Comprehensive Annual Operation, Maintenance and Providing Civil and Electrical Maintenance (including Facility Management Services) for Residential complex and office at NCL HQ Singrauli for a period of Two Years

Part (A) Building Maintenance : Civil Work

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil anddisposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

1:3:6 ( 1 cement:3 coarse sand: 6 graded stone aggregate 20 mm nominal size )

Providing, hoisting and fixing above plinth level upto floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but, excluding cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size ).

Steel reinforcement for R. C. C. work including straightening, cutting, bending, placing in position and biding all complete upto plinth level. Cold twisted bars

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels -Granite of any colour and shade Area of slab over 0.50 sqm

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately Kiln seasoned and chemically treated hollock wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge Kiln seasoned and chemically treated hollock wood 30 mm thick shutters

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :Kiln seasoned and chemically treated hollock wood

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters

30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Kiln seasoned and chemically treated hollock wood

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete 250x16 mm

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 300x16 mm

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete

Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6mm for diagonal braces and central cross piece

Welding by gas or electric plant including transportation of plant at site etc. complete

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete 40 mm thick with 20 mm nominal size stone aggregate

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes.110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

Bend 87.5 110 mm bend

Single tee with door 110x110x110 mm

Shoe (Plain) 110 mm Shoe

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length,including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete.110 mm

12 mm cement plaster of mix :

1:4 (1 cement: 4 fine sand)

1:6 (1 cement: 6 fine sand)

6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand)

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm

Renewal of old putty of glass panes (length)

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge In cement mortar

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Wash basin size 550x400 mm with a single 15 mm C.P. brass pillar tap

Providing and fixing white vitreous china water closet squatting pan (Indian type) : Orissa pattern W.C. pan of size 580x440 mm

Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete 10 litre capacity - White

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Flexible pipe

32mm dia.

40mm dia.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete

Providing and fixing 100 mm CP grating for gully trap.

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete

Providing and fixing toilet paper holder : C.P. brass

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : For 100 mm dia pipe

Providing and fixing plain bend of required degree. 100 mm dia Sand cast iron S&S as per IS - 1729

Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100x100x100 mm Sand cast iron S&S as per IS - 1729

Providing and fixing heel rest sanitary bend 100 mm dia Sand cast iron S&S as per IS - 1729

Providing and fixing single equal plain junction of required degree 100x100x100 mm Sand cast iron S&S as per IS - 1729

Providing and fixing CP Waste Coupling for wash basin and sink, of approved quality and colour.Waste coupling 31 mm dia of 79 mm length and 62mm breadth.

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

20 mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :25 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore 15mm nominal bore

White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap

Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade: Old work (one or more coats)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Applying priming coat : With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:

One or more coats on old work

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Carriage of materials by mechanical transport including loading unloading and stacking

Lime, moorum, building rubbish lead 1 km

Earth Lead - 1 Km

Providing and fixing aluminium hanging floor door stopper, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper

Providing and fixing CP towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand)

Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore, 86 mm long, weighing not less than 88 gms

Providing and fixing skirting with Pre-laminated (one side decorative and other side balancing lamination) flat pressed 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete : 18 mm thick

Taking out existing wooden door / window shutter, repair by cutting, painting etc. and refixing of repaired door/window shutters to existing door/window frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required :

15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

40 mm nominal bore

Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes ( withen 50 metres lead ) as per direction of Engineer-in-charge. Internal work - Exposed on wall.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x460 mm bowl depth 200 mm

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer-in-charge. 15 mm nominal dia

Providing and fixing aluminium U beading of required size to Pre-laminated / flush door shutter, including fixing etc. complete as per direction of Engineer-in-charge.

Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading

Labour rate for fixing G.I. pipes complete with G.I. fittings and making good the walls etc. Internal work - Exposed on wall 15 mm dia nominal bore

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete 25 mm thick with 20 mm nominal size stone aggregate.

PART - B

Petty carpentary repair works such as repairing of cupboard, nails screw fixing hinges tightening of doors and windows shutter etc. as & when required as per instruction of EIC.

Labour rate for small petty water supply repair work such as fixing of washer in bib cock, stop cpck, adjusting of foot valves of cistern, fixing of water supply fitting such asGI nipple, socket, tee, plug, union, elbow etc. as and whenrequired as per instruction of EIC.

PART -C

Brick work with ( non modular ) FALG bricks conforming to IS:12894, of class designation 7.5 average compressive strength etc. complete in all respect in foundation and plinth in cement mortar 1:6 ( 1 cement : 6 coarse sand )

Brick work with ( non modular ) FALG bricks conforming to IS:12894, of class designation 7.5 average compressive strength etc. complete in all respect in superstructure above plinth level upto floor V level in all shapes and sizes in cement mortar 1:6 ( 1 cement : 6 coarse sand )

Half brick masonry with ( non modular ) FALG bricks conforming to IS:12894 , of class designation 7.5 average compressive strength etc. complete in all respect in foundation and plinth in cement mortar 1: 4 ( 1 cement : 4 coarse sand )

Half brick masonry with ( nonmodular ) FALG bricks conforming to IS:12894 , of class designation 7.5 average compressive strength etc. complete in all respect in superstructure above plinth level upto floor V level in all shapes and sizes in cement mortar 1: 4 ( 1 cement : 4 coarse sand )

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

Two coats

Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete :

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Providng and fixing hand shower (health faucet) with 8 mm dia. 1.20 metre long flexible tube and wall hook of Jaguar make or equivalent.(ALD-CHR-573) as per instruction of EIC.

Providng and fixing Corner Glass Shelf (with Bracket) (Jaguar make or equivalent)(ACN-1173)

Providng and fixing Wall Mixer with Provision for overhead Shower with 115mm Long Bend Pipe on Upper Side, Connecting Legs & Wall Flanges (Jaguar make or equivalent) (CQT-23273UPR) as per instruction of EIC.

Providing and fixing Maze overhead shower 300mm round shape single flow(body & face plate stainless steel with chrome finish)with rubit cleaning system ( Jaguar make or equivalent)(OHS-CHR-1633)

Providing and fixing rimless single piece Wc with UF soft close seat cover,tornado flushing ,hinges, fixing accessories set,cistern fittings,S-trap 300mm. ( Jaguar make or equivalent)(OPS-WHT-15851SN)

Providng and fixing Table Top Basin, Size: 485 x 370 x 150mm (Jaguar make or equivalent) (SLS-WHT-6901) with Single Lever Basin Mixer without Popup Waste with 450mm Long Braided Hoses (Jaguar make or equivalent)(KUP-35011BPM ) and with Waste coupling 32mm Size Half Thread with 80mm height (Jaguar make or equivalent) (ALD-709 ) complete in all respect as per EIC.

Providng and fixing Towel Rack 600mm Long Without Lower Hangers but with 3 hooks(Jaguar make or equivalent) (ACN-1181FHN)

Providng and fixing 2 Way Bib Cock with Wall Flange(Jaguar make or equivalent) (KUP-35041P)as per instruction of EIC.

Providing and fixing Angular Stop Cock with Wall Flange (Jaguar make or equivalent)( KUP-35053PM ) complete in all repsect as per EIC.

Providing and fixing waste coupling 32 mm size half thread with 80 mm height(ALD-709)(jaquar or equivalent)

P&F soap dish holder of Jaguar make or equivalent .(ACN-1131N)

P&F PVC water tank cover including fixing and fiiting complete in all respect

Providing and fixing Sunmica for wood work as per instruction of EIC.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).

Sal wood

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :

Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.

Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Neat cement punning.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :

Water thinnable cement primer

French spirit polishing :

One or more coats on old work

Distempering with 1st quality acrylic washable distemper (ready made) of approved manufacturer and of required shade and colour complete. as per manufacturer's specification.

One or more coats on old work

Finishing walls with Acrylic Smooth exterior paint of required shade:

Old work (One or more coat applied @ 0.90 ltr/10 sqm).

Providing and fixing white vitreous china water closet squatting pan (Indian type) :

Long pattern W.C. pan of size 580 mm

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :

Flat back wash basin of size 630x450 mm

Flat back wash basin of size 550x400 mm

Providing and fixing kitchen sink including making all connections excluding cost of fittings.

White glazed fire clay sink of size 600x450x250 mm

Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in- charge

Anodized (AC 15 ) aluminium

Providing and fixing brass stop cock of approved quality :

15 mm nominal bore

20 mm nominal bore

Providing and fixing brass bib cock of approved quality :

15 mm nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. INTERNAL WORK - EXPOSED ON WALL

15 mm dia nominal bore

20 mm dia nominal bore

25 mm dia nominal bore

40 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work

15 mm dia nominal bore

20 mm dia nominal bore

25 mm dia nominal bore

40 mm dia nominal bore

50 mm dia nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

25 mm nominal bore

40 mm nominal bore

50 mm nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions :

30 cm length

15 mm nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :

15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

40 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :

15 mm nominal bore

Providing and fixing single 15 mm C.P. brass pillar tap complete in all respect as per instruction of EIC.

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :

100 mm diameter

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 5.50 mm thickness

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.

With stainless steel cover plate minimum 1.25 mm thickness

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

For fixed portion

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :

25 to 40 mm nominal bore

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :

Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern

Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

15mm nominal bore

Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :

15 mm to 40 mm nominal bore

Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge:

Up to 150 mm diameter

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge.

With cement mortar 1:4 (1 cement : 4 fine sand)

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.

Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms

Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. INTERNAL WORK - EXPOSED ON WALL

20 mm nominal outer dia Pipes

25 mm nominal outer dia Pipes

40 mm nominal outer dia Pipes

50 mm nominal outer dia Pipes

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.

15 mm nominal bore, 105 mm long, weighing not less than 138 gms

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.

20 mm nominal bore, weighing not less than 40 gms

25mm nominal bore, weighing not less than 62 gms

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places."

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete :

25 mm dia

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :

150 mm diameter

Providing and fixing CP towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm.

