RENOVATION OF BUILDING NO.0202 OF QUALITY LABORATORY OF UNIT-03 (INITIATORY GROUP) INSIDE FACTORY AREA OF OFBL.

Amount

RENOVATION OF BUILDING NO.0202 OF QUALITY LABORATORY OF UNIT-03 (INITIATORY GROUP)INSIDE FACTORY AREA OF OFBL.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for as per direction of E-I-C.

M & L for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes.(cement plaster 1:4) as per the direction of Engineering-In-charge .

M & L for virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as per the direction of Engineering-in-charge .

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1: 4. ( with modular bricks) includung curing etc as per direction of EIC .

M & L for rendering 12mm thick plaster on fair faces of brick work or concrete surfaces in cement plaster ( 1:4) as per the direction of Engineering-in-charge.

M&L for mild steel TMT bars 6mm to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as per the direction of Engineering-in-charge .

M & L for P.C.C Type-I Grade M15 (1:2:4 ) mix using 20 mm graded aggregate as per the direction of Engineering-in-charge .

M&L for reinforced cement concrete ( nominal mix) type B1 (1:2:4) 20 mm graded concrete in chajja etc over 1.5m span as per the direction of Engineering-In-charge .

M&L for formwork to sides of rough finished flat surfaces of concrete to soffits of suspended slabs such as roof slabs, floor slabs, landings lintel, chajja etc and similar work; not exceeding 200mm thick (Horizontal or sloping) as per the direction of Engineering-In-charge.

M & L for 25mn thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite as per the direction of Engineering-In-charge.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth as per the direction of Engineering-In-charge .

M & L for distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work as per the direction of Engineering-In-charge .

M & L for anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified as per the direction of Engineering-In-charge .

S & F of sheet glass, ordinary quality 4.8mm thick and glazing with oil putty in square Exc.0.5 in each pane as per the direction of Engineering-In-charge ..

M & L for Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified as per the direction of Engineering-In-charge . .

S&F of Rough cast wired glass, 6.4mm thick and glazing with oil putty in square(Exc 0.5 but n exc 0.75 sqm ) as per the direction of Engineering-In-charge ..

RAJESH KUMAR PATRA

GANESH CHANDRA BEHERA