haldwani/ Kashipur to dump store approx. distance 5 to 80 Km. including loading into truck and unloading at work site.

Cartage of SP SP-55 Pole by private truck from store centre Rudrapur /Haldwani/ Kashipur to dump store approx. distance 5 to 80 Km. including loading into truck and unloading at work site.

Head Load Cartage of PCC Pole From dump Store to work site approx. distance 5 Km. including loading and unloading.

Head Load Cartage of ST Pole SP-55 From dump Store to work site approx. distance 5 Km. including loading and unloading.

Cartage of Small line materiral by private truck from store centre Rudrapur /Haldwani/ Kashipur to dump store approx. distance 5 to 80 Km. including loading into truck and unloading at work site.

Head Load Cartage of Small Line Material From dump Store to work site approx. distance 5 Km. including loading and unloading.

Erection of Single spport of PCC Pole after digging of pit size 0.6×0.6 mtrs & 1/6 length of support on 300×300×75 mm stone pad including fixing with all accessories complete in all respect as per Specification of UPCL.

Erection of Single support of ST SP-55 Pole after digging of pit size 0.6×0.6×1/6 length of support on 300×300×75 mm stone pad and grouting of pole in CC ratio 1:3:6 & making round kicking block of size (Height 0.45 & 0.45 round) above ground level fixing all accessories with complete work as per Specification of UPCL.

Fixing of Grouting of stay set complete as per RESPO drawing no. RES-16 with stay rod 16×1800 mm stay wire 7/10 SWG including excavation of earth and grouting of stay in pit with CC 1:4:8 in bottom of pit in size 0.60×0.60×0.60 mtrs, including cost of cement, sand and stone ballast etc. fixing of all accessories complete in all respect as per Specification of UPCL.

Labour Charges For Single Phase of Disconnection & Re-Connection of Following L.T.Consumer Service Connection.& Shiffting of energy meter From Consumer Premises as per norms of UPCL to outside of Premises.

Labour Charges For Three Phase of Disconnection & Re-Connection of Following L.T.Consumer Service Connection.& Shiffting of energy meter From Consumer Premises as per norms of UPCL to outside of Premises.

Fixing of M.S. earthing rod 20×2500 mm for earthing of support as per RESPO drawing No. RES-12 including digging earth rod 2.5 m deep below ground level connected to support with earth wire 7/16 swg fixing of all accessories complete in all respect as per Specification of UPCL.

Dismantling of 3 Phase 4 wire Old ACSR Conductor from Existing LT Line including Re- rolling back its conductor,wire,clamp, insulator, any other wire or items etc.including stacking and transportation of material to the UPCL Central stores 2-40 Km.

Dismantling of 2 Phase 3 wire Old ACSR Conductor from Existing LT Line including Re- rolling back its conductor,wire,clamp, insulator, any other wire or items etc.including stacking and transportation of material to the UPCL Central stores 2-40 Km.

Dismantling of 1 Phase 2 wire Old ACSR Conductor from Existing LT Line including Re- rolling back its conductor,wire,clamp, insulator, any other wire or items etc.including stacking and transportation of material to the UPCL Central stores 2-40 Km.

Laying,Stringing and sagging of LT A.B Cable size (3x120+1x95) including Fixing of Insulated Piercing Connector,Dead end Clamps With I Hook, Suspention Clamp,Holding Clamps, etc. complete in all respect as per Specification of UPCL.

Laying and Fixing Insulated Cable 4x25 sq mm insulated lead.

Fixing of L.T. Distribution Box in all respect.

Fixing of Dead End Clamp with M.S Clamp.

Fixing of Suspension Clamp with M S Clamp.

FIxing of Shear Head type Insulated Piercing Connector for Line to Line taping 120/95 Sq mm to 120/95 Sq mm

FIxing of Shear Head type Insulated Piercing Connector for Line to Box taping 120/95 Sq mm to 16/25 Sq mm

FIxing of Shear Head type Insulated Piercing Connector for Line to Box taping 16 to 4/16 Sq mm.

Fixing of L.T. Bare Neutral Connectors PG Clamp 95/70 sq mm to 95/70 sq mm.

Fixing of L.T. Bare Neutral Connectors PG Clamp 95/70 sq mm to 25/16 sq mm.

HIMALAYA BUILDCON