Providing and fixing of 20 mm ply board of suitable make conforming to CPWD specifications as per instruction of EIC

Providing and fixing of Water proof ply 12 mm thick of suitable make conforming to CPWD specifications as per instruction of EIC.

Providing and fixing Central Hole Basin Mixer without Popup Waste System with 450mm Long Braided Hoses (15mm Cartridge Size) (Jaguar make or equivalent)( SOL-6001B) complete in all repsect as per EIC.

Providng and fixing Wall Mixer with Provision for overhead Shower with 115mm Long Bend Pipe on Upper Side, Connecting Legs & Wall Flanges (Jaguar make or equivalent) (CQT-23273UPR) as per instruction of EIC.

Providing ans pasting of metallica II wall paper of approved manufacture with using fevicaol and other chemical in proper portion as aadhesive for pasting on wall paper,wall paper should be pasted on wzall faces fre from wrinkles and as directed by Engineer in Charge including tools and tackles complete

Supplying,P & F Deck vertical blind complete in all respect

Supplying,P & F Deck roller blind complete in all respect

Providing and fixing Aquafree urinal Kit (Hindware make or equivalent) for water less urinals complete in all respect as per instruction of EIC

Providing and fixing seat cover wall hung (WC) (Hindware make or equivalent) complete in all respect as instruction of EIC.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :

1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for :

Foundations, footings, bases of columns, etc. for mass concrete

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Columns, Pillars, Piers, Abutments, Posts and Struts

Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge:

All kinds of soil

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Laying old cement cocrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineerin- charge. (Old CC paver blocks shall be supplied by the department free of cost).

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved s;ze, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology.

15 mm nominal bore

Deduct for not providing hinges in doors, windows or clerestory window shutters with :

Stainless steel butt hinges with stainless steel screws :

For 2nd class teak wood and other class of wood shutters

Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with :

Decorative veneer facings of approved manufacture

Wall lining butch work upto 10m height with Dholpur stone 40 mm thick rough facing on the exposed surface with stone strips of minimum length 300 mm and required width, including embedding every tenth layer and bottom most layer in masonry or concrete after making necessary chases of size 75x75 mm and by providing layer of 75 mm thick strips i/c 12 mm thick bed of cement mortar 1:3 (1 Cement : 3 coarse sand) i/c ruled pointing in cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment to match the shade of stone complete as per direction of EIC.

Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge.

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

Providing and fixing concealed hinge of approved quality for 19-20mm thick door with stainless steel screws complete :

Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately)

Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete.

75mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum plaster board conforming to IS: 2095: (part I): 2011 (Board with BIS certification marks)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. INTERNAL WORK - EXPOSED ON WALL

20 mm nominal outer dia Pipes

25 mm nominal outer dia Pipes

32 mm nominal outer dia Pipes

15 mm nominal outer dia Pipes

Providing and fixing to existing door frames.

35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineer- in-charge.

Non decorative finish (matt finish)

Providing and fixing PTMT pillar cock of approved quality and colour

15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms

Supplying ,P&F Sun control films complete in all respect

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

75 mm diameter(12

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

75 mm bend

Single tee with door

Coupler

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :

Providing and fixing bright finished brass handles with screws etc. complete:

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Fixing chowkhat in existing opening in brick/ RCC wall with dash fasteners/ Chemical fasteners of appropriate size (3 nos on each vertical member of door chowkhat and 2 nos on each vertical member of window chowkhats), including Cost of dash fasteners/ chemical fastener.

Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.

Two or more coats on new work.

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.

On concrete work.

Providing M.S welding rod of size 3.15mm

Providing and laying matt finished Parking tile of size 400x400x12mm (Kajaria or equivalent make ) having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).

Light shade pigment using white cement

Removing and uprooting of unwanted Vegetation grown over the drainage pipes, walls, chhajjas, balcony and similar locaton of building upto floor Vth level with all tools & plants required with safety precautions and making good the same with plaster including disposal of material / tree roots etc. at the required place all complete as per instruction of EIC.

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).

Size of Tile 600x600 mm

Providing and laying of cement based high polymer modified quick set tile ahdesive(water based) conforming to IS:15477 use for fixing of tiles(ave.thickness 6mm) ete as per direction of Engineer-in-charge.

Size of Tile 600x600 mm

Lettering with black Japan paint of approved brand and manufacture

Writing of quarters name and no. on ACP Sheet with vinyl pasting of suitable size as per site requirement

Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.

Beyond 30 cm girth upto and including 60 cm girth

Beyond 60 cm girth upto and including 120 cm girth

Beyond 120 cm girth upto and including 240 cm girth

Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.

2 mm thick corrugated (2.5" or 4.2" or 6") or step-down (2" or 3" or 6" ) as specified

Regular Deployment of Manpower for attending day to day petty unmeasureable work as per instructions of EIC (in case the minimum skilled workers as detailed below are not found at site then double deduction will be made as per prevailing minimum wages per no. of deficiant manpower)

Mason - 2 Nos Per day

Helper - 4 Nos Per Day

Carpenter - 3 Nos Per day

Plumber - 2 Nos Per Day

Sweeper - 3 Nos Per Day

Welder - 1 No Per day

IN NIGHT

Plumber - 1 No Per day

Management Team

Facility Manager for heading the entire facility team of Office and Residential Complex and Single point of contact & overall in charge of FM On-site Operations and reporting to engineer-incharge or his representative.01 No.

Asst. Facility Manager (Technical) for supporting Critical Services Operations & reporting to Facility Manager. 03 Nos

Part (D) UPKEEPING WORK OFFICE

CARRIAGE OF MATERIALS: By Mechanical Transport including loading, unloading and stacking: Lime, moorum, building rubbish, Lead- 5 Km

Cleaning of surface drain including disposal of muck/sludge through trolley or other arrangement to a specified place(in no case it shall be kept on drain banks) within a lead of 1Km complete with all tools & tackles as per instruction of EIC: Upto 300m wide

Brooming & cleaning of all roads within the premises of service building and other places as required with all tools & tackles and stacking the garbage at specified place as per instruction of EIC.

Cleaning of all types of roof including removal of dry leaves, weedings and cleaning dram holes, brooming etc. all complete with tools & tackles and stacking the garbage at specified places as per instruction of EIC.

Disposal of dead animal including transportation to the specified place, making earth pit, disposal of dead animal into pit with adequate quantity of salt, lime bleaching power etc. and refilling the pit with earth all complete with tools, tackles and consumables as per instruction of EIC: Big animal (Cow,Buffalo,OX and the like)

Disposal of dead animal including transportation to the specified place, making earth pit, disposal of dead animal into pit with adequate quantity of salt, lime bleaching power etc. and refilling the pit with earth all complete with tools, tackles and consumables as per instruction of EIC: Small animal (Dog,Cat,fox,pig,birds and the like)

Cleaning of toilet with attached with hostel rooms, office chambers etc. including cleaning of floors, skirting & dado, WC pan(India/European type),wash basin, shelves, mirror and other fittings, if any, by hand dusting and cleaning with soap solution, acids, deodorants, phenyl etc. to make the toilet clean and hygienic and providing naphthalene balls in urinals complete with all tools, tackles & consumables as per instruction of EIC (for community & service building one time/day)

Cleaning of general/common toilet including cleaning of WC pan (Indian/European type) wash basin, urinals by hand dusting and cleaning with soap solution, acids, deodorants, phenyl etc. to make the toilet clean and hygienic and providing naphthalene balls in urinals complete with all tools, tackles & consumables as per instruction of EIC(Six time /day)

Cleaning of Inspection chamber of all sizes and disposal of sludge etc. all specified place outside the colony with all leads including removal & replacing of top cover, mending the damages of cover and chamber, if any etc. as per instruction of EIC.

Cleaning of chocked sewer line & sludge line of all dia meters including removal of earth opening of joints, cleaning of pipe line, making joints leak proof etc. all complete including disposal of sludge materials outside the colony with all leads at specified place with tools & tackles as per instruction of EIC.

Cleaning of roof top water tank, including draining out water, cleaning, disinfecting the tank, by bleaching power etc. and washing the tanks with fresh water, writing of cleaning date with paint on the outer face of the tank all complete with tools, tackles and consumables as per instruction of EIC.

Cleaning of Septic tank of 20 users capacity with tools & tackles including disposal of sludge material outside the periphery of colony with all leads at a specified place complete as per instruction of EIC.

Cleaning of door shutter, window shutters including chowkhats, window grills, glass panes, cobwebs etc. of service/community buildings with necessary detergents, chemical etc. complete as per instruction of EIC.

Cleaning, mopping & washing of floor of public buildings other places neatly with detergents, bleaching power etc. all complete with tools, tackles and consumable to make the floor clean & hygienic as per instruction of EI..

Engagement of manpower on Holidays/ Sundays etc.

Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

Cleaning of Aquarium with maintenance for a period of two years as :Proper medicine as and when required,Maintenance and replacement of electrical items,Sixteen no.fishes are to be maintained throughout the period

Supply of fish food grain as per satisfaction of EIC.

Engagement of manpower for CMD and Director"s secretariat office (with all cleaning materials) by deplyoing 6 laborers as per following arrangement(CMD office 1No.,Director"s office 4Nos, CVO office 1No.) etc.( Double recovery against supply of less numbers of laboures)

Cleaning, mopping & washing of floor and brooming inside premises , cleaning toilets of public buildings i.e. Co-oprative,TA maintenance,booster pump house ,filter plant and other places neatly all complete with tools, tackles and consumable to make the floor clean & hygienic by engaging 2Nos sweepers as per instruction of EIC.(Deduction will be made @ double the minimum wages rate , if less man power engaged.)

Brooming & cleaning of road from old ATM gate to officer club and other places as required with all tools & tackles and stacking the garbage at specified place as directed by authorised incharge of work, complete by deploying 02 labours per day as directed by EIC .Note : Deduction will be made @ double the prevailing minmum wages rate if less manpower engaged

Providing one No. Female attendent in shishu kaksh carring of child and one No. attendant as care taker for board room complex at NCL HQ Singrauli ,by deplyoing laboures per day as per following arrangement. i)Shishu Kaksh(1No.). ii)Board Room(1No.) . ( Double recovery against supply of less numbers of manpower.

Officers club

Daily cleaning ,sweeping and mopping of toilets including removal of spider web, sanitary fixtures like wash basin mirror WC pan (Indian and European type) urinal stall , toilet floor and walls upto dado level i.e. the glazed tiles fixed on the wall Excluding cost of consumable materials with sweeping, cleaning and mopping of Auditorium stage,green rooms ,toilets, VIP room, 2 Nos. with attached toilet entrance lobby corridor and verandah, computer center, Badminton hall with stage 3 Nos. room , Dinning hall kitchen and toilet including periferial drain court yard , fountain lawn area and complete premises of Officer’s club Brooming(inside and outside upto road) including removal of spitting stains from wall, floor door etc and collection and disposal of garbage(within a distance of 2 kms) generated during any occassion/function such as marriage parties ,birthday parties,official functions etc. by deploying 3 Nos.(3 Nos.semi skilled ) labourers per day as per following arrangement. i). Ist shift:1 No. ii). 2nd shift:1 No. iii). 3rd shift : 1 No. At officers club and as directed by EIC Note : Deduction will be made @ double the prevailing minmum wages rate if less manpower engaged

Workers club

Daily cleaning, sweeping and Moping of toilets including removal of spider web, sanitary fixtures, like wash basin, Mirror,WC pan (Indian type and European type) urinal stall, toilet floor and wall upto dead level i.e The glazed tiles fixed on the wall excluing cost of consumable materials , sweeping cleaning and mopping of pantry,3 nos hall,corridor 2 nos ,passage Brooming complete premises of workers club(inside and ouside upto road), gate ,cycle stand ,drain etc including renoval of spitting stains from wall ,floor ,door etc.and collection and disposal of garbage(within a distance of 2 kms) generated during any occassion/function such as marriage parties ,birthday parties,official functions etc.as directed by authorised incharge of work, complete by engaging 3 Nos.(3 Nos.semi skilled ) labourers per day as per following arrangement. i). Ist shift:1 No. ii). 2nd shift:1 No. iii). 3rd shift : 1 No. At workers club and as directed by EIC Note : Deduction will be made @ double the prevailing minmum wages rate if less manpower engaged

Non Residential Building CETI

Day to day cleaning and upkeeping of CETI Training Institute building, MDI inside and out side, drain floor and mopping of door and window, floor dusting of table, chair and cleaning of toilets,Pantry, urinals, kitchen plateform, chocked sewer lineand sludge line of all diameter , collecting of waste material and its disposal in dustbin. Consumable items like phenyl etc. as per instruction of Engineer in charge by engaging 5 Nos. of labours per day including one safai karmchari. Garbage of dustbin should be removed/ disposed twice in a week (Deduction will be made @ double the minimum wages rate , if less man power engaged.)

Day to day cleaning and upkeeping of Sports complex at CETI including tennis court by cleaning of floor cleaning land lmopping of doors windows, dusting of table, chairs and cleaning of toilets, pantry land urinals by inclusive consumable items like Vim powder, phenyl etc as per instrucltion of EIC by engaging 8 Nos. labourers per day as per following arrangement. i). Ist shift:2 Nos. ii). 2nd shift:2 Nos. iii). General shift : 4 Nos. Deduction will be made @ double the minimum wages rate , if less man power engaged.)

Brooming & cleaning of road from CETI main gate to NH 39 Junction including railway under pass and other places as required with all tools & tackles and stacking the garbage at specified place as directed by authorised incharge of work, complete by deploying 02 labours per day as directed by EIC Note : Deduction will be made @ double the prevailing minmum wages rate if less manpower engaged

Cleaning, mopping & washing of stair case ,landing and access of room floor of shringavali height D & C block building other places neatly with detergents, bleaching power up to 5th floor etc. all complete with tools, tackles and consumable to make the floor clean & hygienic as directed by authorised incharge of work, complete by deploying 04 labours per day as directed by EIC Note : Deduction will be made @ double the prevailing minmum wages rate if less manpower engaged

Part-(E)Central Hospital Singrauli

Cleaning of toilet,floor of rooms&corridor,dusting of furniture,cleaning of door,windows and walls, to give bed pan,urinal pot and cleaning them,to clean martury box, to washing and cleaning of hospital linen soiled with stool,urine,pus,blood etc,to carry stool and urine samples to the lab of hospital (excluding the cost of cleaning material)

General shift - 13 nos NOTE: Deduction will be made @ double the prevailing minimum wages rate, if less manpower engaged.

2nd shift - 4 nos & Night shift - 3 nos = 7nos NOTE: Deduction will be made @ double the prevailing minimum wages rate, if less manpower engaged.

Cleaning of toilet floor ,dusting of furniture,cleaning of door,windows and walls etc.of OT and ICU room of hospital.(excluding the cost of cleaning material)

Part G Colony Upkeep

PART-(F) UPKEEPING WORK Morwa colony

Upkeeping of all type residential areas (like D,C,CH,,T-II, T-I, B, 1-B, 1C,A, HB, LCH, MDS, and TSM Quarters) by sweeping of road, cleaning of drain & collection of waste materials from road, berms inside, back side around the Quarters and stacking the same at suitable places as per instruction of EIC. The colony area shall be cleaned at all time to the satisfaction of departement by way of engaging 50 nos. labours. Penal deduction will be made @ double the rate of manpower for less engagement of manpower.(Sweeping & cleaning- Main road daily,Branch road weekly,Drain weekly)

Cleaning of toilet including cleaning of dado, skirting W/C pan etc.(Weekly)

D type quarter for area upto 10 sq meter daily.

C type quarter or equivalent for area upto 8 sq meter alternate days.

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m. All kinds of soil.

Collection of garbage from door to door and disposal of same through closed vehicle or other suitable arrangements to the specified place with lead of 1 km including sweeoing of staircase (For 1st and 2nd floor quarters) with all tools and tackles as per instruction of EIC.(Including sunday/holiday)

Ground floor (1050 nos. x 627)

First floor (168 nos. x 627)

Second floor (124 nos. x 627)

Up keeping and maintenance of residential quarters, CMD and Directors bunglow,CVO bungalow ,road,drain,berm and other open space.i/c cleaning of sewer line ,chambers and septic tanksi/c horticulture related works by deplyoing 60 laborers.( Double recovery against supply of less numbers of laboures)

Supply of cleaning material

Mosquito repellent liquid refill (allout or equivalent

Toilet Soap small 30 gram

Insect Killer Spray(Black hit or equivalent)

Supply of Urinal Pad/Screen complete in all respect.

Flower broom (phool jhadu)

Broom stick

Phenyl liquid (Doctor brand or equivalent)

Washing powder

Harpic

coline(500ml)

Phenyle ball (12 in Nos.)

Duster cloth

Mopping cloth

Room spray (200ml)

Toilet air freshner (Odonil or equivalent)

Hand gloves (for sanitation work)

Disposable mask

Hand wash refill 750 ml (Dettol or equivalent)

Bleaching powder

Copper or any other metal utensil washing powder (Pitambari or equivalent)

Part (G) Horticulture Work (Office, Hospital, Officers Club, CH-01)

Earth work in surface excavation not exceeding 30 cm in depth but exceeding1.5 m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, as per directions of Engineer in Incharge: All kinds of soil

Carriage of material by Mechanical Transport including loading, unloading and stacking

Earth Lead - 2 Km

Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment).

Supplying and stacking at site dump manure from approved source, including carriage upto 5 km complete (manure measured in stacks will be reduced by 8% for payment) :

Screened through sieve of I.S. designation 20 mm

Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge

Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).

Supplying and spreading of Jamuna sand/ River sand in Lawn area, including watering, mixing and dressing complete

Fine dressing of the ground.

Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation.

Providing and fixing Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and even, watering with sprinkler.

Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).

Weeding out of lawn by removal of all weeds and other wild growth with roots by forking including disposal of garden rubbish with all loads and lifts complete if top dressing required paid separately (cost of manure, sludge or extra good earth to be paid for separately) as per direction and satisfaction of officer in charge

Where weeds upto 25%

Cutting of Hedge/Edge including removing of cut material, cleaning, hoeing of hedge/edge bed watering, manureing and applying insecticides and fungicides etc.(excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge.

Complete maintenance of trees (Out side garden features), jobs like making of basin at regular interval i/c watering, weeding, pruning & application of fertilizer etc, (excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge.

Trees for 300 No. (4-8 & 5-6 year Slow & Fast growing group)

Maintenance of Potted Plants at Nursery in Earthen pot including resetting/ displaying at Nursery, including watering, weeding, hoeing, colouring, transplanting the damaged pots and disposal of generated garbage at specified place as per direction of officer-in-charge. (Good earth, manure, fertilizer, insecticide & pesticide shall be provided by the department) (For Earthen pot 2000 Nos)

Maintenance of potted plant Earthen pot in displayed at ground floor only in bungalow,office complex including application of good earth, manure, insecticide, pesticide and fertilizer, removing of dry parts by pruning, cleaning dry leaves and displaying in appropriate place and replacement of broken pots coloring of pots and change of location of pots and replacing with fresh plants as and when required ( Materials shall be provided by the department) as per direction of officer in charge (For Earthen pot 750 Nos)

Maintenance of potted plants Earthen pots in displayed at multi storied office buildings,flats and ground floor bungalow,office complex including application of good earth, manure, insecticide, pesticide and fertilizer,removing of dry parts by pruning, cleaning dry leaves and displaying in appropriate place and replacement of broken pots coloring of pots and change of location of pots and replacing with fresh plants as and when required ( Materials shall be provided by the department) as per direction of officer in charge (For Earthen pots 250 Nos)

Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, hedge, flower beds, foliages,creepers etc. including hoeing,weeding pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter , removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and menure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide ,Pesticide will be provided by the department & lawn mover and brush cutter with fuel ,other T & P material/articles shall be provided by thecontractor.)Permanent office accommodation. (as per yard stick 1Mali =1.25Acre)

Topairy cutting/shapping of plant removing of cut materials, cleaning, hoeing of plants complete design hoeing of trees (Topairy) watering manure etc.(excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge as per direction of officer in charge.

Height of Topairy upto 120 cm.

Height of Topairy above 120 cm.

Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water)

Trees Plant

Shrubs Plant

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.

All kinds of soil

Providing and displaying of Areca Palm plant, having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 20 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge.

Providing and displaying of Araucaria cookie plant, having ht. 60 cm to 75 cm, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 20 cm size of Earthen pot / Plastic pot. & as per direction of the officer-in-charge.

Providing and displaying of Croton Baby Golden Punctatumaureum plant, having ht. 23 cm to 30 cm, well developed with fresh and healthy foliage in 15 cm size of Earthen pot / Plastic pot. as per direction of the officer-in- charge.

Providing and displaying of Croton Duck foot (Elite) plant, having ht. 45 cm and above with 3 to 4 branches, well developed, fresh and healthy leaves in 25 cm size of Earthen pot / Plastic pot. & as per direction of the officer-in- charge.

Providing and displaying of Phoenix palm plant, having ht. 75 cm to 90 cm with 10 to 15 or more leaves, well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge.

Providing and Displaying plants Chrysenthemum double variety, well developed, having 45 to 60 cm ht., with 6 and above flowers with half blooming condition, fresh and healthy with bamboo stacking in 25 cm Earthen Pot and as per direction of the officer-in-charge.

Providing and Displaying plants Budded Rose (H.T. variety) 3 to 4 healthy branch 30 cm and above ht. well developed with one and above flower plant in 20 cm Earthen Pot, as per direction of the officer-in-charge.

Providing and Displaying Fishtail palm plant well developed with fresh & healthy foliage leaves of ht 210 to 240cm Specimen plant in 35 cm Cement Pot as per direction of the officer-in-charge.

Providing and displaying of Syngonium golden plant, mounted on moss stick 90 cm ht., 3 to 4 plants placed in each pot at equal distance, well developed with full of fresh & healthy leaves from bottom to top in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge

Providing and displaying of Syngonium Variegated plant, mounted on moss stick 90 cm ht., 3 to 4 plants placed in each pot at equal distance, well developed with full of fresh & healthy leaves from bottom to top in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge.

Providing and Displaying of Duranta Golden plant, having ht.15 to 20 cm bushty shape plant with fresh and healthy leaves in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge..

Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge.Top inside dia 30 cm, outer bottom dia 20 cm, total height 30 cm with wall thickness of 25.4 mm

Anti termite treatment by digging pits 30 cm deep and 4 cm dia, 6 to 7 holes around the tree using chemical emulsion at the rate of 1.5 liter per hole in two time or more application to get the trees free from termite infection chemicals used Chlorpyriphos 20% EC in the ratio of 1% concentration and as per direction of officer-in-charge.

Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in 499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area.(two application) i/c cost of chemical)and as per direction of officer-in-charge.and as per direction of officer-in-charge.

Providing & fixing of White River (Stone) Pables size of 2" to 2.50" dia in natural colour at site of work including loading, unloading, carriage and all taxes paid etc.and as per direction of officer in charge.

Removal of garden waste by TATA 407 or equivalent including loading/ unloading and carriage upto 1 km lead,complete disposal upto designated place as per direction of officer-in-charge .

Cleaning and Sweeping of Lawn / Garden area and keep it neat and clean by mechanized method / manually, remove litter,debries, picking of leaves, papers, plastic bottles etc. including disposal of collected waste in dustbin/ designated place, as per direction of officer -in- charge (All T & P, materials/ articles shall be provided by the contractor.) For Other Prime Area.

Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge.

Antirrhinum dwarf

Calendula double

Carnation (double) Lilyput

Cosmos hybrid

Dahlia double

Dianthus hybrid

Gazania hybrid

Gerbera hybrid double

Marigold French Hybrid dwarf

Marigold inca hybrid

Nasturtium

Petunia hybrid

Salvia Hybrid different colour

Verbena hybrid

Chrysenthemum Double

Supplying and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge.

Balsum seedling

Cosmos hybrid

Gaillardia Double

Kochia

Zinnia hybrid

Finishing walls with water proofing cement paint of required shade :Old work (one or more coats @ 2.20 kg/10 sqm) complete.

Non schedule Item

Supply of good quality earthen pot 300 mm size

Supply of insectisides,fungicides,pesticides and Fertilizers at site.

Supply of Fertilizers at site(CETI&OFFICE)

Bone meal

Rose mixture

Neem cake

Melathion

Roger 30%

Sarson Khalli

Providing flower garland in two shramik statues.

Providing table bouquet for directors office.

Providing Bouquet for CMD Office

Supply of Pitambari powder for Cleaning of Brass Planters.

Part (H) CETI Horticulture Part A ( as per DSR 2018)

Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge.

Petunia hybrid

Aster dwarf

Calendula double

Antirrhinum dwarf

Carnation (double) Dutch

Carnation (double) Lilyput

Carnation hybrid

Gazania hybrid

Gerbera hybrid double

Dahlia double

Dianthus hybrid

Marigold inca hybrid

Pansy Hybrid

Salvia

Salvia Hybrid different colour

Verbena hybrid

Cosmos hybrid

Marigold French Hybrid dwarf

Chrysanthemum (double)

Supplying and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge.

Balsum seedling

Celosia argentea & Celosia cristata Hybrid

Cosmos hybrid

Gaillardia Double

Gomphrena

Kochia

Portulaca hybrid

Sunflower Dwarf

Vinca Hybrid

Zinnia hybrid

Supplying and stacking at site dump manure from approved source, including carriage upto 5 km complete (manure measured in stacks will be reduced by 8% for payment) :

Screened through sieve of I.S. designation 20 mm

Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).

Carriage of material by Mechanical Transport including loading, unloading and stacking

Lime, moorum, building rubbish Lead - 1 Km

Earth Lead - 1 Km

Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment).

Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).

Fine dressing of the ground.

Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge

With grass Turf

Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, hedge, flower beds, foliages, creepers etc. including hoeing,weeding pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter , removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and menure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide , Pesticide will be provided by the Department & lawn mover and brush cutter with fuel , other T & P material/articles shall be provided by the contractor.)

Permanent office accommodation. (as per yard stick 1Mali =1.25Acre)

Providing and displaying plants Budded Rose ( HT variety) 3-4 healthy branch 30 cm and above ht well develop with 1 and above flower plant in 20 cm Earthen Pot, as per direction of the officer in charge.

Part-A (Non-DSR Item)

Supplying of different variety of sesonal flower seed and vegitable seeds

Flower seeds (General)

Flower seeds (Hi breed)

Vegitable seeds (General)

Vegitable seeds (Hi breed)

Supply of good quality pots

Earthen pots 12" size

Mosaic pots 15" size

Painting of flower pots as per instruction of Engr in charge.

Earthen pots 12" size

Mosaic pots 15" size

Complete maintenance of horticulcture of the Shringavali Height building entire area i.e. lawn trees, shrubs, hedge, flower beds, foliages,creepers etc. including hoeing,weeding pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter , removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and menure and maintenance of other garden related works by engaging 2 labours per day as directed by EIC (Cost of Good Earth, Manure, Fertilizer, Insecticide ,Pesticide will be provided by the contractor & lawn mover and brush cutter with fuel ,other T & P material/articles shall be paid separately)Public Parks..( Double recovery against supply of less numbers of laboures)

Part (I) Horticulture Stadium/Residential

Up keeping and maintenance of Stadium road,drain,berm ,stair case and other open space.i/c cleaning of toilet, sewer line ,chambers, operation of pump and i/c horticulture related works by deplyoing 6 laborers as per following arrangement i)Sweeping & cleaning bath and stair case-2Nos ii)Jungle cleaning 1No. iii)Garden & Pump operation -3Nos.( Double recovery against supply of less numbers of laboures)

Topairy cutting/shapping of plant removing of cut materials, cleaning, hoeing of plants complete design hoeing of trees (Topairy) watering manure etc.(excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge as per direction of officer in charge.

Height of Topairy above 120 cm.

Up keeping and maintenance of horticulture related works by deplyoing 6 laboures per day as per following arrangement. i)Vikash Kunj(3Nos). ii)Shiv Kunj(1No.) iii).CVO bunglow(1No.) and iv)Basant Kung(1No) ( Double recovery against supply of less numbers of laboures)

Supplying and stacking at site dump manure from approved source, including carriage upto 5 km complete (manure measured in stacks will be reduced by 8% for payment) :

Screened through sieve of I.S. designation 20 mm

Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment).

Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).

Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge

Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge.

Aster dwarf

Calendula double

Chrysanthemum double

Dahlia double

Daisy hybrid

Dianthus hybrid

Gazania hybrid

Marigold inca hybrid

Petunia hybrid

Salvia Hybrid different colour

Verbena hybrid

Supplying and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge.

Celosia argentea & Celosia cristata Hybrid

Cosmos hybrid

Kochia

Vinca Hybrid

Zinnia hybrid

Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts.

Providing and displaying of Areca Palm plant, having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 20 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge.

Providing and displaying of Araucaria cookie plant, having ht. 1.20 m to 1.35 m, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge.

Providing and displaying of Croton baby golden variety plant, having ht.30 cm and above, well developed with full of fresh and healthy leaves in 20 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge.

Providing and displaying of Croton Duck foot (Elite) plant, having ht. 45 cm and above with 3 to 4 branches, well developed, fresh and healthy leaves in 25 cm size of Earthen pot / Plastic pot. & as per direction of the officer-in- charge.

Providing and displaying of Phoenix palm plant, having ht. 75 cm to 90 cm with 10 to 15 or more leaves, well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge.

Providing and Displaying Cycus cirsnallis plant well developed with fresh & healthy 35 to 40 lush green leaves in 40 cm Cement Pot as per direction of the officer-in-charge.

Maintenance of Potted Plants at Nursery in Earthen pot including resetting/ displaying at Nursery, including watering, weeding, hoeing, colouring, transplanting the damaged pots and disposal of generated garbage at specified place as per direction of officer-in-charge. (Good earth, manure, fertilizer, insecticide & pesticide shall be provided by the department) (For Earthen pot 3000 Nos)

bone Meal

Neem Cake

Sarso Khali

Part (J) External Water Supply Maintenance. Part( A)(Non DSR)

Lifting the damaged submersible pump and motor cable etc replacing it with working one and lowering the pump and motor assembly includingcable in bore holes dismentling the pipe during lifting and fixing the pipe during lowering with all materials and labour tools and plant etc complete as per inst. of EIC.

Repairing of submersible Pump & motor with motor winding of submersisble pump set including changing of oil seal , rotor bush, oring impellers etc as required as per instruction of EIC with a guarantee period 6 Months

I). 5 HP to 7.5 HP

ii).10HP to 15hp

Repairing of kirloskar make surface motor replacment of old winding and re-wiring of motor as designed and repaired damaged parts as required all complete as per instruction of EIC. With guarantee period of 6 Months.

Monoblock

Providing/supply of spare parts of kirloskar make for monoblock DSM-2, DSM-3 and DSM-5 as given below:

Bearing of pumps

i).Mono block:6305

ii).DSM-2 : 6306

iii).DSM-3: 6307

iv).DSM-5 :6309

Bearing of Motor

I).Mono block : 6308

ii).DSM-2 : 6209

iii).DSM-3 : 6310

iv).DSM-5 : NU 318 ECJ

v). DSM5 : 6314 C3

Shaft

Housing

Coupling

Providing gland packing of champion make of approved quality as per instruction of EIC.

Providing M-seal of approved quality.

Providing GI flange of heavy quality (Heavy duty)

50mm dia size

80mm dia size

100mm dia size

Providing GI socket 50mm dia size long thread of heavy lduty

Supply of submersible cable of ISI marked and approved quality of 6 sqmm( 3 core 1.1 KV) as per instruction of EIC.

Providing and fixing of G.I. Pipe 50mm dia heavy quality.

Operation of pump and motor for residential & non-residential water supply by engaging 16 Nos. semi skiled labourers per day as per instrucltion of EIC.Deduction will be made at double rate in case of non/less deployment of labour on prorata basis.

Operation of pump and motor at Madhauli Nallah by engaging 4 Nos.(3 Nos.semi skilled + 1 No. unskilled) labourers per day as per following arrangement. i). Ist shift:1 No. ii). 2nd shift:1 No. iii). 3rd shift : 1 No. iv). Night guard: 1 No. (unskilled) All complete as per instruction of EIC.Deduction will be made at double rate in case of non/less deployment of labour on prorata basis.

Supply & stacking in position of Alum etc complete as per instruction of EIC.

Supply & stacking in position of Lime etc complete as per instruction of EIC.

Repairing of sluice valve spindle by breezing proper machinery as per instruction of EIC

50mm to 80mm size

100mm to 150 mm size

150mm and above size

Providing steel spindle for different size sluice valve

50mm to 80mm size

100mm to 125mm size

Providing grease of standard quality for pump and motor

Providing CI sluice valve 50mm size

Providing CI sluice valve 80mm size

Providing NRV (Vertical)100mm size

Providing key of different size of pump and motor

Cleaning of ground reservoir tank by flushing water containing bleaching powder

Cleaning of ground water reservoir including scraping of stains and muck from wall & floor and removal of muck from reservoir, disinfecting the tank by lime/bleaching power etc, and washing the tank with fresh water ,writing the cleaning date with paint on the outer surface of the tank all complete with tools, tackles and consumables as per instruction of EIC..at CETI, Shivkunj & Booster pump house.

Cleaning of over head tank

Cleaning of madhauli filter plant tank.

Providing G.I.pipe (medium quality)

100mm dia size

125mm dia size

150mm dia size

Providing & coupling bush of approved quality as per instruction of EIC.

Providing & coupling bolt of standard quality as per instruction of EIC

Providing GI tee 80mm size standard quality as per instruction of EIC.

Providing G.I.bend approved quality as per inst. Of EIC.

50mm dia size

80mm dia size

100mm dia size

Supply of ISI Marked Direct On-Line Starters confirming to IS : 13947-4 with suitable over load relay range and contactor size, 415 V , 3 -Phase with two earthing terminals

0.75 / 1.0 / 2.0 / 3.0 / 5.0 / 7.5 HP i.e. upto 7.5 HP

Supplying and fixing of capacitor duty contactor of approved make in existing power factor/LT panel including connections etc.as required as per specification.For 10 kVAR 440V,3Ph,50Hz, Aux contact-1NO

Part (K) External Water Supply Maintenance. Part( B)( DSR 2018)

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

Providing and laying flanged CI standard specials lsuch as tees, bends, collars, tapers, caps etc lsuitable for flanged jointing as per IS:1538 upto 300mm dia.

Providing flanged joints double flanged CI/DI pipes and specials including testing of joints 200mmdiameter pipe.

Providing and laying S&S CI standard specials such as tees, bends, collars, tapers, cap etc (Heavy class): upto 300mm dia.

Providing lead caulked joints to spun iron or CI pipes and specials including testing of joints but excluding the cost of pig lead :200mm diameter pipe.

Providing & fixing ball valve (brass) if approved quality. High or low

25mm dia

20mm dia

Supplying pig lead at site of work

Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS:1536 200mm dia pipe.

P&F CI sluice valve (with cap) complete with bolts, nuts rubber insertions etc ( the tail pieces if required lwill be paid separately): class-I.

100mm dia

125mm dia

150mm dia

200mm dia

P&F gun metal gate valve with CI wheel of approved quality (Screwed end):

25mm dia

32mm dia

40mm dia

50mm dia

80mm dia

P&F of gun metal non-return valve of approved quality(Screwed end): Vertical

80mm dia

50mm dia

P&F GI pipe complete with GI fittings including trenching and refilling etc external work.

20mm dia

25mm dia

32mm dia

40mm dia

50mm dia

65mm dia

80mm dia

P&F GI union in GI pipe including cutting and threading lthe pipe and making long screws etc complete (New work).

20mm dia

25mm dia

32mm dia

40mm dia

50mm dia

65mm dia

80mm dia

Supply of bleaching powder

Supply of nut bolt of full thread of approved quality

Rubber gasket

G.I. Nipple

15mm dia

20mm dia

25mm dia

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.

15 mm nominal bore, weighing not less than 32 gms

Providng and fixing 2 Way Bib Cock with Wall Flange(Jaguar make or equivalent) (KUP-35041P)as per instruction of EIC.

a.)G.I Plug 20mm

b.)G.I Plug 25mm

Adhesive solution UPVC (237ml)

Spendle with washer for pillar cock

UPVC Coupler 50 mm

UPVC Coupler 25 mm

PVC Washer

PVC Bib Cock 15 mm Dia

UPVC PIPE 50MM DIA

UPVC Pipe 25mm dia

UPVC Flange 50mm dia

UPVC Flange 80mm dia

UPVC Fittings Elbow 25 mm

UPVC Fittings Elbow 50 mm

Ball Valve (UPVC) : 25 mm dia

Ball Valve (UPVC) : 50 mm dia

Reducer Tee 50x25mm

End Cap : 25mm dia

End Cap : 50 mm dia

CPVC fitting : Coupling : 15mm dia

CPVC fitting : Coupling : 20mm dia

CPVC fitting : Coupling : 25mm dia

Elbow : 15mm dia

Elbow : 20mm dia

Elbow : 25mm dia

Tee 25x25x20mm

Reducing Coupling

Ball Valve 20mm

Adhesive solution for CPVC (237ml)

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.

On concrete work.

Providing M.S welding rod of size 3.15mm

Providing & fixing following ductile iron double flanged check valvewithout damper (non-returnvalve) including jointing & testing with cost of jointing material such as bolts,nuts and rubber insertion all complete as per IS : 5312 (Part II)

200mm dia CLASS PN-16

Providing and Supplying Blue MDPE pipes conforming to ISO 4427:1996 manufactured from virgin resin PE 80 Food grade compounded Raw Material having Blue Colour only with quality assurance certificate from quality agencies like WRC/CIPET (India)/ DVGM /KIWA /SPGN etc. for usage in Drinking Water System The cost shall include testing of all materials, Inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete.

10 Kg/sq.cm:

32 mm dia

50 mm dia

TAKING OUT FALLEN SUBMERSIBLE PUMPING SET FROM TUBE WELL

7.5 to 12.5 HP - Depth up to 150 mtr.

REPAIRING OF SUBMERSIBLE MOTOR PUMP SET

Removing the old burn winding from stator & cleaning of slot then complete rewinding of submersible motor by using PVC insulated ISI marked quality copper conductor with suitable gauge including insulating material like bamboo, strip, fire proof papers, leeve, cotton tape, PVC tape including cable jointing of motor.

Single phase 100 mm dia

Providing & Fixing of New rotor

1 HP (100 mm dia)

Above 6.0 to7.5 HP (150 mm )

Above 7.5 to 10 HP (150 mm )

G.I. Elbow

15mm dia

20mm dia

25mm dia

40mm dia

50mm dia

Supplying and laying of approved make stainless steel wire rope 6 mm thick complete with binding for support of pump and motor

Supplying and laying of approved Make Nylon rope 12mm thick complete with binding for support of pump and motor

Part (L) Pest Control

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :

Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole :

With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Supplying chemical emulsion in sealed containers including delivery as specified.

Chlorpyriphos/ Lindane emulsifiable concentrate of 20%

Anti Adult Measures-General disinfection/pest control with a new generation odourless,colourless insecticides which should be safe for human being and effective for all kind of household insects like mosquitos,houseflies etc.Using residual spray of Deltamethrin in 2.5% SC fLOW (K Othrine or approved equivalent).Insecticides should be sprayed uniformly over the surfaces of wall,ceiling,etc.Frequency -once in 3 month

Anti Adult Measures-General disinfection/pest control with a new generation odourless,colourless insecticides which should be safe for human being and effective for all kind of household insects like mosquitos,houseflies etc.Using residual spray of Cyfluthrin 5% EW(Solfac EW OSO or approved equivalent).Insecticides should be sprayed uniformly over the surfaces of wall,ceiling,etc.Frequency -once in 3 month

Thermal fogging-Using insecticide Deltamethrin 1.25% ULV (Kingfog or approved equivalent) mixed with diesel into the ratio pf 1:199 for outdoor operation of colony etc. Frequency-Monthly.

Anti Larvae Measures-Treatment by using Diflubenzuron 25% WP(Bi-Larv or approved equivalent) solution should be spread as per instructionof EIC.Frequency-Weekly

Processing of solid waste colleted at collection point / transfer point near gas godown after further segregation (bio degredable and non bio degredable waste) and conversion of it into suitable / useful material i.e. Khad etc. by using bacteria in required quantity with all necessary tools and tackles by deploying minimum manpower (Waste handling worker 7Nos,Project Coordinator/Supervisor 1No, Choukidar/Security 1Nos.) in proper uniform wearing safety equipments such as Helmet , hand gloves, mask etc., as per instruction of EIC complete in all respect and inclusive of contractors profit.

Transportation of non bio degredable waste to cement factory including loading/unloading etc. complete in all respect inclusive of all the expenditure(like toll,challan etc) incurred during transportation.

A) Frame work: Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6 mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically & horizontally) or at required spacing near opening, with necessary welding at junctions and fixing the frame to wall/ ceiling/ floors with steel dash fasteners of 8 mm dia, 75 mm long bolt, including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer-in-charge. B) Sides and backing: Providing and fixing 12mm thick Pre-laminated medium density fibre board exterior grade(Grade-I)IS:14587:1998 marked to frame backing or studding with screws etc complete. C) Shelves: Providing and fixing 25mm thick Pre-laminated medium density fibre board conforming to IS:14587:1998 marked with one side decorative lamination and other side balancing lamination Grade-I(exterior grade).In shelves with screws and fitting wherever required edges to be seald with PVC edge bending tape 2.00mm thick of approved brand. D) Shutters: Providing and fixing 25mm thick Pre-laminated medium density fibre board conforming to IS:14587:1998 marked with one side decorative lamination and other side balancing lamination , for file cabinet shutters edges to be seald with PVC edge bending tape 2.00mm thick of approved brand.including ISI marked nickel plated bright finishing M.S. pino hinges Conforming to IS:3818 with necessary screw etc. all complete. E) Fittings: i) Pproviding and fixing required no. of chromium plated brass handles (Size:75mm) with necessary screws etc. comlete as per direction of EIC. ii) Providing and fixing special quality chromium plated brass cupboard locks with six levers(Size 75mm) of approved quality including necessary screws etc. complete.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.

All kinds of soil

Extra rates for quantities of works, executed

In or under water and/or liquid mud, including pumping out water as required.

Providing and fixing factory made solid Foam uPVC profile for kitchen cabinet frame (45 x 20 mm) of approved shade, quality and make. The profile shall be laminated on both sides, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and the exposed edges sealed with PVC edge beading of same shade and colour. The frame shall be fire retardent with necessary screw holding capacity. Frame shall be fixed to wall using Expendable Fastner with necesary stainless steel screws, all complete as per direction of Engineer-incharge.

Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw holding capacity. Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge.

Providing and fixing concealed hinge of approved quality for 19-20mm thick door with stainless steel screws complete :

Slider Channel soft closing make Hettich,KAF or equivilent.

Basket Made up of ss wire of required size make Hettich or equivilent.

Providing and fixing chromium plated brass handles with necessary screws etc. complete:

Supply of C.I. foot valve 125mm dia.

G.I. Socket

15mm dia

20mm dia

25mm dia

40mm dia

Part - I : Service

Electrical Repair and Maintenance of CMD Office Complex including Rest Houses with sufficient workmen and T&P required for maintenance for Two years and the work shall be executed as per site requirement and as per instructions of Engineer Incharge (Required Manpower shall be minimum 2 nos. Skilled + 2 nos. Unskilled, as scope of Work)

Part - II : Replacement of existing fixtures by new for CMD Office Complex, VIP Guest Houses (old fittings shall be deposited at deptt.)

LED panel light fitting size of 1feet x1feet suitable for 18 to 24 watt, 230Volt AC complete in all respect with suitable drivers & others accessories as per IS specification.

LED panel light fitting size of 2feet x 2feet suitable for 36 watt, 230Volt AC color temp.3000-6500K as per site requirement complete in all respect with suitable drivers & others accessories as per IS specification.

LED recessed down light fitting having 6 watt in existing size, 230Volt AC complete in all respect with suitable drivers & others accessories as per IS specification.

LED recessed down light fitting having 12 watt in existing size, 230Volt AC complete in all respect with suitable drivers & others accessories as per IS specification.

LED tube light fitting with rod suitable for 20 watt, 230Volt AC as per IS specification.

LED tube light fitting suitable for 10 watt, 230Volt AC as per IS specification.

LED bulb suitable for 15 watt, 230Volt AC as per IS specification.

S.P. 5/6 amps, one way switch, piano type ISI marked, 230V, AC

Bell push switch, piano type 230V AC as per IS specification

S.P. 5/6 amps, two way switch, piano type ISI marked

3 pin 5/6 amps socket outlet, piano type ISI marked

S.P. 5/6 amps, one way modular switch, ISI marked

S.P. 5/6 amps, two way modular switch, ISI marked

3 pin 5/6 amps modular socket outlet, ISI marked

S.P. 15/16 amps, one way switch, piano type ISI marked

6 pin 15/16 & 5/6 amps socket outlet, piano type ISI marked

S.P. 15/16 amps, one way modular switch, ISI marked

6 pin 15/16 amps modular socket outlet, ISI marked.

PVC Batten/ Angle Holde suitable for two pin type bulb as per IS specification.

15/5Amp., 230V AC, flush type combined piano type (switch & socket) matching to existing design as per IS specification.

Call bell suitable for 230V AC type - musical/ dingdong/Buzzer as per IS specification .

Wireless attendant calling system with 8nos calling remote , range of communication minimum 100mtrs , 230V 50Hz AC. Complete in all respect as per IS specification

Remote Call bell, battery operated with ISI marked

Pencil cell 1.5V DC suitable for remote call bell as per IS specification.

9 volt battery suitable for Remote Call / cord less bell as per IS specification.

12 volt pencil cell / battery suitable for Remote Call bell as per IS specification.

6Amp., 230V AC, 3 pin plug top as per IS specification.

16Amp., 230V AC, 3 pin plug top as per IS specification.

Flush type board fuse suitable for 10Amp, 230V AC matching to existing design as per IS specification

Electronic regulator piano type for ceilling fan suitable for 230V AC, 300W matching to existing design as per IS specification.

Stepped type Modular Fan regulator (2 module) as per IS specificatiion.

Blanking plate suitable for one modules as per IS specification.

2.5 MFD fan condensor suitable for 230/415V AC as per IS specification.

1.5 MFD fan condensor suitable for 230/415V AC as per IS specification.

4.0 MFD fan condensor suitable for 230/415V AC as per IS specification.

6.0 MFD fan condensor suitable for 230/415V AC as per IS specification.

6 amps. to 32 amps. ratings , SP MCB, “C” curve, 10 KA breaking capacity as per IS specification.

6 amps. to 32 amps. ratings , DP MCB, “C” curve, 10 KA breaking capacity as per IS specification.

6 amps. to 32 amps. ratings , TP MCB, “C” curve, 10 KA breaking capacity as per IS specification.

63 amps., 4 pole isolator as per IS specification.

Self adhessive PVC electrical insulation tape 15mm width x 10mtr length x 0.125 mm thickness as per IS specification.

Rubber tape 2" wide, 0.5mm thick 10Mtr long suitable for HT/LT cable jointing works as per IS specification.

Twin core FRLS PVC sheathed, flat flexible copper cable size of 0.5Sqmm

Three core, PVC insulated, flexible copper cable, size of 1.5 Sq mm, 1100 Volt grade as per IS specification.

Three core, PVC insulated, flexible copper cable, size of 2.5 Sq mm, 1100 Volt grade as per IS specification.

Three core 6sq. mm, PVC insulated flexible copper cable, 1.1KV grade unarmoured as per IS specification.

Four core 6sq. mm, PVC insulated, flexible copper conductor 1.1KV grade copper cable unarmoured as per IS specification.

Four core 6sq. mm, PVC/ XLPE insulated, PVC outer sheathed, copper conductor , 1.1KV grade, armoured cable as per IS specification.

Wiring material like different size of wooden board with sunmica top, casing, caping, different size of copper wire etc. As following ;

1.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable as per IS specification,

2.5 Sq mm, single core FRLS copper wire, PVC insulated, 1100 Volt grade as per IS specification.

4.0 Sq mm, single core FRLS copper wire, PVC insulated, 1100 Volt grade .as per IS specification,

6.0Sq mm, single core FRLS copper wire, PVC insulated,1100 Volt grade as per IS specification.

1.0Sq mm, single core FR copper wire, PVC insulated, 1100 Volt grade as per IS specification .

PVC casing - caping size 20mm dia with ISI marked

Mounting plate (front plate with base plate) white finish of different module range, as requirement, suitable for fixing switch/socket matching to existing design as per IS specification;

Two module

Three module

Four modules

6 module

8 module

12 module

Mounting box/concealed metal box of different module range, as requirement, suitable for inner & outer mounting plates, matching to existing design as per IS specification;

Two module

Three module

Four modules

6 module

8 module

12 module

MCB distributiion box suitable for fixing of MCB's matching to existing design of following size as per IS specification;

2+2 way SPN Single door

2+4 way SPN Single door

2+6 way SPN Single door

2+10 way SPN Single door

6way SPN double door

8way SPN double door

12way SPN double door

14way SPN double door

4way (4+12) TPN, double door

Sheet steel MCB enclosure suitable for following sizes as per IS specification;

Double Pole enclosure

Tripple Pole Enclosure

Switch Disconnector Fuse Unit in sheet steel enclosure with HRC fuses suitable for 415V, 50Hz AC of following rating as per IS specification;

32A, TPN, 415V AC

63A, TPN, 415V AC

100A, TPN, 415Volt AC

200A, TPN, 415Volt AC

400A, TPN, 415Volt AC

630A, TPN, 415Volt AC

HRC fuse (blade/DIN type) matching to existing design suitable for 230/415V AC of following rating as per IS specification;

100A, 415Volt AC

250A, 415Volt AC

400A, 415Volt AC

630A, 415Volt AC

HRC fuse (bolted type) matching to existing design suitable for 230/415V AC of following rating as per IS specification;

100A, 415Volt AC

250A, 415Volt AC

400A, 415Volt AC

630A, 415Volt AC

Residual Current Circuitt Breaker 415V, 50Hz AC of following rating as per IS specification;

25A, DP, 30mA rating, 230V AC

40A, DP, 30mA rating, 230V AC

63A, DP, 30mA rating, 415V AC

63A, FP, 30mA rating, 415V AC

Moulded Case Circuitt Breaker 415V, 50Hz AC of following rating as per IS specification;

4 pole MCCB, 125A, 36KA as per IS specification

4 pole MCCB, 200A, 36KA as per IS specification

4 pole MCCB,250A, 36KA as per IS specification

4 pole MCCB,400A, 50KA as per IS specification

4 pole MCCB,630A, 50KA as per IS specification

Change over switches in sheet enclosure conforming to IS : 4064/IS : 13947 (part I & III) with side handle operated 4 pole with two earthing terminals of following rating as per IS specification;

200Amp 415/ 500 Volts, AC . (off load)

400Amp 415/500 Volts. (off load)

630Amp 415/500 Volts. (off load)

Copper lug of following rating. Dowels or any standard make with ISI marked

16 Sqmm Copper

25 Sqmm Copper

35 Sqmm Copper

50 Sq mm copper

70 Sq mm copper

95 Sq mm copper

120sq. mm copper

150sq. mm copper

185sq. mm copper

240sq. mm copper

Electronics drivers suitable for existing LED fitting of following ratings as per IS specification;

6watt, 230Volt AC

12watt, 230Volt AC

18watt, 230Volt AC

24watt, 230Volt AC

0.5W, 230V LED bulb, red/green colour lamp/ bulb.

Porceline kit-kat fuse grips (base & carrier) complete suitable for following rating as per IS specification.

Wooden/ PVC Board with sheet on top of following size as per IS specification;

Size of 4"x4"

Size of 7"x4"

Size of 8"x6"

Size of 8"x10"

LED fountain light RYB colour, 230V 50HZ

Section - B

Wiring for light point/ fan point/ exhaust fan point / call bell point with 1.5Sq mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate , suitable GI box and earthing the point with 1.5 Sq mm FRLS PVC insulated copper conductor single ciore etc. complete in all respect as per site requirement & direction EIC. All materials should be as per IS specification.

Supply & fixing of modular switch 5/6A on the existing modular plate & switch box including connection etc complete in all respect as per site requirement & direction of EIC. All materials should be as per IS specification.

Supply & fixing of modular switch 5/6A & socket 3 pin 5/6A on the existing modular plate & switch box including connection etc complete in all respect as per site requirement & direction of EIC. All materials should be as per IS specification.

Wiring for circuit/ submain wiring alongwith earth wire with 2x4 sqmm+ 1x4 sqmm for earth wire FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required etc complete in all respect as per site requirement & direction of EIC for power CKT wiring. All materials Should be as per IS Specification

Supply of materials and concealed / surface wiring ( as per requirement) for power point with 2.5 Sq.mm PVC insulated, 1.1KV grade copper cable/ wire (Phase & Neutral) including 16/6 Amp modular switch socket /combined, MS board / GI box /teak wood board with bakelite sheet on top as per requirement , with 1.5 Sqmm PVC insulated cable/wire for earth wire which shall be run with wiring inside the PVC conduit/ casing caping. etc. complete in all respect.& direction of EIC.All materials Should be as per IS Specification

Wiring for circuit/ submain wiring alongwith earth wire with the 2x2.5 Sqmm and 1x2.5 Sqmm earth wire FRLS PVC insulated copper conductor, single core in surface /recessed medium class conduit etc complete in all respect as per site requirement & direction of EIC.

Supply & fixing of DP MCB enclosure sheet steel including connection work etc.complete in all respect as per site requirement (MCB shall be supplied by deptt & all others materials should be as per IS specification.).

Supply & fixing of TP MCB enclosure sheet steel including connection work etc.complete in all respect as per site requirement (MCB shall be supplied by deptt & all others materials should be as per IS specification.).

Supply & fixing of wooden board size of 8"x10" with sunmica top including fixing of the old/new switches & socket (switch & socket shall be supplied by the deptt.

Supply & fixing of wooden board size of 8"x6" with sunmica top including fixing of the old/new switches & socket (switch & socket shall be supplied by the deptt.

Supply & fixing of wooden board size of 7"x4" with sunmica top including fixing of the old/new switches & socket (switch & socket shall be supplied by the deptt.

Supply & fixing of wooden board size of 4"x4" with sunmica top including fixing of the old/new switches & socket (switch & socket shall be supplied by the deptt.

Supply & Laying of 2x6sq. mm, PVC insulated, PVC sheathed,1.1KV grade, armoured, heavy duty, ISI marked, twin core aluminium conductor cable with 10SWG GI wire in open air from pole to internal main switch/ external main switch for replacement of service line connection work including fixing/saddling of cable on wall with suitable size of PVC conduit etc. complete with connection work. Note- Old /Burnt service connection wire/cable to deposited at site store & all others materials should be as per IS specification.)..

Supply & Laying of 2x10 sq. mm, PVC insulated, PVC sheathed,1.1KV grade, armoured, heavy duty, ISI marked twin core aluminium conductor cable with 10SWG GI wire in open air from pole to internal main switch/ external main switch for replacement of service line connection work including fixing/saddling of cable on wall with suitable size of PVC conduit etc. complete with connection work. Note- Old /Burnt service connection wire/cable to deposited at site store & all others materials should be as per IS specification.)..

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling / wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Dismantaling of ceiling fan and painting the same with one or more coats of spray painting with synthetic enamel paint of approved brand and manufacture to give an even shade including cleaning of surface with detergent and replacing the damaged rubber reel, nuts and bolts with wahsers and safety pins, re-installing the same with connection work etc. complete in all respect as per site requirement & direction of EIC.

Dressing of old/damaged wiring with casing-caping /PVC conduit & others required materials like screw, PVC gully/ ditofix, saddle etc. complete in all respect.

Dressing of old/damaged wiring without casing-caping /PVC conduit & others required materials like screw, PVC gully/ ditofix, saddle etc. complete in all respect.

Dismantling of existing light/ fan/ bell/ socket out let point on separate board/ wiring and circuit with insulated wire in casing/conduit/ batten complete with fitting and accessories

Cleaning , overhauling, servicing of ceiling / exhaust/ wall fan by applying grease & oil, including testing with mounting/ hanging arrangement including arrangement of safety pins, check nuts, lock nu, nut bolts etc, making perfect alignment & refitting at site etc.complete in all respect as per site requirement & direction of EIC.

Installation , testing & commissioning of ceiling fan including wiring the down rod of standard length upto 30cm with 1.5 Sq mm FRLS PVC insulated copper conductor, single core cable etc. complete in all respect.

Section - C

Contract for operation of 33/11KV Sub-station, 2x250KVA DG & 2x400KVA Office DG sub-station and 1 X 160 KVA Central Hospital DG substation with their associated equipments at NCL HQ Singrauli with sufficient work man and T&P required for operation as detailed in the NIT document and the work shall be executed as per instruction of EIC. (Required Manpower shall be minimum 10 nos. Skilled + 3 nos. Unskilled, as per Scope of Work)

Section - D

Rewinding of old ceiling fan of different size / make by copper enameled wire of suitable guage including all required materials, insulation varnishing, connection leads oiling ,greasing etc complete with testing including dismentalling & refitting of fan at site. etc. complete in all respect as per requirement & direction of EIC.(Scrap old materials is not returnable to the deptt.)

Rewinding of old exhaust fan size of 450mm by copper enameled wire of suitable guage including all required materials, insulation varnishing, connection leads oiling ,greasing etc complete with testing including dismentalling & refitting of fan at site. etc. complete in all respect as per requirement & direction of EIC.(Scrap old materials is not returnable to the deptt.)

Rewinding of fresh air fan (Exhaust fan) upto 300mm sweep / wall bracket fan /cabin fan size of 400mm sweep by copper enameled wire of suitable guage including all required materials, insulation varnishing, connection leads oiling ,greasing etc complete with testing including dismentalling & refitting of fan at site. etc. complete in all respect as per requirement & direction of EIC.(Scrap old materials is not returnable to the deptt.)

Supply and fixing of main shaft of different size suitable to existing / rewinded ceiling fan of different size and make.

Supply and fixing of copper bush of different size suitable to existing / rewinded ceiling fan of different size and make.

Supply of clamp of different size suitable to existing / rewinded ceiling fan of different size with bolts , nuts etc.

Supply of rubber reel nut & bolts with washer and safety pin of different size suitable to existing / ceiling fan .

Supply and fixing & testing of sealed ball beating of reputed make suitable to existing/ rewound ceiling fan / exhaust fan of different size as below;

Sealed Ball Bearing No.6201

Sealed Ball Bearing No.6202

Sealed Ball Bearing No.6203

Sealed Ball Bearing No.6204

Section - E

"Contract for any type of breakdown for restoration of service on war footing for complete electrical power supply including internal & external electrification breakdown upto 33KV with their associated equipments at NCL HQ Singrauli with sufficient work man and T&P required for operation as detailed in the NIT document and the work shall be executed as per instruction of EIC. (Required Manpower shall be minimum 05 nos. Skilled + 04 nos. Unskilled, as per Scope of Work)

Section - F

Supply of M.S. nut, bolt & washer of different size as required.

Supply and erection of 100mmx 65mm LT pin insulator complete with GI spindle and nuts etc as required. on bracket/ pole. L.T. Pin insulator

Supply and erection of 100mmx110mm LT shackle insulator complete with GI spindle and nuts etc as required. on bracket/ pole.

Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required.

Supplying and erection of 11 KV disc insulator for 11 KV overhead lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as per site requirement & direction of EIC.

Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, bow tightener, 7/ 4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Supplying and drawing guard wire/earth wire/ bearer wire 18.62 sq mm 4.87mm. Dia /6swg) G.I. including stringing, binding at existing insulators or brackets, jointing, jumpering, connecting & cradle etc. as per side requirment and direction of EIC.

Providing & making cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for 11KV, OD termination, 3 C X 70-120 sq. mm.XLPE cable, as required as per IS specification and direction of EIC

Providing & making cable straight joint with heat shrinkable jointing kit complete with all accessories including lugs suitable for 11KV, 3 C X 70-90 sq. mm.XLPE cable, as required as per IS specification and direction of EIC

Supply & making cable Straight joint with heat shrinkable jointing kit complete with all accessories including lugs suitable for 1.1KV, XLPE/HD Straight through joint (ID/OD), 4C X 70-95 sq. mm XLPE cable, as required as per IS specification and direction of EIC

Supply & fixing anti climbing device with 2 ply G.I. barbed wire 1 Kg. per pole complete as per Specification.

Excavation for cable trenches of depth upto 1.2 m in soft soil including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres .( Length & breadth shall be as per site requirement.)

Concreating of pole and stay with cement concreat of ratio 1:4:8 (1cement, 4 stone chips, 8 sand).

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Supply, fabrication and erection of angle/ channel/ flat iron fitting for overhead line & sub-station etc. such as 'D' bracket,cross arms, top clamp, 'V' cross arms, back/support clamp or other similar work etc. including nut bolts of required size, making holes, fabrication, welding, cutting, etc. and painting with one coat of red oxide paint & two coat of aluminium paint as required as per specification.

Laying, stringing and sagging of wolf/dog conductor including jointing wherever required pin binding with Al. binding wire jumpering by approved PG clamps/Al. wires.

Erection of steel tubular or rail pole strut in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling and secured with holding clamps, bolts,nuts, etc. as required.

Erection of 11KV Grade isolator including fixing of related angle, chanels, etc.and erection of shor pole if required.LT pin, shackle insulator with hardware on bracket/pole.

Dismantling of 1.1KV/ 660V grade shackle / pin insulator and deposit the same at site store.

Fixing of street light fitting with bracket of required angular shape and size pipe bracket on wall/pole including M.S. clamp not less than 40X5mm flat, nut, bolt 12mm of required length with necessary material including connection 3 core flexible wire etc. complete as required excluding cost of pipe paid separately.

Dismantling of existing water tight fitting S.V/M.H/ L.E.D lamp fitting with extension bracket, clamp from pole or wall with making the site clear.

Dismantling of existing steel pole, R.S. Joist, girder with bracket clamp insulator or stay from the cement concrete foundation and making the site clear by refilling the pit to ground level i/c transportation to required destination within township

Dismantling of existing overhead ACSR, AAAC, GI (7/14SWG earth wire) conductor and making the site clear i/c transportation to required destination within township.

Dismentling of 11KV disc/pin insulator from pole bracket and deposit the same to the site store.

Dismentelling of L.T.and H.T. cables size of 35mm2 to 185mm2 from cable trench, refilling trench upto ground level and deposit the same to the site store.

Painting of pole, brackets, clamps and bracing etc. with one coat of red oxide and two coat of Al. paint including cost of paint/red oxide, preparation of surface and numbering of pole as per direction of EIC.

Painting of DB/DG KIOSK /Panels/ tranformer etc. with synthetic enamel paint of approved brand & manufacture of required colour to give an even shed : two or more coats on new work over an under coat of suitable shed with ordinary paint of approved brand & manufacture etc. complete in all respect as per site requirement & direction EIC.

Transportation of 8/11/13/Mtr long tubular pole as and when required from any places as per directiion of EIC

Tree branch cutting /trimming under the overhead line and dispose/ throw it upto 50mtr.

Cleaning of Transformer switchyard i.e. cleaning of all type of dirt, dust & dry leaves, washing of stone chips, uprooting of grass and again spreading of stone chips in proper way as per direction of EIC.

Repair & Maintenance of 11 KV isolater i.e. cleaning of isolater unit ,setting of isolater male & female contacts in proper ON & OFF position, checking and teightining of pad & conductor & replacement of faulty spares if required. (Spare shall be provided by deptt.)

Dismentalling of old jumpers of each phase / binding of HT& LT overhead lins / cable binding and jumpering/ binding with new binding wire after cleaning the surface of cable or ovrhead termination ends.(Binding will be provided by deptt.)

Dismentalling of faulty cable from overhead line, locate the fault, rectify the fault, cover with PVC insulating tape, water profing with M-Seal materials, again jumpering the same cable in overhaed line with new binding wire.(Binding will be provided by deptt.)

Section - G

Part-I: Supply & replacement / fixing cost of Part for 1x160KVA DG sets at Central Hospital

Lube oil filter

Water filter

Fuel water seperator

Air Filter

Premix radiator coolant 10Ltrs pack

Premix radiator coolant 5Ltrs pack

Battery water 5Ltrs

Maxtherm lube oil 20 ltr. Pack

Gen inspection & Repairing Charges

Part-II: Supply & replacement / fixing cost of Part for 2x200KVA DG sets at CETI

Element air filter, (A042M071)

Element air filter, (A042M070)

Filter Fuel (3954904)

Filter Fuel (3978040)

Cartridge , Lube oil filter

Premium Blue 7800 {Plus 20Ltrs}

Premium Blue 7800 {Plus 5Ltrs}

Funnel fuel filter conductive -M

Gen inspection & Repairing Charges

Part-III: Supply & replacement / fixing cost of Part for 2x250KVA DG sets at CMD office complex

Premium Genuine oil 20 Ltrs can

Premium Genuine oil 13 Ltrs can

Spin on Lube oil filter

Fuel Filter Kit 1.1 Ltr

Spinon Assembly Kit

Air Cleaner Primary Element

Air Cleaner Safety Element

Poly V Belt 8PK 1065

Poly V Belt 4PK 1515

Genuine Coolant Premix 10 Ltrs can

Genuine Coolant Premix 5 Ltrs can

Gen inspection & Repairing Charges

Part-IV: Supply & replacement / fixing cost of Part for 2x400KVA DG sets at CMD office complex

Premium Genuine oil 50 Ltrs can

Lube oil filter (DV0.014.11.0.00)

Lube oil filter (DV0.014.27.0.00)

Fuel Filter Cartridge

Fuel Filter & water separator

Air Cleaner Safety Element

V Belt BX58

V Belt SPBAR1230(3 No. Set)

Air Cleaner Primary Element

Genuine Coolant Premix 10 Ltrs can

Genuine Coolant Premix 5 Ltrs can

Gen inspection & Repairing Charges

Part-V: General spares/ part replacement

O' Ring

Set of water Hoses

V-belt

Cogged Belt

Paper insert - oil Centrifuge

Self starter 24V

Set of sealing ring

Indicating lamp MCC 24V

Section -H

Operation & Comprehensive maintenance work for 722.55 TR HVAC System / package Air Conditioner including 72TR Ductable split unit (Required Manpower shall be minimum 5 nos. Semiskilled as per Scope of Work)

Comprehensive maintenance and servicing of air conditioner of following type and capacity including replacement with new compressor , and related parts such as capacitors, relay,electronic controls, PCB, display, thermostate, remote control and related accessories, rewinding of fan/ blower motor. flushing of cooling & condensing unit with nitrogen gas, required refrigerent gas charging & rectification of leakage, replacement of filter, flair nut etc. complete in all respect as per site requirement & direction of EIC for Two years. (Inventory to be maintained as per list provided in scope of work ) Qty. for two years (Required Manpower shall be minimum 7 nos. Skilled + 3 nos. semiskilled as per scope of work)

30 nos Window type Air Conditioners 1.5 TR

445 nos. Split type wall mounted AC single phase 1.5 TR

135 nos.Split type wall mounted AC single phase 2 TR/ 3 TR

02Nos Split type cassette / floor type AC single phase/ three phase 3.0 TR

110 Nos HVAC / Ductable / Package AC three phase 5/5.5TR

10Nos.HVAC / Ductable / Package AC three phase 7/7.5TR

7 Nos.HVAC / Ductable / Package AC three phase 8.5TR

Comprehensive maintenance of 79Nos. Single/Double door Refrigerator upto 300 ltr capacity/ Water Cooler/ Deep Freezer / Mortuary including replacement of compressor, and related parts such as condenser, relay, electronic controls, display, thermostat, and all related accessories, rewinding of motor, flushing of cooling & condensing units with nitrogen gas, required refrigerant gas charging & rectification of leakage, replacement of lamp, etc. if any. (Inventory to be maintained as per Annexure-II) Quantity has been taken for 2 years

Supply, Installation, Transportation, Testing & commissioning of new or in good working conditions room Air / Desert coolers of exchast/cooling fan type dia. not less than 16"/ Air delivery 2800 cum/Hrs on hire basis. This scope of work includes running and maintenance filling of water, for runing round the clock and providing required man power/technician for regular water filling / maintenence/dismentalling and taking back to the contractors premises etc. including supply of spairs, T&P complete as per required for there use at diffrent estabileshment of NCL HQ Singrauli.(123 nos. for 12 months, 6months in each year)

Total impact of GST for the purpose of CTC

Please Enable Macros to View BoQ information